/** * Copyright JS Foundation and other contributors, http://js.foundation * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. **/ // The `https` setting requires the `fs` module. Uncomment the following // to make it available: //var fs = require("fs"); module.exports = { // the tcp port that the Node-RED web server is listening on uiPort: process.env.PORT || 1880, // By default, the Node-RED UI accepts connections on all IPv4 interfaces. // To listen on all IPv6 addresses, set uiHost to "::", // The following property can be used to listen on a specific interface. For // example, the following would only allow connections from the local machine. //uiHost: "127.0.0.1", // Retry time in milliseconds for MQTT connections mqttReconnectTime: 15000, // Retry time in milliseconds for Serial port connections serialReconnectTime: 15000, // Retry time in milliseconds for TCP socket connections //socketReconnectTime: 10000, // Timeout in milliseconds for TCP server socket connections // defaults to no timeout //socketTimeout: 120000, // Maximum number of messages to wait in queue while attempting to connect to TCP socket // defaults to 1000 //tcpMsgQueueSize: 2000, // Timeout in milliseconds for HTTP request connections // defaults to 120 seconds //httpRequestTimeout: 120000, // The maximum length, in characters, of any message sent to the debug sidebar tab debugMaxLength: 1000, // The maximum number of messages nodes will buffer internally as part of their // operation. This applies across a range of nodes that operate on message sequences. // defaults to no limit. A value of 0 also means no limit is applied. //nodeMaxMessageBufferLength: 0, // To disable the option for using local files for storing keys and certificates in the TLS configuration // node, set this to true //tlsConfigDisableLocalFiles: true, // Colourise the console output of the debug node //debugUseColors: true, // The file containing the flows. If not set, it defaults to flows_.json //flowFile: 'flows.json', // To enabled pretty-printing of the flow within the flow file, set the following // property to true: //flowFilePretty: true, // By default, credentials are encrypted in storage using a generated key. To // specify your own secret, set the following property. // If you want to disable encryption of credentials, set this property to false. // Note: once you set this property, do not change it - doing so will prevent // node-red from being able to decrypt your existing credentials and they will be // lost. //credentialSecret: "a-secret-key", // By default, all user data is stored in the Node-RED install directory. To // use a different location, the following property can be used //userDir: '/home/nol/.node-red/', // Node-RED scans the `nodes` directory in the install directory to find nodes. // The following property can be used to specify an additional directory to scan. //nodesDir: '/home/nol/.node-red/nodes', // By default, the Node-RED UI is available at http://localhost:1880/ // The following property can be used to specify a different root path. // If set to false, this is disabled. //httpAdminRoot: '/admin', // Some nodes, such as HTTP In, can be used to listen for incoming http requests. // By default, these are served relative to '/'. The following property // can be used to specifiy a different root path. If set to false, this is // disabled. //httpNodeRoot: '/red-nodes', // The following property can be used in place of 'httpAdminRoot' and 'httpNodeRoot', // to apply the same root to both parts. //httpRoot: '/red', // When httpAdminRoot is used to move the UI to a different root path, the // following property can be used to identify a directory of static content // that should be served at http://localhost:1880/. //httpStatic: '/home/nol/node-red-static/', // The maximum size of HTTP request that will be accepted by the runtime api. // Default: 5mb //apiMaxLength: '5mb', // If you installed the optional node-red-dashboard you can set it's path // relative to httpRoot //ui: { path: "ui" }, // Securing Node-RED // ----------------- // To password protect the Node-RED editor and admin API, the following // property can be used. See http://nodered.org/docs/security.html for details. //adminAuth: { // type: "credentials", // users: [{ // username: "admin", // password: "$2a$08$zZWtXTja0fB1pzD4sHCMyOCMYz2Z6dNbM6tl8sJogENOMcxWV9DN.", // permissions: "*" // }] //}, // To password protect the node-defined HTTP endpoints (httpNodeRoot), or // the static content (httpStatic), the following properties can be used. // The pass field is a bcrypt hash of the password. // See http://nodered.org/docs/security.html#generating-the-password-hash //httpNodeAuth: {user:"user",pass:"$2a$08$zZWtXTja0fB1pzD4sHCMyOCMYz2Z6dNbM6tl8sJogENOMcxWV9DN."}, //httpStaticAuth: {user:"user",pass:"$2a$08$zZWtXTja0fB1pzD4sHCMyOCMYz2Z6dNbM6tl8sJogENOMcxWV9DN."