frodovdr/raspap-webgui
1
0
Fork 0
mirror of https://github.com/billz/raspap-webgui.git synced 2025-03-01 10:31:47 +00:00
Code Issues Packages Projects Releases Wiki Activity

Updated manual installation steps

Browse Source
This commit is contained in:
billz 2017-11-17 07:11:18 +00:00
parent 5d9d58630c
commit d22cdd6e68
1 changed files with 15 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

19
README.md
View File

@ -48,13 +48,13 @@ configured as an access point as follows:
* Password: ChangeMe * Password: ChangeMe
## Manual installation ## Manual installation
Start off by installing git, lighttpd, php5, hostapd and dnsmasq. These steps apply to the latest release of Raspbian (currently [Stretch](https://www.raspberrypi.org/downloads/raspbian/)). Notes for previously released versions are provided, where applicable. Start off by installing git, lighttpd, php7, hostapd and dnsmasq.
```sh ```sh
$ sudo apt-get install git lighttpd php5-cgi hostapd dnsmasq $ sudo apt-get install git lighttpd php7.0-cgi hostapd dnsmasq
``` ```
After that, enable PHP for lighttpd and restart it for the settings to take effect. **Note:** for Raspbian Jessie and Wheezy, replace `php7.0-cgi` with `php5-cgi`. After that, enable PHP for lighttpd and restart it for the settings to take effect.
```sh ```sh
sudo lighty-enable-mod fastcgi-php sudo lighttpd-enable-mod fastcgi-php
sudo service lighttpd restart sudo service lighttpd restart
``` ```
Now comes the fun part. For security reasons, the `www-data` user which lighttpd runs under is not allowed to start or stop daemons, or run commands like ifdown and ifup, all of which we want our page to do. Now comes the fun part. For security reasons, the `www-data` user which lighttpd runs under is not allowed to start or stop daemons, or run commands like ifdown and ifup, all of which we want our page to do.
@ -77,6 +77,12 @@ www-data ALL=(ALL) NOPASSWD:/etc/init.d/dnsmasq stop
www-data ALL=(ALL) NOPASSWD:/bin/cp /tmp/dhcpddata /etc/dnsmasq.conf www-data ALL=(ALL) NOPASSWD:/bin/cp /tmp/dhcpddata /etc/dnsmasq.conf
www-data ALL=(ALL) NOPASSWD:/sbin/shutdown -h now www-data ALL=(ALL) NOPASSWD:/sbin/shutdown -h now
www-data ALL=(ALL) NOPASSWD:/sbin/reboot www-data ALL=(ALL) NOPASSWD:/sbin/reboot
www-data ALL=(ALL) NOPASSWD:/sbin/ip link set wlan0 down
www-data ALL=(ALL) NOPASSWD:/sbin/ip link set wlan0 up
www-data ALL=(ALL) NOPASSWD:/sbin/ip -s a f label wlan0
www-data ALL=(ALL) NOPASSWD:/bin/cp /etc/raspap/networking/dhcpcd.conf /etc/dhcpcd.conf
www-data ALL=(ALL) NOPASSWD:/etc/raspap/hostapd/enablelog.sh
www-data ALL=(ALL) NOPASSWD:/etc/raspap/hostapd/disablelog.sh
``` ```
Once those modifications are done, git clone the files to `/var/www/html`. Once those modifications are done, git clone the files to `/var/www/html`.
@ -96,6 +102,11 @@ sudo mkdir /etc/raspap
sudo mv /var/www/html/raspap.php /etc/raspap/ sudo mv /var/www/html/raspap.php /etc/raspap/
sudo chown -R www-data:www-data /etc/raspap sudo chown -R www-data:www-data /etc/raspap
``` ```
Move the HostAPD logging scripts to the correct location
```sh
sudo mkdir /etc/raspap/hostapd
sudo mv /var/www/html/installers/*log.sh /etc/raspap/hostapd
```
Reboot and it should be up and running! Reboot and it should be up and running!
```sh ```sh
sudo reboot sudo reboot