satip-axe/kernel/drivers/net/phy/phy_device.c

1155 lines
28 KiB
C
Raw Normal View History

/*
* drivers/net/phy/phy_device.c
*
* Framework for finding and configuring PHYs.
* Also contains generic PHY driver
*
* Author: Andy Fleming
*
* Copyright (c) 2004 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/phy.h>
#include <linux/mdio.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
MODULE_DESCRIPTION("PHY library");
MODULE_AUTHOR("Andy Fleming");
MODULE_LICENSE("GPL");
void phy_device_free(struct phy_device *phydev)
{
kfree(phydev);
}
EXPORT_SYMBOL(phy_device_free);
static void phy_device_release(struct device *dev)
{
phy_device_free(to_phy_device(dev));
}
static struct phy_driver genphy_driver;
extern int mdio_bus_init(void);
extern void mdio_bus_exit(void);
static LIST_HEAD(phy_fixup_list);
static DEFINE_MUTEX(phy_fixup_lock);
/*
* Creates a new phy_fixup and adds it to the list
* @bus_id: A string which matches phydev->dev.bus_id (or PHY_ANY_ID)
* @phy_uid: Used to match against phydev->phy_id (the UID of the PHY)
* It can also be PHY_ANY_UID
* @phy_uid_mask: Applied to phydev->phy_id and fixup->phy_uid before
* comparison
* @run: The actual code to be run when a matching PHY is found
*/
int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
int (*run)(struct phy_device *))
{
struct phy_fixup *fixup;
fixup = kzalloc(sizeof(struct phy_fixup), GFP_KERNEL);
if (!fixup)
return -ENOMEM;
strlcpy(fixup->bus_id, bus_id, sizeof(fixup->bus_id));
fixup->phy_uid = phy_uid;
fixup->phy_uid_mask = phy_uid_mask;
fixup->run = run;
mutex_lock(&phy_fixup_lock);
list_add_tail(&fixup->list, &phy_fixup_list);
mutex_unlock(&phy_fixup_lock);
return 0;
}
EXPORT_SYMBOL(phy_register_fixup);
/* Registers a fixup to be run on any PHY with the UID in phy_uid */
int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
int (*run)(struct phy_device *))
{
return phy_register_fixup(PHY_ANY_ID, phy_uid, phy_uid_mask, run);
}
EXPORT_SYMBOL(phy_register_fixup_for_uid);
/* Registers a fixup to be run on the PHY with id string bus_id */
int phy_register_fixup_for_id(const char *bus_id,
int (*run)(struct phy_device *))
{
return phy_register_fixup(bus_id, PHY_ANY_UID, 0xffffffff, run);
}
EXPORT_SYMBOL(phy_register_fixup_for_id);
/*
* Returns 1 if fixup matches phydev in bus_id and phy_uid.
* Fixups can be set to match any in one or more fields.
