1
0
mirror of https://github.com/node-red/node-red.git synced 2023-10-10 13:36:53 +02:00
node-red/packages/node_modules/@node-red/nodes/locales/zh-CN/messages.json
2021-05-04 11:19:05 +01:00

958 lines
33 KiB
JSON
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

{
"common": {
"label": {
"payload": "内容",
"topic": "主题",
"name": "名称",
"username": "用户名",
"password": "密码",
"property": "属性",
"selectNodes": "选择节点...",
"expand": "扩展"
},
"status": {
"connected": "已连接",
"not-connected": "未连接",
"disconnected": "已断开",
"connecting": "连接中",
"error": "错误",
"ok": "确定"
},
"notification": {
"error": "<strong>错误</strong>: __message__",
"errors": {
"not-deployed": "节点未部署",
"no-response": "服务器无反应",
"unexpected": "发生意外错误 (__status__) __message__"
}
},
"errors": {
"nooverride": "警告: 信息的属性已经不可以改写节点的属性. 详情参考 bit.ly/nr-override-msg-props"
}
},
"inject": {
"inject": "注入",
"repeat": "重复 = __repeat__",
"crontab": "crontab = __crontab__",
"stopped": "停止",
"failed": "注入失败: __error__",
"label": {
"properties": "属性",
"repeat": "重复",
"flow": "流上下午",
"global": "全局上下文",
"str": "字符串",
"num": "数值",
"bool": "布尔值",
"json": "JSON对象",
"bin": "buffer",
"date": "时间戳",
"env": "环境变量",
"object": "对象",
"string": "字符串",
"boolean": "布尔值",
"number": "数值",
"Array": "数组",
"invalid": "无效的JSON对象"
},
"timestamp": "时间戳",
"none": "无",
"interval": "周期性执行",
"interval-time": "指定时间段周期性执行",
"time": "指定时间",
"seconds": "秒",
"minutes": "分钟",
"hours": "小时",
"between": "介于",
"previous": "之前数值",
"at": "在",
"and": "至",
"every": "每隔",
"days": [
"星期一",
"星期二",
"星期三",
"星期四",
"星期五",
"星期六",
"星期天"
],
"on": "在",
"onstart": "立刻执行于",
"onceDelay": "秒后, 此后",
"success": "成功注入: __label__",
"errors": {
"failed": "注入失败, 请查看日志",
"toolong": "周期过长",
"invalid-expr": "无效的JSONata表达式 __error__"
},
"tip": "<b>注意:</b> \"指定时间段周期性执行\" 和 \"指定时间\" 会使用cron系统.<br/> 详情查看信息页."
},
"catch": {
"catch": "捕获:所有节点",
"catchNodes": "捕获__number__ 个节点",
"catchUncaught": "捕获:未捕获",
"label": {
"source": "捕获范围",
"selectAll": "全选",
"uncaught": "忽略其他捕获节点处理的错误"
},
"scope": {
"all": "所有节点",
"selected": "指定节点"
}
},
"status": {
"status": "报告所有节点状态",
"statusNodes": "报告 __number__ 个节点状态",
"label": {
"source": "报告状态范围",
"sortByType": "按类型排序"
},
"scope": {
"all": "所有节点",
"selected": "指定节点"
}
},
"complete": {
"completeNodes": "完成: __number__ 个节点"
},
"debug": {
"output": "输出",
"status": "状态",
"none": "None",
"invalid-exp": "无效的JSONata表达式: __error__",
"msgprop": "信息属性",
"msgobj": "与调试输出相同",
"autostatus": "自动的",
"to": "目标",
"debtab": "调试窗口",
"tabcon": "调试窗口及控制台",
"toSidebar": "调试窗口",
"toConsole": "控制台",
"toStatus": "节点状态 (32位字符)",
"severity": "级别",
"notification": {
"activated": "成功激活: __label__",
"deactivated": "成功取消: __label__"
},
"sidebar": {
"label": "调试窗口",
"name": "名称",
