satip-axe/kernel/arch/sh/boards/mach-iptv7105/setup.c

293 lines
8.3 KiB
C
Raw Normal View History

/*
* arch/sh/boards/mach-iptv7105/setup.c
*
* Copyright (C) 2008 STMicroelectronics Limited
* Author: Stuart Menefy (stuart.menefy@st.com)
*
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*
* STMicroelectronics IPTV PLUGGIN board support.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/phy.h>
#include <linux/leds.h>
#include <linux/gpio.h>
#include <linux/stm/platform.h>
#include <linux/stm/stx7105.h>
#include <linux/stm/nand.h>
#include <linux/stm/pci-glue.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <asm/irq-ilc.h>
#define IPTV7105_PIO_PHY_RESET stm_gpio(15, 5)
#define IPTV7105_PIO_PCI_IDSEL stm_gpio(10, 2)
#define IPTV7105_PIO_PCI_SERR stm_gpio(15, 4)
#define IPTV7105_PIO_PCI_RESET stm_gpio(15, 7)
#define IPTV7105_PIO_FLASH_VPP stm_gpio(6, 5)
#define IPTV7105_PIO_SPI_BOOT_CLK stm_gpio(15, 0)
#define IPTV7105_PIO_SPI_BOOT_DOUT stm_gpio(15, 1)
#define IPTV7105_PIO_SPI_BOOT_NOTCS stm_gpio(15, 2)
#define IPTV7105_PIO_SPI_BOOT_DIN stm_gpio(15, 3)
static void __init iptv7105_setup(char **cmdline_p)
{
printk(KERN_INFO "STMicroelectronics STx7105 IPTV board initialisation\n");
stx7105_early_device_init();
/* CN5, which is usually connected to CN6 on the debug board and
* eventually becomes female DB9 socket CN8 there... */
stx7105_configure_asc(0, &(struct stx7105_asc_config) {
.routing.asc2 = stx7105_asc2_pio4,
.hw_flow_control = 1,
.is_console = 1, });
/* CN17, which is usually connected to CN18 on the debug board and
* eventually becomes female DB9 socket CN7 there... */
stx7105_configure_asc(3, &(struct stx7105_asc_config) {
.hw_flow_control = 1,
.is_console = 0, });
/* CN4 */
stx7105_configure_asc(2, &(struct stx7105_asc_config) {
.hw_flow_control = 1,
.is_console = 0, });
}
static int iptv7105_phy_reset(void *bus)
{
gpio_set_value(IPTV7105_PIO_PHY_RESET, 0);
udelay(100);
gpio_set_value(IPTV7105_PIO_PHY_RESET, 1);
udelay(1);
return 1;
}
static struct stmmac_mdio_bus_data stmmac_mdio_bus = {
.bus_id = 0,
.phy_reset = iptv7105_phy_reset,
.phy_mask = 0,
};
/* Serial Flash */
static struct spi_board_info iptv7105_serial_flash = {
.modalias = "m25p80",
.bus_num = 0,
.chip_select = stm_gpio(2, 4),
.max_speed_hz = 7000000,
.mode = SPI_MODE_3,
.platform_data = &(struct flash_platform_data) {
.name = "m25p80",
.type = "m25p32",
.nr_parts = 2,
.parts = (struct mtd_partition []) {
{
.name = "Serial Flash 1",
.size = 0x00080000,
.offset = 0,
}, {
.name = "Serial Flash 2",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_NXTBLK,
},
},
},
};
/* NAND Flash */
struct stm_nand_bank_data iptv7105_nand_flash = {
.csn = 0,
.options = NAND_NO_AUTOINCR | NAND_USE_FLASH_BBT,
.nr_partitions = 2,
.partitions = (struct mtd_partition []) {
{
.name = "NAND Flash 1",
.offset = 0,
.size = 0x00800000
}, {
.name = "NAND Flash 2",
.offset = MTDPART_OFS_NXTBLK,
.size = MTDPART_SIZ_FULL
},
},
.timing_data = &(struct stm_nand_timing_data) {
.sig_setup = 50, /* times in ns */
.sig_hold = 50,
.CE_deassert = 0,
.WE_to_RBn = 100,
.wr_on = 10,
.wr_off = 40,
.rd_on = 10,
.rd_off = 40,
.chip_delay = 30, /* in us */
},
};
static struct platform_device *iptv7105_devices[] __initdata = {
};
/* PCI configuration */
static struct stm_plat_pci_config iptv7105_pci_config = {
.pci_irq = {
[0] = PCI_PIN_DEFAULT,
[1] = PCI_PIN_DEFAULT,
[2] = PCI_PIN_UNUSED,
[3] = PCI_PIN_UNUSED
},
.serr_irq = PCI_PIN_UNUSED,
.idsel_lo = 30,
.idsel_hi = 30,
.req_gnt = {
[0] = PCI_PIN_DEFAULT,
[1] = PCI_PIN_UNUSED,
[2] = PCI_PIN_UNUSED,
[3] = PCI_PIN_UNUSED
},
.pci_clk = 33333333,
.pci_reset_gpio = IPTV7105_PIO_PCI_RESET,
};
int pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
/* We can use the standard function on this board */
return stx7105_pcibios_map_platform_irq(&iptv7105_pci_config, pin);
}
static int __init iptv7105_devices_init(void)
{
/* The IDSEL line is connected to PIO10.2 only... Luckily
