1
0
mirror of https://github.com/node-red/node-red.git synced 2023-10-10 13:36:53 +02:00
node-red/packages/node_modules/@node-red/nodes/locales/en-US/messages.json
Nick O'Leary 79f3669fac
Add 'catch uncaught only' mode to Catch node
Closes 

This was inspired by a PR from @mauriciom75 but implemented in a different way
due to some of the internal reworking done to Flow and Subflow in the dev branch
2019-02-05 14:29:50 +00:00

965 lines
34 KiB
JSON

{
"common": {
"label": {
"payload": "Payload",
"topic": "Topic",
"name": "Name",
"username": "Username",
"password": "Password",
"property": "Property"
},
"status": {
"connected": "connected",
"not-connected": "not connected",
"disconnected": "disconnected",
"connecting": "connecting",
"error": "error",
"ok": "OK"
},
"notification": {
"error": "<strong>Error</strong>: __message__",
"errors": {
"not-deployed": "node not deployed",
"no-response": "no response from server",
"unexpected": "unexpected error (__status__) __message__"
}
},
"errors": {
"nooverride": "Warning: msg properties can no longer override set node properties. See bit.ly/nr-override-msg-props"
}
},
"inject": {
"inject": "inject",
"repeat": "repeat = __repeat__",
"crontab": "crontab = __crontab__",
"stopped": "stopped",
"failed": "Inject failed: __error__",
"label": {
"repeat": "Repeat"
},
"timestamp": "timestamp",
"none": "none",
"interval": "interval",
"interval-time": "interval between times",
"time": "at a specific time",
"seconds": "seconds",
"minutes": "minutes",
"hours": "hours",
"between": "between",
"previous": "previous value",
"at": "at",
"and": "and",
"every": "every",
"days": [
"Monday",
"Tuesday",
"Wednesday",
"Thursday",
"Friday",
"Saturday",
"Sunday"
],
"on": "on",
"onstart": "Inject once after",
"onceDelay": "seconds, then",
"tip": "<b>Note:</b> \"interval between times\" and \"at a specific time\" will use cron.<br/>\"interval\" should be less than 596 hours.<br/>See info box for details.",
"success": "Successfully injected: __label__",
"errors": {
"failed": "inject failed, see log for details",
"toolong": "Interval too large"
}
},
"catch": {
"catch": "catch: all",
"catchNodes": "catch: __number__",
"catchUncaught": "catch: uncaught",
"label": {
"source": "Catch errors from",
"node": "node",
"type": "type",
"selectAll": "select all",
"sortByLabel": "sort by label",
"sortByType": "sort by type",
"uncaught": "Ignore errors handled by other Catch nodes"
},
"scope": {
"all": "all nodes",
"selected": "selected nodes"
}
},
"status": {
"status": "status: all",
"statusNodes": "status: __number__",
"label": {
"source": "Report status from",
"node": "node",
"type": "type",
"selectAll": "select all",
"sortByLabel": "sort by label",
"sortByType": "sort by type"
},
"scope": {
"all": "all nodes",
"selected": "selected nodes"
}
},
"debug": {
"output": "Output",
"none": "None",
"invalid-exp": "Invalid JSONata expression: __error__",
"msgprop": "message property",
"msgobj": "complete msg object",
"to": "To",
"debtab": "debug tab",
"tabcon": "debug tab and console",
"toSidebar": "debug window",
"toConsole": "system console",
"toStatus": "node status (32 characters)",
"severity": "Level",
"notification": {
"activated": "Successfully activated: __label__",
"deactivated": "Successfully deactivated: __label__"
},
"sidebar": {
"label": "debug",
"name": "Debug messages",
"filterAll": "all nodes",
"filterSelected": "selected nodes",
"filterCurrent": "current flow",
"debugNodes": "Debug nodes",