"filterAll": "所有节点",
"filterSelected": "已选节点",
"filterCurrent": "当前流程",
"debugNodes": "调试节点",
"clearLog": "清空日志",
"filterLog": "过滤日志",
"openWindow": "在新窗口打开",
"copyPath": "复制路径",
"copyPayload": "复制值",
"pinPath": "固定展开"
},
"messageMenu": {
"collapseAll": "折叠所有路径",
"clearPinned": "清空已固定路径",
"filterNode": "过滤此节点",
"clearFilter": "清空过滤条件"
}
},
"link": {
"linkIn": "输入",
"linkOut": "输出"
},
"tls": {
"tls": "TLS设置",
"label": {
"use-local-files": "使用本地密匙及证书文件",
"upload": "上传",
"cert": "证书",
"key": "私钥",
"passphrase": "密码",
"ca": "CA证书",
"verify-server-cert": "验证服务器证书",
"servername": "服务器名"
},
"placeholder": {
"cert": "证书路径 (PEM 格式)",
"key": "私钥路径 (PEM 格式)",
"ca": "CA证书路径 (PEM 格式)",
"passphrase": "私钥密码 (可选)",
"servername": "用于SNI"
},
"error": {
"missing-file": "未提供证书/密钥文件"
}
},
"exec": {
"exec": "执行",
"spawn": "spawn",
"label": {
"command": "命令",
"append": "追加",
"timeout": "超时",
"timeoutplace": "可选填",
"return": "输出",
"seconds": "秒",
"stdout": "标准输出",
"stderr": "标准错误输出",
"retcode": "返回码"
},
"placeholder": {
"extraparams": "额外的输入参数"
},
"opt": {
"exec": "当命令完成时 - exec模式",
"spawn": "当命令进行时 - spawn模式"
},
"oldrc": "使用旧式输出 (兼容模式)"
},
"function": {
"function": "函数",
"label": {
"function": "函数",
"initialize": "设置",
"finalize": "关闭",
"outputs": "输出"
},
"text": {
"initialize": "// 部署节点后,此处添加的代码将运行一次。 \n",
"finalize": "// 节点正在停止或重新部署时,将运行此处添加的代码。 \n"
},
"error": {
"inputListener": "无法在函数中监听对'注入'事件",
"non-message-returned": "函数节点尝试返回类型为 __type__ 的信息"
}
},
"template": {
"template": "模板",
"label": {
"template": "模版",
"property": "属性",
"format": "语法高亮",
"syntax": "格式",
"output": "输出为",
"mustache": "Mustache 模版",
"plain": "纯文本",
"json": "JSON",
"yaml": "YAML",
"none": "无"
},
"templatevalue": "这是有效载荷: {{payload}} !"
},
"delay": {
"action": "行为设置",
"for": "时长",
"delaymsg": "延迟每一条信息",
"delayfixed": "固定延迟时间",
"delayvarmsg": "允许msg.delay复写延迟时长",
"randomdelay": "随机延迟",
"limitrate": "限制信息速率",
"limitall": "所有信息",
"limittopic": "每一个msg.topic",
"fairqueue": "依次发送每一个topic",
"timedqueue": "发所有topic",
"milisecs": "毫秒",
"secs": "秒",
"sec": "秒",
"mins": "分",
"min": "分",
"hours": "小时",
"hour": "小时",
"days": "天",
"day": "天",
"between": "介于",
"and": "至",
"rate": "速度",
"msgper": "信息 每",
"dropmsg": "不传输中间信息",
"label": {
"delay": "延迟",
"variable": "变量",
"limit": "限制",
"limitTopic": "限制主题",
"random": "随机",
"units": {
"second": {
"plural": "秒",
"singular": "秒"
},
"minute": {
"plural": "分钟",
"singular": "分钟"
},
"hour": {
"plural": "小时",
"singular": "小时"
},
"day": {
"plural": "天",
"singular": "天"
}
}
}
},
"trigger": {
"send": "发送",
"then": "然后",
"then-send": "然后发送",
"output": {
"string": "字符串",
"number": "数字",
"existing": "现有信息对象",
"original": "原本信息对象",
"latest": "最新信息对象",
"nothing": "无"
},
"wait-reset": "等待被重置",
