satip-axe/kernel/arch/mips/alchemy/common/irq.c

630 lines
20 KiB
C
Raw Normal View History

/*
* Copyright 2001, 2007-2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. <source@mvista.com>
*
* Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/bitops.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
#include <asm/mach-au1x00/au1000.h>
#ifdef CONFIG_MIPS_PB1000
#include <asm/mach-pb1x00/pb1000.h>
#endif
static int au1x_ic_settype(unsigned int irq, unsigned int flow_type);
/* per-processor fixed function irqs */
struct au1xxx_irqmap au1xxx_ic0_map[] __initdata = {
#if defined(CONFIG_SOC_AU1000)
{ AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
#elif defined(CONFIG_SOC_AU1500)
{ AU1500_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1000_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1500_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1000_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1500_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1500_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
#elif defined(CONFIG_SOC_AU1100)
{ AU1100_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1100_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1100_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
#elif defined(CONFIG_SOC_AU1550)
{ AU1550_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1550_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1550_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1550_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1550_CRYPTO_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1550_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1550_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1550_PCI_RST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1550_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1550_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1550_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1550_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1550_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1550_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1550_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1550_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1550_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1550_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
#elif defined(CONFIG_SOC_AU1200)
{ AU1200_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1200_SWT_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1200_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1200_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1200_MAE_BE_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1200_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1200_MAE_FE_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1200_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1200_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1200_AES_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1200_CAMERA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1200_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1200_USB_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1200_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1200_MAE_BOTH_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
#else
#error "Error: Unknown Alchemy SOC"
#endif
};
#ifdef CONFIG_PM
/*
* Save/restore the interrupt controller state.
* Called from the save/restore core registers as part of the
* au_sleep function in power.c.....maybe I should just pm_register()
* them instead?
*/
static unsigned int sleep_intctl_config0[2];
static unsigned int sleep_intctl_config1[2];
static unsigned int sleep_intctl_config2[2];
static unsigned int sleep_intctl_src[2];
static unsigned int sleep_intctl_assign[2];
static unsigned int sleep_intctl_wake[2];
static unsigned int sleep_intctl_mask[2];
void save_au1xxx_intctl(void)
{
sleep_intctl_config0[0] = au_readl(IC0_CFG0RD);
sleep_intctl_config1[0] = au_readl(IC0_CFG1RD);
sleep_intctl_config2[0] = au_readl(IC0_CFG2RD);
sleep_intctl_src[0] = au_readl(IC0_SRCRD);
sleep_intctl_assign[0] = au_readl(IC0_ASSIGNRD);
sleep_intctl_wake[0] = au_readl(IC0_WAKERD);
sleep_intctl_mask[0] = au_readl(IC0_MASKRD);
sleep_intctl_config0[1] = au_readl(IC1_CFG0RD);
sleep_intctl_config1[1] = au_readl(IC1_CFG1RD);
sleep_intctl_config2[1] = au_readl(IC1_CFG2RD);
sleep_intctl_src[1] = au_readl(IC1_SRCRD);
sleep_intctl_assign[1] = au_readl(IC1_ASSIGNRD);
sleep_intctl_wake[1] = au_readl(IC1_WAKERD);
sleep_intctl_mask[1] = au_readl(IC1_MASKRD);
}
/*
* For most restore operations, we clear the entire register and
* then set the bits we found during the save.