*/
static int phy_needs_fixup(struct phy_device *phydev, struct phy_fixup *fixup)
{
if (strcmp(fixup->bus_id, dev_name(&phydev->dev)) != 0)
if (strcmp(fixup->bus_id, PHY_ANY_ID) != 0)
return 0;
if ((fixup->phy_uid & fixup->phy_uid_mask) !=
(phydev->phy_id & fixup->phy_uid_mask))
if (fixup->phy_uid != PHY_ANY_UID)
return 0;
return 1;
}
/* Runs any matching fixups for this phydev */
int phy_scan_fixups(struct phy_device *phydev)
{
struct phy_fixup *fixup;
mutex_lock(&phy_fixup_lock);
list_for_each_entry(fixup, &phy_fixup_list, list) {
if (phy_needs_fixup(phydev, fixup)) {
int err;
err = fixup->run(phydev);
if (err < 0) {
mutex_unlock(&phy_fixup_lock);
return err;
}
}
}
mutex_unlock(&phy_fixup_lock);
return 0;
}
EXPORT_SYMBOL(phy_scan_fixups);
struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
{
struct phy_device *dev;
/* We allocate the device, and initialize the
* default values */
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (NULL == dev)
return (struct phy_device*) PTR_ERR((void*)-ENOMEM);
dev->dev.release = phy_device_release;
dev->speed = 0;
dev->duplex = -1;
dev->pause = dev->asym_pause = 0;
dev->link = 1;
dev->interface = PHY_INTERFACE_MODE_GMII;
dev->autoneg = AUTONEG_ENABLE;
dev->addr = addr;
dev->phy_id = phy_id;
dev->bus = bus;
dev->dev.parent = bus->parent;
dev->dev.bus = &mdio_bus_type;
dev->irq = bus->irq != NULL ? bus->irq[addr] : PHY_POLL;
dev_set_name(&dev->dev, PHY_ID_FMT, bus->id, addr);
dev->state = PHY_DOWN;
mutex_init(&dev->lock);
return dev;
}
EXPORT_SYMBOL(phy_device_create);
/**
* get_phy_id - reads the specified addr for its ID.
* @bus: the target MII bus
* @addr: PHY address on the MII bus
* @phy_id: where to store the ID retrieved.
*
* Description: Reads the ID registers of the PHY at @addr on the
* @bus, stores it in @phy_id and returns zero on success.
*/
int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id)
{
int phy_reg;
/* Grab the bits from PHYIR1, and put them
* in the upper half */
phy_reg = bus->read(bus, addr, MII_PHYSID1);
if (phy_reg < 0)
return -EIO;
*phy_id = (phy_reg & 0xffff) << 16;
/* Grab the bits from PHYIR2, and put them in the lower half */
phy_reg = bus->read(bus, addr, MII_PHYSID2);
if (phy_reg < 0)
return -EIO;
*phy_id |= (phy_reg & 0xffff);
return 0;
}
EXPORT_SYMBOL(get_phy_id);
/**
* get_phy_device - reads the specified PHY device and returns its @phy_device struct
* @bus: the target MII bus
* @addr: PHY address on the MII bus
*
* Description: Reads the ID registers of the PHY at @addr on the
* @bus, then allocates and returns the phy_device to represent it.
*/
struct phy_device * get_phy_device(struct mii_bus *bus, int addr)
{
struct phy_device *dev = NULL;
u32 phy_id;
int r;
r = get_phy_id(bus, addr, &phy_id);
if (r)
return ERR_PTR(r);
/* If the phy_id is mostly Fs, there is no device there */
if ((phy_id & 0x1fffffff) == 0x1fffffff)
return NULL;
dev = phy_device_create(bus, addr, phy_id);
return dev;
}
EXPORT_SYMBOL(get_phy_device);
/**
* phy_device_register - Register the phy device on the MDIO bus
* @phydev: phy_device structure to be added to the MDIO bus
*/
int phy_device_register(struct phy_device *phydev)
{
int err;
/* Don't register a phy if one is already registered at this
* address */
if (phydev->bus->phy_map[phydev->addr])
return -EINVAL;
phydev->bus->phy_map[phydev->addr] = phydev;
/* Run all of the fixups for this PHY */
phy_scan_fixups(phydev);
err = device_register(&phydev->dev);
if (err) {
pr_err("phy %d failed to register\n", phydev->addr);
goto out;
}
return 0;
out:
phydev->bus->phy_map[phydev->addr] = NULL;
return err;
}
EXPORT_SYMBOL(phy_device_register);
/**
* phy_prepare_link - prepares the PHY layer to monitor link status
* @phydev: target phy_device struct
* @handler: callback function for link status change notifications
*
* Description: Tells the PHY infrastructure to handle the
* gory details on monitoring link status (whether through
* polling or an interrupt), and to call back to the
* connected device driver when the link status changes.
* If you want to monitor your own link state, don't call
* this function.