"wait-for": "等待",
"wait-loop": "周期性重发",
"for": "处理",
"bytopics": "每个msg.topic",
"alltopics": "所有消息",
"duration": {
"ms": "毫秒",
"s": "秒",
"m": "分钟",
"h": "小时"
},
"extend": " 如有新信息,延长延迟",
"override": "使用msg.delay覆盖延迟时间",
"second": " 发送第二条消息到单独的输出",
"label": {
"trigger": "触发",
"trigger-block": "触发并阻止",
"trigger-loop": "周期性重发",
"reset": "重置触发节点条件 如果:",
"resetMessage": "msg.reset已设置",
"resetPayload": "msg.payload等于",
"resetprompt": "可选填"
}
},
"comment": {
"comment": "注释"
},
"unknown": {
"label": {
"unknown": "未知"
},
"tip": "<p>此节点是您安装但Node-RED所不知道的类型。</p><p><i>如果在此状态下部署节点,那么它的配置将被保留,但是流程将不会启动,直到安装缺少的类型。</i></p><p>有关更多帮助,请参阅信息侧栏</p>"
},
"mqtt": {
"label": {
"broker": "服务端",
"example": "比如:本地主机",
"output": "输出",
"qos": "QoS",
"retain": "保持",
"clientid": "客户端ID",
"port": "端口",
"keepalive": "Keepalive计时(秒)",
"cleansession": "使用新的会话",
"use-tls": "使用 TLS",
"tls-config": "TLS 设置",
"verify-server-cert": "验证服务器证书",
"compatmode": "使用旧式MQTT 3.1支持"
},
"sections-label": {
"birth-message": "连接时发送的消息(出生消息)",
"will-message": "意外断开连接时的发送消息Will消息",
"close-message": "断开连接前发送的消息(关闭消息)"
},
"tabs-label": {
"connection": "连接",
"security": "安全",
"messages": "消息"
},
"placeholder": {
"clientid": "留白则自动生成",
"clientid-nonclean": "如非新会话必须设置客户端ID",
"will-topic": "留白将禁止Will信息",
"birth-topic": "留白将禁止Birth信息",
"close-topic": "留白以禁用关闭消息"
},
"state": {
"connected": "已连接到服务端: __broker__",
"disconnected": "已断开与服务端 __broker__ 的链接",
"connect-failed": "与服务端 __broker__ 的连接失败"
},
"retain": "保留",
"output": {
"buffer": "Buffer",
"string": "字符串",
"base64": "Base64编码字符串",
"auto": "自动检测 (字符串或buffer)",
"json": "解析的JSON对象"
},
"true": "是",
"false": "否",
"tip": "提示: 若希望通过msg属性对topic(信息), qos及retain(保留)进行设置, 则将上述项留白",
"errors": {
"not-defined": "主题未设置",
"missing-config": "未设置服务端",
"invalid-topic": "主题无效",
"nonclean-missingclientid": "客户端ID未设定使用新会话",
"invalid-json-string": "无效的JSON字符串",
"invalid-json-parse": "无法解析JSON字符串"
}
},
"httpin": {
"label": {
"method": "请求方式",
"url": "URL",
"doc": "文档",
"return": "返回",
"upload": "接受文件上传?",
"status": "状态码",
"headers": "头",
"other": "其他",
"paytoqs": "将msg.payload附加为查询字符串参数",
"utf8String": "UTF8格式的字符串",
"binaryBuffer": "二进制buffer",
"jsonObject": "解析的JSON对象",
"authType": "类型",
"bearerToken": "Token"
},
"setby": "- 用 msg.method 设定 -",
"basicauth": "基本认证",
"use-tls": "使用安全连接 (SSL/TLS) ",
"tls-config": "TLS 设置",
"basic": "基本认证",
"digest": "摘要认证",
"bearer": "bearer认证",
"use-proxy": "使用代理服务器",
"persist": "对连接启用keep-alive",
"proxy-config": "代理服务器设置",
"use-proxyauth": "使用代理身份验证",
"noproxy-hosts": "代理例外",
"utf8": "UTF-8 字符串",
"binary": "二进制数据",
"json": "JSON对象",
"tip": {
"in": "相对URL",
"res": "发送到此节点的消息<b>必须</b>来自<i>http input</i>节点",
"req": "提示如果JSON解析失败则获取的字符串将按原样返回."
