satip-axe/kernel/arch/arm/mach-sa1100/shannon.c

93 lines
1.9 KiB
C
Raw Normal View History

/*
* linux/arch/arm/mach-sa1100/shannon.c
*/
#include <linux/init.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/tty.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
#include <mach/mcp.h>
#include <mach/shannon.h>
#include "generic.h"
static struct mtd_partition shannon_partitions[] = {
{
.name = "BLOB boot loader",
.offset = 0,
.size = 0x20000
},
{
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = 0xe0000
},
{
.name = "initrd",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL
}
};
static struct flash_platform_data shannon_flash_data = {
.map_name = "cfi_probe",
.parts = shannon_partitions,
.nr_parts = ARRAY_SIZE(shannon_partitions),
};
static struct resource shannon_flash_resource = {
.start = SA1100_CS0_PHYS,
.end = SA1100_CS0_PHYS + SZ_4M - 1,
.flags = IORESOURCE_MEM,
};
static struct mcp_plat_data shannon_mcp_data = {
.mccr0 = MCCR0_ADM,
.sclk_rate = 11981000,
};
static void __init shannon_init(void)
{
sa11x0_set_flash_data(&shannon_flash_data, &shannon_flash_resource, 1);
sa11x0_set_mcp_data(&shannon_mcp_data);
}
static void __init shannon_map_io(void)
{
sa1100_map_io();
sa1100_register_uart(0, 3);
sa1100_register_uart(1, 1);
Ser1SDCR0 |= SDCR0_SUS;
GAFR |= (GPIO_UART_TXD | GPIO_UART_RXD);
GPDR |= GPIO_UART_TXD | SHANNON_GPIO_CODEC_RESET;
GPDR &= ~GPIO_UART_RXD;
PPAR |= PPAR_UPR;
/* reset the codec */
GPCR = SHANNON_GPIO_CODEC_RESET;
GPSR = SHANNON_GPIO_CODEC_RESET;
}
MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)")
.phys_io = 0x80000000,
.io_pg_offst = ((0xf8000000) >> 18) & 0xfffc,
.boot_params = 0xc0000100,
.map_io = shannon_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = shannon_init,
MACHINE_END