mirror of
https://github.com/billz/raspap-webgui.git
synced 2023-10-10 13:37:24 +02:00
Updated Manual installation (markdown)
Bill Zimmerman
parent
d595df6574
commit
f0d39d2b24
@ -4,199 +4,3 @@ This wiki page has been sunsetted in favor of [RaspAP Docs](https://docs.raspap.
|
||||
|
||||
___
|
||||
|
||||
These steps apply to the latest release of Raspbian (currently [Buster](https://www.raspberrypi.org/downloads/raspbian/)), Debian and Armbian. Notes for previous versions, Ubuntu Server 18.04 TLS and 19.10 are provided, where applicable. Please refer to [this](https://github.com/billz/raspap-webgui#supported-operating-systems) regarding operating systems support.
|
||||
|
||||
Start off by following the [project prerequisites](https://github.com/billz/raspap-webgui#prerequisites), updating your kernel, firmware and packages to their latest versions:
|
||||
|
||||
```
|
||||
sudo apt-get update
|
||||
sudo apt-get dist-upgrade
|
||||
sudo reboot
|
||||
```
|
||||
|
||||
On Ubuntu Server, add a dependency and the `ppa:ondrej/php` apt package.
|
||||
|
||||
```
|
||||
sudo apt-get install software-properties-common
|
||||
sudo add-apt-repository ppa:ondrej/php
|
||||
```
|
||||
|
||||
On Debian, Armbian and Ubuntu, install `dhcpcd5`. **Note:** skip this step if using Raspbian.
|
||||
|
||||
```
|
||||
sudo apt-get install dhcpcd5
|
||||
```
|
||||
|
||||
Install git, lighttpd, php7, hostapd, dnsmasq and some extra packages. **Note:** for Ubuntu, you may replace `php7.3-cgi` with `php7.4-cgi`. For Raspbian Stretch, replace `php7.3-cgi` with `php7.0-cgi`. php5 is no longer supported.
|
||||
|
||||
```
|
||||
sudo apt-get install lighttpd git hostapd dnsmasq iptables-persistent vnstat qrencode php7.3-cgi
|
||||
```
|
||||
|
||||
Enable PHP for lighttpd and restart it for the settings to take effect.
|
||||
```
|
||||
sudo lighttpd-enable-mod fastcgi-php
|
||||
sudo service lighttpd force-reload
|
||||
sudo systemctl restart lighttpd.service
|
||||
```
|
||||
|
||||
Prepare the web destination and git clone the files to `/var/www/html`.
|
||||
```
|
||||
sudo rm -rf /var/www/html
|
||||
sudo git clone https://github.com/billz/raspap-webgui /var/www/html
|
||||
```
|
||||
|
||||
Now comes the fun part. For security reasons, the `www-data` user which lighttpd runs under is not allowed to start or stop daemons, or run commands like ifdown and ifup, all of which we want RaspAP to do. So we will add the `www-data` user to sudoers, but with restrictions on what commands the user can run. Copy the sudoers rules to their destination:
|
||||
|
||||
```
|
||||
cd /var/www/html
|
||||
sudo cp installers/raspap.sudoers /etc/sudoers.d/090_raspap
|
||||
```
|
||||
|
||||
Create the RaspAP configuration directories. Add `/etc/dhcpcd.conf` as a base config:
|
||||
|
||||
```
|
||||
sudo mkdir /etc/raspap/
|
||||
sudo mkdir /etc/raspap/backups
|
||||
sudo mkdir /etc/raspap/networking
|
||||
sudo mkdir /etc/raspap/hostapd
|
||||
sudo mkdir /etc/raspap/lighttpd
|
||||
cat /etc/dhcpcd.conf | sudo tee -a /etc/raspap/networking/defaults > /dev/null
|
||||
```
|
||||
|
||||
Move RaspAP's auth control file to the correct location.
|
||||
|
||||
```
|
||||
sudo cp raspap.php /etc/raspap
|
||||
```
|
||||
|
||||
Set the files ownership to `www-data` user for the web files and RaspAP config.
|
||||
|
||||
```
|
||||
sudo chown -R www-data:www-data /var/www/html
|
||||
sudo chown -R www-data:www-data /etc/raspap
|
||||
```
|
||||
|
||||
Move the hostapd logging and service control shell scripts to the correct location.
|
||||
|
||||
```
|
||||
sudo mv installers/*log.sh /etc/raspap/hostapd
|
||||
sudo mv installers/service*.sh /etc/raspap/hostapd
|
||||
```
|
||||
|
||||
Set ownership and permissions for the logging and service control scripts.
|
||||
|
||||
```
|
||||
sudo chown -c root:www-data /etc/raspap/hostapd/*.sh
|
||||
sudo chmod 750 /etc/raspap/hostapd/*.sh
|
||||
```
|
||||
|
||||
Copy and set ownership of the lighttpd control scripts.
|
||||
```
|
||||
sudo cp installers/configport.sh /etc/raspap/lighttpd
|
||||
sudo chown -c root:www-data /etc/raspap/lighttpd/*.sh
|
||||
```
|
||||
|
||||
Move the raspapd daemon to the correct location and enable it.
|
||||
|
||||
```
|
||||
sudo mv installers/raspapd.service /lib/systemd/system
|
||||
sudo systemctl daemon-reload
|
||||
sudo systemctl enable raspapd.service
|
||||
```
|
||||
|
||||
Copy the configuration files for dhcpcd, dnsmasq, and hostapd. Optionally, backup your existing hostapd.conf.
