3389 lines
85 KiB
C
3389 lines
85 KiB
C
|
/*
|
||
|
* Copyright (c) 2003-2008 Chelsio, Inc. All rights reserved.
|
||
|
*
|
||
|
* This software is available to you under a choice of one of two
|
||
|
* licenses. You may choose to be licensed under the terms of the GNU
|
||
|
* General Public License (GPL) Version 2, available from the file
|
||
|
* COPYING in the main directory of this source tree, or the
|
||
|
* OpenIB.org BSD license below:
|
||
|
*
|
||
|
* Redistribution and use in source and binary forms, with or
|
||
|
* without modification, are permitted provided that the following
|
||
|
* conditions are met:
|
||
|
*
|
||
|
* - Redistributions of source code must retain the above
|
||
|
* copyright notice, this list of conditions and the following
|
||
|
* disclaimer.
|
||
|
*
|
||
|
* - Redistributions in binary form must reproduce the above
|
||
|
* copyright notice, this list of conditions and the following
|
||
|
* disclaimer in the documentation and/or other materials
|
||
|
* provided with the distribution.
|
||
|
*
|
||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
|
||
|
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
|
||
|
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
|
||
|
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
|
||
|
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
|
||
|
* SOFTWARE.
|
||
|
*/
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/moduleparam.h>
|
||
|
#include <linux/init.h>
|
||
|
#include <linux/pci.h>
|
||
|
#include <linux/dma-mapping.h>
|
||
|
#include <linux/netdevice.h>
|
||
|
#include <linux/etherdevice.h>
|
||
|
#include <linux/if_vlan.h>
|
||
|
#include <linux/mdio.h>
|
||
|
#include <linux/sockios.h>
|
||
|
#include <linux/workqueue.h>
|
||
|
#include <linux/proc_fs.h>
|
||
|
#include <linux/rtnetlink.h>
|
||
|
#include <linux/firmware.h>
|
||
|
#include <linux/log2.h>
|
||
|
#include <linux/stringify.h>
|
||
|
#include <asm/uaccess.h>
|
||
|
|
||
|
#include "common.h"
|
||
|
#include "cxgb3_ioctl.h"
|
||
|
#include "regs.h"
|
||
|
#include "cxgb3_offload.h"
|
||
|
#include "version.h"
|
||
|
|
||
|
#include "cxgb3_ctl_defs.h"
|
||
|
#include "t3_cpl.h"
|
||
|
#include "firmware_exports.h"
|
||
|
|
||
|
enum {
|
||
|
MAX_TXQ_ENTRIES = 16384,
|
||
|
MAX_CTRL_TXQ_ENTRIES = 1024,
|
||
|
MAX_RSPQ_ENTRIES = 16384,
|
||
|
MAX_RX_BUFFERS = 16384,
|
||
|
MAX_RX_JUMBO_BUFFERS = 16384,
|
||
|
MIN_TXQ_ENTRIES = 4,
|
||
|
MIN_CTRL_TXQ_ENTRIES = 4,
|
||
|
MIN_RSPQ_ENTRIES = 32,
|
||
|
MIN_FL_ENTRIES = 32
|
||
|
};
|
||
|
|
||
|
#define PORT_MASK ((1 << MAX_NPORTS) - 1)
|
||
|
|
||
|
#define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \
|
||
|
NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP |\
|
||
|
NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR)
|
||
|
|
||
|
#define EEPROM_MAGIC 0x38E2F10C
|
||
|
|
||
|
#define CH_DEVICE(devid, idx) \
|
||
|
{ PCI_VENDOR_ID_CHELSIO, devid, PCI_ANY_ID, PCI_ANY_ID, 0, 0, idx }
|
||
|
|
||
|
static const struct pci_device_id cxgb3_pci_tbl[] = {
|
||
|
CH_DEVICE(0x20, 0), /* PE9000 */
|
||
|
CH_DEVICE(0x21, 1), /* T302E */
|
||
|
CH_DEVICE(0x22, 2), /* T310E */
|
||
|
CH_DEVICE(0x23, 3), /* T320X */
|
||
|
CH_DEVICE(0x24, 1), /* T302X */
|
||
|
CH_DEVICE(0x25, 3), /* T320E */
|
||
|
CH_DEVICE(0x26, 2), /* T310X */
|
||
|
CH_DEVICE(0x30, 2), /* T3B10 */
|
||
|
CH_DEVICE(0x31, 3), /* T3B20 */
|
||
|
CH_DEVICE(0x32, 1), /* T3B02 */
|
||
|
CH_DEVICE(0x35, 6), /* T3C20-derived T3C10 */
|
||
|
CH_DEVICE(0x36, 3), /* S320E-CR */
|
||
|
CH_DEVICE(0x37, 7), /* N320E-G2 */
|
||
|
{0,}
|
||
|
};
|
||
|
|
||
|
MODULE_DESCRIPTION(DRV_DESC);
|
||
|
MODULE_AUTHOR("Chelsio Communications");
|
||
|
MODULE_LICENSE("Dual BSD/GPL");
|
||
|
MODULE_VERSION(DRV_VERSION);
|
||
|
MODULE_DEVICE_TABLE(pci, cxgb3_pci_tbl);
|
||
|
|
||
|
static int dflt_msg_enable = DFLT_MSG_ENABLE;
|
||
|
|
||
|
module_param(dflt_msg_enable, int, 0644);
|
||
|
MODULE_PARM_DESC(dflt_msg_enable, "Chelsio T3 default message enable bitmap");
|
||
|
|
||
|
/*
|
||
|
* The driver uses the best interrupt scheme available on a platform in the
|
||
|
* order MSI-X, MSI, legacy pin interrupts. This parameter determines which
|
||
|
* of these schemes the driver may consider as follows:
|
||
|
*
|
||
|
* msi = 2: choose from among all three options
|
||
|
* msi = 1: only consider MSI and pin interrupts
|
||
|
* msi = 0: force pin interrupts
|
||
|
*/
|
||
|
static int msi = 2;
|
||
|
|
||
|
module_param(msi, int, 0644);
|
||
|
MODULE_PARM_DESC(msi, "whether to use MSI or MSI-X");
|
||
|
|
||
|
/*
|
||
|
* The driver enables offload as a default.
|
||
|
* To disable it, use ofld_disable = 1.
|
||
|
*/
|
||
|
|
||
|
static int ofld_disable = 0;
|
||
|
|
||
|
module_param(ofld_disable, int, 0644);
|
||
|
MODULE_PARM_DESC(ofld_disable, "whether to enable offload at init time or not");
|
||
|
|
||
|
/*
|
||
|
* We have work elements that we need to cancel when an interface is taken
|
||
|
* down. Normally the work elements would be executed by keventd but that
|
||
|
* can deadlock because of linkwatch. If our close method takes the rtnl
|
||
|
* lock and linkwatch is ahead of our work elements in keventd, linkwatch
|
||
|
* will block keventd as it needs the rtnl lock, and we'll deadlock waiting
|
||
|
* for our work to complete. Get our own work queue to solve this.
|
||
|
*/
|
||
|
static struct workqueue_struct *cxgb3_wq;
|
||
|
|
||
|
/**
|
||
|
* link_report - show link status and link speed/duplex
|
||
|
* @p: the port whose settings are to be reported
|
||
|
*
|
||
|
* Shows the link status, speed, and duplex of a port.
|
||
|
*/
|
||
|
static void link_report(struct net_device *dev)
|
||
|
{
|
||
|
if (!netif_carrier_ok(dev))
|
||
|
printk(KERN_INFO "%s: link down\n", dev->name);
|
||
|
else {
|
||
|
const char *s = "10Mbps";
|
||
|
const struct port_info *p = netdev_priv(dev);
|
||
|
|
||
|
switch (p->link_config.speed) {
|
||
|
case SPEED_10000:
|
||
|
s = "10Gbps";
|
||
|
break;
|
||
|
case SPEED_1000:
|
||
|
s = "1000Mbps";
|
||
|
break;
|
||
|
case SPEED_100:
|
||
|
s = "100Mbps";
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
printk(KERN_INFO "%s: link up, %s, %s-duplex\n", dev->name, s,
|
||
|
p->link_config.duplex == DUPLEX_FULL ? "full" : "half");
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static void enable_tx_fifo_drain(struct adapter *adapter,
|
||
|
struct port_info *pi)
|
||
|
{
|
||
|
t3_set_reg_field(adapter, A_XGM_TXFIFO_CFG + pi->mac.offset, 0,
|
||
|
F_ENDROPPKT);
|
||
|
t3_write_reg(adapter, A_XGM_RX_CTRL + pi->mac.offset, 0);
|
||
|
t3_write_reg(adapter, A_XGM_TX_CTRL + pi->mac.offset, F_TXEN);
|
||
|
t3_write_reg(adapter, A_XGM_RX_CTRL + pi->mac.offset, F_RXEN);
|
||
|
}
|
||
|
|
||
|
static void disable_tx_fifo_drain(struct adapter *adapter,
|
||
|
struct port_info *pi)
|
||
|
{
|
||
|
t3_set_reg_field(adapter, A_XGM_TXFIFO_CFG + pi->mac.offset,
|
||
|
F_ENDROPPKT, 0);
|
||
|
}
|
||
|
|
||
|
void t3_os_link_fault(struct adapter *adap, int port_id, int state)
|
||
|
{
|
||
|
struct net_device *dev = adap->port[port_id];
|
||
|
struct port_info *pi = netdev_priv(dev);
|
||
|
|
||
|
if (state == netif_carrier_ok(dev))
|
||
|
return;
|
||
|
|
||
|
if (state) {
|
||
|
struct cmac *mac = &pi->mac;
|
||
|
|
||
|
netif_carrier_on(dev);
|
||
|
|
||
|
disable_tx_fifo_drain(adap, pi);
|
||
|
|
||
|
/* Clear local faults */
|
||
|
t3_xgm_intr_disable(adap, pi->port_id);
|
||
|
t3_read_reg(adap, A_XGM_INT_STATUS +
|
||
|
pi->mac.offset);
|
||
|
t3_write_reg(adap,
|
||
|
A_XGM_INT_CAUSE + pi->mac.offset,
|
||
|
F_XGM_INT);
|
||
|
|
||
|
t3_set_reg_field(adap,
|
||
|
A_XGM_INT_ENABLE +
|
||
|
pi->mac.offset,
|
||
|
F_XGM_INT, F_XGM_INT);
|
||
|
t3_xgm_intr_enable(adap, pi->port_id);
|
||
|
|
||
|
t3_mac_enable(mac, MAC_DIRECTION_TX);
|
||
|
} else {
|
||
|
netif_carrier_off(dev);
|
||
|
|
||
|
/* Flush TX FIFO */
|
||
|
enable_tx_fifo_drain(adap, pi);
|
||
|
}
|
||
|
link_report(dev);
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* t3_os_link_changed - handle link status changes
|
||
|
* @adapter: the adapter associated with the link change
|
||
|
* @port_id: the port index whose limk status has changed
|
||
|
* @link_stat: the new status of the link
|
||
|
* @speed: the new speed setting
|
||
|
* @duplex: the new duplex setting
|
||
|
* @pause: the new flow-control setting
|
||
|
*
|
||
|
* This is the OS-dependent handler for link status changes. The OS
|
||
|
* neutral handler takes care of most of the processing for these events,
|
||
|
* then calls this handler for any OS-specific processing.
|
||
|
*/
|
||
|
void t3_os_link_changed(struct adapter *adapter, int port_id, int link_stat,
|
||
|
int speed, int duplex, int pause)
|
||
|
{
|
||
|
struct net_device *dev = adapter->port[port_id];
|
||
|
struct port_info *pi = netdev_priv(dev);
|
||
|
struct cmac *mac = &pi->mac;
|
||
|
|
||
|
/* Skip changes from disabled ports. */
|
||
|
if (!netif_running(dev))
|
||
|
return;
|
||
|
|
||
|
if (link_stat != netif_carrier_ok(dev)) {
|
||
|
if (link_stat) {
|
||
|
disable_tx_fifo_drain(adapter, pi);
|
||
|
|
||
|
t3_mac_enable(mac, MAC_DIRECTION_RX);
|
||
|
|
||
|
/* Clear local faults */
|
||
|
t3_xgm_intr_disable(adapter, pi->port_id);
|
||
|
t3_read_reg(adapter, A_XGM_INT_STATUS +
|
||
|
pi->mac.offset);
|
||
|
t3_write_reg(adapter,
|
||
|
A_XGM_INT_CAUSE + pi->mac.offset,
|
||
|
F_XGM_INT);
|
||
|
|
||
|
t3_set_reg_field(adapter,
|
||
|
A_XGM_INT_ENABLE + pi->mac.offset,
|
||
|
F_XGM_INT, F_XGM_INT);
|
||
|
t3_xgm_intr_enable(adapter, pi->port_id);
|
||
|
|
||
|
netif_carrier_on(dev);
|
||
|
} else {
|
||
|
netif_carrier_off(dev);
|
||
|
|
||
|
t3_xgm_intr_disable(adapter, pi->port_id);
|
||
|
t3_read_reg(adapter, A_XGM_INT_STATUS + pi->mac.offset);
|
||
|
t3_set_reg_field(adapter,
|
||
|
A_XGM_INT_ENABLE + pi->mac.offset,
|
||
|
F_XGM_INT, 0);
|
||
|
|
||
|
if (is_10G(adapter))
|
||
|
pi->phy.ops->power_down(&pi->phy, 1);
|
||
|
|
||
|
t3_read_reg(adapter, A_XGM_INT_STATUS + pi->mac.offset);
|
||
|
t3_mac_disable(mac, MAC_DIRECTION_RX);
|
||
|
t3_link_start(&pi->phy, mac, &pi->link_config);
|
||
|
|
||
|
/* Flush TX FIFO */
|
||
|
enable_tx_fifo_drain(adapter, pi);
|
||
|
}
|
||
|
|
||
|
link_report(dev);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* t3_os_phymod_changed - handle PHY module changes
|
||
|
* @phy: the PHY reporting the module change
|
||
|
* @mod_type: new module type
|
||
|
*
|
||
|
* This is the OS-dependent handler for PHY module changes. It is
|
||
|
* invoked when a PHY module is removed or inserted for any OS-specific
|
||
|
* processing.
|
||
|
*/
|
||
|
void t3_os_phymod_changed(struct adapter *adap, int port_id)
|
||
|
{
|
||
|
static const char *mod_str[] = {
|
||
|
NULL, "SR", "LR", "LRM", "TWINAX", "TWINAX", "unknown"
|
||
|
};
|
||
|
|
||
|
const struct net_device *dev = adap->port[port_id];
|
||
|
const struct port_info *pi = netdev_priv(dev);
|
||
|
|
||
|
if (pi->phy.modtype == phy_modtype_none)
|
||
|
printk(KERN_INFO "%s: PHY module unplugged\n", dev->name);
|
||
|
else
|
||
|
printk(KERN_INFO "%s: %s PHY module inserted\n", dev->name,
|
||
|
mod_str[pi->phy.modtype]);
|
||
|
}
|
||
|
|
||
|
static void cxgb_set_rxmode(struct net_device *dev)
|
||
|
{
|
||
|
struct t3_rx_mode rm;
|
||
|
struct port_info *pi = netdev_priv(dev);
|
||
|
|
||
|
init_rx_mode(&rm, dev, dev->mc_list);
|
||
|
t3_mac_set_rx_mode(&pi->mac, &rm);
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* link_start - enable a port
|
||
|
* @dev: the device to enable
|
||
|
*
|
||
|
* Performs the MAC and PHY actions needed to enable a port.