*/
void phy_prepare_link(struct phy_device *phydev,
void (*handler)(struct net_device *))
{
phydev->adjust_link = handler;
}
/**
* phy_connect_direct - connect an ethernet device to a specific phy_device
* @dev: the network device to connect
* @phydev: the pointer to the phy device
* @handler: callback function for state change notifications
* @flags: PHY device's dev_flags
* @interface: PHY device's interface
*/
int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
void (*handler)(struct net_device *), u32 flags,
phy_interface_t interface)
{
int rc;
rc = phy_attach_direct(dev, phydev, flags, interface);
if (rc)
return rc;
phy_prepare_link(phydev, handler);
phy_start_machine(phydev, NULL);
if (phydev->irq > 0)
phy_start_interrupts(phydev);
return 0;
}
EXPORT_SYMBOL(phy_connect_direct);
/**
* phy_connect - connect an ethernet device to a PHY device
* @dev: the network device to connect
* @bus_id: the id string of the PHY device to connect
* @handler: callback function for state change notifications
* @flags: PHY device's dev_flags
* @interface: PHY device's interface
*
* Description: Convenience function for connecting ethernet
* devices to PHY devices. The default behavior is for
* the PHY infrastructure to handle everything, and only notify
* the connected driver when the link status changes. If you
* don't want, or can't use the provided functionality, you may
* choose to call only the subset of functions which provide
* the desired functionality.
*/
struct phy_device * phy_connect(struct net_device *dev, const char *bus_id,
void (*handler)(struct net_device *), u32 flags,
phy_interface_t interface)
{
struct phy_device *phydev;
struct device *d;
int rc;
/* Search the list of PHY devices on the mdio bus for the
* PHY with the requested name */
d = bus_find_device_by_name(&mdio_bus_type, NULL, bus_id);
if (!d) {
pr_err("PHY %s not found\n", bus_id);
return ERR_PTR(-ENODEV);
}
phydev = to_phy_device(d);
rc = phy_connect_direct(dev, phydev, handler, flags, interface);
if (rc)
return ERR_PTR(rc);
return phydev;
}
EXPORT_SYMBOL(phy_connect);
/**
* phy_disconnect - disable interrupts, stop state machine, and detach a PHY device
* @phydev: target phy_device struct
*/
void phy_disconnect(struct phy_device *phydev)
{
if (phydev->irq > 0)
phy_stop_interrupts(phydev);
phy_stop_machine(phydev);
phydev->adjust_link = NULL;
phy_detach(phydev);
}
EXPORT_SYMBOL(phy_disconnect);
/**
* phy_attach_direct - attach a network device to a given PHY device pointer
* @dev: network device to attach
* @phydev: Pointer to phy_device to attach
* @flags: PHY device's dev_flags
* @interface: PHY device's interface
*
* Description: Called by drivers to attach to a particular PHY
* device. The phy_device is found, and properly hooked up
* to the phy_driver. If no driver is attached, then the
* genphy_driver is used. The phy_device is given a ptr to
* the attaching device, and given a callback for link status
* change. The phy_device is returned to the attaching driver.
*/
int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
u32 flags, phy_interface_t interface)
{
struct device *d = &phydev->dev;
/* Assume that if there is no driver, that it doesn't
* exist, and we should use the genphy driver. */
if (NULL == d->driver) {
int err;
d->driver = &genphy_driver.driver;
err = d->driver->probe(d);
if (err >= 0)
err = device_bind_driver(d);
if (err)
return err;
}
if (phydev->attached_dev) {
dev_err(&dev->dev, "PHY already attached\n");
return -EBUSY;
}
phydev->attached_dev = dev;
phydev->dev_flags = flags;
phydev->interface = interface;
/* Do initial configuration here, now that
* we have certain key parameters
* (dev_flags and interface) */
if (phydev->drv->config_init) {
int err;
err = phy_scan_fixups(phydev);
if (err < 0)
return err;
err = phydev->drv->config_init(phydev);
if (err < 0)
return err;
}
return 0;
}
EXPORT_SYMBOL(phy_attach_direct);
/**
* phy_attach - attach a network device to a particular PHY device
* @dev: network device to attach
* @bus_id: Bus ID of PHY device to attach
* @flags: PHY device's dev_flags
* @interface: PHY device's interface
*
* Description: Same as phy_attach_direct() except that a PHY bus_id
* string is passed instead of a pointer to a struct phy_device.
