1
0
mirror of https://github.com/node-red/node-red.git synced 2023-10-10 13:36:53 +02:00

Chinese translations for core nodes (#1607)

* Fix typo

* Fix and Update some Chinese translations.

* Fix and Add Chinese translations to match all en-US's items
This commit is contained in:
Kroderia 2018-03-18 01:49:17 +08:00 committed by Dave Conway-Jones
parent b979b4e61a
commit 5d54ca7477
2 changed files with 257 additions and 173 deletions

View File

@ -5,7 +5,8 @@
"topic": "主题",
"name": "名称",
"username": "用户名",
"password": "密码"
"password": "密码",
"property": "属性"
},
"status": {
"connected": "已连接",
@ -13,7 +14,7 @@
"disconnected": "已断开",
"connecting": "连接中",
"error": "错误",
"ok": "确"
"ok": "确"
},
"notification": {
"error": "<strong>错误</strong>: __message__",
@ -37,17 +38,17 @@
"repeat": "重复"
},
"timestamp": "时间戳",
"none": "空白",
"interval": "间隔",
"interval-time": "特定时间内间隔",
"time": "定时间",
"none": "",
"interval": "周期性执行",
"interval-time": "指定时间段周期性执行",
"time": "定时间",
"seconds": "秒",
"minutes": "分钟",
"hours": "小时",
"between": "介于",
"previous": "之前数值",
"at": "在",
"and": "之间",
"and": "",
"every": "每隔",
"days": [
"星期一",
@ -59,18 +60,20 @@
"星期天"
],
"on": "在",
"onstart": "运行时注入?",
"tip": "<b>注意:</b> \"特定时间内间隔\" 和 \"特定时间\" 会使用cron系统.<br/> 详情查看信息页.",
"onstart": "立刻执行于",
"onceDelay": "秒后, 此后",
"tip": "<b>注意:</b> \"指定时间段周期性执行\" 和 \"指定时间\" 会使用cron系统.<br/> 详情查看信息页.",
"success": "成功注入: __label__",
"errors": {
"failed": "注入失败, 请查看日志"
"failed": "注入失败, 请查看日志",
"toolong": "周期过长"
}
},
"catch": {
"catch": "检测异常",
"catchNodes": "检测到 (__number__)",
"catch": "监测所有节点",
"catchNodes": "监测__number__个节点",
"label": {
"source": "检测错误来自",
"source": "监测范围",
"node": "节点",
"type": "类型",
"selectAll": "全选",
@ -79,14 +82,14 @@
},
"scope": {
"all": "所有节点",
"selected": "已选节点"
"selected": "指定节点"
}
},
"status": {
"status": "状态 (所有)",
"statusNodes": "状态显示 (__number__)",
"status": "报告所有节点状态",
"statusNodes": "报告__number__个节点状态",
"label": {
"source": "状态报告来自",
"source": "报告状态范围",
"node": "节点",
"type": "类型",
"selectAll": "全选",
@ -95,7 +98,7 @@
},
"scope": {
"all": "所有节点",
"selected": "已选节点"
"selected": "指定节点"
}
},
"debug": {
@ -104,7 +107,11 @@
"msgobj": "完整信息",
"to": "目标",
"debtab": "调试窗口",
"tabcon": "调试窗口及终端控制台",
"tabcon": "调试窗口及Console",
"toSidebar": "调试窗口",
"toConsole": "Console",
"toStatus": "节点状态 (32位字符)",
"severity": "级别",
"notification": {
"activated": "成功激活: __label__",
"deactivated": "成功取消: __label__"
@ -114,21 +121,21 @@
"name": "名称",
"filterAll": "所有节点",
"filterSelected": "已选节点",
"filterCurrent": "前流程",
"filterCurrent": "前流程",
"debugNodes": "调试节点",
"clearLog": "清日志",
"clearLog": "清日志",
"openWindow": "在新窗口打开"
},
"messageMenu": {
"collapseAll": "折叠所有路径",
"clearPinned": "清已固定路径",
"clearPinned": "清已固定路径",
"filterNode": "过滤此节点",
"clearFilter": "清除已设过滤"
"clearFilter": "清空过滤条件"
}
},
"link": {
"linkIn": "连接入口",
"linkOut": "连接出口",
"linkIn": "输入",
"linkOut": "输出",
"label": {
"event": "事件名称",
"node": "节点名称",
@ -144,16 +151,18 @@