|
||
|
*/
|
||
|
static void link_start(struct net_device *dev)
|
||
|
{
|
||
|
struct t3_rx_mode rm;
|
||
|
struct port_info *pi = netdev_priv(dev);
|
||
|
struct cmac *mac = &pi->mac;
|
||
|
|
||
|
init_rx_mode(&rm, dev, dev->mc_list);
|
||
|
t3_mac_reset(mac);
|
||
|
t3_mac_set_mtu(mac, dev->mtu);
|
||
|
t3_mac_set_address(mac, 0, dev->dev_addr);
|
||
|
t3_mac_set_rx_mode(mac, &rm);
|
||
|
t3_link_start(&pi->phy, mac, &pi->link_config);
|
||
|
t3_mac_enable(mac, MAC_DIRECTION_RX | MAC_DIRECTION_TX);
|
||
|
}
|
||
|
|
||
|
static inline void cxgb_disable_msi(struct adapter *adapter)
|
||
|
{
|
||
|
if (adapter->flags & USING_MSIX) {
|
||
|
pci_disable_msix(adapter->pdev);
|
||
|
adapter->flags &= ~USING_MSIX;
|
||
|
} else if (adapter->flags & USING_MSI) {
|
||
|
pci_disable_msi(adapter->pdev);
|
||
|
adapter->flags &= ~USING_MSI;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Interrupt handler for asynchronous events used with MSI-X.
|
||
|
*/
|
||
|
static irqreturn_t t3_async_intr_handler(int irq, void *cookie)
|
||
|
{
|
||
|
t3_slow_intr_handler(cookie);
|
||
|
return IRQ_HANDLED;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Name the MSI-X interrupts.
|
||
|
*/
|
||
|
static void name_msix_vecs(struct adapter *adap)
|
||
|
{
|
||
|
int i, j, msi_idx = 1, n = sizeof(adap->msix_info[0].desc) - 1;
|
||
|
|
||
|
snprintf(adap->msix_info[0].desc, n, "%s", adap->name);
|
||
|
adap->msix_info[0].desc[n] = 0;
|
||
|
|
||
|
for_each_port(adap, j) {
|
||
|
struct net_device *d = adap->port[j];
|
||
|
const struct port_info *pi = netdev_priv(d);
|
||
|
|
||
|
for (i = 0; i < pi->nqsets; i++, msi_idx++) {
|
||
|
snprintf(adap->msix_info[msi_idx].desc, n,
|
||
|
"%s-%d", d->name, pi->first_qset + i);
|
||
|
adap->msix_info[msi_idx].desc[n] = 0;
|
||
|
}
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static int request_msix_data_irqs(struct adapter *adap)
|
||
|
{
|
||
|
int i, j, err, qidx = 0;
|
||
|
|
||
|
for_each_port(adap, i) {
|
||
|
int nqsets = adap2pinfo(adap, i)->nqsets;
|
||
|
|
||
|
for (j = 0; j < nqsets; ++j) {
|
||
|
err = request_irq(adap->msix_info[qidx + 1].vec,
|
||
|
t3_intr_handler(adap,
|
||
|
adap->sge.qs[qidx].
|
||
|
rspq.polling), 0,
|
||
|
adap->msix_info[qidx + 1].desc,
|
||
|
&adap->sge.qs[qidx]);
|
||
|
if (err) {
|
||
|
while (--qidx >= 0)
|
||
|
free_irq(adap->msix_info[qidx + 1].vec,
|
||
|
&adap->sge.qs[qidx]);
|
||
|
return err;
|
||
|
}
|
||
|
qidx++;
|
||
|
}
|
||
|
}
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static void free_irq_resources(struct adapter *adapter)
|
||
|
{
|
||
|
if (adapter->flags & USING_MSIX) {
|
||
|
int i, n = 0;
|
||
|
|
||
|
free_irq(adapter->msix_info[0].vec, adapter);
|
||
|
for_each_port(adapter, i)
|
||
|
n += adap2pinfo(adapter, i)->nqsets;
|
||
|
|
||
|
for (i = 0; i < n; ++i)
|
||
|
free_irq(adapter->msix_info[i + 1].vec,
|
||
|
&adapter->sge.qs[i]);
|
||
|
} else
|
||
|
free_irq(adapter->pdev->irq, adapter);
|
||
|
}
|
||
|
|
||
|
static int await_mgmt_replies(struct adapter *adap, unsigned long init_cnt,
|
||
|
unsigned long n)
|
||
|
{
|
||
|
int attempts = 5;
|
||
|
|
||
|
while (adap->sge.qs[0].rspq.offload_pkts < init_cnt + n) {
|
||
|
if (!--attempts)
|
||
|
return -ETIMEDOUT;
|
||
|
msleep(10);
|
||
|
}
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int init_tp_parity(struct adapter *adap)
|
||
|
{
|
||
|
int i;
|
||
|
struct sk_buff *skb;
|
||
|
struct cpl_set_tcb_field *greq;
|
||
|
unsigned long cnt = adap->sge.qs[0].rspq.offload_pkts;
|
||
|
|
||
|
t3_tp_set_offload_mode(adap, 1);
|
||
|
|
||
|
for (i = 0; i < 16; i++) {
|
||
|
struct cpl_smt_write_req *req;
|
||
|
|
||
|
skb = alloc_skb(sizeof(*req), GFP_KERNEL);
|
||
|
if (!skb)
|
||
|
skb = adap->nofail_skb;
|
||
|
if (!skb)
|
||
|
goto alloc_skb_fail;
|
||
|
|
||
|
req = (struct cpl_smt_write_req *)__skb_put(skb, sizeof(*req));
|
||
|
memset(req, 0, sizeof(*req));
|
||
|
req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD));
|
||
|
OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SMT_WRITE_REQ, i));
|
||
|
req->mtu_idx = NMTUS - 1;
|
||
|
req->iff = i;
|
||
|
t3_mgmt_tx(adap, skb);
|
||
|
if (skb == adap->nofail_skb) {
|
||
|
await_mgmt_replies(adap, cnt, i + 1);
|
||
|
adap->nofail_skb = alloc_skb(sizeof(*greq), GFP_KERNEL);
|
||
|
if (!adap->nofail_skb)
|
||
|
goto alloc_skb_fail;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
for (i = 0; i < 2048; i++) {
|
||
|
struct cpl_l2t_write_req *req;
|
||
|
|
||
|
skb = alloc_skb(sizeof(*req), GFP_KERNEL);
|
||
|
if (!skb)
|
||
|
skb = adap->nofail_skb;
|
||
|
if (!skb)
|
||
|
goto alloc_skb_fail;
|
||
|
|
||
|
req = (struct cpl_l2t_write_req *)__skb_put(skb, sizeof(*req));
|
||
|
memset(req, 0, sizeof(*req));
|
||
|
req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD));
|
||
|
OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_L2T_WRITE_REQ, i));
|
||
|
req->params = htonl(V_L2T_W_IDX(i));
|
||
|
t3_mgmt_tx(adap, skb);
|
||
|
if (skb == adap->nofail_skb) {
|
||
|
await_mgmt_replies(adap, cnt, 16 + i + 1);
|
||
|
adap->nofail_skb = alloc_skb(sizeof(*greq), GFP_KERNEL);
|
||
|
if (!adap->nofail_skb)
|
||
|
goto alloc_skb_fail;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
for (i = 0; i < 2048; i++) {
|
||
|
struct cpl_rte_write_req *req;
|
||
|
|
||
|
skb = alloc_skb(sizeof(*req), GFP_KERNEL);
|
||
|
if (!skb)
|
||
|
skb = adap->nofail_skb;
|
||
|
if (!skb)
|
||
|
goto alloc_skb_fail;
|
||
|
|
||
|
req = (struct cpl_rte_write_req *)__skb_put(skb, sizeof(*req));
|
||
|
memset(req, 0, sizeof(*req));
|
||
|
req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD));
|
||
|
OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_RTE_WRITE_REQ, i));
|
||
|
req->l2t_idx = htonl(V_L2T_W_IDX(i));
|
||
|
t3_mgmt_tx(adap, skb);
|
||
|
if (skb == adap->nofail_skb) {
|
||
|
await_mgmt_replies(adap, cnt, 16 + 2048 + i + 1);
|
||
|
adap->nofail_skb = alloc_skb(sizeof(*greq), GFP_KERNEL);
|
||
|
if (!adap->nofail_skb)
|
||
|
goto alloc_skb_fail;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
skb = alloc_skb(sizeof(*greq), GFP_KERNEL);
|
||
|
if (!skb)
|
||
|
skb = adap->nofail_skb;
|
||
|
if (!skb)
|
||
|
goto alloc_skb_fail;
|
||
|
|
||
|
greq = (struct cpl_set_tcb_field *)__skb_put(skb, sizeof(*greq));
|
||
|
memset(greq, 0, sizeof(*greq));
|
||
|
greq->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD));
|
||
|
OPCODE_TID(greq) = htonl(MK_OPCODE_TID(CPL_SET_TCB_FIELD, 0));
|
||
|
greq->mask = cpu_to_be64(1);
|
||
|
t3_mgmt_tx(adap, skb);
|
||
|
|
||
|
i = await_mgmt_replies(adap, cnt, 16 + 2048 + 2048 + 1);
|
||
|
if (skb == adap->nofail_skb) {
|
||
|
i = await_mgmt_replies(adap, cnt, 16 + 2048 + 2048 + 1);
|
||
|
adap->nofail_skb = alloc_skb(sizeof(*greq), GFP_KERNEL);
|
||
|
}
|
||
|
|
||
|
t3_tp_set_offload_mode(adap, 0);
|
||
|
return i;
|
||
|
|
||
|
alloc_skb_fail:
|
||
|
t3_tp_set_offload_mode(adap, 0);
|
||
|
return -ENOMEM;
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* setup_rss - configure RSS
|
||
|
* @adap: the adapter
|
||
|
*
|
||
|
* Sets up RSS to distribute packets to multiple receive queues. We
|
||
|
* configure the RSS CPU lookup table to distribute to the number of HW
|
||
|
* receive queues, and the response queue lookup table to narrow that
|
||
|
* down to the response queues actually configured for each port.
|
||
|
* We always configure the RSS mapping for two ports since the mapping
|
||
|
* table has plenty of entries.
|
||
|
*/
|
||
|
static void setup_rss(struct adapter *adap)
|
||
|
{
|
||
|
int i;
|
||
|
unsigned int nq0 = adap2pinfo(adap, 0)->nqsets;
|
||
|
unsigned int nq1 = adap->port[1] ? adap2pinfo(adap, 1)->nqsets : 1;
|
||
|
u8 cpus[SGE_QSETS + 1];
|
||
|
u16 rspq_map[RSS_TABLE_SIZE];
|
||
|
|
||
|
for (i = 0; i < SGE_QSETS; ++i)
|
||
|
cpus[i] = i;
|
||
|
cpus[SGE_QSETS] = 0xff; /* terminator */
|
||
|
|
||
|
for (i = 0; i < RSS_TABLE_SIZE / 2; ++i) {
|
||
|
rspq_map[i] = i % nq0;
|
||
|
rspq_map[i + RSS_TABLE_SIZE / 2] = (i % nq1) + nq0;
|
||
|
}
|
||
|
|
||
|
t3_config_rss(adap, F_RQFEEDBACKENABLE | F_TNLLKPEN | F_TNLMAPEN |
|
||
|
F_TNLPRTEN | F_TNL2TUPEN | F_TNL4TUPEN |
|
||
|
V_RRCPLCPUSIZE(6) | F_HASHTOEPLITZ, cpus, rspq_map);
|
||
|
}
|
||
|
|
||
|
static void init_napi(struct adapter *adap)
|
||
|
{
|
||
|
int i;
|
||
|
|
||
|
for (i = 0; i < SGE_QSETS; i++) {
|
||
|
struct sge_qset *qs = &adap->sge.qs[i];
|
||
|
|
||
|
if (qs->adap)
|
||
|
netif_napi_add(qs->netdev, &qs->napi, qs->napi.poll,
|
||
|
64);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* netif_napi_add() can be called only once per napi_struct because it
|
||
|
* adds each new napi_struct to a list. Be careful not to call it a
|
||
|
* second time, e.g., during EEH recovery, by making a note of it.
|
||
|
*/
|
||
|
adap->flags |= NAPI_INIT;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Wait until all NAPI handlers are descheduled. This includes the handlers of
|
||
|
* both netdevices representing interfaces and the dummy ones for the extra
|
||
|
* queues.
|
||
|
*/
|
||
|
static void quiesce_rx(struct adapter *adap)
|
||
|
{
|
||
|
int i;
|
||
|
|
||
|
for (i = 0; i < SGE_QSETS; i++)
|
||
|
if (adap->sge.qs[i].adap)
|
||
|
napi_disable(&adap->sge.qs[i].napi);
|
||
|
}
|
||
|
|
||
|
static void enable_all_napi(struct adapter *adap)
|
||
|
{
|
||
|
int i;
|
||
|
for (i = 0; i < SGE_QSETS; i++)
|
||
|
if (adap->sge.qs[i].adap)
|
||
|
napi_enable(&adap->sge.qs[i].napi);
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* set_qset_lro - Turn a queue set's LRO capability on and off
|
||
|
* @dev: the device the qset is attached to
|
||
|
* @qset_idx: the queue set index
|
||
|
* @val: the LRO switch
|
||
|
*
|
||
|
* Sets LRO on or off for a particular queue set.
|
||
|
* the device's features flag is updated to reflect the LRO
|
||
|
* capability when all queues belonging to the device are
|
||
|
* in the same state.
|
||
|
*/
|
||
|
static void set_qset_lro(struct net_device *dev, int qset_idx, int val)
|
||
|
{
|
||
|
struct port_info *pi = netdev_priv(dev);
|
||
|
struct adapter *adapter = pi->adapter;
|
||
|
|
||
|
adapter->params.sge.qset[qset_idx].lro = !!val;
|
||
|
adapter->sge.qs[qset_idx].lro_enabled = !!val;
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* setup_sge_qsets - configure SGE Tx/Rx/response queues
|
||
|
* @adap: the adapter
|
||
|
*
|
||
|
* Determines how many sets of SGE queues to use and initializes them.
|
||
|
* We support multiple queue sets per port if we have MSI-X, otherwise
|
||
|
* just one queue set per port.