*/
struct phy_device *phy_attach(struct net_device *dev,
const char *bus_id, u32 flags, phy_interface_t interface)
{
struct bus_type *bus = &mdio_bus_type;
struct phy_device *phydev;
struct device *d;
int rc;
/* Search the list of PHY devices on the mdio bus for the
* PHY with the requested name */
d = bus_find_device_by_name(bus, NULL, bus_id);
if (!d) {
pr_err("PHY %s not found\n", bus_id);
return ERR_PTR(-ENODEV);
}
phydev = to_phy_device(d);
rc = phy_attach_direct(dev, phydev, flags, interface);
if (rc)
return ERR_PTR(rc);
return phydev;
}
EXPORT_SYMBOL(phy_attach);
/**
* phy_detach - detach a PHY device from its network device
* @phydev: target phy_device struct
*/
void phy_detach(struct phy_device *phydev)
{
phydev->attached_dev = NULL;
/* If the device had no specific driver before (i.e. - it
* was using the generic driver), we unbind the device
* from the generic driver so that there's a chance a
* real driver could be loaded */
if (phydev->dev.driver == &genphy_driver.driver)
device_release_driver(&phydev->dev);
}
EXPORT_SYMBOL(phy_detach);
/* Generic PHY support and helper functions */
/**
* genphy_config_advert - sanitize and advertise auto-negotation parameters
* @phydev: target phy_device struct
*
* Description: Writes MII_ADVERTISE with the appropriate values,
* after sanitizing the values to make sure we only advertise
* what is supported. Returns < 0 on error, 0 if the PHY's advertisement
* hasn't changed, and > 0 if it has changed.
*/
int genphy_config_advert(struct phy_device *phydev)
{
u32 advertise;
int oldadv, adv;
int err, changed = 0;
/* Only allow advertising what
* this PHY supports */
phydev->advertising &= phydev->supported;
advertise = phydev->advertising;
/* Setup standard advertisement */
oldadv = adv = phy_read(phydev, MII_ADVERTISE);
if (adv < 0)
return adv;
adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP |
ADVERTISE_PAUSE_ASYM);
if (advertise & ADVERTISED_10baseT_Half)
adv |= ADVERTISE_10HALF;
if (advertise & ADVERTISED_10baseT_Full)
adv |= ADVERTISE_10FULL;
if (advertise & ADVERTISED_100baseT_Half)
adv |= ADVERTISE_100HALF;
if (advertise & ADVERTISED_100baseT_Full)
adv |= ADVERTISE_100FULL;
if (advertise & ADVERTISED_Pause)
adv |= ADVERTISE_PAUSE_CAP;
if (advertise & ADVERTISED_Asym_Pause)
adv |= ADVERTISE_PAUSE_ASYM;
if (adv != oldadv) {
err = phy_write(phydev, MII_ADVERTISE, adv);
if (err < 0)
return err;
changed = 1;
}
/* Configure gigabit if it's supported */
if (phydev->supported & (SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full)) {
oldadv = adv = phy_read(phydev, MII_CTRL1000);
if (adv < 0)
return adv;
adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
if (advertise & SUPPORTED_1000baseT_Half)
adv |= ADVERTISE_1000HALF;
if (advertise & SUPPORTED_1000baseT_Full)
adv |= ADVERTISE_1000FULL;
if (adv != oldadv) {
err = phy_write(phydev, MII_CTRL1000, adv);
if (err < 0)
return err;
changed = 1;
}
}
return changed;
}
EXPORT_SYMBOL(genphy_config_advert);
/**
* genphy_setup_forced - configures/forces speed/duplex from @phydev
* @phydev: target phy_device struct
*
* Description: Configures MII_BMCR to force speed/duplex
* to the values in phydev. Assumes that the values are valid.
