1
0
mirror of https://github.com/billz/raspap-webgui.git synced 2023-10-10 13:37:24 +02:00
raspap-webgui/installers/common.sh
D9ping 03f2620e48 Backup php.ini to $raspap_dir/backups folder.
Ask for before changing php configuration of httpOnly and opcache.
Do not change session.use_strict_mode, no extra question.
Ask to restore backup of php.ini from $raspap_dir/backups folder in uninstall.sh.

Signed-off-by: D9ping <D9ping@users.noreply.github.com>
2018-08-31 23:38:30 +02:00

344 lines
13 KiB
Bash
Executable File

raspap_dir="/etc/raspap"
raspap_user="www-data"
version=`sed 's/\..*//' /etc/debian_version`
# Determine version, set default home location for lighttpd and
# php package to install
webroot_dir="/var/www/html"
if [ $version -eq 9 ]; then
version_msg="Raspian 9.0 (Stretch)"
php_package="php7.0-cgi"
elif [ $version -eq 8 ]; then
version_msg="Raspian 8.0 (Jessie)"
php_package="php5-cgi"
else
version_msg="Raspian earlier than 8.0 (Wheezy)"
webroot_dir="/var/www"
php_package="php5-cgi"
fi
phpcgiconf=""
if [ "$php_package" = "php7.0-cgi" ]; then
phpcgiconf="/etc/php/7.0/cgi/php.ini"
elif [ "$php_package" = "php5-cgi" ]; then
phpcgiconf="/etc/php5/cgi/php.ini"
fi
# Outputs a RaspAP Install log line
function install_log() {
echo -e "\033[1;32mRaspAP Install: $*\033[m"
}
# Outputs a RaspAP Install Error log line and exits with status code 1
function install_error() {
echo -e "\033[1;37;41mRaspAP Install Error: $*\033[m"
exit 1
}
# Outputs a RaspAP Warning line
function install_warning() {
echo -e "\033[1;33mWarning: $*\033[m"
}
# Outputs a welcome message
function display_welcome() {
raspberry='\033[0;35m'
green='\033[1;32m'
echo -e "${raspberry}\n"
echo -e " 888888ba .d888888 888888ba"
echo -e " 88 8b d8 88 88 8b"
echo -e "a88aaaa8P' .d8888b. .d8888b. 88d888b. 88aaaaa88a a88aaaa8P"
echo -e " 88 8b. 88 88 Y8ooooo. 88 88 88 88 88"
echo -e " 88 88 88. .88 88 88. .88 88 88 88"
echo -e " dP dP 88888P8 88888P 88Y888P 88 88 dP"
echo -e " 88"
echo -e " dP"
echo -e "${green}"
echo -e "The Quick Installer will guide you through a few easy steps\n\n"
}
### NOTE: all the below functions are overloadable for system-specific installs
### NOTE: some of the below functions MUST be overloaded due to system-specific installs
function config_installation() {
install_log "Configure installation"
echo "Detected ${version_msg}"
echo "Install directory: ${raspap_dir}"
echo "Lighttpd directory: ${webroot_dir}"
echo -n "Complete installation with these values? [y/N]: "
read answer
if [[ $answer != "y" ]]; then
echo "Installation aborted."
exit 0
fi
}
# Runs a system software update to make sure we're using all fresh packages
function update_system_packages() {
# OVERLOAD THIS
install_error "No function definition for update_system_packages"
}
# Installs additional dependencies using system package manager
function install_dependencies() {
# OVERLOAD THIS
install_error "No function definition for install_dependencies"
}
# Enables PHP for lighttpd and restarts service for settings to take effect
function enable_php_lighttpd() {
install_log "Enabling PHP for lighttpd"
sudo lighttpd-enable-mod fastcgi-php
sudo service lighttpd force-reload
sudo /etc/init.d/lighttpd restart || install_error "Unable to restart lighttpd"
}
# Verifies existence and permissions of RaspAP directory
function create_raspap_directories() {
install_log "Creating RaspAP directories"
if [ -d "$raspap_dir" ]; then
sudo mv $raspap_dir "$raspap_dir.`date +%F-%R`" || install_error "Unable to move old '$raspap_dir' out of the way"
fi
sudo mkdir -p "$raspap_dir" || install_error "Unable to create directory '$raspap_dir'"
# Create a directory for existing file backups.
sudo mkdir -p "$raspap_dir/backups"
# Create a directory to store networking configs
sudo mkdir -p "$raspap_dir/networking"
# Copy existing dhcpcd.conf to use as base config
cat /etc/dhcpcd.conf | sudo tee -a /etc/raspap/networking/defaults
sudo chown -R $raspap_user:$raspap_user "$raspap_dir" || install_error "Unable to change file ownership for '$raspap_dir'"
}
# Generate logging enable/disable files for hostapd
function create_logging_scripts() {
install_log "Creating logging scripts"
sudo mkdir $raspap_dir/hostapd || install_error "Unable to create directory '$raspap_dir/hostapd'"
# Move existing shell scripts
sudo mv "$webroot_dir/installers/"*log.sh "$raspap_dir/hostapd" || install_error "Unable to move logging scripts"
# Make enablelog.sh and disablelog.sh not writable by www-data group.
sudo chown -c root:"$raspap_user" "$raspap_dir/hostapd/"*log.sh || install_error "Unable change owner and/or group."
sudo chmod 750 "$raspap_dir/hostapd/"*log.sh || install_error "Unable to change file permissions."