|
||
|
*/
|
||
|
static int setup_sge_qsets(struct adapter *adap)
|
||
|
{
|
||
|
int i, j, err, irq_idx = 0, qset_idx = 0;
|
||
|
unsigned int ntxq = SGE_TXQ_PER_SET;
|
||
|
|
||
|
if (adap->params.rev > 0 && !(adap->flags & USING_MSI))
|
||
|
irq_idx = -1;
|
||
|
|
||
|
for_each_port(adap, i) {
|
||
|
struct net_device *dev = adap->port[i];
|
||
|
struct port_info *pi = netdev_priv(dev);
|
||
|
|
||
|
pi->qs = &adap->sge.qs[pi->first_qset];
|
||
|
for (j = 0; j < pi->nqsets; ++j, ++qset_idx) {
|
||
|
set_qset_lro(dev, qset_idx, pi->rx_offload & T3_LRO);
|
||
|
err = t3_sge_alloc_qset(adap, qset_idx, 1,
|
||
|
(adap->flags & USING_MSIX) ? qset_idx + 1 :
|
||
|
irq_idx,
|
||
|
&adap->params.sge.qset[qset_idx], ntxq, dev,
|
||
|
netdev_get_tx_queue(dev, j));
|
||
|
if (err) {
|
||
|
t3_free_sge_resources(adap);
|
||
|
return err;
|
||
|
}
|
||
|
}
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static ssize_t attr_show(struct device *d, char *buf,
|
||
|
ssize_t(*format) (struct net_device *, char *))
|
||
|
{
|
||
|
ssize_t len;
|
||
|
|
||
|
/* Synchronize with ioctls that may shut down the device */
|
||
|
rtnl_lock();
|
||
|
len = (*format) (to_net_dev(d), buf);
|
||
|
rtnl_unlock();
|
||
|
return len;
|
||
|
}
|
||
|
|
||
|
static ssize_t attr_store(struct device *d,
|
||
|
const char *buf, size_t len,
|
||
|
ssize_t(*set) (struct net_device *, unsigned int),
|
||
|
unsigned int min_val, unsigned int max_val)
|
||
|
{
|
||
|
char *endp;
|
||
|
ssize_t ret;
|
||
|
unsigned int val;
|
||
|
|
||
|
if (!capable(CAP_NET_ADMIN))
|
||
|
return -EPERM;
|
||
|
|
||
|
val = simple_strtoul(buf, &endp, 0);
|
||
|
if (endp == buf || val < min_val || val > max_val)
|
||
|
return -EINVAL;
|
||
|
|
||
|
rtnl_lock();
|
||
|
ret = (*set) (to_net_dev(d), val);
|
||
|
if (!ret)
|
||
|
ret = len;
|
||
|
rtnl_unlock();
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
#define CXGB3_SHOW(name, val_expr) \
|
||
|
static ssize_t format_##name(struct net_device *dev, char *buf) \
|
||
|
{ \
|
||
|
struct port_info *pi = netdev_priv(dev); \
|
||
|
struct adapter *adap = pi->adapter; \
|
||
|
return sprintf(buf, "%u\n", val_expr); \
|
||
|
} \
|
||
|
static ssize_t show_##name(struct device *d, struct device_attribute *attr, \
|
||
|
char *buf) \
|
||
|
{ \
|
||
|
return attr_show(d, buf, format_##name); \
|
||
|
}
|
||
|
|
||
|
static ssize_t set_nfilters(struct net_device *dev, unsigned int val)
|
||
|
{
|
||
|
struct port_info *pi = netdev_priv(dev);
|
||
|
struct adapter *adap = pi->adapter;
|
||
|
int min_tids = is_offload(adap) ? MC5_MIN_TIDS : 0;
|
||
|
|
||
|
if (adap->flags & FULL_INIT_DONE)
|
||
|
return -EBUSY;
|
||
|
if (val && adap->params.rev == 0)
|
||
|
return -EINVAL;
|
||
|
if (val > t3_mc5_size(&adap->mc5) - adap->params.mc5.nservers -
|
||
|
min_tids)
|
||
|
return -EINVAL;
|
||
|
adap->params.mc5.nfilters = val;
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static ssize_t store_nfilters(struct device *d, struct device_attribute *attr,
|
||
|
const char *buf, size_t len)
|
||
|
{
|
||
|
return attr_store(d, buf, len, set_nfilters, 0, ~0);
|
||
|
}
|
||
|
|
||
|
static ssize_t set_nservers(struct net_device *dev, unsigned int val)
|
||
|
{
|
||
|
struct port_info *pi = netdev_priv(dev);
|
||
|
struct adapter *adap = pi->adapter;
|
||
|
|
||
|
if (adap->flags & FULL_INIT_DONE)
|
||
|
return -EBUSY;
|
||
|
if (val > t3_mc5_size(&adap->mc5) - adap->params.mc5.nfilters -
|
||
|
MC5_MIN_TIDS)
|
||
|
return -EINVAL;
|
||
|
adap->params.mc5.nservers = val;
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static ssize_t store_nservers(struct device *d, struct device_attribute *attr,
|
||
|
const char *buf, size_t len)
|
||
|
{
|
||
|
return attr_store(d, buf, len, set_nservers, 0, ~0);
|
||
|
}
|
||
|
|
||
|
#define CXGB3_ATTR_R(name, val_expr) \
|
||
|
CXGB3_SHOW(name, val_expr) \
|
||
|
static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL)
|
||
|
|
||
|
#define CXGB3_ATTR_RW(name, val_expr, store_method) \
|
||
|
CXGB3_SHOW(name, val_expr) \
|
||
|
static DEVICE_ATTR(name, S_IRUGO | S_IWUSR, show_##name, store_method)
|
||
|
|
||
|
CXGB3_ATTR_R(cam_size, t3_mc5_size(&adap->mc5));
|
||
|
CXGB3_ATTR_RW(nfilters, adap->params.mc5.nfilters, store_nfilters);
|
||
|
CXGB3_ATTR_RW(nservers, adap->params.mc5.nservers, store_nservers);
|
||
|
|
||
|
static struct attribute *cxgb3_attrs[] = {
|
||
|
&dev_attr_cam_size.attr,
|
||
|
&dev_attr_nfilters.attr,
|
||
|
&dev_attr_nservers.attr,
|
||
|
NULL
|
||
|
};
|
||
|
|
||
|
static struct attribute_group cxgb3_attr_group = {.attrs = cxgb3_attrs };
|
||
|
|
||
|
static ssize_t tm_attr_show(struct device *d,
|
||
|
char *buf, int sched)
|
||
|
{
|
||
|
struct port_info *pi = netdev_priv(to_net_dev(d));
|
||
|
struct adapter *adap = pi->adapter;
|
||
|
unsigned int v, addr, bpt, cpt;
|
||
|
ssize_t len;
|
||
|
|
||
|
addr = A_TP_TX_MOD_Q1_Q0_RATE_LIMIT - sched / 2;
|
||
|
rtnl_lock();
|
||
|
t3_write_reg(adap, A_TP_TM_PIO_ADDR, addr);
|
||
|
v = t3_read_reg(adap, A_TP_TM_PIO_DATA);
|
||
|
if (sched & 1)
|
||
|
v >>= 16;
|
||
|
bpt = (v >> 8) & 0xff;
|
||
|
cpt = v & 0xff;
|
||
|
if (!cpt)
|
||
|
len = sprintf(buf, "disabled\n");
|
||
|
else {
|
||
|
v = (adap->params.vpd.cclk * 1000) / cpt;
|
||
|
len = sprintf(buf, "%u Kbps\n", (v * bpt) / 125);
|
||
|
}
|
||
|
rtnl_unlock();
|
||
|
return len;
|
||
|
}
|
||
|
|
||
|
static ssize_t tm_attr_store(struct device *d,
|
||
|
const char *buf, size_t len, int sched)
|
||
|
{
|
||
|
struct port_info *pi = netdev_priv(to_net_dev(d));
|
||
|
struct adapter *adap = pi->adapter;
|
||
|
unsigned int val;
|
||
|
char *endp;
|
||
|
ssize_t ret;
|
||
|
|
||
|
if (!capable(CAP_NET_ADMIN))
|
||
|
return -EPERM;
|
||
|
|
||
|
val = simple_strtoul(buf, &endp, 0);
|
||
|
if (endp == buf || val > 10000000)
|
||
|
return -EINVAL;
|
||
|
|
||
|
rtnl_lock();
|
||
|
ret = t3_config_sched(adap, val, sched);
|
||
|
if (!ret)
|
||
|
ret = len;
|
||
|
rtnl_unlock();
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
#define TM_ATTR(name, sched) \
|
||
|
static ssize_t show_##name(struct device *d, struct device_attribute *attr, \
|
||
|
char *buf) \
|
||
|
{ \
|
||
|
return tm_attr_show(d, buf, sched); \
|
||
|
} \
|
||
|
static ssize_t store_##name(struct device *d, struct device_attribute *attr, \
|
||
|
const char *buf, size_t len) \
|
||
|
{ \
|
||
|
return tm_attr_store(d, buf, len, sched); \
|
||
|
} \
|
||
|
static DEVICE_ATTR(name, S_IRUGO | S_IWUSR, show_##name, store_##name)
|
||
|
|
||
|
TM_ATTR(sched0, 0);
|
||
|
TM_ATTR(sched1, 1);
|
||
|
TM_ATTR(sched2, 2);
|
||
|
TM_ATTR(sched3, 3);
|
||
|
TM_ATTR(sched4, 4);
|
||
|
TM_ATTR(sched5, 5);
|
||
|
TM_ATTR(sched6, 6);
|
||
|
TM_ATTR(sched7, 7);
|
||
|
|
||
|
static struct attribute *offload_attrs[] = {
|
||
|
&dev_attr_sched0.attr,
|
||
|
&dev_attr_sched1.attr,
|
||
|
&dev_attr_sched2.attr,
|
||
|
&dev_attr_sched3.attr,
|
||
|
&dev_attr_sched4.attr,
|
||
|
&dev_attr_sched5.attr,
|
||
|
&dev_attr_sched6.attr,
|
||
|
&dev_attr_sched7.attr,
|
||
|
NULL
|
||
|
};
|
||
|
|
||
|
static struct attribute_group offload_attr_group = {.attrs = offload_attrs };
|
||
|
|
||
|
/*
|
||
|
* Sends an sk_buff to an offload queue driver
|
||
|
* after dealing with any active network taps.
|
||
|
*/
|
||
|
static inline int offload_tx(struct t3cdev *tdev, struct sk_buff *skb)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
local_bh_disable();
|
||
|
ret = t3_offload_tx(tdev, skb);
|
||
|
local_bh_enable();
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int write_smt_entry(struct adapter *adapter, int idx)
|
||
|
{
|
||
|
struct cpl_smt_write_req *req;
|
||
|
struct sk_buff *skb = alloc_skb(sizeof(*req), GFP_KERNEL);
|
||
|
|
||
|
if (!skb)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
req = (struct cpl_smt_write_req *)__skb_put(skb, sizeof(*req));
|
||
|
req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD));
|
||
|
OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SMT_WRITE_REQ, idx));
|
||
|
req->mtu_idx = NMTUS - 1; /* should be 0 but there's a T3 bug */
|
||
|
req->iff = idx;
|
||
|
memset(req->src_mac1, 0, sizeof(req->src_mac1));
|
||
|
memcpy(req->src_mac0, adapter->port[idx]->dev_addr, ETH_ALEN);
|
||
|
skb->priority = 1;
|
||
|
offload_tx(&adapter->tdev, skb);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int init_smt(struct adapter *adapter)
|
||
|
{
|
||
|
int i;
|
||
|
|
||
|
for_each_port(adapter, i)
|
||
|
write_smt_entry(adapter, i);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static void init_port_mtus(struct adapter *adapter)
|
||
|
{
|
||
|
unsigned int mtus = adapter->port[0]->mtu;
|
||
|
|
||
|
if (adapter->port[1])
|
||
|
mtus |= adapter->port[1]->mtu << 16;
|
||
|
t3_write_reg(adapter, A_TP_MTU_PORT_TABLE, mtus);
|
||
|
}
|
||
|
|
||
|
static int send_pktsched_cmd(struct adapter *adap, int sched, int qidx, int lo,
|
||
|
int hi, int port)
|
||
|
{
|
||
|
struct sk_buff *skb;
|
||
|
struct mngt_pktsched_wr *req;
|
||
|
int ret;
|
||
|
|
||
|
skb = alloc_skb(sizeof(*req), GFP_KERNEL);
|
||
|
if (!skb)
|
||
|
skb = adap->nofail_skb;
|
||
|
if (!skb)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
req = (struct mngt_pktsched_wr *)skb_put(skb, sizeof(*req));
|
||
|
req->wr_hi = htonl(V_WR_OP(FW_WROPCODE_MNGT));
|
||
|
req->mngt_opcode = FW_MNGTOPCODE_PKTSCHED_SET;
|
||
|
req->sched = sched;
|
||
|
req->idx = qidx;
|
||
|
req->min = lo;
|
||
|
req->max = hi;
|
||
|
req->binding = port;
|
||
|
ret = t3_mgmt_tx(adap, skb);
|
||
|
if (skb == adap->nofail_skb) {
|
||
|
adap->nofail_skb = alloc_skb(sizeof(struct cpl_set_tcb_field),
|
||
|
GFP_KERNEL);
|
||
|
if (!adap->nofail_skb)
|
||
|
ret = -ENOMEM;
|
||
|
}
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int bind_qsets(struct adapter *adap)
|
||
|
{
|
||
|
int i, j, err = 0;
|
||
|
|
||
|
for_each_port(adap, i) {
|
||
|
const struct port_info *pi = adap2pinfo(adap, i);
|
||
|
|
||
|
for (j = 0; j < pi->nqsets; ++j) {
|
||
|
int ret = send_pktsched_cmd(adap, 1,
|
||
|
pi->first_qset + j, -1,
|
||
|
-1, i);
|
||
|
if (ret)