* Please see phy_sanitize_settings().
*/
int genphy_setup_forced(struct phy_device *phydev)
{
int err;
int ctl = 0;
phydev->pause = phydev->asym_pause = 0;
if (SPEED_1000 == phydev->speed)
ctl |= BMCR_SPEED1000;
else if (SPEED_100 == phydev->speed)
ctl |= BMCR_SPEED100;
if (DUPLEX_FULL == phydev->duplex)
ctl |= BMCR_FULLDPLX;
err = phy_write(phydev, MII_BMCR, ctl);
return err;
}
/**
* genphy_restart_aneg - Enable and Restart Autonegotiation
* @phydev: target phy_device struct
*/
int genphy_restart_aneg(struct phy_device *phydev)
{
int ctl;
ctl = phy_read(phydev, MII_BMCR);
if (ctl < 0)
return ctl;
ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
/* Don't isolate the PHY if we're negotiating */
ctl &= ~(BMCR_ISOLATE);
ctl = phy_write(phydev, MII_BMCR, ctl);
return ctl;
}
EXPORT_SYMBOL(genphy_restart_aneg);
/**
* genphy_config_aneg - restart auto-negotiation or write BMCR
* @phydev: target phy_device struct
*
* Description: If auto-negotiation is enabled, we configure the
* advertising, and then restart auto-negotiation. If it is not
* enabled, then we write the BMCR.
*/
int genphy_config_aneg(struct phy_device *phydev)
{
int result;
if (AUTONEG_ENABLE != phydev->autoneg)
return genphy_setup_forced(phydev);
result = genphy_config_advert(phydev);
if (result < 0) /* error */
return result;
if (result == 0) {
/* Advertisment hasn't changed, but maybe aneg was never on to
* begin with? Or maybe phy was isolated? */
int ctl = phy_read(phydev, MII_BMCR);
if (ctl < 0)
return ctl;
if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE))
result = 1; /* do restart aneg */
}
/* Only restart aneg if we are advertising something different
* than we were before. */
if (result > 0)
result = genphy_restart_aneg(phydev);
return result;
}
EXPORT_SYMBOL(genphy_config_aneg);
/**
* genphy_update_link - update link status in @phydev
* @phydev: target phy_device struct
*
* Description: Update the value in phydev->link to reflect the
* current link value. In order to do this, we need to read
* the status register twice, keeping the second value.
*/
int genphy_update_link(struct phy_device *phydev)
{
int status;
/* Do a fake read */
status = phy_read(phydev, MII_BMSR);
if (status < 0)
return status;
/* Read link and autonegotiation status */
status = phy_read(phydev, MII_BMSR);
if (status < 0)
return status;
if ((status & BMSR_LSTATUS) == 0)
phydev->link = 0;
else
phydev->link = 1;
return 0;
}
EXPORT_SYMBOL(genphy_update_link);
/**
* genphy_read_status - check the link status and update current link state
* @phydev: target phy_device struct
*
* Description: Check the link, then figure out the current state
* by comparing what we advertise with what the link partner
* advertises. Start by checking the gigabit possibilities,
* then move on to 10/100.
