raspberrymatic-addon-rmupdate/addon/firmware_update_script

#/bin/sh

DISK="/dev/mmcblk0"
BOOT_SIZE=268435456
ROOT_SIZE=1073741824


echo "Deleting update_script.<br />" 1>&2
mount -o remount,rw /userfs
rm -f "$0"
mount -o remount,ro /userfs

echo "Checking for rootfs2 on $DISK.<br />" 1>&2

function start_sshd() {
	echo "Starting ssh daemon.<br />" 1>&2
	mount -o remount,rw /bootfs
	echo -n "rmupdate" > /bootfs/recoveryfs-sshpwd
	mount -o remount,ro /bootfs
	/etc/init.d/S50sshd start
}

if blkid ${DISK}p3 | grep 'LABEL="rootfs2"' 1>/dev/null 2>/dev/null; then
	echo "Rootfs2 found.<br />" 1>&2
	
	start_sshd
	
	cp /bootfs/VERSION /tmp/bootfs.VERSION
	umount /bootfs
	umount /rootfs
	
	echo "Current partition table:<br />" 1>&2
	parted $DISK unit B print | sed ':a;N;$!ba;s#\n#<br />#g' 1>&2
	
	boot_start=$(parted $DISK unit B print | grep '^ 1' | sed -n 's/ [1-4] *\([0-9]*\)B  *\([0-9]*\)B.*/\1/p')
	user_start=$(parted $DISK unit B print | grep '^ 4' | sed -n 's/ [1-4] *\([0-9]*\)B  *\([0-9]*\)B.*/\1/p')
	user_end=$(parted $DISK unit B print | grep '^ 4' | sed -n 's/ [1-4] *\([0-9]*\)B  *\([0-9]*\)B.*/\2/p')
	
	boot_end=$(($boot_start+$BOOT_SIZE-1))
	root_start=$(($boot_end+1))
	root_end=$(($root_start+$ROOT_SIZE-1))
	
	boot_start_s=$((${boot_start}/512))
	boot_size_s=$(((${boot_end}-${boot_start}+1)/512))
	root_start_s=$((${root_start}/512))
	root_size_s=$(((${root_end}-${root_start}+1)/512))
	user_start_s=$((${user_start}/512))
	user_size_s=$(((${user_end}-${user_start}+1)/512))
	
	echo "Calculated new partition layout:<br />" 1>&2
	echo " bootfs: $boot_start ($boot_start_s) - $boot_end - $boot_size_s<br />" 1>&2
	echo " rootfs: $root_start ($root_start_s) - $root_end - $root_size_s<br />" 1>&2
	echo " userfs: $user_start ($user_start_s) - $user_end - $user_size_s<br />" 1>&2
	
	echo "Writing new partition table to disk.<br />" 1>&2
	# parted will refuse to write partition table because partitions are mounted
	#parted --script $DISK \
	#	mklabel msdos \
	#	mkpart primary fat32 ${boot_start}B ${boot_end}B \
	#	set 1 boot on \
	#	mkpart primary ext4 ${root_start}B ${root_end}B \
	#	mkpart primary ext4 ${user_start}B ${user_end}B
	
	{
		echo "$boot_start_s,$boot_size_s,0x0C,*"
		echo "$root_start_s,$root_size_s,0x83"
		echo "$user_start_s,$user_size_s,0x83"
		,0
	} | sfdisk --no-reread --force --wipe=always --label=dos $DISK 2>&1 | sed ':a;N;$!ba;s#\n#<br />#g' 1>&2
	
	# Use dd to write label id
	printf "\xde\xed\xbe\xef" | dd of=$DISK bs=1 count=4 seek=440
	
	#echo "New partition table:<br />" 1>&2
	#parted $DISK unit B print | sed ':a;N;$!ba;s#\n#<br />#g' 1>&2
	
	partprobe
	
	# RaspberryMatic will check for label rootfs and VERSION file
	mkfs.ext4 -L rootfs ${DISK}p2
	mount ${DISK}p2 /rootfs
	cp /tmp/bootfs.VERSION /rootfs/VERSION
	umount /rootfs
fi

echo "Running fwinstall.sh (again).<br />" 1>&2
rm -f /tmp/.runningFirmwareUpdate
fwinstall.sh