*/
void restore_au1xxx_intctl(void)
{
au_writel(0xffffffff, IC0_MASKCLR); au_sync();
au_writel(0xffffffff, IC0_CFG0CLR); au_sync();
au_writel(sleep_intctl_config0[0], IC0_CFG0SET); au_sync();
au_writel(0xffffffff, IC0_CFG1CLR); au_sync();
au_writel(sleep_intctl_config1[0], IC0_CFG1SET); au_sync();
au_writel(0xffffffff, IC0_CFG2CLR); au_sync();
au_writel(sleep_intctl_config2[0], IC0_CFG2SET); au_sync();
au_writel(0xffffffff, IC0_SRCCLR); au_sync();
au_writel(sleep_intctl_src[0], IC0_SRCSET); au_sync();
au_writel(0xffffffff, IC0_ASSIGNCLR); au_sync();
au_writel(sleep_intctl_assign[0], IC0_ASSIGNSET); au_sync();
au_writel(0xffffffff, IC0_WAKECLR); au_sync();
au_writel(sleep_intctl_wake[0], IC0_WAKESET); au_sync();
au_writel(0xffffffff, IC0_RISINGCLR); au_sync();
au_writel(0xffffffff, IC0_FALLINGCLR); au_sync();
au_writel(0x00000000, IC0_TESTBIT); au_sync();
au_writel(0xffffffff, IC1_MASKCLR); au_sync();
au_writel(0xffffffff, IC1_CFG0CLR); au_sync();
au_writel(sleep_intctl_config0[1], IC1_CFG0SET); au_sync();
au_writel(0xffffffff, IC1_CFG1CLR); au_sync();
au_writel(sleep_intctl_config1[1], IC1_CFG1SET); au_sync();
au_writel(0xffffffff, IC1_CFG2CLR); au_sync();
au_writel(sleep_intctl_config2[1], IC1_CFG2SET); au_sync();
au_writel(0xffffffff, IC1_SRCCLR); au_sync();
au_writel(sleep_intctl_src[1], IC1_SRCSET); au_sync();
au_writel(0xffffffff, IC1_ASSIGNCLR); au_sync();
au_writel(sleep_intctl_assign[1], IC1_ASSIGNSET); au_sync();
au_writel(0xffffffff, IC1_WAKECLR); au_sync();
au_writel(sleep_intctl_wake[1], IC1_WAKESET); au_sync();
au_writel(0xffffffff, IC1_RISINGCLR); au_sync();
au_writel(0xffffffff, IC1_FALLINGCLR); au_sync();
au_writel(0x00000000, IC1_TESTBIT); au_sync();
au_writel(sleep_intctl_mask[1], IC1_MASKSET); au_sync();
au_writel(sleep_intctl_mask[0], IC0_MASKSET); au_sync();
}
#endif /* CONFIG_PM */
static void au1x_ic0_unmask(unsigned int irq_nr)
{
unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE;
au_writel(1 << bit, IC0_MASKSET);
au_writel(1 << bit, IC0_WAKESET);
au_sync();
}
static void au1x_ic1_unmask(unsigned int irq_nr)
{
unsigned int bit = irq_nr - AU1000_INTC1_INT_BASE;
au_writel(1 << bit, IC1_MASKSET);
au_writel(1 << bit, IC1_WAKESET);
/* very hacky. does the pb1000 cpld auto-disable this int?
* nowhere in the current kernel sources is it disabled. --mlau
*/
#if defined(CONFIG_MIPS_PB1000)
if (irq_nr == AU1000_GPIO_15)
au_writel(0x4000, PB1000_MDR); /* enable int */
#endif
au_sync();
}
static void au1x_ic0_mask(unsigned int irq_nr)
{
unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE;
au_writel(1 << bit, IC0_MASKCLR);
au_writel(1 << bit, IC0_WAKECLR);
au_sync();
}
static void au1x_ic1_mask(unsigned int irq_nr)
{
unsigned int bit = irq_nr - AU1000_INTC1_INT_BASE;
au_writel(1 << bit, IC1_MASKCLR);
au_writel(1 << bit, IC1_WAKECLR);
au_sync();
}
static void au1x_ic0_ack(unsigned int irq_nr)
{
unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE;
/*
* This may assume that we don't get interrupts from
* both edges at once, or if we do, that we don't care.
*/
au_writel(1 << bit, IC0_FALLINGCLR);
au_writel(1 << bit, IC0_RISINGCLR);
au_sync();
}
static void au1x_ic1_ack(unsigned int irq_nr)
{
unsigned int bit = irq_nr - AU1000_INTC1_INT_BASE;
/*
* This may assume that we don't get interrupts from
* both edges at once, or if we do, that we don't care.
*/
au_writel(1 << bit, IC1_FALLINGCLR);
au_writel(1 << bit, IC1_RISINGCLR);
au_sync();
}
static void au1x_ic0_maskack(unsigned int irq_nr)
{
unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE;
au_writel(1 << bit, IC0_WAKECLR);
au_writel(1 << bit, IC0_MASKCLR);
au_writel(1 << bit, IC0_RISINGCLR);
au_writel(1 << bit, IC0_FALLINGCLR);
au_sync();
}
static void au1x_ic1_maskack(unsigned int irq_nr)
{
unsigned int bit = irq_nr - AU1000_INTC1_INT_BASE;
au_writel(1 << bit, IC1_WAKECLR);
au_writel(1 << bit, IC1_MASKCLR);
au_writel(1 << bit, IC1_RISINGCLR);
au_writel(1 << bit, IC1_FALLINGCLR);
au_sync();
}
static int au1x_ic1_setwake(unsigned int irq, unsigned int on)
{
unsigned int bit = irq - AU1000_INTC1_INT_BASE;
unsigned long wakemsk, flags;
/* only GPIO 0-7 can act as wakeup source: */
if ((irq < AU1000_GPIO_0) || (irq > AU1000_GPIO_7))
return -EINVAL;
local_irq_save(flags);
wakemsk = au_readl(SYS_WAKEMSK);
if (on)
wakemsk |= 1 << bit;
else
wakemsk &= ~(1 << bit);
au_writel(wakemsk, SYS_WAKEMSK);
au_sync();
local_irq_restore(flags);
return 0;
}
/*
* irq_chips for both ICs; this way the mask handlers can be
* as short as possible.