|
||
|
err = ret;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
#define FW_VERSION __stringify(FW_VERSION_MAJOR) "." \
|
||
|
__stringify(FW_VERSION_MINOR) "." __stringify(FW_VERSION_MICRO)
|
||
|
#define FW_FNAME "cxgb3/t3fw-" FW_VERSION ".bin"
|
||
|
#define TPSRAM_VERSION __stringify(TP_VERSION_MAJOR) "." \
|
||
|
__stringify(TP_VERSION_MINOR) "." __stringify(TP_VERSION_MICRO)
|
||
|
#define TPSRAM_NAME "cxgb3/t3%c_psram-" TPSRAM_VERSION ".bin"
|
||
|
#define AEL2005_OPT_EDC_NAME "cxgb3/ael2005_opt_edc.bin"
|
||
|
#define AEL2005_TWX_EDC_NAME "cxgb3/ael2005_twx_edc.bin"
|
||
|
#define AEL2020_TWX_EDC_NAME "cxgb3/ael2020_twx_edc.bin"
|
||
|
MODULE_FIRMWARE(FW_FNAME);
|
||
|
MODULE_FIRMWARE("cxgb3/t3b_psram-" TPSRAM_VERSION ".bin");
|
||
|
MODULE_FIRMWARE("cxgb3/t3c_psram-" TPSRAM_VERSION ".bin");
|
||
|
MODULE_FIRMWARE(AEL2005_OPT_EDC_NAME);
|
||
|
MODULE_FIRMWARE(AEL2005_TWX_EDC_NAME);
|
||
|
MODULE_FIRMWARE(AEL2020_TWX_EDC_NAME);
|
||
|
|
||
|
static inline const char *get_edc_fw_name(int edc_idx)
|
||
|
{
|
||
|
const char *fw_name = NULL;
|
||
|
|
||
|
switch (edc_idx) {
|
||
|
case EDC_OPT_AEL2005:
|
||
|
fw_name = AEL2005_OPT_EDC_NAME;
|
||
|
break;
|
||
|
case EDC_TWX_AEL2005:
|
||
|
fw_name = AEL2005_TWX_EDC_NAME;
|
||
|
break;
|
||
|
case EDC_TWX_AEL2020:
|
||
|
fw_name = AEL2020_TWX_EDC_NAME;
|
||
|
break;
|
||
|
}
|
||
|
return fw_name;
|
||
|
}
|
||
|
|
||
|
int t3_get_edc_fw(struct cphy *phy, int edc_idx, int size)
|
||
|
{
|
||
|
struct adapter *adapter = phy->adapter;
|
||
|
const struct firmware *fw;
|
||
|
char buf[64];
|
||
|
u32 csum;
|
||
|
const __be32 *p;
|
||
|
u16 *cache = phy->phy_cache;
|
||
|
int i, ret;
|
||
|
|
||
|
snprintf(buf, sizeof(buf), get_edc_fw_name(edc_idx));
|
||
|
|
||
|
ret = request_firmware(&fw, buf, &adapter->pdev->dev);
|
||
|
if (ret < 0) {
|
||
|
dev_err(&adapter->pdev->dev,
|
||
|
"could not upgrade firmware: unable to load %s\n",
|
||
|
buf);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
/* check size, take checksum in account */
|
||
|
if (fw->size > size + 4) {
|
||
|
CH_ERR(adapter, "firmware image too large %u, expected %d\n",
|
||
|
(unsigned int)fw->size, size + 4);
|
||
|
ret = -EINVAL;
|
||
|
}
|
||
|
|
||
|
/* compute checksum */
|
||
|
p = (const __be32 *)fw->data;
|
||
|
for (csum = 0, i = 0; i < fw->size / sizeof(csum); i++)
|
||
|
csum += ntohl(p[i]);
|
||
|
|
||
|
if (csum != 0xffffffff) {
|
||
|
CH_ERR(adapter, "corrupted firmware image, checksum %u\n",
|
||
|
csum);
|
||
|
ret = -EINVAL;
|
||
|
}
|
||
|
|
||
|
for (i = 0; i < size / 4 ; i++) {
|
||
|
*cache++ = (be32_to_cpu(p[i]) & 0xffff0000) >> 16;
|
||
|
*cache++ = be32_to_cpu(p[i]) & 0xffff;
|
||
|
}
|
||
|
|
||
|
release_firmware(fw);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int upgrade_fw(struct adapter *adap)
|
||
|
{
|
||
|
int ret;
|
||
|
const struct firmware *fw;
|
||
|
struct device *dev = &adap->pdev->dev;
|
||
|
|
||
|
ret = request_firmware(&fw, FW_FNAME, dev);
|
||
|
if (ret < 0) {
|
||
|
dev_err(dev, "could not upgrade firmware: unable to load %s\n",
|
||
|
FW_FNAME);
|
||
|
return ret;
|
||
|
}
|
||
|
ret = t3_load_fw(adap, fw->data, fw->size);
|
||
|
release_firmware(fw);
|
||
|
|
||
|
if (ret == 0)
|
||
|
dev_info(dev, "successful upgrade to firmware %d.%d.%d\n",
|
||
|
FW_VERSION_MAJOR, FW_VERSION_MINOR, FW_VERSION_MICRO);
|
||
|
else
|
||
|
dev_err(dev, "failed to upgrade to firmware %d.%d.%d\n",
|
||
|
FW_VERSION_MAJOR, FW_VERSION_MINOR, FW_VERSION_MICRO);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static inline char t3rev2char(struct adapter *adapter)
|
||
|
{
|
||
|
char rev = 0;
|
||
|
|
||
|
switch(adapter->params.rev) {
|
||
|
case T3_REV_B:
|
||
|
case T3_REV_B2:
|
||
|
rev = 'b';
|
||
|
break;
|
||
|
case T3_REV_C:
|
||
|
rev = 'c';
|
||
|
break;
|
||
|
}
|
||
|
return rev;
|
||
|
}
|
||
|
|
||
|
static int update_tpsram(struct adapter *adap)
|
||
|
{
|
||
|
const struct firmware *tpsram;
|
||
|
char buf[64];
|
||
|
struct device *dev = &adap->pdev->dev;
|
||
|
int ret;
|
||
|
char rev;
|
||
|
|
||
|
rev = t3rev2char(adap);
|
||
|
if (!rev)
|
||
|
return 0;
|
||
|
|
||
|
snprintf(buf, sizeof(buf), TPSRAM_NAME, rev);
|
||
|
|
||
|
ret = request_firmware(&tpsram, buf, dev);
|
||
|
if (ret < 0) {
|
||
|
dev_err(dev, "could not load TP SRAM: unable to load %s\n",
|
||
|
buf);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
ret = t3_check_tpsram(adap, tpsram->data, tpsram->size);
|
||
|
if (ret)
|
||
|
goto release_tpsram;
|
||
|
|
||
|
ret = t3_set_proto_sram(adap, tpsram->data);
|
||
|
if (ret == 0)
|
||
|
dev_info(dev,
|
||
|
"successful update of protocol engine "
|
||
|
"to %d.%d.%d\n",
|
||
|
TP_VERSION_MAJOR, TP_VERSION_MINOR, TP_VERSION_MICRO);
|
||
|
else
|
||
|
dev_err(dev, "failed to update of protocol engine %d.%d.%d\n",
|
||
|
TP_VERSION_MAJOR, TP_VERSION_MINOR, TP_VERSION_MICRO);
|
||
|
if (ret)
|
||
|
dev_err(dev, "loading protocol SRAM failed\n");
|
||
|
|
||
|
release_tpsram:
|
||
|
release_firmware(tpsram);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* cxgb_up - enable the adapter
|
||
|
* @adapter: adapter being enabled
|
||
|
*
|
||
|
* Called when the first port is enabled, this function performs the
|
||
|
* actions necessary to make an adapter operational, such as completing
|
||
|
* the initialization of HW modules, and enabling interrupts.
|
||
|
*
|
||
|
* Must be called with the rtnl lock held.
|
||
|
*/
|
||
|
static int cxgb_up(struct adapter *adap)
|
||
|
{
|
||
|
int err;
|
||
|
|
||
|
if (!(adap->flags & FULL_INIT_DONE)) {
|
||
|
err = t3_check_fw_version(adap);
|
||
|
if (err == -EINVAL) {
|
||
|
err = upgrade_fw(adap);
|
||
|
CH_WARN(adap, "FW upgrade to %d.%d.%d %s\n",
|
||
|
FW_VERSION_MAJOR, FW_VERSION_MINOR,
|
||
|
FW_VERSION_MICRO, err ? "failed" : "succeeded");
|
||
|
}
|
||
|
|
||
|
err = t3_check_tpsram_version(adap);
|
||
|
if (err == -EINVAL) {
|
||
|
err = update_tpsram(adap);
|
||
|
CH_WARN(adap, "TP upgrade to %d.%d.%d %s\n",
|
||
|
TP_VERSION_MAJOR, TP_VERSION_MINOR,
|
||
|
TP_VERSION_MICRO, err ? "failed" : "succeeded");
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Clear interrupts now to catch errors if t3_init_hw fails.
|
||
|
* We clear them again later as initialization may trigger
|
||
|
* conditions that can interrupt.
|
||
|
*/
|
||
|
t3_intr_clear(adap);
|
||
|
|
||
|
err = t3_init_hw(adap, 0);
|
||
|
if (err)
|
||
|
goto out;
|
||
|
|
||
|
t3_set_reg_field(adap, A_TP_PARA_REG5, 0, F_RXDDPOFFINIT);
|
||
|
t3_write_reg(adap, A_ULPRX_TDDP_PSZ, V_HPZ0(PAGE_SHIFT - 12));
|
||
|
|
||
|
err = setup_sge_qsets(adap);
|
||
|
if (err)
|
||
|
goto out;
|
||
|
|
||
|
setup_rss(adap);
|
||
|
if (!(adap->flags & NAPI_INIT))
|
||
|
init_napi(adap);
|
||
|
|
||
|
t3_start_sge_timers(adap);
|
||
|
adap->flags |= FULL_INIT_DONE;
|
||
|
}
|
||
|
|
||
|
t3_intr_clear(adap);
|
||
|
|
||
|
if (adap->flags & USING_MSIX) {
|
||
|
name_msix_vecs(adap);
|
||
|
err = request_irq(adap->msix_info[0].vec,
|
||
|
t3_async_intr_handler, 0,
|
||
|
adap->msix_info[0].desc, adap);
|
||
|
if (err)
|
||
|
goto irq_err;
|
||
|
|
||
|
err = request_msix_data_irqs(adap);
|
||
|
if (err) {
|
||
|
free_irq(adap->msix_info[0].vec, adap);
|
||
|
goto irq_err;
|
||
|
}
|
||
|
} else if ((err = request_irq(adap->pdev->irq,
|
||
|
t3_intr_handler(adap,
|
||
|
adap->sge.qs[0].rspq.
|
||
|
polling),
|
||
|
(adap->flags & USING_MSI) ?
|
||
|
0 : IRQF_SHARED,
|
||
|
adap->name, adap)))
|
||
|
goto irq_err;
|
||
|
|
||
|
enable_all_napi(adap);
|
||
|
t3_sge_start(adap);
|
||
|
t3_intr_enable(adap);
|
||
|
|
||
|
if (adap->params.rev >= T3_REV_C && !(adap->flags & TP_PARITY_INIT) &&
|
||
|
is_offload(adap) && init_tp_parity(adap) == 0)
|
||
|
adap->flags |= TP_PARITY_INIT;
|
||
|
|
||
|
if (adap->flags & TP_PARITY_INIT) {
|
||
|
t3_write_reg(adap, A_TP_INT_CAUSE,
|
||
|
F_CMCACHEPERR | F_ARPLUTPERR);
|
||
|
t3_write_reg(adap, A_TP_INT_ENABLE, 0x7fbfffff);
|
||
|
}
|
||
|
|
||
|
if (!(adap->flags & QUEUES_BOUND)) {
|
||
|
err = bind_qsets(adap);
|
||
|
if (err) {
|
||
|
CH_ERR(adap, "failed to bind qsets, err %d\n", err);
|
||
|
t3_intr_disable(adap);
|
||
|
free_irq_resources(adap);
|
||
|
goto out;
|
||
|
}
|
||
|
adap->flags |= QUEUES_BOUND;
|
||
|
}
|
||
|
|
||
|
out:
|
||
|
return err;
|
||
|
irq_err:
|
||
|
CH_ERR(adap, "request_irq failed, err %d\n", err);
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Release resources when all the ports and offloading have been stopped.
|
||
|
*/
|
||
|
static void cxgb_down(struct adapter *adapter)
|
||
|
{
|
||
|
t3_sge_stop(adapter);
|
||
|
spin_lock_irq(&adapter->work_lock); /* sync with PHY intr task */
|
||
|
t3_intr_disable(adapter);
|
||
|
spin_unlock_irq(&adapter->work_lock);
|
||
|
|
||
|
free_irq_resources(adapter);
|
||
|
quiesce_rx(adapter);
|
||
|
t3_sge_stop(adapter);
|
||
|
flush_workqueue(cxgb3_wq); /* wait for external IRQ handler */
|
||
|
}
|
||
|
|
||
|
static void schedule_chk_task(struct adapter *adap)
|
||
|
{
|
||
|
unsigned int timeo;
|
||
|
|
||
|
timeo = adap->params.linkpoll_period ?
|
||
|
(HZ * adap->params.linkpoll_period) / 10 :
|
||
|
adap->params.stats_update_period * HZ;
|
||
|
if (timeo)
|
||
|
queue_delayed_work(cxgb3_wq, &adap->adap_check_task, timeo);
|
||
|
}
|
||
|
|
||
|
static int offload_open(struct net_device *dev)
|
||
|
{
|
||
|
struct port_info *pi = netdev_priv(dev);
|
||
|
struct adapter *adapter = pi->adapter;
|
||
|
struct t3cdev *tdev = dev2t3cdev(dev);
|
||
|
int adap_up = adapter->open_device_map & PORT_MASK;
|
||
|
int err;
|
||
|
|
||
|
if (test_and_set_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map))
|
||
|
return 0;
|
||
|
|
||
|
if (!adap_up && (err = cxgb_up(adapter)) < 0)
|
||
|
goto out;
|
||
|
|
||
|
t3_tp_set_offload_mode(adapter, 1);
|
||
|
tdev->lldev = adapter->port[0];
|
||
|
err = cxgb3_offload_activate(adapter);
|
||
|
if (err)
|
||
|
goto out;
|
||
|
|
||
|
init_port_mtus(adapter);
|
||
|
t3_load_mtus(adapter, adapter->params.mtus, adapter->params.a_wnd,
|
||
|
adapter->params.b_wnd,
|
||
|
adapter->params.rev == 0 ?