"clearLog": "Clear log",
"filterLog": "Filter log",
"openWindow": "Open in new window"
},
"messageMenu": {
"collapseAll": "Collapse all paths",
"clearPinned": "Clear pinned paths",
"filterNode": "Filter this node",
"clearFilter": "Clear filter"
}
},
"link": {
"linkIn": "link in",
"linkOut": "link out"
},
"tls": {
"tls": "TLS configuration",
"label": {
"use-local-files": "Use key and certificates from local files",
"upload": "Upload",
"cert": "Certificate",
"key": "Private Key",
"passphrase": "Passphrase",
"ca": "CA Certificate",
"verify-server-cert":"Verify server certificate",
"servername": "Server Name"
},
"placeholder": {
"cert":"path to certificate (PEM format)",
"key":"path to private key (PEM format)",
"ca":"path to CA certificate (PEM format)",
"passphrase":"private key passphrase (optional)",
"servername":"for use with SNI"
},
"error": {
"missing-file": "No certificate/key file provided"
}
},
"exec": {
"exec": "exec",
"spawn": "spawn",
"label": {
"command": "Command",
"append": "Append",
"timeout": "Timeout",
"timeoutplace": "optional",
"return": "Output",
"seconds": "seconds"
},
"placeholder": {
"extraparams": "extra input parameters"
},
"opt": {
"exec": "when the command is complete - exec mode",
"spawn": "while the command is running - spawn mode"
},
"oldrc": "Use old style output (compatibility mode)"
},
"function": {
"function": "",
"label": {
"function": "Function",
"outputs": "Outputs"
},
"error": {
"inputListener":"Cannot add listener to 'input' event within Function",
"non-message-returned":"Function tried to send a message of type __type__"
}
},
"template": {
"template": "template",
"label": {
"template": "Template",
"property": "Property",
"format": "Syntax Highlight",
"syntax": "Format",
"output": "Output as",
"mustache": "Mustache template",
"plain": "Plain text",
"json": "Parsed JSON",
"yaml": "Parsed YAML",
"none": "none"
},
"templatevalue": "This is the payload: {{payload}} !"
},
"delay": {
"action": "Action",
"for": "For",
"delaymsg": "Delay each message",
"delayfixed": "Fixed delay",
"delayvarmsg": "Override delay with msg.delay",
"randomdelay": "Random delay",
"limitrate": "Rate Limit",
"limitall": "All messages",
"limittopic": "For each msg.topic",
"fairqueue": "Send each topic in turn",
"timedqueue": "Send all topics",
"milisecs": "Miliseconds",
"secs": "Seconds",
"sec": "Second",
"mins": "Minutes",
"min": "Minute",
"hours": "Hours",
"hour": "Hour",
"days": "Days",
"day": "Day",
"between": "Between",
"and": "&",
"rate": "Rate",
"msgper": "msg(s) per",
"dropmsg": "drop intermediate messages",
"label": {
"delay": "delay",
"variable": "variable",
"limit": "limit",
"limitTopic": "limit topic",
"random": "random",
"units" : {
"second": {
"plural" : "Seconds",
"singular": "Second"
},
"minute": {
"plural" : "Minutes",
"singular": "Minute"
},
"hour": {
"plural" : "Hours",
"singular": "Hour"
},
"day": {
"plural" : "Days",
"singular": "Day"
}
}
},
"error": {
"buffer": "buffer exceeded 1000 messages",
"buffer1": "buffer exceeded 10000 messages"
}
},
"trigger": {
"send": "Send",
"then": "then",
"then-send": "then send",
"output": {
"string": "the string",
"number": "the number",
"existing": "the existing msg object",
"original": "the original msg object",
"latest": "the latest msg object",
"nothing": "nothing"
},
"wait-reset": "wait to be reset",
"wait-for": "wait for",
"wait-loop": "resend it every",
"for": "Handling",
"bytopics": "each msg.topic independently",