},
"httpreq": "http 请求",
"errors": {
"not-created": "当httpNodeRoot为否时无法创建http-in节点",
"missing-path": "无路径",
"no-response": "无响应对象",
"json-error": "JSON 解析错误",
"no-url": "未设定 URL",
"deprecated-call": "__method__ 方法已弃用",
"invalid-transport": "非HTTP传输请求",
"timeout-isnan": "超时值不是有效数字,忽略",
"timeout-isnegative": "超时值为负,忽略",
"invalid-payload": "无效的有效载荷"
},
"status": {
"requesting": "请求中"
}
},
"websocket": {
"label": {
"type": "类型",
"path": "路径",
"url": "URL"
},
"listenon": "监听",
"connectto": "连接",
"sendrec": "发送/接受",
"payload": "有效载荷",
"message": "完整信息",
"tip": {
"path1": "默认情况下,<code>payload</code>将包含要发送或从Websocket接收的数据。侦听器可以配置为以JSON格式的字符串发送或接收整个消息对象.",
"path2": "这条路径将相对于 <code>__path__</code>.",
"url1": "URL 应该使用ws:&#47;&#47;或者wss:&#47;&#47;方案并指向现有的websocket侦听器.",
"url2": "默认情况下,<code>payload</code> 将包含要发送或从Websocket接收的数据。可以将客户端配置为以JSON格式的字符串发送或接收整个消息对象."
},
"status": {
"connected": "连接数 __count__",
"connected_plural": "连接数 __count__"
},
"errors": {
"connect-error": "ws连接发生了错误: ",
"send-error": "发送时发生了错误: ",
"missing-conf": "未设置服务器",
"duplicate-path": "同一路径上不能有两个WebSocket侦听器: __path__"
}
},
"watch": {
"watch": "watch",
"label": {
"files": "文件",
"recursive": "递归所有子文件夹"
},
"placeholder": {
"files": "逗号分开文件或文件夹"
},
"tip": "在Windows上请务必使用双斜杠 \\\\ 来隔开文件夹名字"
},
"tcpin": {
"label": {
"type": "类型",
"output": "输出",
"port": "端口",
"host": "主机地址",
"payload": "有效载荷",
"delimited": "分隔符号",
"close-connection": "是否在成功发送每条信息后断开连接?",
"decode-base64": "用 Base64 解码信息?",
"server": "服务器",
"return": "返回",
"ms": "毫秒",
"chars": "字符"
},
"type": {
"listen": "监听",
"connect": "连接",
"reply": "响应 TCP"
},
"output": {
"stream": "字串流",
"single": "单一",
"buffer": "Buffer",
"string": "字符串",
"base64": "Base64 字符串"
},
"return": {
"timeout": "指定时间后",
"character": "当收到某个字符为",
"number": "指定字符数",
"never": "永不 - 保持连接",
"immed": "马上 - 不需要等待回复"
},
"status": {
"connecting": "正在连接到 __host__:__port__",
"connected": "已经连接到 __host__:__port__",
"listening-port": "监听端口 __port__",
"stopped-listening": "已停止监听端口",
"connection-from": "连接来自 __host__:__port__",
"connection-closed": "连接已关闭 __host__:__port__",
"connections": "__count__ 个连接",
"connections_plural": "__count__ 个连接"
},
"errors": {
"connection-lost": "连接中断 __host__:__port__",
"timeout": "超时关闭套接字连接,端口 __port__",
"cannot-listen": "无法监听端口 __port__, 错误: __error__",
"error": "错误: __error__",
"socket-error": "套接字连接错误来自 __host__:__port__",
"no-host": "主机地址或端口未设定",
"connect-timeout": "连接超时",
"connect-fail": "连接失败"
}
},
"udp": {
"label": {
"listen": "监听",
"onport": "端口",
"using": "使用",
"output": "输出",
"group": "组",
"interface": "本地IP",
"send": "发送一个",
"toport": "到端口",
"address": "地址",
"decode-base64": "是否解码Base64编码的信息?"