|
||
|
adapter->port[0]->mtu : 0xffff);
|
||
|
init_smt(adapter);
|
||
|
|
||
|
if (sysfs_create_group(&tdev->lldev->dev.kobj, &offload_attr_group))
|
||
|
dev_dbg(&dev->dev, "cannot create sysfs group\n");
|
||
|
|
||
|
/* Call back all registered clients */
|
||
|
cxgb3_add_clients(tdev);
|
||
|
|
||
|
out:
|
||
|
/* restore them in case the offload module has changed them */
|
||
|
if (err) {
|
||
|
t3_tp_set_offload_mode(adapter, 0);
|
||
|
clear_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map);
|
||
|
cxgb3_set_dummy_ops(tdev);
|
||
|
}
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
static int offload_close(struct t3cdev *tdev)
|
||
|
{
|
||
|
struct adapter *adapter = tdev2adap(tdev);
|
||
|
|
||
|
if (!test_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map))
|
||
|
return 0;
|
||
|
|
||
|
/* Call back all registered clients */
|
||
|
cxgb3_remove_clients(tdev);
|
||
|
|
||
|
sysfs_remove_group(&tdev->lldev->dev.kobj, &offload_attr_group);
|
||
|
|
||
|
/* Flush work scheduled while releasing TIDs */
|
||
|
flush_scheduled_work();
|
||
|
|
||
|
tdev->lldev = NULL;
|
||
|
cxgb3_set_dummy_ops(tdev);
|
||
|
t3_tp_set_offload_mode(adapter, 0);
|
||
|
clear_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map);
|
||
|
|
||
|
if (!adapter->open_device_map)
|
||
|
cxgb_down(adapter);
|
||
|
|
||
|
cxgb3_offload_deactivate(adapter);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int cxgb_open(struct net_device *dev)
|
||
|
{
|
||
|
struct port_info *pi = netdev_priv(dev);
|
||
|
struct adapter *adapter = pi->adapter;
|
||
|
int other_ports = adapter->open_device_map & PORT_MASK;
|
||
|
int err;
|
||
|
|
||
|
if (!adapter->open_device_map && (err = cxgb_up(adapter)) < 0)
|
||
|
return err;
|
||
|
|
||
|
set_bit(pi->port_id, &adapter->open_device_map);
|
||
|
if (is_offload(adapter) && !ofld_disable) {
|
||
|
err = offload_open(dev);
|
||
|
if (err)
|
||
|
printk(KERN_WARNING
|
||
|
"Could not initialize offload capabilities\n");
|
||
|
}
|
||
|
|
||
|
dev->real_num_tx_queues = pi->nqsets;
|
||
|
link_start(dev);
|
||
|
t3_port_intr_enable(adapter, pi->port_id);
|
||
|
netif_tx_start_all_queues(dev);
|
||
|
if (!other_ports)
|
||
|
schedule_chk_task(adapter);
|
||
|
|
||
|
cxgb3_event_notify(&adapter->tdev, OFFLOAD_PORT_UP, pi->port_id);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int cxgb_close(struct net_device *dev)
|
||
|
{
|
||
|
struct port_info *pi = netdev_priv(dev);
|
||
|
struct adapter *adapter = pi->adapter;
|
||
|
|
||
|
|
||
|
if (!adapter->open_device_map)
|
||
|
return 0;
|
||
|
|
||
|
/* Stop link fault interrupts */
|
||
|
t3_xgm_intr_disable(adapter, pi->port_id);
|
||
|
t3_read_reg(adapter, A_XGM_INT_STATUS + pi->mac.offset);
|
||
|
|
||
|
t3_port_intr_disable(adapter, pi->port_id);
|
||
|
netif_tx_stop_all_queues(dev);
|
||
|
pi->phy.ops->power_down(&pi->phy, 1);
|
||
|
netif_carrier_off(dev);
|
||
|
t3_mac_disable(&pi->mac, MAC_DIRECTION_TX | MAC_DIRECTION_RX);
|
||
|
|
||
|
spin_lock_irq(&adapter->work_lock); /* sync with update task */
|
||
|
clear_bit(pi->port_id, &adapter->open_device_map);
|
||
|
spin_unlock_irq(&adapter->work_lock);
|
||
|
|
||
|
if (!(adapter->open_device_map & PORT_MASK))
|
||
|
cancel_delayed_work_sync(&adapter->adap_check_task);
|
||
|
|
||
|
if (!adapter->open_device_map)
|
||
|
cxgb_down(adapter);
|
||
|
|
||
|
cxgb3_event_notify(&adapter->tdev, OFFLOAD_PORT_DOWN, pi->port_id);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static struct net_device_stats *cxgb_get_stats(struct net_device *dev)
|
||
|
{
|
||
|
struct port_info *pi = netdev_priv(dev);
|
||
|
struct adapter *adapter = pi->adapter;
|
||
|
struct net_device_stats *ns = &pi->netstats;
|
||
|
const struct mac_stats *pstats;
|
||
|
|
||
|
spin_lock(&adapter->stats_lock);
|
||
|
pstats = t3_mac_update_stats(&pi->mac);
|
||
|
spin_unlock(&adapter->stats_lock);
|
||
|
|
||
|
ns->tx_bytes = pstats->tx_octets;
|
||
|
ns->tx_packets = pstats->tx_frames;
|
||
|
ns->rx_bytes = pstats->rx_octets;
|
||
|
ns->rx_packets = pstats->rx_frames;
|
||
|
ns->multicast = pstats->rx_mcast_frames;
|
||
|
|
||
|
ns->tx_errors = pstats->tx_underrun;
|
||
|
ns->rx_errors = pstats->rx_symbol_errs + pstats->rx_fcs_errs +
|
||
|
pstats->rx_too_long + pstats->rx_jabber + pstats->rx_short +
|
||
|
pstats->rx_fifo_ovfl;
|
||
|
|
||
|
/* detailed rx_errors */
|
||
|
ns->rx_length_errors = pstats->rx_jabber + pstats->rx_too_long;
|
||
|
ns->rx_over_errors = 0;
|
||
|
ns->rx_crc_errors = pstats->rx_fcs_errs;
|
||
|
ns->rx_frame_errors = pstats->rx_symbol_errs;
|
||
|
ns->rx_fifo_errors = pstats->rx_fifo_ovfl;
|
||
|
ns->rx_missed_errors = pstats->rx_cong_drops;
|
||
|
|
||
|
/* detailed tx_errors */
|
||
|
ns->tx_aborted_errors = 0;
|
||
|
ns->tx_carrier_errors = 0;
|
||
|
ns->tx_fifo_errors = pstats->tx_underrun;
|
||
|
ns->tx_heartbeat_errors = 0;
|
||
|
ns->tx_window_errors = 0;
|
||
|
return ns;
|
||
|
}
|
||
|
|
||
|
static u32 get_msglevel(struct net_device *dev)
|
||
|
{
|
||
|
struct port_info *pi = netdev_priv(dev);
|
||
|
struct adapter *adapter = pi->adapter;
|
||
|
|
||
|
return adapter->msg_enable;
|
||
|
}
|
||
|
|
||
|
static void set_msglevel(struct net_device *dev, u32 val)
|
||
|
{
|
||
|
struct port_info *pi = netdev_priv(dev);
|
||
|
struct adapter *adapter = pi->adapter;
|
||
|
|
||
|
adapter->msg_enable = val;
|
||
|
}
|
||
|
|
||
|
static char stats_strings[][ETH_GSTRING_LEN] = {
|
||
|
"TxOctetsOK ",
|
||
|
"TxFramesOK ",
|
||
|
"TxMulticastFramesOK",
|
||
|
"TxBroadcastFramesOK",
|
||
|
"TxPauseFrames ",
|
||
|
"TxUnderrun ",
|
||
|
"TxExtUnderrun ",
|
||
|
|
||
|
"TxFrames64 ",
|
||
|
"TxFrames65To127 ",
|
||
|
"TxFrames128To255 ",
|
||
|
"TxFrames256To511 ",
|
||
|
"TxFrames512To1023 ",
|
||
|
"TxFrames1024To1518 ",
|
||
|
"TxFrames1519ToMax ",
|
||
|
|
||
|
"RxOctetsOK ",
|
||
|
"RxFramesOK ",
|
||
|
"RxMulticastFramesOK",
|
||
|
"RxBroadcastFramesOK",
|
||
|
"RxPauseFrames ",
|
||
|
"RxFCSErrors ",
|
||
|
"RxSymbolErrors ",
|
||
|
"RxShortErrors ",
|
||
|
"RxJabberErrors ",
|
||
|
"RxLengthErrors ",
|
||
|
"RxFIFOoverflow ",
|
||
|
|
||
|
"RxFrames64 ",
|
||
|
"RxFrames65To127 ",
|
||
|
"RxFrames128To255 ",
|
||
|
"RxFrames256To511 ",
|
||
|
"RxFrames512To1023 ",
|
||
|
"RxFrames1024To1518 ",
|
||
|
"RxFrames1519ToMax ",
|
||
|
|
||
|
"PhyFIFOErrors ",
|
||
|
"TSO ",
|
||
|
"VLANextractions ",
|
||
|
"VLANinsertions ",
|
||
|
"TxCsumOffload ",
|
||
|
"RxCsumGood ",
|
||
|
"LroAggregated ",
|
||
|
"LroFlushed ",
|
||
|
"LroNoDesc ",
|
||
|
"RxDrops ",
|
||
|
|
||
|
"CheckTXEnToggled ",
|
||
|
"CheckResets ",
|
||
|
|
||
|
"LinkFaults ",
|
||
|
};
|
||
|
|
||
|
static int get_sset_count(struct net_device *dev, int sset)
|
||
|
{
|
||
|
switch (sset) {
|
||
|
case ETH_SS_STATS:
|
||
|
return ARRAY_SIZE(stats_strings);
|
||
|
default:
|
||
|
return -EOPNOTSUPP;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
#define T3_REGMAP_SIZE (3 * 1024)
|
||
|
|
||
|
static int get_regs_len(struct net_device *dev)
|
||
|
{
|
||
|
return T3_REGMAP_SIZE;
|
||
|
}
|
||
|
|
||
|
static int get_eeprom_len(struct net_device *dev)
|
||
|
{
|
||
|
return EEPROMSIZE;
|
||
|
}
|
||
|
|
||
|
static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
|
||
|
{
|
||
|
struct port_info *pi = netdev_priv(dev);
|
||
|
struct adapter *adapter = pi->adapter;
|
||
|
u32 fw_vers = 0;
|
||
|
u32 tp_vers = 0;
|
||
|
|
||
|
spin_lock(&adapter->stats_lock);
|
||
|
t3_get_fw_version(adapter, &fw_vers);
|
||
|
t3_get_tp_version(adapter, &tp_vers);
|
||
|
spin_unlock(&adapter->stats_lock);
|
||
|
|
||
|
strcpy(info->driver, DRV_NAME);
|
||
|
strcpy(info->version, DRV_VERSION);
|
||
|
strcpy(info->bus_info, pci_name(adapter->pdev));
|
||
|
if (!fw_vers)
|
||
|
strcpy(info->fw_version, "N/A");
|
||
|
else {
|
||
|
snprintf(info->fw_version, sizeof(info->fw_version),
|
||
|
"%s %u.%u.%u TP %u.%u.%u",
|
||
|
G_FW_VERSION_TYPE(fw_vers) ? "T" : "N",
|
||
|
G_FW_VERSION_MAJOR(fw_vers),
|
||
|
G_FW_VERSION_MINOR(fw_vers),
|
||
|
G_FW_VERSION_MICRO(fw_vers),
|
||
|
G_TP_VERSION_MAJOR(tp_vers),
|
||
|
G_TP_VERSION_MINOR(tp_vers),
|
||
|
G_TP_VERSION_MICRO(tp_vers));
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static void get_strings(struct net_device *dev, u32 stringset, u8 * data)
|
||
|
{
|
||
|
if (stringset == ETH_SS_STATS)
|
||
|
memcpy(data, stats_strings, sizeof(stats_strings));
|
||
|
}
|
||
|
|
||
|
static unsigned long collect_sge_port_stats(struct adapter *adapter,
|
||
|
struct port_info *p, int idx)
|
||
|
{
|
||
|
int i;
|
||
|
unsigned long tot = 0;
|
||
|
|
||
|
for (i = p->first_qset; i < p->first_qset + p->nqsets; ++i)
|
||
|
tot += adapter->sge.qs[i].port_stats[idx];
|
||
|
return tot;
|
||
|
}
|
||
|
|
||
|
static void get_stats(struct net_device *dev, struct ethtool_stats *stats,
|
||
|
u64 *data)
|
||
|
{
|
||
|
struct port_info *pi = netdev_priv(dev);
|
||
|
struct adapter *adapter = pi->adapter;
|
||
|
const struct mac_stats *s;
|
||
|
|
||
|
spin_lock(&adapter->stats_lock);
|
||
|
s = t3_mac_update_stats(&pi->mac);
|
||
|
spin_unlock(&adapter->stats_lock);
|
||
|
|
||
|
*data++ = s->tx_octets;
|
||
|
*data++ = s->tx_frames;
|
||
|
*data++ = s->tx_mcast_frames;
|
||
|
*data++ = s->tx_bcast_frames;
|
||
|
*data++ = s->tx_pause;
|
||
|
*data++ = s->tx_underrun;
|
||
|
*data++ = s->tx_fifo_urun;
|
||
|
|
||
|
*data++ = s->tx_frames_64;
|
||
|
*data++ = s->tx_frames_65_127;
|
||
|
*data++ = s->tx_frames_128_255;
|
||
|
*data++ = s->tx_frames_256_511;
|
||
|
*data++ = s->tx_frames_512_1023;
|
||
|
*data++ = s->tx_frames_1024_1518;
|
||
|
*data++ = s->tx_frames_1519_max;
|
||
|
|
||
|
*data++ = s->rx_octets;
|
||
|
*data++ = s->rx_frames;
|
||
|
*data++ = s->rx_mcast_frames;
|
||
|
*data++ = s->rx_bcast_frames;
|
||
|
*data++ = s->rx_pause;
|
||
|
*data++ = s->rx_fcs_errs;
|
||
|
*data++ = s->rx_symbol_errs;
|
||
|
*data++ = s->rx_short;
|
||
|
*data++ = s->rx_jabber;
|
||
|
*data++ = s->rx_too_long;
|
||
|
*data++ = s->rx_fifo_ovfl;
|
||
|
|
||
|
*data++ = s->rx_frames_64;
|
||
|
*data++ = s->rx_frames_65_127;
|
||
|
*data++ = s->rx_frames_128_255;
|
||
|
*data++ = s->rx_frames_256_511;
|
||
|
*data++ = s->rx_frames_512_1023;
|
||
|
*data++ = s->rx_frames_1024_1518;
|
||
|
*data++ = s->rx_frames_1519_max;
|
||
|
|
||
|
*data++ = pi->phy.fifo_errors;
|
||
|
|
||
|
*data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_TSO);
|
||
|
*data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_VLANEX);
|
||
|
*data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_VLANINS);
|
||
|
*data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_TX_CSUM);
|
||
|
*data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_RX_CSUM_GOOD);
|
||
|
*data++ = 0;
|
||
|
*data++ = 0;
|
||
|
*data++ = 0;
|
||
|
*data++ = s->rx_cong_drops;
|
||
|
|
||
|
*data++ = s->num_toggled;
|
||
|
*data++ = s->num_resets;
|
||
|
|
||
|
*data++ = s->link_faults;
|
||
|
}
|
||
|
|
||
|
static inline void reg_block_dump(struct adapter *ap, void *buf,
|
||
|
unsigned int start, unsigned int end)
|
||
|
{
|
||
|
u32 *p = buf + start;
|
||
|
|
||
|
for (; start <= end; start += sizeof(u32))
|
||
|
*p++ = t3_read_reg(ap, start);
|
||
|
}
|
||
|
|
||
|
static void get_regs(struct net_device *dev, struct ethtool_regs *regs,
|
||
|
void *buf)
|
||
|
{
|
||
|
struct port_info *pi = netdev_priv(dev);
|
||
|
struct adapter *ap = pi->adapter;
|
||
|
|
||
|
/*
|
||
|
* Version scheme:
|
||
|
* bits 0..9: chip version
|
||
|
* bits 10..15: chip revision
|
||
|
* bit 31: set for PCIe cards
|
||
|
*/
|
||
|
regs->version = 3 | (ap->params.rev << 10) | (is_pcie(ap) << 31);
|
||
|
|
||
|
/*
|
||
|
* We skip the MAC statistics registers because they are clear-on-read.
|
||
|
* Also reading multi-register stats would need to synchronize with the
|
||
|
* periodic mac stats accumulation. Hard to justify the complexity.
