diff --git a/FAQs.md b/FAQs.md
index 0c4545b..3cd409d 100644
--- a/FAQs.md
+++ b/FAQs.md
@@ -6,6 +6,7 @@ This has been written to address some frequently encountered issues among users
* [RaspAP control panel works but there is no WiFi after reboot](#nowifi)
* [AP is not visible or can't connect to SSID with the Pi Zero](#pizero)
* [How do I integrate RaspAP with Pi-hole?](#pihole)
+* [Can I configure RaspAP to work with a captive portal?](#captive)
### My custom rc.local/networking configuration/wpa configuration is gone!
Currently, RaspAP generates a few of its own files so that it starts with a known configuration. Your custom configurations haven't been lost however, they've been moved to the backups directory in `/etc/raspap/backups`.
@@ -77,3 +78,54 @@ Follow these steps in the order below:
([source](https://discourse.pi-hole.net/t/raspap-pihole/14739/7))
+### Can I configure RaspAP to work with a captive portal?
+Yes, the [nodogsplash project](https://github.com/nodogsplash/nodogsplash) works just fine with RaspAP and is recommended over other methods. No configuration changes are needed with raspap-webgui, however you will need to modify some default settings in the nodogsplash config.
+
+The nodogsplash `GatewayInterface` should be set to the interface RaspAP runs on (`wlan0` is used by the Quick Installer). You will also need to change the `GateWayAddress` to `10.3.141.1`.
+
+` sudo vim /etc/nodogsplash/nodogsplash.conf`
+
+```# Parameter: GatewayInterface
+# Default: NONE
+#
+# GatewayInterface is not autodetected, has no default, and must be set here.
+# Set GatewayInterface to the interface on your router
+# that is to be managed by Nodogsplash.
+# Typically br-lan for the wired and wireless lan.
+#
+GatewayInterface wlan0
+```
+
+```
+# Parameter: GatewayAddress
+# Default: Discovered from GatewayInterface
+#
+# This should be autodetected on an OpenWRT system, but if not:
+# Set GatewayAddress to the IP address of the router on
+# the GatewayInterface. This is the address that the Nodogsplash
+# server listens on.
+#
+GatewayAddress 10.3.141.1
+```
+
+Give the nodogsplash service a kick:
+
+`sudo systemctl restart nodogsplash`
+
+...and verify that the service is running:
+
+`sudo systemctl status nodogsplash`
+
+```● nodogsplash.service - NoDogSplash Captive Portal
+ Loaded: loaded (/lib/systemd/system/nodogsplash.service; enabled; vendor preset: enabled)
+ Active: active (running) since Sat 2019-03-02 07:55:11 UTC; 11min ago
+ Process: 3404 ExecStart=/usr/bin/nodogsplash -d 5 $OPTIONS (code=exited, status=0/SUCCESS)
+ Main PID: 3405 (nodogsplash)
+ CGroup: /system.slice/nodogsplash.service
+ └─3405 /usr/bin/nodogsplash -d 5
+```
+
+Point your browser to http://10.3.141.1 and you should see the default nodogsplash page.
+
+
+