}
# Fetches latest files from github to webroot
function download_latest_files() {
if [ -d "$webroot_dir" ]; then
sudo mv $webroot_dir "$webroot_dir.`date +%F-%R`" || install_error "Unable to remove old webroot directory"
fi
install_log "Cloning latest files from github"
git clone --depth 1 https://github.com/billz/raspap-webgui /tmp/raspap-webgui || install_error "Unable to download files from github"
sudo mv /tmp/raspap-webgui $webroot_dir || install_error "Unable to move raspap-webgui to web root"
}
# Sets files ownership in web root directory
function change_file_ownership() {
if [ ! -d "$webroot_dir" ]; then
install_error "Web root directory doesn't exist"
fi
install_log "Changing file ownership in web root directory"
sudo chown -R $raspap_user:$raspap_user "$webroot_dir" || install_error "Unable to change file ownership for '$webroot_dir'"
}
# Check for existing /etc/network/interfaces and /etc/hostapd/hostapd.conf files
function check_for_old_configs() {
if [ -f /etc/network/interfaces ]; then
sudo cp /etc/network/interfaces "$raspap_dir/backups/interfaces.`date +%F-%R`"
sudo ln -sf "$raspap_dir/backups/interfaces.`date +%F-%R`" "$raspap_dir/backups/interfaces"
fi
if [ -f /etc/hostapd/hostapd.conf ]; then
sudo cp /etc/hostapd/hostapd.conf "$raspap_dir/backups/hostapd.conf.`date +%F-%R`"
sudo ln -sf "$raspap_dir/backups/hostapd.conf.`date +%F-%R`" "$raspap_dir/backups/hostapd.conf"
fi
if [ -f /etc/dnsmasq.conf ]; then
sudo cp /etc/dnsmasq.conf "$raspap_dir/backups/dnsmasq.conf.`date +%F-%R`"
sudo ln -sf "$raspap_dir/backups/dnsmasq.conf.`date +%F-%R`" "$raspap_dir/backups/dnsmasq.conf"
fi
if [ -f /etc/dhcpcd.conf ]; then
sudo cp /etc/dhcpcd.conf "$raspap_dir/backups/dhcpcd.conf.`date +%F-%R`"
sudo ln -sf "$raspap_dir/backups/dhcpcd.conf.`date +%F-%R`" "$raspap_dir/backups/dhcpcd.conf"
fi
if [ -f /etc/rc.local ]; then
sudo cp /etc/rc.local "$raspap_dir/backups/rc.local.`date +%F-%R`"
sudo ln -sf "$raspap_dir/backups/rc.local.`date +%F-%R`" "$raspap_dir/backups/rc.local"
fi
}
# Move configuration file to the correct location
function move_config_file() {
if [ ! -d "$raspap_dir" ]; then
install_error "'$raspap_dir' directory doesn't exist"
fi
install_log "Moving configuration file to '$raspap_dir'"
sudo mv "$webroot_dir"/raspap.php "$raspap_dir" || install_error "Unable to move files to '$raspap_dir'"
sudo chown -R $raspap_user:$raspap_user "$raspap_dir" || install_error "Unable to change file ownership for '$raspap_dir'"
}
# Set up default configuration
function default_configuration() {
install_log "Setting up hostapd"
if [ -f /etc/default/hostapd ]; then
sudo mv /etc/default/hostapd /tmp/default_hostapd.old || install_error "Unable to remove old /etc/default/hostapd file"
fi
sudo mv $webroot_dir/config/default_hostapd /etc/default/hostapd || install_error "Unable to move hostapd defaults file"
sudo mv $webroot_dir/config/hostapd.conf /etc/hostapd/hostapd.conf || install_error "Unable to move hostapd configuration file"
sudo mv $webroot_dir/config/dnsmasq.conf /etc/dnsmasq.conf || install_error "Unable to move dnsmasq configuration file"
sudo mv $webroot_dir/config/dhcpcd.conf /etc/dhcpcd.conf || install_error "Unable to move dhcpcd configuration file"