"alltopics": "all messages",
"duration": {
"ms": "Milliseconds",
"s": "Seconds",
"m": "Minutes",
"h": "Hours"
},
"extend": " extend delay if new message arrives",
"label": {
"trigger": "trigger",
"trigger-block": "trigger & block",
"trigger-loop": "resend every",
"reset": "Reset the trigger if:",
"resetMessage":"msg.reset is set",
"resetPayload":"msg.payload equals",
"resetprompt": "optional"
}
},
"comment": {
"comment": "comment"
},
"unknown": {
"label": {
"unknown": "unknown"
},
"tip": "<p>This node is a type unknown to your installation of Node-RED.</p><p><i>If you deploy with the node in this state, it's configuration will be preserved, but the flow will not start until the missing type is installed.</i></p><p>See the Info side bar for more help</p>"
},
"mqtt": {
"label": {
"broker": "Server",
"example": "e.g. localhost",
"output": "Output",
"qos": "QoS",
"retain": "Retain",
"clientid": "Client ID",
"port": "Port",
"keepalive": "Keep alive time (s)",
"cleansession": "Use clean session",
"use-tls": "Enable secure (SSL/TLS) connection",
"tls-config":"TLS Configuration",
"verify-server-cert":"Verify server certificate",
"compatmode": "Use legacy MQTT 3.1 support"
},
"sections-label":{
"birth-message": "Message sent on connection (birth message)",
"will-message":"Message sent on an unexpected disconnection (will message)",
"close-message":"Message sent before disconnecting (close message)"
},
"tabs-label": {
"connection": "Connection",
"security": "Security",
"messages": "Messages"
},
"placeholder": {
"clientid": "Leave blank for auto generated",
"clientid-nonclean":"Must be set for non-clean sessions",
"will-topic": "Leave blank to disable will message",
"birth-topic": "Leave blank to disable birth message",
"close-topic": "Leave blank to disable close message"
},
"state": {
"connected": "Connected to broker: __broker__",
"disconnected": "Disconnected from broker: __broker__",
"connect-failed": "Connection failed to broker: __broker__"
},
"retain": "Retain",
"output": {
"buffer": "a Buffer",
"string": "a String",
"base64": "a Base64 encoded string",
"auto": "auto-detect (string or buffer)",
"json": "a parsed JSON object"
},
"true": "true",
"false": "false",
"tip": "Tip: Leave topic, qos or retain blank if you want to set them via msg properties.",
"errors": {
"not-defined": "topic not defined",
"missing-config": "missing broker configuration",
"invalid-topic": "Invalid topic specified",
"nonclean-missingclientid": "No client ID set, using clean session",
"invalid-json-string": "Invalid JSON string",
"invalid-json-parse": "Failed to parse JSON string"
}
},
"httpin": {
"label": {
"method": "Method",
"url": "URL",
"doc": "Docs",
"return": "Return",
"upload": "Accept file uploads?",
"status": "Status code",
"headers": "Headers",
"other": "other",
"paytoqs" : "Append msg.payload as query string parameters"
},
"setby": "- set by msg.method -",
"basicauth": "Use basic authentication",
"use-tls": "Enable secure (SSL/TLS) connection",
"tls-config":"TLS Configuration",
"use-proxy": "Use proxy",
"proxy-config": "Proxy Configuration",
"use-proxyauth": "Use proxy authentication",
"noproxy-hosts": "Ignore hosts",
"utf8": "a UTF-8 string",
"binary": "a binary buffer",
"json": "a parsed JSON object",
"tip": {
"in": "The url will be relative to ",
"res": "The messages sent to this node <b>must</b> originate from an <i>http input</i> node",
"req": "Tip: If the JSON parse fails the fetched string is returned as-is."