*/
static struct irq_chip au1x_ic0_chip = {
.name = "Alchemy-IC0",
.ack = au1x_ic0_ack,
.mask = au1x_ic0_mask,
.mask_ack = au1x_ic0_maskack,
.unmask = au1x_ic0_unmask,
.set_type = au1x_ic_settype,
};
static struct irq_chip au1x_ic1_chip = {
.name = "Alchemy-IC1",
.ack = au1x_ic1_ack,
.mask = au1x_ic1_mask,
.mask_ack = au1x_ic1_maskack,
.unmask = au1x_ic1_unmask,
.set_type = au1x_ic_settype,
.set_wake = au1x_ic1_setwake,
};
static int au1x_ic_settype(unsigned int irq, unsigned int flow_type)
{
struct irq_chip *chip;
unsigned long icr[6];
unsigned int bit, ic;
int ret;
if (irq >= AU1000_INTC1_INT_BASE) {
bit = irq - AU1000_INTC1_INT_BASE;
chip = &au1x_ic1_chip;
ic = 1;
} else {
bit = irq - AU1000_INTC0_INT_BASE;
chip = &au1x_ic0_chip;
ic = 0;
}
if (bit > 31)
return -EINVAL;
icr[0] = ic ? IC1_CFG0SET : IC0_CFG0SET;
icr[1] = ic ? IC1_CFG1SET : IC0_CFG1SET;
icr[2] = ic ? IC1_CFG2SET : IC0_CFG2SET;
icr[3] = ic ? IC1_CFG0CLR : IC0_CFG0CLR;
icr[4] = ic ? IC1_CFG1CLR : IC0_CFG1CLR;
icr[5] = ic ? IC1_CFG2CLR : IC0_CFG2CLR;
ret = 0;
switch (flow_type) { /* cfgregs 2:1:0 */
case IRQ_TYPE_EDGE_RISING: /* 0:0:1 */
au_writel(1 << bit, icr[5]);
au_writel(1 << bit, icr[4]);
au_writel(1 << bit, icr[0]);
set_irq_chip_and_handler_name(irq, chip,
handle_edge_irq, "riseedge");
break;
case IRQ_TYPE_EDGE_FALLING: /* 0:1:0 */
au_writel(1 << bit, icr[5]);
au_writel(1 << bit, icr[1]);
au_writel(1 << bit, icr[3]);
set_irq_chip_and_handler_name(irq, chip,
handle_edge_irq, "falledge");
break;
case IRQ_TYPE_EDGE_BOTH: /* 0:1:1 */
au_writel(1 << bit, icr[5]);
au_writel(1 << bit, icr[1]);
au_writel(1 << bit, icr[0]);
set_irq_chip_and_handler_name(irq, chip,
handle_edge_irq, "bothedge");
break;
case IRQ_TYPE_LEVEL_HIGH: /* 1:0:1 */
au_writel(1 << bit, icr[2]);
au_writel(1 << bit, icr[4]);
au_writel(1 << bit, icr[0]);
set_irq_chip_and_handler_name(irq, chip,
handle_level_irq, "hilevel");
break;
case IRQ_TYPE_LEVEL_LOW: /* 1:1:0 */
au_writel(1 << bit, icr[2]);
au_writel(1 << bit, icr[1]);
au_writel(1 << bit, icr[3]);
set_irq_chip_and_handler_name(irq, chip,
handle_level_irq, "lowlevel");
break;
case IRQ_TYPE_NONE: /* 0:0:0 */
au_writel(1 << bit, icr[5]);
au_writel(1 << bit, icr[4]);
au_writel(1 << bit, icr[3]);
/* set at least chip so we can call set_irq_type() on it */
set_irq_chip(irq, chip);
break;
default:
ret = -EINVAL;
}
au_sync();
return ret;
}
asmlinkage void plat_irq_dispatch(void)
{
unsigned int pending = read_c0_status() & read_c0_cause();
unsigned long s, off, bit;
if (pending & CAUSEF_IP7) {
do_IRQ(MIPS_CPU_IRQ_BASE + 7);
return;
} else if (pending & CAUSEF_IP2) {
s = IC0_REQ0INT;
off = AU1000_INTC0_INT_BASE;
} else if (pending & CAUSEF_IP3) {
s = IC0_REQ1INT;
off = AU1000_INTC0_INT_BASE;
} else if (pending & CAUSEF_IP4) {
s = IC1_REQ0INT;
off = AU1000_INTC1_INT_BASE;
} else if (pending & CAUSEF_IP5) {
s = IC1_REQ1INT;
off = AU1000_INTC1_INT_BASE;
} else
goto spurious;
bit = 0;
s = au_readl(s);
if (unlikely(!s)) {
spurious:
spurious_interrupt();
return;
}
#ifdef AU1000_USB_DEV_REQ_INT
/*
* Because of the tight timing of SETUP token to reply
* transactions, the USB devices-side packet complete
* interrupt needs the highest priority.