|
||||
|
||||
```
|
||||
sudo mv /etc/default/hostapd ~/default_hostapd.old
|
||||
sudo cp /etc/hostapd/hostapd.conf ~/hostapd.conf.old
|
||||
sudo cp config/default_hostapd /etc/default/hostapd
|
||||
sudo cp config/hostapd.conf /etc/hostapd/hostapd.conf
|
||||
sudo cp config/dnsmasq.conf /etc/dnsmasq.d/090_raspap.conf
|
||||
sudo cp config/dhcpcd.conf /etc/dhcpcd.conf
|
||||
sudo cp config/config.php /var/www/html/includes/
|
||||
```
|
||||
|
||||
Disable `systemd-networkd` and copy the bridge configuration.
|
||||
|
||||
```
|
||||
sudo systemctl stop systemd-networkd
|
||||
sudo systemctl disable systemd-networkd
|
||||
sudo cp config/raspap-bridge-br0.netdev /etc/systemd/network/raspap-bridge-br0.netdev
|
||||
sudo cp config/raspap-br0-member-eth0.network /etc/systemd/network/raspap-br0-member-eth0.network
|
||||
```
|
||||
|
||||
(Optional) Optimize PHP, replacing `php7.3-cgi` with your installed version.
|
||||
|
||||
```
|
||||
sudo sed -i -E 's/^session\.cookie_httponly\s*=\s*(0|([O|o]ff)|([F|f]alse)|([N|n]o))\s*$/session.cookie_httponly = 1/' /etc/php/7.3/cgi/php.ini
|
||||
sudo sed -i -E 's/^;?opcache\.enable\s*=\s*(0|([O|o]ff)|([F|f]alse)|([N|n]o))\s*$/opcache.enable = 1/' /etc/php/7.3/cgi/php.ini
|
||||
sudo phpenmod opcache
|
||||
```
|
||||
|
||||
Enable IP forwarding.
|
||||
|
||||
```
|
||||
echo "net.ipv4.ip_forward=1" | sudo tee /etc/sysctl.d/90_raspap.conf > /dev/null
|
||||
sudo sysctl -p /etc/sysctl.d/90_raspap.conf
|
||||
sudo /etc/init.d/procps restart
|
||||
```
|
||||
|
||||
Create iptables NAT rules and persist them.
|
||||
|
||||
```
|
||||
sudo iptables -t nat -A POSTROUTING -j MASQUERADE
|
||||
sudo iptables -t nat -A POSTROUTING -s 192.168.50.0/24 ! -d 192.168.50.0/24 -j MASQUERADE
|
||||
sudo iptables-save | sudo tee /etc/iptables/rules.v4
|
||||
```
|
||||
|
||||
Unmask and enable hostapd.service.
|
||||
|
||||
```
|
||||
sudo systemctl unmask hostapd.service
|
||||
sudo systemctl enable hostapd.service
|
||||
```
|
||||
|
||||
(Optional) Install OpenVPN, enabling the option in RaspAP's config and enable the openvpn-client service.
|
||||
|
||||
```
|
||||
sudo apt-get install openvpn
|
||||
sudo sed -i "s/\('RASPI_OPENVPN_ENABLED', \)false/\1true/g" /var/www/html/includes/config.php
|
||||
sudo systemctl enable openvpn-client@client
|
||||
```
|
||||
|
||||
(Optional) Create OpenVPN auth control scripts, set ownership and permissions.
|
||||
|
||||
```
|
||||
sudo mkdir /etc/raspap/openvpn/
|
||||
sudo cp installers/configauth.sh /etc/raspap/openvpn/
|
||||
sudo chown -c root:www-data /etc/raspap/openvpn/*.sh
|
||||
sudo chmod 750 /etc/raspap/openvpn/*.sh
|
||||
```
|
||||
|
||||
(Optional) Install Ad blocking, enabling the option in RaspAP's config.
|
||||
|
||||
```
|
||||
sudo mkdir /etc/raspap/adblock
|
||||
wget https://raw.githubusercontent.com/notracking/hosts-blocklists/master/hostnames.txt -O /tmp/hostnames.txt
|
||||
wget https://raw.githubusercontent.com/notracking/hosts-blocklists/master/domains.txt -O /tmp/domains.txt
|
||||
sudo cp /tmp/hostnames.txt /etc/raspap/adblock
|
||||
sudo cp /tmp/domains.txt /etc/raspap/adblock
|
||||
sudo cp installers/update_blocklist.sh /etc/raspap/adblock/
|
||||
sudo chown -c root:www-data /etc/raspap/adblock/*.*
|
||||
sudo chmod 750 /etc/raspap/adblock/*.sh
|
||||
sudo touch /etc/dnsmasq.d/090_adblock.conf
|
||||
echo "conf-file=/etc/raspap/adblock/domains.txt" | sudo tee -a /etc/dnsmasq.d/090_adblock.conf > /dev/null
|
||||
echo "addn-hosts=/etc/raspap/adblock/hostnames.txt" | sudo tee -a /etc/dnsmasq.d/090_adblock.conf > /dev/null
|
||||
sudo sed -i '/dhcp-option=6/d' /etc/dnsmasq.d/090_raspap.conf
|
||||
sudo sed -i "s/\('RASPI_ADBLOCK_ENABLED', \)false/\1true/g" includes/config.php
|
||||
```
|
||||
|
||||
Reboot and it should be up and running.
|
||||
|
||||
```
|
||||
sudo reboot
|
||||
```
|
||||
|
||||
The default username is 'admin' and the default password is 'secret'.
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user