# Generate required lines for Rasp AP to place into rc.local file.
# #RASPAP is for removal script
lines=(
'echo 1 > \/proc\/sys\/net\/ipv4\/ip_forward #RASPAP'
'iptables -t nat -A POSTROUTING -j MASQUERADE #RASPAP'
)
for line in "${lines[@]}"; do
if grep "$line" /etc/rc.local > /dev/null; then
echo "$line: Line already added"
else
sudo sed -i "s/^exit 0$/$line\nexit 0/" /etc/rc.local
echo "Adding line $line"
fi
done
}
# Add a single entry to the sudoers file
function sudo_add() {
sudo bash -c "echo \"www-data ALL=(ALL) NOPASSWD:$1\" | (EDITOR=\"tee -a\" visudo)" \
|| install_error "Unable to patch /etc/sudoers"
}
# Adds www-data user to the sudoers file with restrictions on what the user can execute
function patch_system_files() {
# add symlink to prevent wpa_cli cmds from breaking with multiple wlan interfaces
install_log "symlinked wpa_supplicant hooks for multiple wlan interfaces"
sudo ln -s /usr/share/dhcpcd/hooks/10-wpa_supplicant /etc/dhcp/dhclient-enter-hooks.d/
# Set commands array
cmds=(
"/sbin/ifdown"
"/sbin/ifup"
"/bin/cat /etc/wpa_supplicant/wpa_supplicant.conf"
"/bin/cat /etc/wpa_supplicant/wpa_supplicant-wlan[0-9].conf"
"/bin/cp /tmp/wifidata /etc/wpa_supplicant/wpa_supplicant.conf"
"/bin/cp /tmp/wifidata /etc/wpa_supplicant/wpa_supplicant-wlan[0-9].conf"
"/sbin/wpa_cli -i wlan[0-9] scan_results"
"/sbin/wpa_cli -i wlan[0-9] scan"
"/sbin/wpa_cli reconfigure"
"/bin/cp /tmp/hostapddata /etc/hostapd/hostapd.conf"
"/etc/init.d/hostapd start"
"/etc/init.d/hostapd stop"
"/etc/init.d/dnsmasq start"
"/etc/init.d/dnsmasq stop"
"/bin/cp /tmp/dhcpddata /etc/dnsmasq.conf"
"/sbin/shutdown -h now"
"/sbin/reboot"
"/sbin/ip link set wlan[0-9] down"
"/sbin/ip link set wlan[0-9] up"
"/sbin/ip -s a f label wlan[0-9]"
"/bin/cp /etc/raspap/networking/dhcpcd.conf /etc/dhcpcd.conf"
"/etc/raspap/hostapd/enablelog.sh"
"/etc/raspap/hostapd/disablelog.sh"
)
# Check if sudoers needs patching
if [ $(sudo grep -c www-data /etc/sudoers) -ne 28 ]
then
# Sudoers file has incorrect number of commands. Wiping them out.
install_log "Cleaning sudoers file"
sudo sed -i '/www-data/d' /etc/sudoers
install_log "Patching system sudoers file"
# patch /etc/sudoers file
for cmd in "${cmds[@]}"
do
sudo_add $cmd
IFS=$'\n'
done
else
install_log "Sudoers file already patched"
fi
}
# Change configuration of php-cgi.
function reconfigure_php() {
if [ ! -f "$phpcgiconf" ]; then
install_warning "PHP configuration could not be found."
return
fi
# Backup php.ini and create symlink for restoring.
datetimephpconf=$(date +%F-%R)
sudo cp "$phpcgiconf" "$raspap_dir/backups/php.ini.$datetimephpconf"
sudo ln -sf "$raspap_dir/backups/php.ini.$datetimephpconf" "$raspap_dir/backups/php.ini"
echo -n "Turn on httpOnly flag for session cookies(recommended)? [Y/n]: "
read answer
if [ "$answer" != 'n' ] && [ "$answer" != 'N' ]; then
install_log "Php-cgi enabling session.cookie_httponly."
sudo sed -i -E 's/^session\.cookie_httponly\s*=\s*(0|([O|o]ff)|([F|f]alse)|([N|n]o))\s*$/session.cookie_httponly = 1/' "$phpcgiconf"
fi
if [ "$php_package" = "php7.0-cgi" ]; then
echo -n "Turn on php opcache? [Y/n]: "
read answer
if [ "$answer" != 'n' ] && [ "$answer" != 'N' ]; then
install_log "Php-cgi enabling opcache.enable."
sudo sed -i -E 's/^;?opcache\.enable\s*=\s*(0|([O|o]ff)|([F|f]alse)|([N|n]o))\s*$/opcache.enable = 1/' "$phpcgiconf"
# Make sure opcache extension is turned on.
if [ -f "/usr/sbin/phpenmod" ]; then
sudo phpenmod opcache
else
install_warning "phpenmod not found."
fi
fi
fi
# Apply new php configuration.
sudo service lighttpd reload
}
function install_complete() {
install_log "Installation completed!"
echo -n "The system needs to be rebooted as a final step. Reboot now? [y/N]: "
read answer
if [[ $answer != "y" ]]; then
echo "Installation reboot aborted."
exit 0
fi
sudo shutdown -r now || install_error "Unable to execute shutdown"
}
function install_raspap() {
display_welcome
config_installation
update_system_packages
install_dependencies
enable_php_lighttpd
create_raspap_directories
check_for_old_configs
download_latest_files
change_file_ownership
create_logging_scripts
move_config_file
default_configuration
patch_system_files
reconfigure_php
install_complete
}