*/
int genphy_read_status(struct phy_device *phydev)
{
int adv;
int err;
int lpa;
int lpagb = 0;
/* Update the link, but return if there
* was an error */
err = genphy_update_link(phydev);
if (err)
return err;
if (AUTONEG_ENABLE == phydev->autoneg) {
if (phydev->supported & (SUPPORTED_1000baseT_Half
| SUPPORTED_1000baseT_Full)) {
lpagb = phy_read(phydev, MII_STAT1000);
if (lpagb < 0)
return lpagb;
adv = phy_read(phydev, MII_CTRL1000);
if (adv < 0)
return adv;
lpagb &= adv << 2;
}
lpa = phy_read(phydev, MII_LPA);
if (lpa < 0)
return lpa;
adv = phy_read(phydev, MII_ADVERTISE);
if (adv < 0)
return adv;
lpa &= adv;
phydev->speed = SPEED_10;
phydev->duplex = DUPLEX_HALF;
phydev->pause = phydev->asym_pause = 0;
if (lpagb & (LPA_1000FULL | LPA_1000HALF)) {
phydev->speed = SPEED_1000;
if (lpagb & LPA_1000FULL)
phydev->duplex = DUPLEX_FULL;
} else if (lpa & (LPA_100FULL | LPA_100HALF)) {
phydev->speed = SPEED_100;
if (lpa & LPA_100FULL)
phydev->duplex = DUPLEX_FULL;
} else
if (lpa & LPA_10FULL)
phydev->duplex = DUPLEX_FULL;
if (phydev->duplex == DUPLEX_FULL){
phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
}
} else {
int bmcr = phy_read(phydev, MII_BMCR);
if (bmcr < 0)
return bmcr;
if (bmcr & BMCR_FULLDPLX)
phydev->duplex = DUPLEX_FULL;
else
phydev->duplex = DUPLEX_HALF;
if (bmcr & BMCR_SPEED1000)
phydev->speed = SPEED_1000;
else if (bmcr & BMCR_SPEED100)
phydev->speed = SPEED_100;
else
phydev->speed = SPEED_10;
phydev->pause = phydev->asym_pause = 0;
}
return 0;
}
EXPORT_SYMBOL(genphy_read_status);
static int genphy_config_init(struct phy_device *phydev)
{
int val;
u32 features;
/* For now, I'll claim that the generic driver supports
* all possible port types */
features = (SUPPORTED_TP | SUPPORTED_MII
| SUPPORTED_AUI | SUPPORTED_FIBRE |
SUPPORTED_BNC);
/* Do we support autonegotiation? */
val = phy_read(phydev, MII_BMSR);
if (val < 0)
return val;
if (val & BMSR_ANEGCAPABLE)
features |= SUPPORTED_Autoneg;
if (val & BMSR_100FULL)
features |= SUPPORTED_100baseT_Full;
if (val & BMSR_100HALF)
features |= SUPPORTED_100baseT_Half;
if (val & BMSR_10FULL)
features |= SUPPORTED_10baseT_Full;
if (val & BMSR_10HALF)
features |= SUPPORTED_10baseT_Half;
if (val & BMSR_ESTATEN) {
val = phy_read(phydev, MII_ESTATUS);
if (val < 0)
return val;
if (val & ESTATUS_1000_TFULL)
features |= SUPPORTED_1000baseT_Full;
if (val & ESTATUS_1000_THALF)
features |= SUPPORTED_1000baseT_Half;
}
phydev->supported = features;
phydev->advertising = features;
return 0;
}
int genphy_suspend(struct phy_device *phydev)
{
int value;
mutex_lock(&phydev->lock);
value = phy_read(phydev, MII_BMCR);
phy_write(phydev, MII_BMCR, (value | BMCR_PDOWN));
mutex_unlock(&phydev->lock);
return 0;
}
EXPORT_SYMBOL(genphy_suspend);
int genphy_resume(struct phy_device *phydev)
{
int value;
mutex_lock(&phydev->lock);
value = phy_read(phydev, MII_BMCR);
phy_write(phydev, MII_BMCR, (value & ~BMCR_PDOWN));
mutex_unlock(&phydev->lock);
return 0;
}
EXPORT_SYMBOL(genphy_resume);
static inline void mmd_phy_cl45(struct mii_bus *bus, int prtad, int devad,
int addr)
{
/* Write the desired MMD Devad */
bus->write(bus, addr, MII_MMD_CRTL, devad);