|
||
|
*/
|
||
|
memset(buf, 0, T3_REGMAP_SIZE);
|
||
|
reg_block_dump(ap, buf, 0, A_SG_RSPQ_CREDIT_RETURN);
|
||
|
reg_block_dump(ap, buf, A_SG_HI_DRB_HI_THRSH, A_ULPRX_PBL_ULIMIT);
|
||
|
reg_block_dump(ap, buf, A_ULPTX_CONFIG, A_MPS_INT_CAUSE);
|
||
|
reg_block_dump(ap, buf, A_CPL_SWITCH_CNTRL, A_CPL_MAP_TBL_DATA);
|
||
|
reg_block_dump(ap, buf, A_SMB_GLOBAL_TIME_CFG, A_XGM_SERDES_STAT3);
|
||
|
reg_block_dump(ap, buf, A_XGM_SERDES_STATUS0,
|
||
|
XGM_REG(A_XGM_SERDES_STAT3, 1));
|
||
|
reg_block_dump(ap, buf, XGM_REG(A_XGM_SERDES_STATUS0, 1),
|
||
|
XGM_REG(A_XGM_RX_SPI4_SOP_EOP_CNT, 1));
|
||
|
}
|
||
|
|
||
|
static int restart_autoneg(struct net_device *dev)
|
||
|
{
|
||
|
struct port_info *p = netdev_priv(dev);
|
||
|
|
||
|
if (!netif_running(dev))
|
||
|
return -EAGAIN;
|
||
|
if (p->link_config.autoneg != AUTONEG_ENABLE)
|
||
|
return -EINVAL;
|
||
|
p->phy.ops->autoneg_restart(&p->phy);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int cxgb3_phys_id(struct net_device *dev, u32 data)
|
||
|
{
|
||
|
struct port_info *pi = netdev_priv(dev);
|
||
|
struct adapter *adapter = pi->adapter;
|
||
|
int i;
|
||
|
|
||
|
if (data == 0)
|
||
|
data = 2;
|
||
|
|
||
|
for (i = 0; i < data * 2; i++) {
|
||
|
t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, F_GPIO0_OUT_VAL,
|
||
|
(i & 1) ? F_GPIO0_OUT_VAL : 0);
|
||
|
if (msleep_interruptible(500))
|
||
|
break;
|
||
|
}
|
||
|
t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, F_GPIO0_OUT_VAL,
|
||
|
F_GPIO0_OUT_VAL);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
||
|
{
|
||
|
struct port_info *p = netdev_priv(dev);
|
||
|
|
||
|
cmd->supported = p->link_config.supported;
|
||
|
cmd->advertising = p->link_config.advertising;
|
||
|
|
||
|
if (netif_carrier_ok(dev)) {
|
||
|
cmd->speed = p->link_config.speed;
|
||
|
cmd->duplex = p->link_config.duplex;
|
||
|
} else {
|
||
|
cmd->speed = -1;
|
||
|
cmd->duplex = -1;
|
||
|
}
|
||
|
|
||
|
cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE;
|
||
|
cmd->phy_address = p->phy.mdio.prtad;
|
||
|
cmd->transceiver = XCVR_EXTERNAL;
|
||
|
cmd->autoneg = p->link_config.autoneg;
|
||
|
cmd->maxtxpkt = 0;
|
||
|
cmd->maxrxpkt = 0;
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int speed_duplex_to_caps(int speed, int duplex)
|
||
|
{
|
||
|
int cap = 0;
|
||
|
|
||
|
switch (speed) {
|
||
|
case SPEED_10:
|
||
|
if (duplex == DUPLEX_FULL)
|
||
|
cap = SUPPORTED_10baseT_Full;
|
||
|
else
|
||
|
cap = SUPPORTED_10baseT_Half;
|
||
|
break;
|
||
|
case SPEED_100:
|
||
|
if (duplex == DUPLEX_FULL)
|
||
|
cap = SUPPORTED_100baseT_Full;
|
||
|
else
|
||
|
cap = SUPPORTED_100baseT_Half;
|
||
|
break;
|
||
|
case SPEED_1000:
|
||
|
if (duplex == DUPLEX_FULL)
|
||
|
cap = SUPPORTED_1000baseT_Full;
|
||
|
else
|
||
|
cap = SUPPORTED_1000baseT_Half;
|
||
|
break;
|
||
|
case SPEED_10000:
|
||
|
if (duplex == DUPLEX_FULL)
|
||
|
cap = SUPPORTED_10000baseT_Full;
|
||
|
}
|
||
|
return cap;
|
||
|
}
|
||
|
|
||
|
#define ADVERTISED_MASK (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | \
|
||
|
ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | \
|
||
|
ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full | \
|
||
|
ADVERTISED_10000baseT_Full)
|
||
|
|
||
|
static int set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
||
|
{
|
||
|
struct port_info *p = netdev_priv(dev);
|
||
|
struct link_config *lc = &p->link_config;
|
||
|
|
||
|
if (!(lc->supported & SUPPORTED_Autoneg)) {
|
||
|
/*
|
||
|
* PHY offers a single speed/duplex. See if that's what's
|
||
|
* being requested.
|
||
|
*/
|
||
|
if (cmd->autoneg == AUTONEG_DISABLE) {
|
||
|
int cap = speed_duplex_to_caps(cmd->speed, cmd->duplex);
|
||
|
if (lc->supported & cap)
|
||
|
return 0;
|
||
|
}
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
if (cmd->autoneg == AUTONEG_DISABLE) {
|
||
|
int cap = speed_duplex_to_caps(cmd->speed, cmd->duplex);
|
||
|
|
||
|
if (!(lc->supported & cap) || cmd->speed == SPEED_1000)
|
||
|
return -EINVAL;
|
||
|
lc->requested_speed = cmd->speed;
|
||
|
lc->requested_duplex = cmd->duplex;
|
||
|
lc->advertising = 0;
|
||
|
} else {
|
||
|
cmd->advertising &= ADVERTISED_MASK;
|
||
|
cmd->advertising &= lc->supported;
|
||
|
if (!cmd->advertising)
|
||
|
return -EINVAL;
|
||
|
lc->requested_speed = SPEED_INVALID;
|
||
|
lc->requested_duplex = DUPLEX_INVALID;
|
||
|
lc->advertising = cmd->advertising | ADVERTISED_Autoneg;
|
||
|
}
|
||
|
lc->autoneg = cmd->autoneg;
|
||
|
if (netif_running(dev))
|
||
|
t3_link_start(&p->phy, &p->mac, lc);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static void get_pauseparam(struct net_device *dev,
|
||
|
struct ethtool_pauseparam *epause)
|
||
|
{
|
||
|
struct port_info *p = netdev_priv(dev);
|
||
|
|
||
|
epause->autoneg = (p->link_config.requested_fc & PAUSE_AUTONEG) != 0;
|
||
|
epause->rx_pause = (p->link_config.fc & PAUSE_RX) != 0;
|
||
|
epause->tx_pause = (p->link_config.fc & PAUSE_TX) != 0;
|
||
|
}
|
||
|
|
||
|
static int set_pauseparam(struct net_device *dev,
|
||
|
struct ethtool_pauseparam *epause)
|
||
|
{
|
||
|
struct port_info *p = netdev_priv(dev);
|
||
|
struct link_config *lc = &p->link_config;
|
||
|
|
||
|
if (epause->autoneg == AUTONEG_DISABLE)
|
||
|
lc->requested_fc = 0;
|
||
|
else if (lc->supported & SUPPORTED_Autoneg)
|
||
|
lc->requested_fc = PAUSE_AUTONEG;
|
||
|
else
|
||
|
return -EINVAL;
|
||
|
|
||
|
if (epause->rx_pause)
|
||
|
lc->requested_fc |= PAUSE_RX;
|
||
|
if (epause->tx_pause)
|
||
|
lc->requested_fc |= PAUSE_TX;
|
||
|
if (lc->autoneg == AUTONEG_ENABLE) {
|
||
|
if (netif_running(dev))
|
||
|
t3_link_start(&p->phy, &p->mac, lc);
|
||
|
} else {
|
||
|
lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
|
||
|
if (netif_running(dev))
|
||
|
t3_mac_set_speed_duplex_fc(&p->mac, -1, -1, lc->fc);
|
||
|
}
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static u32 get_rx_csum(struct net_device *dev)
|
||
|
{
|
||
|
struct port_info *p = netdev_priv(dev);
|
||
|
|
||
|
return p->rx_offload & T3_RX_CSUM;
|
||
|
}
|
||
|
|
||
|
static int set_rx_csum(struct net_device *dev, u32 data)
|
||
|
{
|
||
|
struct port_info *p = netdev_priv(dev);
|
||
|
|
||
|
if (data) {
|
||
|
p->rx_offload |= T3_RX_CSUM;
|
||
|
} else {
|
||
|
int i;
|
||
|
|
||
|
p->rx_offload &= ~(T3_RX_CSUM | T3_LRO);
|
||
|
for (i = p->first_qset; i < p->first_qset + p->nqsets; i++)
|
||
|
set_qset_lro(dev, i, 0);
|
||
|
}
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static void get_sge_param(struct net_device *dev, struct ethtool_ringparam *e)
|
||
|
{
|
||
|
struct port_info *pi = netdev_priv(dev);
|
||
|
struct adapter *adapter = pi->adapter;
|
||
|
const struct qset_params *q = &adapter->params.sge.qset[pi->first_qset];
|
||
|
|
||
|
e->rx_max_pending = MAX_RX_BUFFERS;
|
||
|
e->rx_mini_max_pending = 0;
|
||
|
e->rx_jumbo_max_pending = MAX_RX_JUMBO_BUFFERS;
|
||
|
e->tx_max_pending = MAX_TXQ_ENTRIES;
|
||
|
|
||
|
e->rx_pending = q->fl_size;
|
||
|
e->rx_mini_pending = q->rspq_size;
|
||
|
e->rx_jumbo_pending = q->jumbo_size;
|
||
|
e->tx_pending = q->txq_size[0];
|
||
|
}
|
||
|
|
||
|
static int set_sge_param(struct net_device *dev, struct ethtool_ringparam *e)
|
||
|
{
|
||
|
struct port_info *pi = netdev_priv(dev);
|
||
|
struct adapter *adapter = pi->adapter;
|
||
|
struct qset_params *q;
|
||
|
int i;
|
||
|
|
||
|
if (e->rx_pending > MAX_RX_BUFFERS ||
|
||
|
e->rx_jumbo_pending > MAX_RX_JUMBO_BUFFERS ||
|
||
|
e->tx_pending > MAX_TXQ_ENTRIES ||
|
||
|
e->rx_mini_pending > MAX_RSPQ_ENTRIES ||
|
||
|
e->rx_mini_pending < MIN_RSPQ_ENTRIES ||
|
||
|
e->rx_pending < MIN_FL_ENTRIES ||
|
||
|
e->rx_jumbo_pending < MIN_FL_ENTRIES ||
|
||
|
e->tx_pending < adapter->params.nports * MIN_TXQ_ENTRIES)
|
||
|
return -EINVAL;
|
||
|
|
||
|
if (adapter->flags & FULL_INIT_DONE)
|
||
|
return -EBUSY;
|
||
|
|
||
|
q = &adapter->params.sge.qset[pi->first_qset];
|
||
|
for (i = 0; i < pi->nqsets; ++i, ++q) {
|
||
|
q->rspq_size = e->rx_mini_pending;
|
||
|
q->fl_size = e->rx_pending;
|
||
|
q->jumbo_size = e->rx_jumbo_pending;
|
||
|
q->txq_size[0] = e->tx_pending;
|
||
|
q->txq_size[1] = e->tx_pending;
|
||
|
q->txq_size[2] = e->tx_pending;
|
||
|
}
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int set_coalesce(struct net_device *dev, struct ethtool_coalesce *c)
|
||
|
{
|
||
|
struct port_info *pi = netdev_priv(dev);
|
||
|
struct adapter *adapter = pi->adapter;
|
||
|
struct qset_params *qsp = &adapter->params.sge.qset[0];
|
||
|
struct sge_qset *qs = &adapter->sge.qs[0];
|
||
|
|
||
|
if (c->rx_coalesce_usecs * 10 > M_NEWTIMER)
|
||
|
return -EINVAL;
|
||
|
|
||
|
qsp->coalesce_usecs = c->rx_coalesce_usecs;
|
||
|
t3_update_qset_coalesce(qs, qsp);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c)
|
||
|
{
|
||
|
struct port_info *pi = netdev_priv(dev);
|
||
|
struct adapter *adapter = pi->adapter;
|
||
|
struct qset_params *q = adapter->params.sge.qset;
|
||
|
|
||
|
c->rx_coalesce_usecs = q->coalesce_usecs;
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int get_eeprom(struct net_device *dev, struct ethtool_eeprom *e,
|
||
|
u8 * data)
|
||
|
{
|
||
|
struct port_info *pi = netdev_priv(dev);
|
||
|
struct adapter *adapter = pi->adapter;
|
||
|
int i, err = 0;
|
||
|
|
||
|
u8 *buf = kmalloc(EEPROMSIZE, GFP_KERNEL);
|
||
|
if (!buf)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
e->magic = EEPROM_MAGIC;
|
||
|
for (i = e->offset & ~3; !err && i < e->offset + e->len; i += 4)
|
||
|
err = t3_seeprom_read(adapter, i, (__le32 *) & buf[i]);
|
||
|
|
||
|
if (!err)
|
||
|
memcpy(data, buf + e->offset, e->len);
|
||
|
kfree(buf);
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
static int set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
|
||
|
u8 * data)
|
||
|
{
|
||
|
struct port_info *pi = netdev_priv(dev);
|
||
|
struct adapter *adapter = pi->adapter;
|
||
|
u32 aligned_offset, aligned_len;
|
||
|
__le32 *p;
|
||
|
u8 *buf;
|
||
|
int err;
|
||
|
|
||
|
if (eeprom->magic != EEPROM_MAGIC)
|
||
|
return -EINVAL;
|
||
|
|
||
|
aligned_offset = eeprom->offset & ~3;
|
||
|
aligned_len = (eeprom->len + (eeprom->offset & 3) + 3) & ~3;
|
||
|
|
||
|
if (aligned_offset != eeprom->offset || aligned_len != eeprom->len) {
|
||
|
buf = kmalloc(aligned_len, GFP_KERNEL);
|
||
|
if (!buf)
|
||
|
return -ENOMEM;
|
||
|
err = t3_seeprom_read(adapter, aligned_offset, (__le32 *) buf);
|
||
|
if (!err && aligned_len > 4)
|
||
|
err = t3_seeprom_read(adapter,
|
||
|
aligned_offset + aligned_len - 4,
|
||
|
(__le32 *) & buf[aligned_len - 4]);
|
||
|
if (err)
|
||
|
goto out;
|
||
|
memcpy(buf + (eeprom->offset & 3), data, eeprom->len);
|
||
|
} else
|
||
|
buf = data;
|
||
|
|
||
|
err = t3_seeprom_wp(adapter, 0);
|
||
|
if (err)
|
||
|
goto out;
|
||
|
|
||
|
for (p = (__le32 *) buf; !err && aligned_len; aligned_len -= 4, p++) {
|
||
|
err = t3_seeprom_write(adapter, aligned_offset, *p);
|
||
|
aligned_offset += 4;
|
||
|
}
|
||
|
|
||
|
if (!err)
|
||
|
err = t3_seeprom_wp(adapter, 1);
|
||
|
out:
|
||
|
if (buf != data)
|
||
|
kfree(buf);
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
static void get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
|
||
|
{
|
||
|
wol->supported = 0;
|
||
|
wol->wolopts = 0;
|
||
|
memset(&wol->sopass, 0, sizeof(wol->sopass));
|
||
|
}
|
||
|
|
||
|