},
"httpreq": "http request",
"errors": {
"not-created": "Cannot create http-in node when httpNodeRoot set to false",
"missing-path": "missing path",
"no-response": "No response object",
"json-error": "JSON parse error",
"no-url": "No url specified",
"deprecated-call":"Deprecated call to __method__",
"invalid-transport":"non-http transport requested",
"timeout-isnan": "Timeout value is not a valid number, ignoring",
"timeout-isnegative": "Timeout value is negative, ignoring",
"invalid-payload": "Invalid payload"
},
"status": {
"requesting": "requesting"
}
},
"websocket": {
"label": {
"type": "Type",
"path": "Path",
"url": "URL"
},
"listenon": "Listen on",
"connectto": "Connect to",
"sendrec": "Send/Receive",
"payload": "payload",
"message": "entire message",
"tip": {
"path1": "By default, <code>payload</code> will contain the data to be sent over, or received from a websocket. The listener can be configured to send or receive the entire message object as a JSON formatted string.",
"path2": "This path will be relative to ",
"url1": "URL should use ws:&#47;&#47; or wss:&#47;&#47; scheme and point to an existing websocket listener.",
"url2": "By default, <code>payload</code> will contain the data to be sent over, or received from a websocket. The client can be configured to send or receive the entire message object as a JSON formatted string."
},
"status": {
"connected": "connected __count__",
"connected_plural": "connected __count__"
},
"errors": {
"connect-error": "An error occured on the ws connection: ",
"send-error": "An error occurred while sending: ",
"missing-conf": "Missing server configuration",
"duplicate-path": "Cannot have two WebSocket listeners on the same path: __path__"
}
},
"watch": {
"watch": "watch",
"label": {
"files": "File(s)",
"recursive": "Watch sub-directories recursively"
},
"placeholder": {
"files": "Comma-separated list of files and/or directories"
},
"tip": "On Windows you must use double back-slashes \\\\ in any directory names."
},
"tcpin": {
"label": {
"type": "Type",
"output": "Output",
"port": "port",
"host": "at host",
"payload": "payload(s)",
"delimited": "delimited by",
"close-connection": "Close connection after each message is sent?",
"decode-base64": "Decode Base64 message?",
"server": "Server",
"return": "Return",
"ms": "ms",
"chars": "chars"
},
"type": {
"listen": "Listen on",
"connect": "Connect to",
"reply": "Reply to TCP"
},
"output": {
"stream": "stream of",
"single": "single",
"buffer": "Buffer",
"string": "String",
"base64": "Base64 String"
},
"return": {
"timeout": "after a fixed timeout of",
"character": "when character received is",
"number": "a fixed number of chars",
"never": "never - keep connection open",
"immed": "immediately - don't wait for reply"
},
"status": {
"connecting": "connecting to __host__:__port__",
"connected": "connected to __host__:__port__",
"listening-port": "listening on port __port__",
"stopped-listening": "stopped listening on port",
"connection-from": "connection from __host__:__port__",
"connection-closed": "connection closed from __host__:__port__",
"connections": "__count__ connection",
"connections_plural": "__count__ connections"
},
"errors": {
"connection-lost": "connection lost to __host__:__port__",
"timeout": "timeout closed socket port __port__",
"cannot-listen": "unable to listen on port __port__, error: __error__",
"error": "error: __error__",
"socket-error": "socket error from __host__:__port__",
"no-host": "Host and/or port not set",
"connect-timeout": "connect timeout",
"connect-fail": "connect failed"
}
},
"udp": {
"label": {
"listen": "Listen for",
"onport": "on Port",
"using": "using",
"output": "Output",
"group": "Group",
"interface": "Local IF",
"send": "Send a",
"toport": "to port",
"address": "Address",
"decode-base64": "Decode Base64 encoded payload?"