*/
bit = 1 << (AU1000_USB_DEV_REQ_INT - AU1000_INTC0_INT_BASE);
if ((pending & CAUSEF_IP2) && (s & bit)) {
do_IRQ(AU1000_USB_DEV_REQ_INT);
return;
}
#endif
do_IRQ(__ffs(s) + off);
}
/* setup edge/level and assign request 0/1 */
void __init au1xxx_setup_irqmap(struct au1xxx_irqmap *map, int count)
{
unsigned int bit, irq_nr;
while (count--) {
irq_nr = map[count].im_irq;
if (((irq_nr < AU1000_INTC0_INT_BASE) ||
(irq_nr >= AU1000_INTC0_INT_BASE + 32)) &&
((irq_nr < AU1000_INTC1_INT_BASE) ||
(irq_nr >= AU1000_INTC1_INT_BASE + 32)))
continue;
if (irq_nr >= AU1000_INTC1_INT_BASE) {
bit = irq_nr - AU1000_INTC1_INT_BASE;
if (map[count].im_request)
au_writel(1 << bit, IC1_ASSIGNCLR);
} else {
bit = irq_nr - AU1000_INTC0_INT_BASE;
if (map[count].im_request)
au_writel(1 << bit, IC0_ASSIGNCLR);
}
au1x_ic_settype(irq_nr, map[count].im_type);
}
}
void __init arch_init_irq(void)
{
int i;
/*
* Initialize interrupt controllers to a safe state.
*/
au_writel(0xffffffff, IC0_CFG0CLR);
au_writel(0xffffffff, IC0_CFG1CLR);
au_writel(0xffffffff, IC0_CFG2CLR);
au_writel(0xffffffff, IC0_MASKCLR);
au_writel(0xffffffff, IC0_ASSIGNSET);
au_writel(0xffffffff, IC0_WAKECLR);
au_writel(0xffffffff, IC0_SRCSET);
au_writel(0xffffffff, IC0_FALLINGCLR);
au_writel(0xffffffff, IC0_RISINGCLR);
au_writel(0x00000000, IC0_TESTBIT);
au_writel(0xffffffff, IC1_CFG0CLR);
au_writel(0xffffffff, IC1_CFG1CLR);
au_writel(0xffffffff, IC1_CFG2CLR);
au_writel(0xffffffff, IC1_MASKCLR);
au_writel(0xffffffff, IC1_ASSIGNSET);
au_writel(0xffffffff, IC1_WAKECLR);
au_writel(0xffffffff, IC1_SRCSET);
au_writel(0xffffffff, IC1_FALLINGCLR);
au_writel(0xffffffff, IC1_RISINGCLR);
au_writel(0x00000000, IC1_TESTBIT);
mips_cpu_irq_init();
/* register all 64 possible IC0+IC1 irq sources as type "none".
* Use set_irq_type() to set edge/level behaviour at runtime.
*/
for (i = AU1000_INTC0_INT_BASE;
(i < AU1000_INTC0_INT_BASE + 32); i++)
au1x_ic_settype(i, IRQ_TYPE_NONE);
for (i = AU1000_INTC1_INT_BASE;
(i < AU1000_INTC1_INT_BASE + 32); i++)
au1x_ic_settype(i, IRQ_TYPE_NONE);
/*
* Initialize IC0, which is fixed per processor.
*/
au1xxx_setup_irqmap(au1xxx_ic0_map, ARRAY_SIZE(au1xxx_ic0_map));
/* Boards can register additional (GPIO-based) IRQs.
*/
board_init_irq();
set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3);
}