satip-axe/kernel/drivers/stm/clocks/clock-regs-stx5197.h

79 lines
2.2 KiB
C
Raw Normal View History

/*****************************************************************************
*
* File name : clock-regs-stx5197.h
* Description : Low Level API - Base addresses & register definitions.
*
* COPYRIGHT (C) 2009 STMicroelectronics - All Rights Reserved
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*
*****************************************************************************/
#ifndef __CLOCK_LLA_REGS_H
#define __CLOCK_LLA_REGS_H
/* Base addresses */
#define SYSCFG_BASE_ADDRESS 0xFDC00000
#define SYS_SERVICE_ADDR 0xFDC00000
/* Register offsets */
#define DCO_MODE_CFG 0x170
#define FSA_SETUP 0x010
#define FSB_SETUP 0x050
#define FS_DEFAULT_SETUP 0x010
#define FS_ANALOG_POFF (1 << 3)
#define FS_NOT_RESET (1 << 4)
#define FS_DIGITAL_PON(id) (1 << ((id) + 8))
/* Spare clock is recovered in 5197 */
/*
* the CLK_FS_SETUP(...) manages the:
* - CLK_SPARE @ 0x014
* - CLK_PCM @ 0x020
* - CLK_SPDIF @ 0x030
* - CLK_DSS @ 0x040
* - CLK_PIX @ 0x054
* - CLK_FDM @ 0x060
* - CLK_AUX @ 0x070
* - CLK_USB @ 0x080
*/
#define CLK_FS_SETUP(x) (0x10 * ((x) + 1) + (((x) % 4) == 0 ? 4 : 0))
#define FS_PROG_EN (1 << 5)
#define FS_SEL_OUT (1 << 9)
#define FS_OUT_ENABLED (1 << 11)
#define CAPTURE_COUNTER_PCM 0x168
#define MODE_CONTROL 0x110
#define MODE_CTRL_NULL 0x0
#define MODE_CTRL_X1 0x1
#define MODE_CTRL_PROG 0x2
#define MODE_CTRL_STDB 0x3
#define CLK_LOCK_CFG 0x300
#define CLK_OBS_CFG 0x188
#define FORCE_CFG 0x184
#define PLL_SELECT_CFG 0x180
/*
* PLL_CONFIG
* - Bank as [0, 1] to say A or B
* - Num as [0, 1] to sat 0 or 1
*/
#define PLL_CONFIG(bank, num) (bank * 8 + num * 4)
#define CLKDIV0_CONFIG0 0x090
#define CLKDIV1_CONFIG0 0x0A0
#define CLKDIV2_CONFIG0 0x0AC
#define CLKDIV3_CONFIG0 0x0B8
#define CLKDIV4_CONFIG0 0x0C4
#define CLKDIV6_CONFIG0 0x0D0
#define CLKDIV7_CONFIG0 0x0DC
#define CLKDIV8_CONFIG0 0x0E8
#define CLKDIV9_CONFIG0 0x0F4
#define CLKDIV10_CONFIG0 0x100
#define DYNAMIC_PWR_CONFIG 0x128
#define LOW_PWR_CTRL 0x118
#define LOW_PWR_CTRL1 0x11C
#endif /* End __CLOCK_LLA_REGS_H */