"upload": "上传",
"cert": "证书",
"key": "私钥",
"passphrase": "密码",
"ca": "CA证书",
"verify-server-cert":"验证服务器证书"
},
"placeholder": {
"cert":"证书路径 (PEM 格式)",
"key":"私匙路径 (PEM 格式)",
"ca":"CA证书路径 (PEM 格式)"
"key":"私钥路径 (PEM 格式)",
"ca":"CA证书路径 (PEM 格式)",
"passphrase":"私钥密码 (可选)"
},
"error": {
"missing-file": "无证书/密匙文件提供"
"missing-file": "未提供证书/密钥文件"
}
},
"exec": {
@ -169,10 +178,10 @@
"extraparams": "额外的输入参数"
},
"opt": {
"exec": "当命令任务完成时 - exec 模式",
"spawn": "当命令任务进行时 - spawn 模式"
"exec": "当命令完成时 - exec模式",
"spawn": "当命令进行时 - spawn模式"
},
"oldrc": "使用旧式输出模式 (传统模式)"
"oldrc": "使用旧式输出 (兼容模式)"
},
"function": {
"label": {
@ -180,7 +189,7 @@
"outputs": "输出"
},
"error": {
"inputListener":"无法在函数里面加入对‘注入’事件的监视",
"inputListener":"无法在函数中监听对'注入'事件",
"non-message-returned":"函数节点尝试返回类型为 __type__ 的信息"
},
"tip": "可从信息页面查看更多关于如何编写函数的帮助"
@ -194,7 +203,8 @@
"output": "输出为",
"mustache": "Mustache 模版",
"plain": "纯文本",
"json": "解析JSON",
"json": "JSON",
"yaml": "YAML",
"none": "无"
},
"templatevalue": "This is the payload: {{payload}} !"
@ -204,13 +214,13 @@
"for": "时长",
"delaymsg": "延迟每一条信息",
"delayfixed": "固定延迟时间",
"delayvarmsg": "用 msg.delay 改写延迟时长",
"delayvarmsg": "允许msg.delay复写延迟时长",
"randomdelay": "随机延迟",
"limitrate": "信息速度限制",
"limitrate": "限制信息速率",
"limitall": "所有信息",
"limittopic": "每一个msg.topic",
"fairqueue": "轮流发每一个主题",
"timedqueue": "发所有主题",
"fairqueue": "依次发送每一个topic",
"timedqueue": "发所有topic",
"milisecs": "毫秒",
"secs": "秒",
"sec": "秒",
@ -218,10 +228,10 @@
"min": "分",
"hours": "小时",
"hour": "小时",
"days": "",
"day": "",
"days": "",
"day": "",
"between": "介于",
"and": "",
"and": "",
"rate": "速度",
"msgper": "信息 每",
"dropmsg": "不传输中间信息",
@ -245,14 +255,14 @@
"singular": "小时"
},
"day": {
"plural" : "",
"singular": ""
"plural" : "",
"singular": ""
}
}
},
"error": {
"buffer": "缓冲超过 1000 条信息",
"buffer1": "缓冲超过 10000 条信息"
"buffer": "缓冲超过 1000 条信息",
"buffer1": "缓冲超过 10000 条信息"
}
},
"trigger": {
@ -267,9 +277,9 @@
"latest": "最新信息对象",
"nothing": "无"
},
"wait-reset": "等待重置",
"wait-reset": "等待重置",
"wait-for": "等待",
"wait-loop": "重发",
"wait-loop": "周期性重发",
"duration": {
"ms": "毫秒",
"s": "秒",
@ -279,8 +289,8 @@
"extend": " 如有新信息,延长延迟",
"label": {
"trigger": "触发",
"trigger-block": "发并阻止",
"trigger-loop": "重发",
"trigger-block": "发并阻止",
"trigger-loop": "周期性重发",
"reset": "重置触发节点条件 如果:",
"resetMessage":"msg.reset已设置",
"resetPayload":"msg.payload等于",
@ -292,7 +302,7 @@
"title": "标题",
"body": "主体"
},
"tip": "提示: 主题内容可以添加格式化为 <a href=\"https://help.github.com/articles/markdown-basics/\" target=\"_blank\">Github 风格 Markdown</a>"
"tip": "提示: 主题内容可格式化为 <a href=\"https://help.github.com/articles/markdown-basics/\" target=\"_blank\">Github风格的Markdown</a>"
},
"unknown": {
"label": {
@ -307,7 +317,7 @@
"qos": "QoS",
"clientid": "客户端ID",
"port": "端口",
"keepalive": "存货定时器(秒)",
"keepalive": "Keepalive计时(秒)",
"cleansession": "使用新的会话",
"use-tls": "使用安全连接 (SSL/TLS)",
"tls-config":"TLS 设置",
@ -317,14 +327,14 @@
"tabs-label": {
"connection": "连接",