},
"placeholder": {
"interface": "可选eth0的IP地址",
"interfaceprompt": "(可选) 要绑定的本地接口或地址",
"address": "目标IP地址"
},
"udpmsgs": "udp信息",
"mcmsgs": "组播信息",
"udpmsg": "udp信息",
"bcmsg": "广播信息",
"mcmsg": "组播信息",
"output": {
"buffer": "Buffer",
"string": "字符串",
"base64": "Base64编码字符串"
},
"bind": {
"random": "绑定到任意本地端口",
"local": "绑定到本地端口",
"target": "绑定到目标端口"
},
"tip": {
"in": "提示:确保您的防火墙将允许数据进入",
"out": "提示:如果要使用<code>msg.ip</code>和<code>msg.port</code>设置,请将地址和端口留空",
"port": "正在使用端口: "
},
"status": {
"listener-at": "udp 监听器正在监听 __host__:__port__",
"mc-group": "udp 组播到 __group__",
"listener-stopped": "udp 监听器已停止",
"output-stopped": "udp 输出已停止",
"mc-ready": "udp 组播已准备好: __outport__ -> __host__:__port__",
"bc-ready": "udp 广播已准备好: __outport__ -> __host__:__port__",
"ready": "udp 已准备好: __outport__ -> __host__:__port__",
"ready-nolocal": "udp 已准备好: __host__:__port__",
"re-use": "udp 重用套接字: __outport__ -> __host__:__port__"
},
"errors": {
"access-error": "UDP 访问错误, 你可能需要root权限才能接入1024以下的端口",
"error": "错误: __error__",
"bad-mcaddress": "无效的组播地址",
"interface": "必须是指定接口的IP地址",
"ip-notset": "udp: IP地址未设定",
"port-notset": "udp: 端口未设定",
"port-invalid": "udp: 无效端口号码",
"alreadyused": "udp: 端口已被占用",
"ifnotfound": "udp: 接口 __iface__ 未发现"
}
},
"switch": {
"switch": "switch",
"label": {
"property": "属性",
"rule": "规则",
"repair": "重建信息队列"
},
"previous": "先前值",
"and": "与",
"checkall": "全选所有规则",
"stopfirst": "接受第一条匹配信息后停止",
"ignorecase": "忽略大小写",
"rules": {
"btwn": "在之间",
"cont": "包含",
"regex": "匹配正则表达式",
"true": "为真",
"false": "为假",
"null": "为空",
"nnull": "非空",
"istype": "类型是",
"empty": "为空",
"nempty": "非空",
"head": "头",
"tail": "尾",
"index": "索引在..中间",
"exp": "JSONata表达式",
"else": "除此以外",
"hask": "拥有键"
},
"errors": {
"invalid-expr": "无效的JSONata表达式: __error__",
"too-many": "Switch节点中有太多待定信息"
}
},
"change": {
"label": {
"rules": "规则",
"rule": "规则",
"set": "设定 __property__",
"change": "修改 __property__",
"delete": "删除 __property__",
"move": "移动 __property__",
"changeCount": "修改: __count__ 条规矩",
"regex": "使用正则表达式"
},
"action": {
"set": "设定",
"change": "修改",
"delete": "删除",
"move": "转移",
"to": "到",
"search": "搜索",
"replace": "替代为"
},
"errors": {
"invalid-from": "无效的'from'属性: __error__",
"invalid-json": "无效的'to'JSON 属性",
"invalid-expr": "无效的JSONata表达式: __error__",
"no-override": "无法设置非对象类型的属性: __property__"
}
},
"range": {
"range": "range",
"label": {
"action": "操作",
"inputrange": "映射输入数据",
"resultrange": "至目标范围",
"from": "从",
"to": "到",
"roundresult": "取最接近整数?"
