From b18fe0049c6fb2ee12b456a1dcf8755cc390206e Mon Sep 17 00:00:00 2001 From: Bill Zimmerman Date: Fri, 18 Oct 2019 17:15:14 +0200 Subject: [PATCH] Updated FAQs (markdown) --- FAQs.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/FAQs.md b/FAQs.md index 787de13..06805d7 100644 --- a/FAQs.md +++ b/FAQs.md @@ -73,7 +73,7 @@ sudo systemctl disable raspap.service ``` ### How do I integrate RaspAP with Pi-hole? -[Pi-hole®](https://github.com/pi-hole/pi-hole) is a popular RPi-based project that blocks ads network-wide by creating a DNS sinkhole. There have been several discussions around integrating RaspAP with Pi-hole, with the end goal of hosting a complete AP and ad-blocker on a single device. This is possible with a few modifications, essentially giving permission to Pi-Hole to manage `dnsmasq` leases. +[Pi-hole®](https://github.com/pi-hole/pi-hole) is a popular RPi-based project that blocks ads network-wide by creating a DNS sinkhole. There have been several discussions around integrating RaspAP with Pi-hole, with the end goal of hosting a complete AP and ad-blocker on a single device. This is possible with a few modifications, essentially giving Pi-hole permission to manage `dnsmasq` leases. Follow these steps in the order below: @@ -192,7 +192,7 @@ sudo systemctl restart hostapd.service **Important:** Take note that it's possible to overwrite your manual changes to `dhcpcd.conf` with RaspAP's [default configuration](https://github.com/billz/raspap-webgui/tree/master/config), depending on which functions you use in the UI. -Also, be aware that external WiFi adapters (ie, USB "dongles") vary greatly in terms of hardware capabilities and driver support. Many are of poor quality and not worth the trouble. Please [read this](https://github.com/billz/raspap-webgui/wiki/Reporting-issues) before reporting a bug. +Also, be aware that external WiFi adapters (ie, USB "dongles") vary greatly in terms of hardware capabilities and driver support. Many do not work out of the box on the RPi, require a powered USB hub, manual driver and/or firmware installation or are otherwise [not well suited for the RPi](https://elinux.org/RPi_USB_Wi-Fi_Adapters). Please [read this](https://github.com/billz/raspap-webgui/wiki/Reporting-issues) before reporting a bug. ### Can I use RaspAP as a monitor only, without changing my configuration? Yes, RaspAP has support for a so-called "monitor mode". In `config.php` change the setting `RASPI_MONITOR_ENABLED` to `true`. This disables the ability to modify settings, start/stop daemons, shutdown or reboot the RPi. RaspAP will continue to report interface statistics, service settings and data usage as normal.