"security": "安全",
"will": "终结信息",
"birth": "初始信息"
"will": "Will信息",
"birth": "Birth信息"
},
"placeholder": {
"clientid": "留空白将会自动生成",
"clientid": "留白则自动生成",
"clientid-nonclean":"如非新会话必须设置客户端ID",
"will-topic": "留空白将禁止终止信息",
"birth-topic": "留空白将禁止初始信息"
"will-topic": "留白将禁止Will信息",
"birth-topic": "留白将禁止Birth信息"
},
"state": {
"connected": "已连接到服务端: __broker__",
@ -334,7 +344,7 @@
"retain": "保留",
"true": "是",
"false": "否",
"tip": "提示: 如果你想用msg属性来设置主题qos 或者是否保存,请将这几个区域留空",
"tip": "提示: 若希望通过msg属性对topic(信息), qos及retain(保留)进行设置, 则将上述项留白",
"errors": {
"not-defined": "主题未设置",
"missing-config": "未设置服务端",
@ -344,13 +354,13 @@
},
"httpin": {
"label": {
"method": "方法",
"method": "请求方式",
"url": "URL",
"doc": "文档",
"return": "返回",
"upload": "接受文件上传?",
"status": "状态码",
"headers": "头子段",
"headers": "Header",
"other": "其他"
},
"setby": "- 用 msg.method 设定 -",
@ -358,8 +368,8 @@
"use-tls": "使用安全连接 (SSL/TLS) ",
"tls-config":"TLS 设置",
"utf8": "UTF-8 字符串",
"binary": "二进制缓冲模块",
"json": "解析JSON对象",
"binary": "二进制数据",
"json": "JSON对象",
"tip": {
"in": "相对URL",
"res": "发送到此节点的消息<b>必须</b>来自<i>http input</i>节点",
@ -387,8 +397,9 @@
},
"listenon": "监听",
"connectto": "连接",
"payload": "发送/接受 有效载荷",
"message": "发送/接受 完整信息",
"sendrec": "发送/接受",
"payload": "有效载荷",
"message": "完整信息",
"tip": {
"path1": "默认情况下,<code>payload</code>将包含要发送或从Websocket接收的数据。侦听器可以配置为以JSON格式的字符串发送或接收整个消息对象.",
"path2": "这条路径将相对于 ",
@ -403,8 +414,8 @@
},
"watch": {
"label": {
"files": "文件(s)",
"recursive": "递归查看文件夹"
"files": "文件",
"recursive": "递归所有子文件夹"
},
"placeholder": {
"files": "逗号分开文件或文件夹"
@ -416,8 +427,8 @@
"type": "类型",
"output": "输出",
"port": "端口",
"host": "主服务器",
"payload": "有效载荷(s)",
"host": "主机地址",
"payload": "有效载荷",
"delimited": "分隔符号",
"close-connection": "是否在成功发送每条信息后断开连接?",
"decode-base64": "用 Base64 解码信息?",
@ -429,19 +440,19 @@
"type": {
"listen": "监听",
"connect": "连接",
"reply": "回应到 TCP"
"reply": "响应 TCP"
},
"output": {
"stream": "字串流",
"single": "单一",
"buffer": "缓冲模块",
"buffer": "Buffer",
"string": "字符串",
"base64": "Base64 字符串"
},
"return": {
"timeout": "在固定时间超时后",
"character": "当收到某个字符",
"number": "固定数目的字符",
"timeout": "指定时间后",
"character": "当收到某个字符",
"number": "指定字符数",
"never": "永不 - 保持连接",
"immed": "马上 - 不需要等待回复"
},
@ -452,8 +463,8 @@
"stopped-listening": "已停止监听端口",
"connection-from": "连接来自 __host__:__port__",
"connection-closed": "连接已关闭 __host__:__port__",
"connections": "__count__ 连接",
"connections_plural": "__count__ 连接"
"connections": "__count__ 连接",
"connections_plural": "__count__ 连接"
},
"errors": {
@ -463,7 +474,7 @@
"error": "错误: __error__",
"socket-error": "套接字连接错误来自 __host__:__port__",
"no-host": "主服务器和/或者端口未设定",
"no-host": "主机地址或端口未设定",
"connect-timeout": "连接超时",
"connect-fail": "连接失败"
}
@ -476,15 +487,15 @@
"output": "输出",
"group": "组",
"interface": "本地IP",
"interfaceprompt": "(可选)本地 IP 绑定到",
"interfaceprompt": "(可选)本地 IP 绑定到",
"send": "发送一个",
"toport": "到端口",
"address": "地址",
"decode-base64": "是否解码编码为Base64的信息?"