},
"placeholder": {
"min": "比如: 0",
"maxin": "比如: 99",
"maxout": "比如: 255"
},
"scale": {
"payload": "按比例msg.payload",
"limit": "按比例并设定界限至目标范围",
"wrap": "按比例并包含在目标范围内"
},
"tip": "提示: 此节点仅对数字有效",
"errors": {
"notnumber": "不是一个数字"
}
},
"csv": {
"label": {
"columns": "列",
"separator": "分隔符",
"c2o": "CSV至对象",
"o2c": "对象至CSV",
"input": "输入",
"skip-s": "忽略前",
"skip-e": "行",
"firstrow": "第一行包含列名",
"output": "输出",
"includerow": "包含列名行",
"newline": "换行符",
"usestrings": "解析数值",
"include_empty_strings": "包含空字符串",
"include_null_values": "包含空值"
},
"placeholder": {
"columns": "用逗号分割列名"
},
"separator": {
"comma": "逗号",
"tab": "Tab",
"space": "空格",
"semicolon": "分号",
"colon": "冒号",
"hashtag": "井号",
"other": "其他..."
},
"output": {
"row": "每行一条信息",
"array": "仅一条信息 [数组]"
},
"newline": {
"linux": "Linux (\\n)",
"mac": "Mac (\\r)",
"windows": "Windows (\\r\\n)"
},
"hdrout": {
"none": "从不发送列标题",
"all": "总是发送列标题",
"once": "发送头一次,直到 msg.reset"
},
"errors": {
"csv_js": "此节点仅处理CSV字符串或JS对象",
"obj_csv": "对象->CSV转换未设定列模版",
"bad_csv": "CSV数据格式错误-输出可能已损坏。"
}
},
"html": {
"label": {
"select": "选取项",
"output": "输出",
"in": "in"
},
"output": {
"html": "选定元素的html内容",
"text": "选定元素的纯文本内容",
"attr": "包含选定元素的所有属性的对象"
},
"format": {
"single": "一条信息 [数组]",
"multi": "多条信息,每条一个元素"
}
},
"json": {
"errors": {
"dropped-object": "忽略非对象格式的有效负载",
"dropped": "忽略不支持格式的有效负载类型",
"dropped-error": "转换有效负载失败",
"schema-error": "JSON架构错误",
"schema-error-compile": "JSON架构错误: 未能编译架构"
},
"label": {
"o2j": "对象至JSON",
"pretty": "格式化JSON字符串",
"action": "操作",
"property": "属性",
"actions": {
"toggle": "JSON字符串与对象互转",
"str": "总是转为JSON字符串",
"obj": "总是转为JS对象"
}
}
},
"yaml": {
"errors": {
"dropped-object": "忽略非对象格式的有效负载",
"dropped": "忽略不支持格式的有效负载类型",
"dropped-error": "转换有效负载失败"
}
},
"xml": {
"label": {
"represent": "XML标签属性的属性名称",
"prefix": "标签文本内容的属性名称",
"advanced": "高级选项",
"x2o": "XML到对象选项"
},
"errors": {
"xml_js": "此节点仅处理XML字符串或JS对象."
