frodovdr/raspap-webgui
1
0
Fork 0
mirror of https://github.com/billz/raspap-webgui.git synced 2023-10-10 13:37:24 +02:00
Code Issues Releases Wiki Activity

Updated FAQs (markdown)

Bill Zimmerman 2020-05-23 13:45:48 +02:00
parent e313f5bc27
commit 5fa311a844
1 changed files with 4 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
FAQs.md

@ -11,6 +11,7 @@ This has been written to address some frequently asked questions among users of
* [Can I configure RaspAP to work with a captive portal?](#captive) * [Can I configure RaspAP to work with a captive portal?](#captive)
* [Why can't I access wireless mode 'N' (802.11n)?](#wireless-mode) * [Why can't I access wireless mode 'N' (802.11n)?](#wireless-mode)
* [How do I prepare the SD card to connect to WiFi in headless mode?](#headless-mode) * [How do I prepare the SD card to connect to WiFi in headless mode?](#headless-mode)
* [Managed mode AP doesn't work on the Pi Zero W. Help!](#pizero-w)
* [Can I use wlan0 and wlan1 rather than eth0 for my AP?](#interfaces) * [Can I use wlan0 and wlan1 rather than eth0 for my AP?](#interfaces)
* [Can I use RaspAP as a monitor only, without changing my configuration?](#monitor) * [Can I use RaspAP as a monitor only, without changing my configuration?](#monitor)
* [WiFi scanning doesn't work or I get the error `cannot execute "wpa_cli reconfigure"`. Help!](#scanning) * [WiFi scanning doesn't work or I get the error `cannot execute "wpa_cli reconfigure"`. Help!](#scanning)
@ -137,6 +138,9 @@ network={
} }
``` ```
## <a name="#pizero-w"></a>Managed mode AP doesn't work on the Pi Zero W. Help!
See [this walkthrough](https://github.com/billz/raspap-webgui/wiki/RPi-Zero-W-AP-STA-mode) where the installation is described in detail.
## <a name="interfaces"></a>Can I use wlan0 and wlan1 rather than eth0 for my AP? ## <a name="interfaces"></a>Can I use wlan0 and wlan1 rather than eth0 for my AP?
The short answer is yes. In this scenario, you may wish to use the built-in `wlan0` interface as the AP with a USB `wlan1` connection as the client, rather than wired ethernet (`eth0`). This is partly supported by RaspAP, although you will need to make two small updates. The short answer is yes. In this scenario, you may wish to use the built-in `wlan0` interface as the AP with a USB `wlan1` connection as the client, rather than wired ethernet (`eth0`). This is partly supported by RaspAP, although you will need to make two small updates.