"decode-base64": "是否解码Base64编码的信息?"
},
"placeholder": {
"interface": "(可选eth0 的 ip 地址",
"address": "目的地 ip 地址"
"interface": "(可选eth0的IP地址",
"address": "目标IP地址"
},
"udpmsgs": "udp信息",
"mcmsgs": "组播信息",
@ -492,7 +503,7 @@
"bcmsg": "广播信息",
"mcmsg": "组播信息",
"output": {
"buffer": "缓冲模块",
"buffer": "Buffer",
"string": "字符串",
"base64": "Base64编码字符串"
},
@ -504,7 +515,7 @@
"tip": {
"in": "提示:确保您的防火墙将允许数据进入",
"out": "提示:如果要使用<code>msg.ip</code>和<code>msg.port</code>设置,请将地址和端口留空",
"port": "端口已在使用: "
"port": "正在使用端口: "
},
"status": {
"listener-at": "udp 监听器正在监听 __host__:__port__",
@ -520,66 +531,72 @@
"access-error": "UDP 访问错误, 你可能需要root权限才能接入1024以下的端口",
"error": "错误: __error__",
"bad-mcaddress": "无效的组播地址",
"interface": "必须是需要接口的 ip 地址",
"ip-notset": "udp: ip 地址未设定",
"interface": "必须是指定接口的IP地址",
"ip-notset": "udp: IP地址未设定",
"port-notset": "udp: 端口未设定",
"port-invalid": "udp: 无效端口号码",
"alreadyused": "udp: 端口已经在使用"
"alreadyused": "udp: 端口已被占用"
}
},
"switch": {
"label": {
"property": "属性",
"rule": "规矩"
"rule": "规则",
"repair" : "重建信息队列"
},
"and": "",
"and": "",
"checkall": "全选所有规则",
"stopfirst": "接受第一条匹配信息后停止",
"ignorecase": "忽大小写",
"ignorecase": "忽大小写",
"rules": {
"btwn":"在之间",
"cont":"包含",
"regex":"匹配正则表达式",
"true":"为真",
"false":"为假",
"null":"为空值",
"nnull":"非空值",
"null":"为空",
"nnull":"非空",
"head":"head",
"tail":"tail",
"index":"index between",
"exp":"JSONata表达式",
"else":"除此以外"
},
"errors": {
"invalid-expr": "无效 JSONata 表达: __error__"
"invalid-expr": "无效的JSONata表达式: __error__",
"too-many" : "Switch节点中有太多待定信息"
}
},
"change": {
"label": {
"rules": "规",
"rule": "规",
"rules": "规",
"rule": "规",
"set": "设定 __property__",
"change": " __property__",
"change": "改 __property__",
"delete": "删除 __property__",
"move": "移动 __property__",
"changeCount": ": __count__ 条规矩",
"regex": "用正则表达式"
"changeCount": "改: __count__条规矩",
"regex": "使用正则表达式"
},
"action": {
"set": "设定",
"change": "改",
"change": "改",
"delete": "删除",
"move": "转移",
"to": "到",
"search": "搜索",
"replace": "更改为"
"replace": "替代为"
},
"errors": {
"invalid-from": "无效来源 from 属性: __error__",
"invalid-json": "无效 to 属性",
"invalid-expr": "无效 JSONata 表示: __error__"
"invalid-from": "无效的'from'属性: __error__",
"invalid-json": "无效的'to'JSON 属性",
"invalid-expr": "无效的JSONata表达式: __error__"
}
},
"range": {
"label": {
"action": "行为作用",
"inputrange": "映射输入数据范围",
"action": "操作",
"inputrange": "映射输入数据",
"resultrange": "至目标范围",
"from": "从",
"to": "到",
@ -597,20 +614,22 @@
},
"tip": "提示: 此节点仅对数字有效",
"errors": {
"notnumber": "不是一个数"
"notnumber": "不是一个数"
}
},
"csv": {
"label": {
"columns": "列",
"separator": "分隔符",
"c2o": "CSV 至对象选项",
"o2c": "对象至 to CSV 选项",
"separator": "分隔符",
"c2o": "CSV至对象",
"o2c": "对象至CSV",
"input": "输入",
"skip-s": "忽略前",
"skip-e": "行",
"firstrow": "第一行包含列名",
"output": "输出",
"includerow": "包含列名行",
"newline": "新的一行"
"newline": "换行符"
},
"placeholder": {
"columns": "用逗号分割列名"
@ -625,8 +644,8 @@
"other": "其他..."
