-
+
-
-
- Layer 2 Quality of Service |
-
-
- |
- See note below |
-
-
-
- Telnet |
-
-
- |
- Enable it at your own risk |
-
-
-
- NODMS |
-
-
- |
- Disable DMS announcement. |
-
-
-
- NODVBT |
-
-
- |
- Disable DVBT announcement. |
-
-
-
- No DVB switch |
-
-
- |
- Disable DVB switch emulation on S8. |
-
-
-
-
-
+
+
+
+ Layer 2 Quality of Service |
+
-
- |
-
-
+ |
+ See note:
+ English
+ Deutsch
+ |
+
+
+
+ Telnet |
+
+
+ |
+ Enable it at your own risk |
+
+
+
+ Disable DMS announcement |
+
+
+ |
+ |
+
+
+
+ Disable DVBT announcement |
+
+
+ |
+ |
+
+
+
+ Enforce strict SAT>IP |
+
+
+ |
+ See note:
+ English
+ Deutsch
+ |
+
+
+
+ Disable multiswitch emulation |
+
+
+ |
+ See note:
+ English
+ Deutsch
+ |
+
+
+
+
+
+
+
+ |
+
+
+
-
-
- Layer 2 Quality of Service
- This is defined in the IEEE 802.1Q VLAN standard, and provides QoS in a local network.
- For it to work all components in the LAN must either be transparent to it or need to support it.
- hubs: always transparent.
- dumb switches: usually transparent, better ones use it to prioritise the traffic.
- smart switches: depends on setting.
- PCs and the like: newer systems support it by default, for older systems check the LAN adapter settings.
- WLAN access points: depends on firmware and model. OpenWRT based devices usually work.
-
- Dies ist im IEEE 802.1Q VLAN Standard definiert und erlaubt QoS im lokalem Netz.
- Damit es funktioniert müssen alle Netzwerkkompenenten im LAN entweder transparent sein oder es unterstützen.
- Hubs: sind immer transparent
- Dumb Switches: normalerweise transparent, bessere prioritisieren damit den Datenverkehr
- Smart Switches: hängt von den Einstellungen ab
- PCs und dergleichen: neue Systeme unterstützten es defaultmässig, für ältere in den Einstellungen der Netzwerkarte nachschauen
- WLAN Accesspoints: hängt von Modell und deren Firmware ab. OpenWRT basierte Geräte unterstützen es normalerweise
+
+
+
+ Layer 2 Quality of Service
+ This is defined in the IEEE 802.1Q VLAN standard, and provides QoS in a local network.
+ For it to work all components in the LAN must either be transparent to it or need to support it.
+ hubs: always transparent.
+ dumb switches: usually transparent, better ones use it to prioritise the traffic.
+ smart switches: depends on setting.
+ PCs and the like: newer systems support it by default, for older systems check the LAN adapter settings.
+ WLAN access points: depends on firmware and model. OpenWRT based devices usually work.
+
+
+
+
+ Layer 2 Quality of Service
+ Dies ist im IEEE 802.1Q VLAN Standard definiert und erlaubt QoS im lokalem Netz.
+ Damit es funktioniert müssen alle Netzwerkkompenenten im LAN entweder transparent sein oder es unterstützen.
+ Hubs: sind immer transparent
+ Dumb Switches: normalerweise transparent, bessere prioritisieren damit den Datenverkehr
+ Smart Switches: hängt von den Einstellungen ab
+ PCs und dergleichen: neue Systeme unterstützten es defaultmässig, für ältere in den Einstellungen der Netzwerkarte nachschauen
+ WLAN Accesspoints: hängt von Modell und deren Firmware ab. OpenWRT basierte Geräte unterstützen es normalerweise
+
+
+
+
+ Multiswitch emulation on OctopusNet S8
+ Multiswitch emulation allows to connect directly a Quad/Quattro LNB to the 4 inputs on the S8.
+ Disabling configures the S8 to a standard 4 input system
+
+
+
+
+ Multischalter-Emulation OctopusNet S8
+ Multischalter-Emulation erlaubt den direkten Anschluß eines Quad/Quattro LNB an die S8
+ Abschalten konfiguriert die S8 als ein Standard System mit 4 Eingängen
+
+
+
+
+ Enforce strict SAT>IP
+
+ The SAT>IP specification allows a second client to receive a stream created by another client.
+ The OctopusNet allows to modify some parameters (like PIDs) on this second stream. The original stream is not affected bei this.
+
+ Enforce strict SAT>IP disables this enhancment.
+
+ Do this for testing clients to ensure they are compatible with other SAT>IP servers
+
+
+
+
+ Erzwinge strictes SAT>IP
+
+ Die SAT>IP Specification erlaubt einem zweiten Client das Empfangen eines von einem anderen Client angelegten Stream. Die OctopusNet erlaubt
+ die Änderung eingiger Parameter (z.B. PIDs) für diesen Stream. Der orginale Stream wird dadurch nicht beinflusst.
+
+ Das Erzwingen von stricten SAT>IP achaltet diese Erweiterung ab.
+
+ Beim Testen von Clients ist es sinnvoll diesen Parameter zu setzen um die Kompatibilität mit anderen SAT>IP Servern sicherzustellen.
+
diff --git a/octoserve/var/www/systemsettings.lua b/octoserve/var/www/systemsettings.lua
index 3467a14..6e5344b 100644
--- a/octoserve/var/www/systemsettings.lua
+++ b/octoserve/var/www/systemsettings.lua
@@ -71,17 +71,18 @@ if query ~= "" then
name,value = string.match(v,"(%w+)%=(%d+)")
if( WriteSetting(name,value == "1") ) then
if name == "telnet" then
- os.rename("/etc/securetty","/etc/securetty.bak"); -- temp fix to allow root login on telnet
+--~ os.rename("/etc/securetty","/etc/securetty.bak"); -- temp fix to allow root login on telnet
os.execute("/etc/init.d/S91telnet restart")
end
if name == "vlan" then restart = 1 end
if name == "nodms" then restart = 1 end
if name == "nodvbt" then restart = 1 end
if name == "noswitch" then restart = 1 end
- nextloc = "wait.html?5"
+ if name == "strict" then restart = 1 end
+ nextloc = "wait.html?10"
end
end
- if restart == 1 then os.execute("/etc/init.d/S99octo restartoctonet&") end
+ if restart == 1 then os.execute("/etc/init.d/S99octo restartoctonet > /dev/null 2>&1 &") end
print(proto.." 303")
print("Location: http://"..host.."/"..nextloc)
print("")
@@ -121,7 +122,14 @@ else
else
print("noswitchEnabled = false;")
end
-
+
+ if ReadSetting("strict") then
+ print("strictEnabled = true;")
+ else
+ print("strictEnabled = false;")
+ end
+
+
end
|