static const struct ethtool_ops cxgb_ethtool_ops = {
|
||
|
.get_settings = get_settings,
|
||
|
.set_settings = set_settings,
|
||
|
.get_drvinfo = get_drvinfo,
|
||
|
.get_msglevel = get_msglevel,
|
||
|
.set_msglevel = set_msglevel,
|
||
|
.get_ringparam = get_sge_param,
|
||
|
.set_ringparam = set_sge_param,
|
||
|
.get_coalesce = get_coalesce,
|
||
|
.set_coalesce = set_coalesce,
|
||
|
.get_eeprom_len = get_eeprom_len,
|
||
|
.get_eeprom = get_eeprom,
|
||
|
.set_eeprom = set_eeprom,
|
||
|
.get_pauseparam = get_pauseparam,
|
||
|
.set_pauseparam = set_pauseparam,
|
||
|
.get_rx_csum = get_rx_csum,
|
||
|
.set_rx_csum = set_rx_csum,
|
||
|
.set_tx_csum = ethtool_op_set_tx_csum,
|
||
|
.set_sg = ethtool_op_set_sg,
|
||
|
.get_link = ethtool_op_get_link,
|
||
|
.get_strings = get_strings,
|
||
|
.phys_id = cxgb3_phys_id,
|
||
|
.nway_reset = restart_autoneg,
|
||
|
.get_sset_count = get_sset_count,
|
||
|
.get_ethtool_stats = get_stats,
|
||
|
.get_regs_len = get_regs_len,
|
||
|
.get_regs = get_regs,
|
||
|
.get_wol = get_wol,
|
||
|
.set_tso = ethtool_op_set_tso,
|
||
|
};
|
||
|
|
||
|
static int in_range(int val, int lo, int hi)
|
||
|
{
|
||
|
return val < 0 || (val <= hi && val >= lo);
|
||
|
}
|
||
|
|
||
|
static int cxgb_extension_ioctl(struct net_device *dev, void __user *useraddr)
|
||
|
{
|
||
|
struct port_info *pi = netdev_priv(dev);
|
||
|
struct adapter *adapter = pi->adapter;
|
||
|
u32 cmd;
|
||
|
int ret;
|
||
|
|
||
|
if (copy_from_user(&cmd, useraddr, sizeof(cmd)))
|
||
|
return -EFAULT;
|
||
|
|
||
|
switch (cmd) {
|
||
|
case CHELSIO_SET_QSET_PARAMS:{
|
||
|
int i;
|
||
|
struct qset_params *q;
|
||
|
struct ch_qset_params t;
|
||
|
int q1 = pi->first_qset;
|
||
|
int nqsets = pi->nqsets;
|
||
|
|
||
|
if (!capable(CAP_NET_ADMIN))
|
||
|
return -EPERM;
|
||
|
if (copy_from_user(&t, useraddr, sizeof(t)))
|
||
|
return -EFAULT;
|
||
|
if (t.qset_idx >= SGE_QSETS)
|
||
|
return -EINVAL;
|
||
|
if (!in_range(t.intr_lat, 0, M_NEWTIMER) ||
|
||
|
!in_range(t.cong_thres, 0, 255) ||
|
||
|
!in_range(t.txq_size[0], MIN_TXQ_ENTRIES,
|
||
|
MAX_TXQ_ENTRIES) ||
|
||
|
!in_range(t.txq_size[1], MIN_TXQ_ENTRIES,
|
||
|
MAX_TXQ_ENTRIES) ||
|
||
|
!in_range(t.txq_size[2], MIN_CTRL_TXQ_ENTRIES,
|
||
|
MAX_CTRL_TXQ_ENTRIES) ||
|
||
|
!in_range(t.fl_size[0], MIN_FL_ENTRIES,
|
||
|
MAX_RX_BUFFERS)
|
||
|
|| !in_range(t.fl_size[1], MIN_FL_ENTRIES,
|
||
|
MAX_RX_JUMBO_BUFFERS)
|
||
|
|| !in_range(t.rspq_size, MIN_RSPQ_ENTRIES,
|
||
|
MAX_RSPQ_ENTRIES))
|
||
|
return -EINVAL;
|
||
|
|
||
|
if ((adapter->flags & FULL_INIT_DONE) && t.lro > 0)
|
||
|
for_each_port(adapter, i) {
|
||
|
pi = adap2pinfo(adapter, i);
|
||
|
if (t.qset_idx >= pi->first_qset &&
|
||
|
t.qset_idx < pi->first_qset + pi->nqsets &&
|
||
|
!(pi->rx_offload & T3_RX_CSUM))
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
if ((adapter->flags & FULL_INIT_DONE) &&
|
||
|
(t.rspq_size >= 0 || t.fl_size[0] >= 0 ||
|
||
|
t.fl_size[1] >= 0 || t.txq_size[0] >= 0 ||
|
||
|
t.txq_size[1] >= 0 || t.txq_size[2] >= 0 ||
|
||
|
t.polling >= 0 || t.cong_thres >= 0))
|
||
|
return -EBUSY;
|
||
|
|
||
|
/* Allow setting of any available qset when offload enabled */
|
||
|
if (test_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map)) {
|
||
|
q1 = 0;
|
||
|
for_each_port(adapter, i) {
|
||
|
pi = adap2pinfo(adapter, i);
|
||
|
nqsets += pi->first_qset + pi->nqsets;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
if (t.qset_idx < q1)
|
||
|
return -EINVAL;
|
||
|
if (t.qset_idx > q1 + nqsets - 1)
|
||
|
return -EINVAL;
|
||
|
|
||
|
q = &adapter->params.sge.qset[t.qset_idx];
|
||
|
|
||
|
if (t.rspq_size >= 0)
|
||
|
q->rspq_size = t.rspq_size;
|
||
|
if (t.fl_size[0] >= 0)
|
||
|
q->fl_size = t.fl_size[0];
|
||
|
if (t.fl_size[1] >= 0)
|
||
|
q->jumbo_size = t.fl_size[1];
|
||
|
if (t.txq_size[0] >= 0)
|
||
|
q->txq_size[0] = t.txq_size[0];
|
||
|
if (t.txq_size[1] >= 0)
|
||
|
q->txq_size[1] = t.txq_size[1];
|
||
|
if (t.txq_size[2] >= 0)
|
||
|
q->txq_size[2] = t.txq_size[2];
|
||
|
if (t.cong_thres >= 0)
|
||
|
q->cong_thres = t.cong_thres;
|
||
|
if (t.intr_lat >= 0) {
|
||
|
struct sge_qset *qs =
|
||
|
&adapter->sge.qs[t.qset_idx];
|
||
|
|
||
|
q->coalesce_usecs = t.intr_lat;
|
||
|
t3_update_qset_coalesce(qs, q);
|
||
|
}
|
||
|
if (t.polling >= 0) {
|
||
|
if (adapter->flags & USING_MSIX)
|
||
|
q->polling = t.polling;
|
||
|
else {
|
||
|
/* No polling with INTx for T3A */
|
||
|
if (adapter->params.rev == 0 &&
|
||
|
!(adapter->flags & USING_MSI))
|
||
|
t.polling = 0;
|
||
|
|
||
|
for (i = 0; i < SGE_QSETS; i++) {
|
||
|
q = &adapter->params.sge.
|
||
|
qset[i];
|
||
|
q->polling = t.polling;
|
||
|
}
|
||
|
}
|
||
|
}
|
||
|
if (t.lro >= 0)
|
||
|
set_qset_lro(dev, t.qset_idx, t.lro);
|
||
|
|
||
|
break;
|
||
|
}
|
||
|
case CHELSIO_GET_QSET_PARAMS:{
|
||
|
struct qset_params *q;
|
||
|
struct ch_qset_params t;
|
||
|
int q1 = pi->first_qset;
|
||
|
int nqsets = pi->nqsets;
|
||
|
int i;
|
||
|
|
||
|
if (copy_from_user(&t, useraddr, sizeof(t)))
|
||
|
return -EFAULT;
|
||
|
|
||
|
/* Display qsets for all ports when offload enabled */
|
||
|
if (test_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map)) {
|
||
|
q1 = 0;
|
||
|
for_each_port(adapter, i) {
|
||
|
pi = adap2pinfo(adapter, i);
|
||
|
nqsets = pi->first_qset + pi->nqsets;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
if (t.qset_idx >= nqsets)
|
||
|
return -EINVAL;
|
||
|
|
||
|
q = &adapter->params.sge.qset[q1 + t.qset_idx];
|
||
|
t.rspq_size = q->rspq_size;
|
||
|
t.txq_size[0] = q->txq_size[0];
|
||
|
t.txq_size[1] = q->txq_size[1];
|
||
|
t.txq_size[2] = q->txq_size[2];
|
||
|
t.fl_size[0] = q->fl_size;
|
||
|
t.fl_size[1] = q->jumbo_size;
|
||
|
t.polling = q->polling;
|
||
|
t.lro = q->lro;
|
||
|
t.intr_lat = q->coalesce_usecs;
|
||
|
t.cong_thres = q->cong_thres;
|
||
|
t.qnum = q1;
|
||
|
|
||
|
if (adapter->flags & USING_MSIX)
|
||
|
t.vector = adapter->msix_info[q1 + t.qset_idx + 1].vec;
|
||
|
else
|
||
|
t.vector = adapter->pdev->irq;
|
||
|
|
||
|
if (copy_to_user(useraddr, &t, sizeof(t)))
|
||
|
return -EFAULT;
|
||
|
break;
|
||
|
}
|
||
|
case CHELSIO_SET_QSET_NUM:{
|
||
|
struct ch_reg edata;
|
||
|
unsigned int i, first_qset = 0, other_qsets = 0;
|
||
|
|
||
|
if (!capable(CAP_NET_ADMIN))
|
||
|
return -EPERM;
|
||
|
if (adapter->flags & FULL_INIT_DONE)
|
||
|
return -EBUSY;
|
||
|
if (copy_from_user(&edata, useraddr, sizeof(edata)))
|
||
|
return -EFAULT;
|
||
|
if (edata.val < 1 ||
|
||
|
(edata.val > 1 && !(adapter->flags & USING_MSIX)))
|
||
|
return -EINVAL;
|
||
|
|
||
|
for_each_port(adapter, i)
|
||
|
if (adapter->port[i] && adapter->port[i] != dev)
|
||
|
other_qsets += adap2pinfo(adapter, i)->nqsets;
|
||
|
|
||
|
if (edata.val + other_qsets > SGE_QSETS)
|
||
|
return -EINVAL;
|
||
|
|
||
|
pi->nqsets = edata.val;
|
||
|
|
||
|
for_each_port(adapter, i)
|
||
|
if (adapter->port[i]) {
|
||
|
pi = adap2pinfo(adapter, i);
|
||
|
pi->first_qset = first_qset;
|
||
|
first_qset += pi->nqsets;
|
||
|
}
|
||
|
break;
|
||
|
}
|
||
|
case CHELSIO_GET_QSET_NUM:{
|
||
|
struct ch_reg edata;
|
||
|
|
||
|
memset(&edata, 0, sizeof(struct ch_reg));
|
||
|
|
||
|
edata.cmd = CHELSIO_GET_QSET_NUM;
|
||
|
edata.val = pi->nqsets;
|
||
|
if (copy_to_user(useraddr, &edata, sizeof(edata)))
|
||
|
return -EFAULT;
|
||
|
break;
|
||
|
}
|
||
|
case CHELSIO_LOAD_FW:{
|
||
|
u8 *fw_data;
|
||
|
struct ch_mem_range t;
|
||
|
|
||
|
if (!capable(CAP_SYS_RAWIO))
|
||
|
return -EPERM;
|
||
|
if (copy_from_user(&t, useraddr, sizeof(t)))
|
||
|
return -EFAULT;
|
||
|
/* Check t.len sanity ? */
|
||
|
fw_data = kmalloc(t.len, GFP_KERNEL);
|
||
|
if (!fw_data)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
if (copy_from_user
|
||
|
(fw_data, useraddr + sizeof(t), t.len)) {
|
||
|
kfree(fw_data);
|
||
|
return -EFAULT;
|
||
|
}
|
||
|
|
||
|
ret = t3_load_fw(adapter, fw_data, t.len);
|
||
|
kfree(fw_data);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
break;
|
||
|
}
|
||
|
case CHELSIO_SETMTUTAB:{
|
||
|
struct ch_mtus m;
|
||
|
int i;
|
||
|
|
||
|
if (!is_offload(adapter))
|
||
|
return -EOPNOTSUPP;
|
||
|
if (!capable(CAP_NET_ADMIN))
|
||
|
return -EPERM;
|
||
|
if (offload_running(adapter))
|
||
|
return -EBUSY;
|
||
|
if (copy_from_user(&m, useraddr, sizeof(m)))
|
||
|
return -EFAULT;
|
||
|
if (m.nmtus != NMTUS)
|
||
|
return -EINVAL;
|
||
|
if (m.mtus[0] < 81) /* accommodate SACK */
|
||
|
return -EINVAL;
|
||
|
|
||
|
/* MTUs must be in ascending order */
|
||
|
for (i = 1; i < NMTUS; ++i)
|
||
|
if (m.mtus[i] < m.mtus[i - 1])
|
||
|
return -EINVAL;
|
||
|
|
||
|
memcpy(adapter->params.mtus, m.mtus,
|
||
|
sizeof(adapter->params.mtus));
|
||
|
break;
|
||
|
}
|
||
|
case CHELSIO_GET_PM:{
|
||
|
struct tp_params *p = &adapter->params.tp;
|
||
|
struct ch_pm m = {.cmd = CHELSIO_GET_PM };
|
||
|
|
||
|
if (!is_offload(adapter))
|
||
|
return -EOPNOTSUPP;
|
||
|
m.tx_pg_sz = p->tx_pg_size;
|
||
|
m.tx_num_pg = p->tx_num_pgs;
|
||
|
m.rx_pg_sz = p->rx_pg_size;
|
||
|
m.rx_num_pg = p->rx_num_pgs;
|
||
|
m.pm_total = p->pmtx_size + p->chan_rx_size * p->nchan;
|
||
|
if (copy_to_user(useraddr, &m, sizeof(m)))
|
||
|
return -EFAULT;
|
||
|
break;
|
||
|
}
|
||
|
case CHELSIO_SET_PM:{
|
||
|
struct ch_pm m;
|
||
|
struct tp_params *p = &adapter->params.tp;
|
||
|
|
||
|
if (!is_offload(adapter))
|
||
|
return -EOPNOTSUPP;
|
||
|
if (!capable(CAP_NET_ADMIN))
|
||
|
return -EPERM;
|
||
|
if (adapter->flags & FULL_INIT_DONE)
|
||
|
return -EBUSY;
|
||
|
if (copy_from_user(&m, useraddr, sizeof(m)))
|
||
|
return -EFAULT;
|
||
|
if (!is_power_of_2(m.rx_pg_sz) ||
|
||
|
!is_power_of_2(m.tx_pg_sz))
|
||
|
return -EINVAL; /* not power of 2 */
|
||
|
if (!(m.rx_pg_sz & 0x14000))
|
||
|
return -EINVAL; /* not 16KB or 64KB */
|
||
|
if (!(m.tx_pg_sz & 0x1554000))
|
||
|
return -EINVAL;
|
||
|
if (m.tx_num_pg == -1)
|
||
|
m.tx_num_pg = p->tx_num_pgs;
|
||
|
if (m.rx_num_pg == -1)
|
||
|
m.rx_num_pg = p->rx_num_pgs;
|
||
|
if (m.tx_num_pg % 24 || m.rx_num_pg % 24)
|
||
|
return -EINVAL;
|
||
|
if (m.rx_num_pg * m.rx_pg_sz > p->chan_rx_size ||
|
||
|
m.tx_num_pg * m.tx_pg_sz > p->chan_tx_size)
|
||
|
return -EINVAL;
|
||
|
p->rx_pg_size = m.rx_pg_sz;
|
||
|
p->tx_pg_size = m.tx_pg_sz;
|
||
|
p->rx_num_pgs = m.rx_num_pg;
|
||
|
p->tx_num_pgs = m.tx_num_pg;
|
||
|
break;
|
||
|
}
|
||
|
case CHELSIO_GET_MEM:{
|
||
|
struct ch_mem_range t;
|
||
|
struct mc7 *mem;
|
||
|
u64 buf[32];
|
||
|
|
||
|
if (!is_offload(adapter))
|
||
|
return -EOPNOTSUPP;
|
||
|
if (!(adapter->flags & FULL_INIT_DONE))
|
||
|
return -EIO; /* need the memory controllers */
|
||
|
if (copy_from_user(&t, useraddr, sizeof(t)))
|
||
|
return -EFAULT;
|
||
|
if ((t.addr & 7) || (t.len & 7))
|
||
|
return -EINVAL;
|
||
|
if (t.mem_id == MEM_CM)
|
||
|
mem = &adapter->cm;
|
||
|
else if (t.mem_id == MEM_PMRX)
|
||
|
mem = &adapter->pmrx;
|
||
|
else if (t.mem_id == MEM_PMTX)
|
||
|
mem = &adapter->pmtx;
|
||
|
else
|
||
|
return -EINVAL;
|
||
|
|
||
|
/*
|
||
|
* Version scheme:
|
||
|
* bits 0..9: chip version
|
||
|
* bits 10..15: chip revision
|
||
|
*/
|
||
|
t.version = 3 | (adapter->params.rev << 10);
|
||
|
if (copy_to_user(useraddr, &t, sizeof(t)))
|
||
|
return -EFAULT;
|
||
|
|
||
|
/*
|
||
|
* Read 256 bytes at a time as len can be large and we don't
|
||
|
* want to use huge intermediate buffers.