}, // The following property can be used to enable HTTPS // See http://nodejs.org/api/https.html#https_https_createserver_options_requestlistener // for details on its contents. // See the comment at the top of this file on how to load the `fs` module used by // this setting. // //https: { // key: fs.readFileSync('privatekey.pem'), // cert: fs.readFileSync('certificate.pem') //}, // The following property can be used to cause insecure HTTP connections to // be redirected to HTTPS. //requireHttps: true // The following property can be used to disable the editor. The admin API // is not affected by this option. To disable both the editor and the admin // API, use either the httpRoot or httpAdminRoot properties //disableEditor: false, // The following property can be used to configure cross-origin resource sharing // in the HTTP nodes. // See https://github.com/troygoode/node-cors#configuration-options for // details on its contents. The following is a basic permissive set of options: //httpNodeCors: { // origin: "*", // methods: "GET,PUT,POST,DELETE" //}, // If you need to set an http proxy please set an environment variable // called http_proxy (or HTTP_PROXY) outside of Node-RED in the operating system. // For example - http_proxy=http://myproxy.com:8080 // (Setting it here will have no effect) // You may also specify no_proxy (or NO_PROXY) to supply a comma separated // list of domains to not proxy, eg - no_proxy=.acme.co,.acme.co.uk // The following property can be used to add a custom middleware function // in front of all http in nodes. This allows custom authentication to be // applied to all http in nodes, or any other sort of common request processing. //httpNodeMiddleware: function(req,res,next) { // // Handle/reject the request, or pass it on to the http in node by calling next(); // // Optionally skip our rawBodyParser by setting this to true; // //req.skipRawBodyParser = true; // next(); //}, // The following property can be used to verify websocket connection attempts. // This allows, for example, the HTTP request headers to be checked to ensure // they include valid authentication information. //webSocketNodeVerifyClient: function(info) { // // 'info' has three properties: // // - origin : the value in the Origin header // // - req : the HTTP request // // - secure : true if req.connection.authorized or req.connection.encrypted is set // // // // The function should return true if the connection should be accepted, false otherwise. // // // // Alternatively, if this function is defined to accept a second argument, callback, // // it can be used to verify the client asynchronously. // // The callback takes three arguments: // // - result : boolean, whether to accept the connection or not // // - code : if result is false, the HTTP error status to return // // - reason: if result is false, the HTTP reason string to return //}, // Anything in this hash is globally available to all functions. // It is accessed as context.global. // eg: // functionGlobalContext: { os:require('os') } // can be accessed in a function block as: // context.global.os functionGlobalContext: { // os:require('os'), // jfive:require("johnny-five"), // j5board:require("johnny-five").Board({repl:false}) }, // Context Storage // The following property can be used to enable context storage. The configuration // provided here will enable file-based context that flushes to disk every 30 seconds. // Refer to the documentation for further options: https://nodered.org/docs/api/context/ // //contextStorage: { // default: { // module:"localfilesystem" // }, //}, // The following property can be used to order the categories in the editor // palette. If a node's category is not in the list, the category will get // added to the end of the palette. // If not set, the following default order is used: //paletteCategories: ['subflows', 'input', 'output', 'function', 'social', 'mobile', 'storage', 'analysis', 'advanced'], // Configure the logging output logging: { // Only console logging is currently supported console: { // Level of logging to be recorded. Options are: // fatal - only those errors which make the application unusable should be recorded // error - record errors which are deemed fatal for a particular request + fatal errors // warn - record problems which are non fatal + errors + fatal errors // info - record information about the general running of the application + warn + error + fatal errors // debug - record information which is more verbose than info + info + warn + error + fatal errors // trace - record very detailed logging + debug + info + warn + error + fatal errors // off - turn off all logging (doesn't affect metrics or audit) level: "info", // Whether or not to include metric events in the log output metrics: false, // Whether or not to include audit events in the log output audit: false } }, // Customising the editor editorTheme: { projects: { // To enable the Projects feature, set this value to true enabled: false } }, }