Initial commit

installers/hostapdstart.sh

@@ -0,0 +1,43 @@
+#!/bin/bash
+
+# When wireless client AP mode is enabled, this script handles starting up network services in a specific order and timing to avoid race conditions.
+# Todo: update /etc/rc.local script with /bin/bash /usr/local/bin/hostapdstart.sh to enable at system startup
+
+# Make sure services are not running
+echo "Stopping network services..."
+systemctl stop hostapd.service
+systemctl stop dnsmasq.service
+systemctl stop dhcpcd.service
+
+# Check that no uap0 interface exists 
+echo "Removing uap0 interface..."
+iw dev uap0 del
+
+# Add uap0 interface 
+echo "Adding uap0 interface..."
+iw dev wlan0 interface add uap0 type __ap
+
+# Modify iptables (todo: persist to /etc/rc.local as with default rules)
+echo "IPV4 forwarding: setting..."
+sysctl net.ipv4.ip_forward=1
+echo "Editing IP tables..."
+iptables -t nat -A POSTROUTING -s 192.168.50.0/24 ! -d 192.168.50.0/24 -j MASQUERADE
+
+# Enable uap0 interface
+ifconfig uap0 up
+
+# Start hostapd, mitigating race condition
+echo "Starting hostapd service..."
+systemctl start hostapd.service
+sleep 5
+
+# Start dhcpcd
+echo "Starting dhcpcd service..."
+systemctl start dhcpcd.service
+sleep 5
+
+echo "Starting dnsmasq service..."
+systemctl start dnsmasq.service
+
+echo "hostapdstart DONE"
+

installers/services.sh

@@ -0,0 +1,12 @@
+#!/bin/bash
+
+# When wireless client AP mode is enabled, the hostapdstart script handles starting up network services 
+# in a specific order and timing to avoid race conditions. Disabling them here ensures they are not run
+# at system startup.
+
+sudo systemctl stop hostapd
+sudo systemctl stop dnsmasq
+sudo systemctl stop dhcpcd
+sudo systemctl disable hostapd
+sudo systemctl disable dnsmasq
+sudo systemctl disable dhcpcd