},
"output": {
"row": "每行包含一条信息",
"array": "一条单独信息 [数组]"
"row": "每行一条信息",
"array": "一条信息 [数组]"
},
"newline": {
"linux": "Linux (\\n)",
@ -634,7 +653,7 @@
"windows": "Windows (\\r\\n)"
},
"errors": {
"csv_js": "此节点仅处理 CSV 字符串或 js 对象",
"csv_js": "此节点仅处理CSV字符串或JS对象",
"obj_csv": "对象->CSV转换未设定列模版"
}
},
@ -646,11 +665,11 @@
"output": {
"html": "选定元素的html内容",
"text": "选定元素的纯文本内容",
"attr": "选定元素的所有属性对象"
"attr": "包含选定元素的所有属性对象"
},
"format": {
"single": "由一个单独信息包含一个数组",
"multi": "多条信息,每包含一个元素"
"single": "一条信息 [数组]",
"multi": "多条信息,每条一个元素"
}
},
"json": {
@ -660,8 +679,15 @@
"dropped-error": "转换有效负载失败"
},
"label": {
"o2j": "对象至 JSON 选项",
"pretty": "格式化 JSON 字符串"
"o2j": "对象至JSON",
"pretty": "格式化JSON字符串",
"action": "操作",
"property": "属性",
"actions": {
"toggle": "JSON字符串与对象互转",
"str":"总是转为JSON字符串",
"obj":"总是转为JS对象"
}
}
},
"yaml": {
@ -687,7 +713,7 @@
"gpiopin": "GPIO",
"selectpin": "选择引脚",
"resistor": "电阻?",
"readinitial": "在部署/重时读取引脚的初始状态?",
"readinitial": "在部署/重启时读取引脚的初始状态?",
"type": "类型",
"initpin": "初始化引脚状态?",
"debounce": "去抖动",
@ -714,10 +740,10 @@
"middle": "中",
"any": "任何",
"pinname": "引脚",
"alreadyuse": "已经在用",
"alreadyset": "已经设定为",
"alreadyuse": "已被使用",
"alreadyset": "已被设为",
"tip": {
"pin": "<b>引脚在使用</b>: ",
"pin": "<b>正在使用引脚</b>: ",
"in": "提示: 仅接受数字输入 - 输出必须为0或1.",
"dig": "提示: 如用数字输出 - 输入必须为0或1.",
"pwm": "提示: 如用PWM输出 - 输入必须为0至100之间; 如用高频率可能会比预期占用更多CPU资源.",
@ -740,27 +766,27 @@
"ignorenode": "忽略树莓派的特定节点",
"version": "版本命令失败",
"sawpitype": "查看Pi类型",
"libnotfound": "找不到树莓派 RPi.GPIO python库",
"libnotfound": "找不到树莓派RPi.GPIO的python库",
"alreadyset": "GPIO引脚 __pin__ 已经被设定为类型: __type__",
"invalidpin": "无效GPIO引脚",
"invalidinput": "无效输入",
"needtobeexecutable": "__command__ 需要为可运行命令",
"mustbeexecutable": "nrgpio 需要为可运行",
"needtobeexecutable": "__command__为可运行命令",
"mustbeexecutable": "nrgpio为可运行",
"commandnotfound": "nrgpio命令不存在",
"commandnotexecutable": "nrgpio 命令无法运行",
"commandnotexecutable": "nrgpio命令不可运行",
"error": "错误: __error__",
"pythoncommandnotfound": "nrpgio python 命令不运行"
"pythoncommandnotfound": "nrpgio python命令未处于运行状态"
}
},
"tail": {
"label": {
"filename": "文件名",
"type": "文件类型",
"splitlines": "拆分线 \\n?"
"splitlines": "以\\n来拆分行?"
},
"action": {
"text": "文本 - 返回字符串",
"binary": "二进制 - 返回缓冲区"
"binary": "二进制 - 返回Buffer"
},
"errors": {
"windowsnotsupport": "Windows目前不支持."