},
"placeholder": {
"interface": "(optional) local interface or address to bind to",
"interfaceprompt": "(optional) local interface or address to bind to",
"address": "destination ip"
},
"udpmsgs": "udp messages",
"mcmsgs": "multicast messages",
"udpmsg": "udp message",
"bcmsg": "broadcast message",
"mcmsg": "multicast message",
"output": {
"buffer": "a Buffer",
"string": "a String",
"base64": "a Base64 encoded string"
},
"bind": {
"random": "bind to random local port",
"local": "bind to local port",
"target": "bind to target port"
},
"tip": {
"in": "Tip: Make sure your firewall will allow the data in.",
"out": "Tip: leave address and port blank if you want to set using <code>msg.ip</code> and <code>msg.port</code>.",
"port": "Ports already in use: "
},
"status": {
"listener-at": "udp listener at __host__:__port__",
"mc-group": "udp multicast group __group__",
"listener-stopped": "udp listener stopped",
"output-stopped": "udp output stopped",
"mc-ready": "udp multicast ready: __iface__:__outport__ -> __host__:__port__",
"bc-ready": "udp broadcast ready: __outport__ -> __host__:__port__",
"ready": "udp ready: __outport__ -> __host__:__port__",
"ready-nolocal": "udp ready: __host__:__port__",
"re-use": "udp re-use socket: __outport__ -> __host__:__port__"
},
"errors": {
"access-error": "UDP access error, you may need root access for ports below 1024",
"error": "error: __error__",
"bad-mcaddress": "Bad Multicast Address",
"interface": "Must be ip address of the required interface",
"ip-notset": "udp: ip address not set",
"port-notset": "udp: port not set",
"port-invalid": "udp: port number not valid",
"alreadyused": "udp: port __port__ already in use",
"ifnotfound": "udp: interface __iface__ not found"
}
},
"switch": {
"switch": "switch",
"label": {
"property": "Property",
"rule": "rule",
"repair" : "recreate message sequences"
},
"and": "and",
"checkall": "checking all rules",
"stopfirst": "stopping after first match",
"ignorecase": "ignore case",
"rules": {
"btwn":"is between",
"cont":"contains",
"regex":"matches regex",
"true":"is true",
"false":"is false",
"null":"is null",
"nnull":"is not null",
"istype":"is of type",
"empty":"is empty",
"nempty":"is not empty",
"head":"head",
"tail":"tail",
"index":"index between",
"exp":"JSONata exp",
"else":"otherwise"
},
"errors": {
"invalid-expr": "Invalid JSONata expression: __error__",
"too-many" : "too many pending messages in switch node"
}
},
"change": {
"label": {
"rules": "Rules",
"rule": "rule",
"set": "set __property__",
"change": "change __property__",
"delete": "delete __property__",
"move": "move __property__",
"changeCount": "change: __count__ rules",
"regex": "Use regular expressions"
},
"action": {
"set": "Set",
"change": "Change",
"delete": "Delete",
"move": "Move",
"to": "to",
"search": "Search for",
"replace": "Replace with"
},
"errors": {
"invalid-from": "Invalid 'from' property: __error__",
"invalid-json": "Invalid 'to' JSON property",
"invalid-expr": "Invalid JSONata expression: __error__"
}
},
"range": {
"range": "range",
"label": {
"action": "Action",
"inputrange": "Map the input range",
"resultrange": "to the result range",
"from": "from",
"to": "to",
"roundresult": "Round result to the nearest integer?"
},
"placeholder": {
"min": "e.g. 0",
"maxin": "e.g. 99",
"maxout": "e.g. 255"
},
"scale": {
"payload": "Scale the message property",
"limit": "Scale and limit to the target range",
"wrap": "Scale and wrap within the target range"
},
"tip": "Tip: This node ONLY works with numbers.",
"errors": {
"notnumber": "Not a number"
}
},
"csv": {
"label": {
"columns": "Columns",
"separator": "Separator",
"c2o": "CSV to Object options",
"o2c": "Object to CSV options",
"input": "Input",
"skip-s": "Skip first",
"skip-e": "lines",
"firstrow": "first row contains column names",
"output": "Output",
"includerow": "include column name row",
"newline": "Newline"
},
"placeholder": {
"columns": "comma-separated column names"
},
"separator": {
"comma": "comma",
"tab": "tab",
"space": "space",
"semicolon": "semicolon",
"colon": "colon",
"hashtag": "hashtag",
"other": "other..."
},
"output": {
"row": "a message per row",
"array": "a single message [array]"
},
"newline": {
"linux": "Linux (\\n)",
"mac": "Mac (\\r)",
"windows": "Windows (\\r\\n)"
},
"errors": {
"csv_js": "This node only handles CSV strings or js objects.",
"obj_csv": "No columns template specified for object -> CSV."
