diff --git a/config/defaults.json b/config/defaults.json
index ff8609a8..cfb2dac1 100644
--- a/config/defaults.json
+++ b/config/defaults.json
@@ -63,23 +63,84 @@
           "ieee80211n=1",
           "ieee80211ac=1",
           "ieee80211ax=1",
-          "# HE capabilities",
+          "# Maximum MPDU Length of HE 6 GHz band capabilities.",
+          "# Indicates maximum MPDU length",
+          "# 0 = 3895 octets",
+          "# 1 = 7991 octets",
+          "# 2 = 11454 octets",
+          "he_6ghz_max_mpdu=2",
+          "# Maximum A-MPDU Length Exponent of HE 6 GHz band capabilities. Indicates",
+          "# the maximum length of A-MPDU pre-EOF padding that # the STA can receive.",
+          "# This field is an integer in the range of 0 to 7. The length defined by",
+          "# this field is equal to 2 pow(13 + Maximum A-MPDU Length Exponent) -1",
+          "# octets",
+          "# 0 = AMPDU length of 8k",
+          "# 1 = AMPDU length of 16k",
+          "# 2 = AMPDU length of 32k",
+          "# 3 = AMPDU length of 65k",
+          "# 4 = AMPDU length of 131k",
+          "# 5 = AMPDU length of 262kv",
+          "# 6 = AMPDU length of 524k",
+          "# 7 = AMPDU length of 1048k",
+          "he_6ghz_max_ampdu_len_exp=7",
+          "# 0 = Indoor AP",
+          "# 1 = Standard power AP",
+          "# 2 = Very low power AP (default)",
+          "# 3 = Indoor enabled AP",
+          "# 4 = Indoor standard power AP",
+          "he_6ghz_reg_pwr_type=0",
+          "# HE beamforming capabilities",
           "he_su_beamformer=1",
           "he_su_beamformee=1",
           "he_mu_beamformer=1",
-          "he_bss_color=1",
+          "he_mu_edca_qos_info_param_count=0",
+          "he_mu_edca_qos_info_q_ack=0",
+          "he_mu_edca_qos_info_queue_request=0",
+          "he_mu_edca_qos_info_txop_request=0",
+          "he_mu_edca_ac_be_aifsn=8",
+          "he_mu_edca_ac_be_aci=0",
+          "he_mu_edca_ac_be_ecwmin=9",
+          "he_mu_edca_ac_be_ecwmax=10",
+          "he_mu_edca_ac_be_timer=255",
+          "he_mu_edca_ac_bk_aifsn=15",
+          "he_mu_edca_ac_bk_aci=1",
+          "he_mu_edca_ac_bk_ecwmin=9",
+          "he_mu_edca_ac_bk_ecwmax=10",
+          "he_mu_edca_ac_bk_timer=255",
+          "he_mu_edca_ac_vi_ecwmin=5",
+          "he_mu_edca_ac_vi_ecwmax=7",
+          "he_mu_edca_ac_vi_aifsn=5",
+          "he_mu_edca_ac_vi_aci=2",
+          "he_mu_edca_ac_vi_timer=255",
+          "he_mu_edca_ac_vo_aifsn=5",
+          "he_mu_edca_ac_vo_aci=3",
+          "he_mu_edca_ac_vo_ecwmin=5",
+          "he_mu_edca_ac_vo_ecwmax=7",
+          "he_mu_edca_ac_vo_timer=255",
+          "# EHT beamforming capabilities",
+          "eht_su_beamformer=0",
+          "eht_su_beamformee=0",
+          "eht_mu_beamformer=0",
+          "# used by clients to discern the source of interference",
+          "# each AP in your area needs to use a different number",
+          "# allowed: 1-63",
+          "he_bss_color=37",
           "# 160 MHz for HE",
           "he_oper_chwidth=2",
           "he_oper_centr_freq_seg0_idx={HE_FREQ_IDX}",
-          "# Enable 802.11be",
+          "# IEEE 802.11be (WiFi 7) configuration",
           "ieee80211be=1",
           "# EHT configuration",
           "eht_su_beamformer=1",
           "eht_su_beamformee=1",
           "eht_mu_beamformer=1",
-          "eht_oper_chwidth=2",
-          "# EHT operation parameters",
-          "# 160 MHz, 0=20, 1=40, 2=80, 3=160, 4=320",
+          "# EHT operating channel information; see matching he_* parameters for details.",
+          "# The field eht_oper_centr_freq_seg0_idx field is used to indicate center",
+          "# frequency of 40, 80, and 160 MHz bandwidth operation.",
+          "# In the 6 GHz band, eht_oper_chwidth is ignored and the channel width is",
+          "# derived from the configured operating class (IEEE P802.11be/D1.5,",
+          "# Annex E.1 - Country information and operating classes).",
+          "# Channel width (0 = 40 MHz, 1 = 80 Mhz, 2 = 160 Mhz)",
           "eht_oper_chwidth=2",
           "eht_oper_centr_freq_seg0_idx={VHT_FREQ_IDX}",
           "# VHT operation parameters",