}
},
"file": {
"label": {
"filename": "文件名",
"action": "行为",
"addnewline": "向每个有效载荷添加换行符(\\n?",
"createdir": "创建目录(如果不存在)?",
"outputas": "输出",
"breakchunks": "分拆成块",
"breaklines": "分拆成行",
"filelabel": "文件",
"sendError": "发生错误时发送消息(传统模式)",
"encoding": "编码",
"deletelabel": "删除 __file__",
"utf8String": "UTF8字符串",
"binaryBuffer": "二进制buffer"
},
"action": {
"append": "追加至文件",
"overwrite": "复写文件",
"delete": "删除文件"
},
"output": {
"utf8": "一个utf8字符串",
"buffer": "一个Buffer对象",
"lines": "每行一条信息",
"stream": "一个Buffer流"
},
"status": {
"wrotefile": "写入至文件: __file__",
"deletedfile": "删除文件: __file__",
"appendedfile": "追加至文件: __file__"
},
"encoding": {
"none": "默认",
"native": "Native",
"unicode": "Unicode",
"japanese": "日本",
"chinese": "中国",
"korean": "韩国",
"taiwan": "台湾/香港",
"windows": "Windows代码页",
"iso": "ISO代码页",
"ibm": "IBM代码页",
"mac": "Mac代码页",
"koi8": "KOI8代码页",
"misc": "其它"
},
"errors": {
"nofilename": "未指定文件名",
"invaliddelete": "警告:无效删除。请在配置对话框中使用特定的删除选项",
"deletefail": "无法删除文件: __error__",
"writefail": "无法写入文件: __error__",
"appendfail": "无法追加到文件: __error__",
"createfail": "文件创建失败: __error__"
},
"tip": "提示: 文件名应该是绝对路径否则它将相对于Node-RED进程的工作目录。"
},
"split": {
"split": "split",
"intro": "基于以下类型拆分<code>msg.payload</code>:",
"object": "<b>对象</b>",
"objectSend": "每个键值对作为单个消息发送",
"strBuff": "<b>字符串</b> / <b>Buffer</b>",
"array": "<b>数组</b>",
"splitUsing": "拆分使用",
"splitLength": "固定长度",
"stream": "作为消息流处理",
"addname": " 复制键到 "
},
"join": {
"join": "连接",
"mode": {
"mode": "模式",
"auto": "自动",
"merge": "合并序列",
"reduce": "缩减序列",
"custom": "手动"
},
"combine": "合并每个",
"completeMessage": "完整的消息",
"create": "输出为",
"type": {
"string": "字符串",
"array": "数组",
"buffer": "Buffer",
"object": "键值对对象",
"merged": "合并对象"
},
"using": "使用此值",
"key": "作为键",
"joinedUsing": "合并符号",
"send": "发送信息:",
"afterCount": "达到一定数量的信息时",
"count": "数量",
"subsequent": "和每个后续的消息",
"afterTimeout": "第一条消息的若干时间后",
"seconds": "秒",
"complete": "在收到存在<code>msg.complete</code>的消息后",
"tip": "此模式假定此节点与<i>split</i>相连, 或者接收到的消息有正确配置的<code>msg.parts</code>属性.",
"too-many": "join节点中有太多待定信息",
"merge": {
"topics-label": "合并主题",
"topics": "主题",
"topic": "主题",
"on-change": "当收到一个新主题时发送已合并信息"
},
"reduce": {
"exp": "Reduce表达式",
"exp-value": "exp",
"init": "初始值",
"right": "反向求值(从后往前)",
"fixup": "Fix-up exp"
},
"errors": {
"invalid-expr": "无效的JSONata表达式: __error__",
"invalid-type": "Cannot join __error__ to buffer"
}
},
"sort": {
"sort": "排序",
"target": "排序属性",
"seq": "信息队列",
"key": "键值",
"elem": "元素值",
"order": "顺序",
"ascending": "升序",
"descending": "降序",
"as-number": "作为数值",
"invalid-exp": "排序节点中存在无效的JSONata表达式",
"too-many": "排序节点中有太多待定信息",
"clear": "清空排序节点中的待定信息"
},
"batch": {
"batch": "batch",
"mode": {
"label": "模式",
"num-msgs": "按指定数量分组",
"interval": "按时间间隔分组",
"concat": "按主题分组"
},
"count": {
"label": "分组数量",
"overlap": "队末队首重叠数量",
"count": "数量",
"invalid": "无效的分组数量或重叠数量"
},
"interval": {
"label": "时间间隔",
"seconds": "秒",
"empty": "无数据到达时发送空信息"
},
"concat": {
"topics-label": "主题",
"topic": "主题"
},
"too-many": "batch节点中有太多待定信息",
"unexpected": "未知模式",
"no-parts": "信息中没有parts属性"
}
}