}
},
"html": {
"label": {
"select": "Selector",
"output": "Output",
"in": "in"
},
"output": {
"html": "the html content of the elements",
"text": "only the text content of the elements",
"attr": "an object of any attributes of the elements"
},
"format": {
"single": "as a single message containing an array",
"multi": "as multiple messages, one for each element"
}
},
"json": {
"errors": {
"dropped-object": "Ignored non-object payload",
"dropped": "Ignored unsupported payload type",
"dropped-error": "Failed to convert payload",
"schema-error": "JSON Schema error",
"schema-error-compile": "JSON Schema error: failed to compile schema"
},
"label": {
"o2j": "Object to JSON options",
"pretty": "Format JSON string",
"action": "Action",
"property": "Property",
"actions": {
"toggle": "Convert between JSON String & Object",
"str":"Always convert to JSON String",
"obj":"Always convert to JavaScript Object"
}
}
},
"yaml": {
"errors": {
"dropped-object": "Ignored non-object payload",
"dropped": "Ignored unsupported payload type",
"dropped-error": "Failed to convert payload"
}
},
"xml": {
"label": {
"represent": "Property name for XML tag attributes",
"prefix": "Property name for tag text content",
"advanced": "Advanced options",
"x2o": "XML to Object options"
},
"errors": {
"xml_js": "This node only handles xml strings or js objects."
}
},
"rpi-gpio": {
"label": {
"gpiopin": "GPIO",
"selectpin": "select pin",
"resistor": "Resistor?",
"readinitial": "Read initial state of pin on deploy/restart?",
"type": "Type",
"initpin": "Initialise pin state?",
"debounce": "Debounce",
"freq": "Frequency",
"button": "Button",
"pimouse": "Pi Mouse",
"pikeyboard": "Pi Keyboard",
"left": "Left",
"right": "Right",
"middle": "Middle"
},
"resistor": {
"none": "none",
"pullup": "pullup",
"pulldown": "pulldown"
},
"digout": "Digital output",
"pwmout": "PWM output",
"servo": "Servo output",
"initpin0": "initial level of pin - low (0)",
"initpin1": "initial level of pin - high (1)",
"left": "left",
"right": "right",
"middle": "middle",
"any": "any",
"pinname": "Pin",
"alreadyuse": "already in use",
"alreadyset": "already set as",
"tip": {
"pin": "<b>Pins in Use</b>: ",
"in": "Tip: Only Digital Input is supported - input must be 0 or 1.",
"dig": "Tip: For digital output - input must be 0 or 1.",
"pwm": "Tip: For PWM output - input must be between 0 to 100; setting high frequency might occupy more CPU than expected.",
"ser": "<b>Tip</b>: For Servo output - input must be between 0 to 100. 50 is centre."
},
"types": {
"digout": "digital output",
"input": "input",
"pullup": "input with pull up",
"pulldown": "input with pull down",
"pwmout": "PWM output",
"servo": "Servo output"
},
"status": {
"stopped": "stopped",
"closed": "closed",
"not-running": "not running",
"not-available": "not available",
"na": "N/A : __value__"
},
"errors": {
"ignorenode": "Raspberry Pi specific node set inactive",
"version": "Failed to get version from Pi",
"sawpitype": "Saw Pi Type",
"libnotfound": "Cannot find Pi RPi.GPIO python library",
"alreadyset": "GPIO pin __pin__ already set as type: __type__",
"invalidpin": "Invalid GPIO pin",
"invalidinput": "Invalid input",
"needtobeexecutable": "__command__ needs to be executable",
"mustbeexecutable": "nrgpio must to be executable",
"commandnotfound": "nrgpio command not found",
"commandnotexecutable": "nrgpio command not executable",
"error": "error: __error__",
"pythoncommandnotfound": "nrpgio python command not running"
}
},
"file": {
"label": {
"filename": "Filename",
"action": "Action",
"addnewline": "Add newline (\\n) to each payload?",
"createdir": "Create directory if it doesn't exist?",
"outputas": "Output",
"breakchunks": "Break into chunks",
"breaklines": "Break into lines",
"filelabel": "file",
"sendError": "Send message on error (legacy mode)",
"deletelabel": "delete __file__"
},
"action": {
"append": "append to file",
"overwrite": "overwrite file",
"delete": "delete file"
},
"output": {
"utf8": "a single utf8 string",
"buffer": "a single Buffer object",
"lines": "a msg per line",
"stream": "a stream of Buffers"
},
"status": {
"wrotefile": "wrote to file: __file__",
"deletedfile": "deleted file: __file__",
"appendedfile": "appended to file: __file__"
},
"errors": {
"nofilename": "No filename specified",
"invaliddelete": "Warning: Invalid delete. Please use specific delete option in config dialog.",
"deletefail": "failed to delete file: __error__",
"writefail": "failed to write to file: __error__",
"appendfail": "failed to append to file: __error__",
"createfail": "failed to create file: __error__"
},
"tip": "Tip: The filename should be an absolute path, otherwise it will be relative to the working directory of the Node-RED process."