/* Write the desired MMD register address */
bus->write(bus, addr, MII_MMD_DATA, prtad);
/* Select the Function : DATA with no post increment */
bus->write(bus, addr, MII_MMD_CRTL,
(devad | MII_MMD_CTRL_FUNC_DATA_NOINCR));
}
/**
* read_phy_mmd - reads data from the MMD register (clause 22 to access to
* clause 45)
* @bus: the target MII bus
* @prtad: MMD Address
* @devad: MMD DEVAD
* @addr: PHY address on the MII bus
*
* Description: Reads data from the MMD regisetrs of the
* phy addr. To read these register we have:
* 1) Write reg 13 // DEVAD
* 2) Write reg 14 // MMD Address
* 3) Write reg 13 // MMD Data Command for MMD DEVAD
* 3) Read reg 14 // Read MMD data
*/
static int read_phy_mmd(struct mii_bus *bus, int prtad, int devad, int addr)
{
u32 ret;
mmd_phy_cl45(bus, prtad, devad, addr);
/* Read the content of the MMD's selected register */
ret = bus->read(bus, addr, MII_MMD_DATA);
if (ret < 0)
return -EIO;
return ret;
}
/**
* write_phy_mmd - writes data to the MMD register (clause 22 to access to
* clause 45)
* @bus: the target MII bus
* @prtad: MMD Address
* @devad: MMD DEVAD
* @addr: PHY address on the MII bus
* @data: data to write in the MMD register
*
* Description: write data from the MMD regisetrs of the
* phy addr. To read these register we have:
* 1) Write reg 13 // DEVAD
* 2) Write reg 14 // MMD Address
* 3) Write reg 13 // MMD Data Command for MMD DEVAD
* 3) Write reg 14 // Write MMD data
*/
static void write_phy_mmd(struct mii_bus *bus, int prtad, int devad, int addr,
u32 data)
{
mmd_phy_cl45(bus, prtad, devad, addr);
/* Write the data into MMD's selected register */
bus->write(bus, addr, MII_MMD_DATA, data);
}
/* phy_check_eee
* @dev: device to probe and init
*
* Description: check if the Energy-Efficient Ethernet (EEE)
* is supported by looking at the MMD registers 3.20 and 3.60/61
*/
int phy_check_eee(struct phy_device *phydev)
{
int ret = -EPROTONOSUPPORT;
/* According to 802.3az,the EEE is supported only in full duplex-mode.
* Also EEE feature is active when core is operating with MII, GMII
* or RGMII */
if ((phydev->duplex == DUPLEX_FULL) &&
((phydev->interface == PHY_INTERFACE_MODE_MII) ||
(phydev->interface == PHY_INTERFACE_MODE_GMII) ||
(phydev->interface == PHY_INTERFACE_MODE_RGMII))) {
int eee_cap, eee_link;
/* EEE ability must be supported in both local and remote
* PHY devices. */
eee_cap = read_phy_mmd(phydev->bus, MDIO_EEE_PART_LINK,
MDIO_MMD_AN, phydev->addr);
if (eee_cap < 0)
return eee_cap;
eee_link = read_phy_mmd(phydev->bus, MDIO_EEE_CAP,
MDIO_MMD_PCS, phydev->addr);
if (eee_link < 0)
return eee_link;
if (eee_cap && eee_link) {
/* Configure the PHY to stop receiving xMII clock
* while it is signaling LPI */
int pcs_ctrl = read_phy_mmd(phydev->bus, MDIO_CTRL1,
MDIO_MMD_PCS,
phydev->addr);
if (pcs_ctrl < 0)
return pcs_ctrl;
pcs_ctrl |= MDIO_PCS_CLK_STOP_ENABLE;
write_phy_mmd(phydev->bus, MDIO_CTRL1, MDIO_MMD_PCS,
phydev->addr, pcs_ctrl);
ret = 0; /* EEE supported */
}
}
return ret;
}
EXPORT_SYMBOL(phy_get_eee_err);
/* phy_get_eee_err
* @dev: device to probe and init
*
* Description: it is to report the number of time where the PHY
* failed to complete its normal wake sequence.