@ -781,14 +807,14 @@
},
"action": {
"append": "追加至文件",
"overwrite": "写文件",
"overwrite": "写文件",
"delete": "删除文件"
},
"output": {
"utf8": "一条单独 utf8 字符串",
"buffer": "一条单独缓冲区对象",
"utf8": "一个utf8字符串",
"buffer": "一个Buffer对象",
"lines": "每行一条信息",
"stream": "缓冲区流"
"stream": "一个Buffer流"
},
"status": {
"wrotefile": "写入至文件: __file__",
@ -806,41 +832,99 @@
"tip": "提示: 文件名应该是绝对路径否则它将相对于Node-RED进程的工作目录。"
},
"split": {
"intro":"<code>msg.payload</code> 基于类型:",
"intro":"基于以下类型拆分<code>msg.payload</code>:",
"object":"<b>对象</b>",
"objectSend":"发送每个键/值对的消息",
"strBuff":"<b>字符串</b> / <b>缓冲区</b>",
"objectSend":"每个键值对作为单个消息发送",
"strBuff":"<b>字符串</b> / <b>Buffer</b>",
"array":"<b>数组</b>",
"splitUsing":"拆分使用",
"splitLength":"固定长度",
"stream":"处理为消息流",
"stream":"作为消息流处理",
"addname":" 复制键到 "
},
"join":{
"mode":{
"mode":"模式",
"auto":"自动",
"merge":"合并序列",
"reduce":"缩减序列",
"custom":"手动"
},
"combine":"合每个",
"create":"创建输出",
"combine":"每个",
"create":"输出",
"type":{
"string":"字符串",
"array":"数组",
"buffer":"缓冲区",
"object":"键/值对象",
"buffer":"Buffer",
"object":"键对象",
"merged":"合并对象"
},
"using":"使用值",
"key":"作键",
"using":"使用值",
"key":"键",
"joinedUsing":"合并符号",
"send":"发送信息:",
"afterCount":"当达到一定数目的信息部件时",
"count":"数",
"afterCount":"达到一定数量的信息时",
"count":"数",
"subsequent":"和每个后续的消息",
"afterTimeout":"第一条消息的超时后",
"afterTimeout":"第一条消息的若干时间后",
"seconds":"秒",
"complete":"在使用<code> msg.complete </ code>属性设置的消息后",
"tip":"此模式假定此节点与 <i>split</i> 或者接收到的消息将具有正确配置的 <code>msg.parts</code> 属性."
"complete":"在收到存在<code>msg.complete</code>的消息后",
"tip":"此模式假定此节点与<i>split</i>相连, 或者接收到的消息有正确配置的<code>msg.parts</code>属性.",
"too-many" : "join节点中有太多待定信息",
"merge": {
"topics-label":"合并主题",
"topics":"主题",
"topic" : "主题",
"on-change":"当收到一个新主题时发送已合并信息"
},
"reduce": {
"exp": "Reduce表达式",
"exp-value": "exp",
"init": "初始值",
"right": "反向求值(从后往前)",
"fixup": "Fix-up exp"
},
"errors": {
"invalid-expr": "无效的JSONata表达式: __error__"
}
},
"sort" : {
"target" : "排序属性",
"seq" : "信息队列",
"key" : "键值",
"elem" : "元素值",
"order" : "顺序",
"ascending" : "升序",
"descending" : "降序",
"as-number" : "作为数值",
"invalid-exp" : "sort节点中存在无效的JSONata表达式",
"too-many" : "sort节点中有太多待定信息",
"clear" : "清空sort节点中的待定信息"
},
"batch" : {
"mode": {
"label" : "模式",
"num-msgs" : "按指定数量分组",
"interval" : "按时间间隔分组",
"concat" : "按主题分组"
},
"count": {
"label" : "分组数量",
"overlap" : "队末队首重叠数量",
"count" : "数量",
"invalid" : "无效的分组数量或重叠数量"
},
"interval": {
"label" : "时间间隔",
"seconds" : "秒",
"empty" : "无数据到达时发送空信息"
},
"concat": {
"topics-label": "主题",
"topic" : "主题"
},
"too-many" : "batch节点中有太多待定信息",
"unexpected" : "未知模式",
"no-parts" : "信息中没有parts属性"
}
}

View File

@ -239,7 +239,7 @@
"managePalette": "管理面板"
},
"library": {
"openLibrary": "打开库...",
"openLibrary": "打开库...",
"saveToLibrary": "保存到库...",
"typeLibrary": "__type__类型库",
"unnamedType": "无名__type__",