},
"split": {
"split": "split",
"intro":"Split <code>msg.payload</code> based on type:",
"object":"<b>Object</b>",
"objectSend":"Send a message for each key/value pair",
"strBuff":"<b>String</b> / <b>Buffer</b>",
"array":"<b>Array</b>",
"splitUsing":"Split using",
"splitLength":"Fixed length of",
"stream":"Handle as a stream of messages",
"addname":" Copy key to "
},
"join":{
"join": "join",
"mode":{
"mode":"Mode",
"auto":"automatic",
"merge":"merge sequences",
"reduce":"reduce sequence",
"custom":"manual"
},
"combine":"Combine each",
"create":"to create",
"type":{
"string":"a String",
"array":"an Array",
"buffer":"a Buffer",
"object":"a key/value Object",
"merged":"a merged Object"
},
"using":"using the value of",
"key":"as the key",
"joinedUsing":"joined using",
"send":"Send the message:",
"afterCount":"After a number of message parts",
"count":"count",
"subsequent":"and every subsequent message.",
"afterTimeout":"After a timeout following the first message",
"seconds":"seconds",
"complete":"After a message with the <code>msg.complete</code> property set",
"tip":"This mode assumes this node is either paired with a <i>split</i> node or the received messages will have a properly configured <code>msg.parts</code> property.",
"too-many" : "too many pending messages in join node",
"merge": {
"topics-label":"Merged Topics",
"topics":"topics",
"topic" : "topic",
"on-change":"Send merged message on arrival of a new topic"
},
"reduce": {
"exp": "Reduce exp",
"exp-value": "exp",
"init": "Initial value",
"right": "Evaluate in reverse order (last to first)",
"fixup": "Fix-up exp"
},
"errors": {
"invalid-expr": "Invalid JSONata expression: __error__"
}
},
"sort" : {
"sort": "sort",
"target" : "Sort",
"seq" : "message sequence",
"key" : "Key",
"elem" : "element value",
"order" : "Order",
"ascending" : "ascending",
"descending" : "descending",
"as-number" : "as number",
"invalid-exp" : "Invalid JSONata expression in sort node: __message__",
"too-many" : "Too many pending messages in sort node",
"clear" : "clear pending message in sort node"
},
"batch" : {
"batch": "batch",
"mode": {
"label" : "Mode",
"num-msgs" : "Group by number of messages",
"interval" : "Group by time interval",
"concat" : "Concatenate sequences"
},
"count": {
"label" : "Number of messages",
"overlap" : "Overlap",
"count" : "count",
"invalid" : "Invalid count and overlap"
},
"interval": {
"label" : "Interval",
"seconds" : "seconds",
"empty" : "send empty message when no message arrives"
},
"concat": {
"topics-label": "Topics",
"topic" : "topic"
},
"too-many" : "too many pending messages in batch node",
"unexpected" : "unexpected mode",
"no-parts" : "no parts property in message"
}
}