1
0
mirror of https://github.com/billz/raspap-webgui.git synced 2023-10-10 13:37:24 +02:00

Updated Captive portal setup (markdown)

Bill Zimmerman 2020-05-18 08:56:13 +02:00
parent 0067e779a9
commit cdc8f4333f

@ -1,5 +1,7 @@
The [nodogsplash project](https://github.com/nodogsplash/nodogsplash) is a lightweight, highly configurable captive portal solution. It integrates nicely with RaspAP and is recommended over other methods. No configuration changes are needed with RaspAP, however you will need to modify some default settings in the nodogsplash config. This step-by-step guide assumes you have already installed RaspAP, either with the [Quick Installer](https://github.com/billz/raspap-webgui/wiki/Quick-Installer-usage) or [manual setup instructions](https://github.com/billz/raspap-webgui/wiki/Manual-installation).
> :information_source: **Note:** This walkthrough is provided as a courtesy only; it does not imply support for DNS or any integration with this project.
1. Begin by updating your RPi with the latest package information:
```
sudo apt-get update