ovpn, uap0 compatibility; readme

README.md

@@ -16,6 +16,7 @@ We hope you enjoy using RaspAP as much as we do creating it. Tell us how you use
 
  - [Prerequisites](#prerequisites)
  - [Quick installer](#quick-installer)
+ - [Bridged AP](#bridged-ap)
  - [Simultaneous AP and Wifi client](#simultaneous-ap-and-wifi-client)
  - [Support us](#support-us)
  - [Manual installation](#manual-installation)
@@ -60,6 +61,11 @@ configured as an access point as follows:
 
 **Note:** As the name suggests, the Quick Installer is a great way to quickly setup a new AP. However, it does not automagically detect the unique configuration of your RPi. Best results are obtained by connecting an RPi to ethernet (`eth0`) or as a WiFi client, also known as managed mode, with `wlan0`. For the latter, refer to [this FAQ](https://github.com/billz/raspap-webgui/wiki/FAQs#how-do-i-prepare-the-sd-card-to-connect-to-wifi-in-headless-mode). Please [read this](https://github.com/billz/raspap-webgui/wiki/Reporting-issues) before reporting an issue.
 
+## Bridged AP
+By default RaspAP configures a routed AP for your clients to connect to. A bridged AP configuration is also possible. Slide the **Bridged AP mode** toggle under the **Advanced** tab of **Configure hotspot**, then save and restart the hotspot.
+
+**Note:** In bridged mode, all routing capabilities are handled by your upstream router. Because your router assigns IP addresses to your RPi's hotspot and its clients, you might not be able to reach the RaspAP web interface from the default `10.3.141.1` address. Instead use your RPi's hostname followed by `.local` to access the RaspAP web interface. With Raspbian default settings, this should look like `raspberrypi.local`.
+
 ## Simultaneous AP and Wifi client
 RaspAP lets you easily create an AP with a Wifi client configuration. With your RPi configured in managed mode, enable the AP from the **Advanced** tab of **Configure hotspot** by sliding the **Wifi client AP mode** toggle. Save settings and start the hotspot. The managed mode AP is functional without restart.
 

includes/hostapd.php

@@ -246,11 +246,11 @@ function SaveHostAPDConfig($wpa_array, $enc_types, $modes, $interfaces, $status)
         }
         if ($wifiAPEnable == 1) {
             $config.= 'interface=uap0'.PHP_EOL;
+        } elseif ($bridgedEnable == 1) {
+            $config.='interface='.RASPI_WIFI_CLIENT_INTERFACE.PHP_EOL;
+            $config.= 'bridge=br0'.PHP_EOL;
         } else {
             $config.= 'interface='.$_POST['interface'].PHP_EOL;
-            if ($bridgedEnable == 1) {
-                $config.= 'bridge=br0'.PHP_EOL;
-            }
         }
         $config.= 'wpa='.$_POST['wpa'].PHP_EOL;
         $config.= 'wpa_pairwise='.$_POST['wpa_pairwise'].PHP_EOL;

includes/openvpn.php

@@ -21,12 +21,14 @@ function DisplayOpenVPNConfig()
         } elseif (isset($_POST['StartOpenVPN'])) {
             $status->addMessage('Attempting to start OpenVPN', 'info');
             exec('sudo /bin/systemctl start openvpn-client@client', $return);
+            exec('sudo /bin/systemctl enable openvpn-client@client', $return);
             foreach ($return as $line) {
                 $status->addMessage($line, 'info');
             }
         } elseif (isset($_POST['StopOpenVPN'])) {
             $status->addMessage('Attempting to stop OpenVPN', 'info');
             exec('sudo /bin/systemctl stop openvpn-client@client', $return);
+            exec('sudo /bin/systemctl disable openvpn-client@client', $return);
             foreach ($return as $line) {
                 $status->addMessage($line, 'info');
             }

installers/common.sh

@@ -325,7 +325,9 @@ function patch_system_files() {
         "/bin/systemctl start dnsmasq.service"
         "/bin/systemctl stop dnsmasq.service"
         "/bin/systemctl start openvpn-client@client"
+        "/bin/systemctl enable openvpn-client@client"
         "/bin/systemctl stop openvpn-client@client"
+        "/bin/systemctl disable openvpn-client@client"
         "/bin/cp /tmp/ovpnclient.ovpn /etc/openvpn/client/client.conf"
         "/bin/cp /tmp/authdata /etc/openvpn/client/login.conf"
         "/bin/cp /tmp/dnsmasqdata /etc/dnsmasq.conf"

installers/configauth.sh

@@ -34,6 +34,7 @@ lines=(
 
 for line in "${lines[@]}"; do
     if grep "$line" /etc/rc.local > /dev/null; then
+        echo "$line: Line already added"
     else
         sudo sed -i "s/^exit 0$/$line\nexit 0/" /etc/rc.local
         echo "Adding rule: $line"

installers/servicestart.sh

@@ -7,6 +7,7 @@ NAME=raspap
 DESC="Service control for RaspAP"
 CONFIGFILE="/etc/raspap/hostapd.ini"
 DAEMONPATH="/lib/systemd/system/raspap.service"
+OPENVPNENABLED=$(pidof openvpn | wc -l)
 
 positional=()
 while [[ $# -gt 0 ]]
@@ -29,6 +30,7 @@ done
 set -- "${positional[@]}"
 
 echo "Stopping network services..."
+systemctl stop openvpn-client@client
 systemctl stop systemd-networkd
 systemctl stop hostapd.service
 systemctl stop dnsmasq.service
@@ -51,6 +53,9 @@ if [ -r "$CONFIGFILE" ]; then
             ip link set down eth0
             ip link set up eth0
 
+            echo "Removing uap0 interface..."
+            iw dev uap0 del
+
             echo "Enabling systemd-networkd"
             systemctl start systemd-networkd
             systemctl enable systemd-networkd
@@ -87,5 +92,9 @@ sleep "${seconds}"
 
 systemctl start dnsmasq.service
 
+if [ $OPENVPNENABLED -eq 1 ]; then
+    systemctl start openvpn-client@client
+fi
+
 echo "RaspAP service start DONE"