* there is just one slot, so we can just force 1... */
if (gpio_request(IPTV7105_PIO_PCI_IDSEL, "PCI_IDSEL") == 0)
gpio_direction_output(IPTV7105_PIO_PCI_IDSEL, 1);
else
printk(KERN_ERR "iptv7105: Failed to claim PCI_IDSEL PIO!\n");
/* Setup the PCI_SERR# PIO */
if (gpio_request(IPTV7105_PIO_PCI_SERR, "PCI_SERR#") == 0) {
gpio_direction_input(IPTV7105_PIO_PCI_SERR);
iptv7105_pci_config.serr_irq =
gpio_to_irq(IPTV7105_PIO_PCI_SERR);
set_irq_type(iptv7105_pci_config.serr_irq, IRQ_TYPE_LEVEL_LOW);
} else {
printk(KERN_ERR "iptv7105: Failed to claim PCI SERR PIO!\n");
}
/* And finally! */
stx7105_configure_pci(&iptv7105_pci_config);
stx7105_configure_sata(0);
/* Set SPI Boot pads as inputs to avoid contention with SSC1 */
if (gpio_request(IPTV7105_PIO_SPI_BOOT_CLK, "SPI Boot CLK") == 0)
gpio_direction_input(IPTV7105_PIO_SPI_BOOT_CLK);
else
printk(KERN_ERR "iptv7105: Failed to claim SPI Boot CLK!\n");
if (gpio_request(IPTV7105_PIO_SPI_BOOT_DOUT, "SPI Boot DOUT") == 0)
gpio_direction_input(IPTV7105_PIO_SPI_BOOT_DOUT);
else
printk(KERN_ERR "iptv7105: Failed to claim SPI Boot DOUT!\n");
if (gpio_request(IPTV7105_PIO_SPI_BOOT_NOTCS, "SPI Boot NOTCS") == 0)
gpio_direction_input(IPTV7105_PIO_SPI_BOOT_NOTCS);
else
printk(KERN_ERR "iptv7105: Failed to claim SPI Boot NOTCS!\n");
if (gpio_request(IPTV7105_PIO_SPI_BOOT_DIN, "SPI Boot DIN") == 0)
gpio_direction_input(IPTV7105_PIO_SPI_BOOT_DIN);
else
printk(KERN_ERR "iptv7105: Failed to claim SPI Boot DIN!\n");
/* Serial Flash SPI bus */
stx7105_configure_ssc_spi(1, &(struct stx7105_ssc_config) {
.routing.ssc1.sclk = stx7105_ssc1_sclk_pio2_5,
.routing.ssc1.mtsr = stx7105_ssc1_mtsr_pio2_6,
.routing.ssc1.mrst = stx7105_ssc1_mrst_pio2_7, });
stx7105_configure_ssc_i2c(2, &(struct stx7105_ssc_config) {
.routing.ssc2.sclk = stx7105_ssc2_sclk_pio3_4,
.routing.ssc2.mtsr = stx7105_ssc2_mtsr_pio3_5, });
stx7105_configure_ssc_i2c(3, &(struct stx7105_ssc_config) {
.routing.ssc3.sclk = stx7105_ssc3_sclk_pio3_6,
.routing.ssc3.mtsr = stx7105_ssc3_mtsr_pio3_7, });
stx7105_configure_usb(0, &(struct stx7105_usb_config) {
.ovrcur_mode = stx7105_usb_ovrcur_active_low,
.pwr_enabled = 1,
.routing.usb0.ovrcur = stx7105_usb0_ovrcur_pio4_4,
.routing.usb0.pwr = stx7105_usb0_pwr_pio4_5, });
stx7105_configure_usb(1, &(struct stx7105_usb_config) {
.ovrcur_mode = stx7105_usb_ovrcur_active_low,
.pwr_enabled = 1,
.routing.usb1.ovrcur = stx7105_usb1_ovrcur_pio4_6,
.routing.usb1.pwr = stx7105_usb1_pwr_pio4_7, });
gpio_request(IPTV7105_PIO_PHY_RESET, "eth_phy_reset");
gpio_direction_output(IPTV7105_PIO_PHY_RESET, 1);
stx7105_configure_ethernet(0, &(struct stx7105_ethernet_config) {
.mode = stx7105_ethernet_mode_mii,
.ext_clk = 0,
.phy_bus = 0,
.phy_addr = -1,
.mdio_bus_data = &stmmac_mdio_bus,
});
stx7105_configure_lirc(&(struct stx7105_lirc_config) {
.rx_mode = stx7105_lirc_rx_mode_ir,
.tx_enabled = 1,
.tx_od_enabled = 1, });
stx7105_configure_audio(&(struct stx7105_audio_config) {
.pcm_player_0_output =
stx7105_pcm_player_0_output_2_channels,
});
/* just permanetly enable the flash*/
gpio_request(IPTV7105_PIO_FLASH_VPP, "eth_phy_reset");
gpio_direction_output(IPTV7105_PIO_FLASH_VPP, 1);
stx7105_configure_nand(&(struct stm_nand_config) {
.driver = stm_nand_flex,
.nr_banks = 1,
.banks = &iptv7105_nand_flash,
.rbn.flex_connected = 1,});
spi_register_board_info(&iptv7105_serial_flash, 1);
return platform_add_devices(iptv7105_devices,
ARRAY_SIZE(iptv7105_devices));
}
arch_initcall(iptv7105_devices_init);
static void __iomem *iptv7105_ioport_map(unsigned long port,
unsigned int size)
{
/*
* If we have PCI then this should never be called because we
* are using the generic iomap implementation. If we don't
* have PCI then there are no IO mapped devices, so it still
* shouldn't be called.
*/
BUG();
return (void __iomem *)CCN_PVR;
}
struct sh_machine_vector mv_iptv7105 __initmv = {
.mv_name = "iptv7105",
.mv_setup = iptv7105_setup,
.mv_nr_irqs = NR_IRQS,
.mv_ioport_map = iptv7105_ioport_map,
STM_PCI_IO_MACHINE_VEC
};