*/
int phy_get_eee_err(struct phy_device *phydev)
{
return read_phy_mmd(phydev->bus, MDIO_EEE_WK_ERR, MDIO_MMD_PCS,
phydev->addr);
}
EXPORT_SYMBOL(phy_check_eee);
/**
* phy_probe - probe and init a PHY device
* @dev: device to probe and init
*
* Description: Take care of setting up the phy_device structure,
* set the state to READY (the driver's init function should
* set it to STARTING if needed).
*/
static int phy_probe(struct device *dev)
{
struct phy_device *phydev;
struct phy_driver *phydrv;
struct device_driver *drv;
int err = 0;
phydev = to_phy_device(dev);
/* Make sure the driver is held.
* XXX -- Is this correct? */
drv = get_driver(phydev->dev.driver);
phydrv = to_phy_driver(drv);
phydev->drv = phydrv;
/* Disable the interrupt if the PHY doesn't support it */
if (!(phydrv->flags & PHY_HAS_INTERRUPT))
phydev->irq = PHY_POLL;
else {
/* Check if the PHY is WoL capable but driver cannot work
* in polling mode.
*/
if (phydrv->wol_supported)
device_set_wakeup_capable(dev, 1);
}
mutex_lock(&phydev->lock);
/* Start out supporting everything. Eventually,
* a controller will attach, and may modify one
* or both of these values */
phydev->supported = phydrv->features;
phydev->advertising = phydrv->features;
/* Set the state to READY by default */
phydev->state = PHY_READY;
if (phydev->drv->probe)
err = phydev->drv->probe(phydev);
mutex_unlock(&phydev->lock);
return err;
}
static int phy_remove(struct device *dev)
{
struct phy_device *phydev;
phydev = to_phy_device(dev);
mutex_lock(&phydev->lock);
phydev->state = PHY_DOWN;
mutex_unlock(&phydev->lock);
if (phydev->drv->remove)
phydev->drv->remove(phydev);
put_driver(dev->driver);
phydev->drv = NULL;
return 0;
}
/**
* phy_driver_register - register a phy_driver with the PHY layer
* @new_driver: new phy_driver to register
*/
int phy_driver_register(struct phy_driver *new_driver)
{
int retval;
new_driver->driver.name = new_driver->name;
new_driver->driver.bus = &mdio_bus_type;
new_driver->driver.probe = phy_probe;
new_driver->driver.remove = phy_remove;
retval = driver_register(&new_driver->driver);
if (retval) {
printk(KERN_ERR "%s: Error %d in registering driver\n",
new_driver->name, retval);
return retval;
}
pr_debug("%s: Registered new driver\n", new_driver->name);
return 0;
}
EXPORT_SYMBOL(phy_driver_register);
void phy_driver_unregister(struct phy_driver *drv)
{
driver_unregister(&drv->driver);
}
EXPORT_SYMBOL(phy_driver_unregister);
static struct phy_driver genphy_driver = {
.phy_id = 0xffffffff,
.phy_id_mask = 0xffffffff,
.name = "Generic PHY",
.config_init = genphy_config_init,
.features = 0,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.suspend = genphy_suspend,
.resume = genphy_resume,
.driver = {.owner= THIS_MODULE, },
};
static int __init phy_init(void)
{
int rc;
rc = mdio_bus_init();
if (rc)
return rc;
rc = phy_driver_register(&genphy_driver);
if (rc)
mdio_bus_exit();
return rc;
}
static void __exit phy_exit(void)
{
phy_driver_unregister(&genphy_driver);
mdio_bus_exit();
}
subsys_initcall(phy_init);
module_exit(phy_exit);