|
||
|
*/
|
||
|
useraddr += sizeof(t); /* advance to start of buffer */
|
||
|
while (t.len) {
|
||
|
unsigned int chunk =
|
||
|
min_t(unsigned int, t.len, sizeof(buf));
|
||
|
|
||
|
ret =
|
||
|
t3_mc7_bd_read(mem, t.addr / 8, chunk / 8,
|
||
|
buf);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
if (copy_to_user(useraddr, buf, chunk))
|
||
|
return -EFAULT;
|
||
|
useraddr += chunk;
|
||
|
t.addr += chunk;
|
||
|
t.len -= chunk;
|
||
|
}
|
||
|
break;
|
||
|
}
|
||
|
case CHELSIO_SET_TRACE_FILTER:{
|
||
|
struct ch_trace t;
|
||
|
const struct trace_params *tp;
|
||
|
|
||
|
if (!capable(CAP_NET_ADMIN))
|
||
|
return -EPERM;
|
||
|
if (!offload_running(adapter))
|
||
|
return -EAGAIN;
|
||
|
if (copy_from_user(&t, useraddr, sizeof(t)))
|
||
|
return -EFAULT;
|
||
|
|
||
|
tp = (const struct trace_params *)&t.sip;
|
||
|
if (t.config_tx)
|
||
|
t3_config_trace_filter(adapter, tp, 0,
|
||
|
t.invert_match,
|
||
|
t.trace_tx);
|
||
|
if (t.config_rx)
|
||
|
t3_config_trace_filter(adapter, tp, 1,
|
||
|
t.invert_match,
|
||
|
t.trace_rx);
|
||
|
break;
|
||
|
}
|
||
|
default:
|
||
|
return -EOPNOTSUPP;
|
||
|
}
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int cxgb_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
|
||
|
{
|
||
|
struct mii_ioctl_data *data = if_mii(req);
|
||
|
struct port_info *pi = netdev_priv(dev);
|
||
|
struct adapter *adapter = pi->adapter;
|
||
|
|
||
|
switch (cmd) {
|
||
|
case SIOCGMIIREG:
|
||
|
case SIOCSMIIREG:
|
||
|
/* Convert phy_id from older PRTAD/DEVAD format */
|
||
|
if (is_10G(adapter) &&
|
||
|
!mdio_phy_id_is_c45(data->phy_id) &&
|
||
|
(data->phy_id & 0x1f00) &&
|
||
|
!(data->phy_id & 0xe0e0))
|
||
|
data->phy_id = mdio_phy_id_c45(data->phy_id >> 8,
|
||
|
data->phy_id & 0x1f);
|
||
|
/* FALLTHRU */
|
||
|
case SIOCGMIIPHY:
|
||
|
return mdio_mii_ioctl(&pi->phy.mdio, data, cmd);
|
||
|
case SIOCCHIOCTL:
|
||
|
return cxgb_extension_ioctl(dev, req->ifr_data);
|
||
|
default:
|
||
|
return -EOPNOTSUPP;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static int cxgb_change_mtu(struct net_device *dev, int new_mtu)
|
||
|
{
|
||
|
struct port_info *pi = netdev_priv(dev);
|
||
|
struct adapter *adapter = pi->adapter;
|
||
|
int ret;
|
||
|
|
||
|
if (new_mtu < 81) /* accommodate SACK */
|
||
|
return -EINVAL;
|
||
|
if ((ret = t3_mac_set_mtu(&pi->mac, new_mtu)))
|
||
|
return ret;
|
||
|
dev->mtu = new_mtu;
|
||
|
init_port_mtus(adapter);
|
||
|
if (adapter->params.rev == 0 && offload_running(adapter))
|
||
|
t3_load_mtus(adapter, adapter->params.mtus,
|
||
|
adapter->params.a_wnd, adapter->params.b_wnd,
|
||
|
adapter->port[0]->mtu);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int cxgb_set_mac_addr(struct net_device *dev, void *p)
|
||
|
{
|
||
|
struct port_info *pi = netdev_priv(dev);
|
||
|
struct adapter *adapter = pi->adapter;
|
||
|
struct sockaddr *addr = p;
|
||
|
|
||
|
if (!is_valid_ether_addr(addr->sa_data))
|
||
|
return -EINVAL;
|
||
|
|
||
|
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
|
||
|
t3_mac_set_address(&pi->mac, 0, dev->dev_addr);
|
||
|
if (offload_running(adapter))
|
||
|
write_smt_entry(adapter, pi->port_id);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* t3_synchronize_rx - wait for current Rx processing on a port to complete
|
||
|
* @adap: the adapter
|
||
|
* @p: the port
|
||
|
*
|
||
|
* Ensures that current Rx processing on any of the queues associated with
|
||
|
* the given port completes before returning. We do this by acquiring and
|
||
|
* releasing the locks of the response queues associated with the port.
|
||
|
*/
|
||
|
static void t3_synchronize_rx(struct adapter *adap, const struct port_info *p)
|
||
|
{
|
||
|
int i;
|
||
|
|
||
|
for (i = p->first_qset; i < p->first_qset + p->nqsets; i++) {
|
||
|
struct sge_rspq *q = &adap->sge.qs[i].rspq;
|
||
|
|
||
|
spin_lock_irq(&q->lock);
|
||
|
spin_unlock_irq(&q->lock);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static void vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
|
||
|
{
|
||
|
struct port_info *pi = netdev_priv(dev);
|
||
|
struct adapter *adapter = pi->adapter;
|
||
|
|
||
|
pi->vlan_grp = grp;
|
||
|
if (adapter->params.rev > 0)
|
||
|
t3_set_vlan_accel(adapter, 1 << pi->port_id, grp != NULL);
|
||
|
else {
|
||
|
/* single control for all ports */
|
||
|
unsigned int i, have_vlans = 0;
|
||
|
for_each_port(adapter, i)
|
||
|
have_vlans |= adap2pinfo(adapter, i)->vlan_grp != NULL;
|
||
|
|
||
|
t3_set_vlan_accel(adapter, 1, have_vlans);
|
||
|
}
|
||
|
t3_synchronize_rx(adapter, pi);
|
||
|
}
|
||
|
|
||
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
||
|
static void cxgb_netpoll(struct net_device *dev)
|
||
|
{
|
||
|
struct port_info *pi = netdev_priv(dev);
|
||
|
struct adapter *adapter = pi->adapter;
|
||
|
int qidx;
|
||
|
|
||
|
for (qidx = pi->first_qset; qidx < pi->first_qset + pi->nqsets; qidx++) {
|
||
|
struct sge_qset *qs = &adapter->sge.qs[qidx];
|
||
|
void *source;
|
||
|
|
||
|
if (adapter->flags & USING_MSIX)
|
||
|
source = qs;
|
||
|
else
|
||
|
source = adapter;
|
||
|
|
||
|
t3_intr_handler(adapter, qs->rspq.polling) (0, source);
|
||
|
}
|
||
|
}
|
||
|
#endif
|
||
|
|
||
|
/*
|
||
|
* Periodic accumulation of MAC statistics.
|
||
|
*/
|
||
|
static void mac_stats_update(struct adapter *adapter)
|
||
|
{
|
||
|
int i;
|
||
|
|
||
|
for_each_port(adapter, i) {
|
||
|
struct net_device *dev = adapter->port[i];
|
||
|
struct port_info *p = netdev_priv(dev);
|
||
|
|
||
|
if (netif_running(dev)) {
|
||
|
spin_lock(&adapter->stats_lock);
|
||
|
t3_mac_update_stats(&p->mac);
|
||
|
spin_unlock(&adapter->stats_lock);
|
||
|
}
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static void check_link_status(struct adapter *adapter)
|
||
|
{
|
||
|
int i;
|
||
|
|
||
|
for_each_port(adapter, i) {
|
||
|
struct net_device *dev = adapter->port[i];
|
||
|
struct port_info *p = netdev_priv(dev);
|
||
|
int link_fault;
|
||
|
|
||
|
spin_lock_irq(&adapter->work_lock);
|
||
|
link_fault = p->link_fault;
|
||
|
spin_unlock_irq(&adapter->work_lock);
|
||
|
|
||
|
if (link_fault) {
|
||
|
t3_link_fault(adapter, i);
|
||
|
continue;
|
||
|
}
|
||
|
|
||
|
if (!(p->phy.caps & SUPPORTED_IRQ) && netif_running(dev)) {
|
||
|
t3_xgm_intr_disable(adapter, i);
|
||
|
t3_read_reg(adapter, A_XGM_INT_STATUS + p->mac.offset);
|
||
|
|
||
|
t3_link_changed(adapter, i);
|
||
|
t3_xgm_intr_enable(adapter, i);
|
||
|
}
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static void check_t3b2_mac(struct adapter *adapter)
|
||
|
{
|
||
|
int i;
|
||
|
|
||
|
if (!rtnl_trylock()) /* synchronize with ifdown */
|
||
|
return;
|
||
|
|
||
|
for_each_port(adapter, i) {
|
||
|
struct net_device *dev = adapter->port[i];
|
||
|
struct port_info *p = netdev_priv(dev);
|
||
|
int status;
|
||
|
|
||
|
if (!netif_running(dev))
|
||
|
continue;
|
||
|
|
||
|
status = 0;
|
||
|
if (netif_running(dev) && netif_carrier_ok(dev))
|
||
|
status = t3b2_mac_watchdog_task(&p->mac);
|
||
|
if (status == 1)
|
||
|
p->mac.stats.num_toggled++;
|
||
|
else if (status == 2) {
|
||
|
struct cmac *mac = &p->mac;
|
||
|
|
||
|
t3_mac_set_mtu(mac, dev->mtu);
|
||
|
t3_mac_set_address(mac, 0, dev->dev_addr);
|
||
|
cxgb_set_rxmode(dev);
|
||
|
t3_link_start(&p->phy, mac, &p->link_config);
|
||
|
t3_mac_enable(mac, MAC_DIRECTION_RX | MAC_DIRECTION_TX);
|
||
|
t3_port_intr_enable(adapter, p->port_id);
|
||
|
p->mac.stats.num_resets++;
|
||
|
}
|
||
|
}
|
||
|
rtnl_unlock();
|
||
|
}
|
||
|
|
||
|
|
||
|
static void t3_adap_check_task(struct work_struct *work)
|
||
|
{
|
||
|
struct adapter *adapter = container_of(work, struct adapter,
|
||
|
adap_check_task.work);
|
||
|
const struct adapter_params *p = &adapter->params;
|
||
|
int port;
|
||
|
unsigned int v, status, reset;
|
||
|
|
||
|
adapter->check_task_cnt++;
|
||
|
|
||
|
check_link_status(adapter);
|
||
|
|
||
|
/* Accumulate MAC stats if needed */
|
||
|
if (!p->linkpoll_period ||
|
||
|
(adapter->check_task_cnt * p->linkpoll_period) / 10 >=
|
||
|
p->stats_update_period) {
|
||
|
mac_stats_update(adapter);
|
||
|
adapter->check_task_cnt = 0;
|
||
|
}
|
||
|
|
||
|
if (p->rev == T3_REV_B2)
|
||
|
check_t3b2_mac(adapter);
|
||
|
|
||
|
/*
|
||
|
* Scan the XGMAC's to check for various conditions which we want to
|
||
|
* monitor in a periodic polling manner rather than via an interrupt
|
||
|
* condition. This is used for conditions which would otherwise flood
|
||
|
* the system with interrupts and we only really need to know that the
|
||
|
* conditions are "happening" ... For each condition we count the
|
||
|
* detection of the condition and reset it for the next polling loop.
|
||
|
*/
|
||
|
for_each_port(adapter, port) {
|
||
|
struct cmac *mac = &adap2pinfo(adapter, port)->mac;
|
||
|
u32 cause;
|
||
|
|
||
|
cause = t3_read_reg(adapter, A_XGM_INT_CAUSE + mac->offset);
|
||
|
reset = 0;
|
||
|
if (cause & F_RXFIFO_OVERFLOW) {
|
||
|
mac->stats.rx_fifo_ovfl++;
|
||
|
reset |= F_RXFIFO_OVERFLOW;
|
||
|
}
|
||
|
|
||
|
t3_write_reg(adapter, A_XGM_INT_CAUSE + mac->offset, reset);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* We do the same as above for FL_EMPTY interrupts.
|
||
|
*/
|
||
|
status = t3_read_reg(adapter, A_SG_INT_CAUSE);
|
||
|
reset = 0;
|
||
|
|
||
|
if (status & F_FLEMPTY) {
|
||
|
struct sge_qset *qs = &adapter->sge.qs[0];
|
||
|
int i = 0;
|
||
|
|
||
|
reset |= F_FLEMPTY;
|
||
|
|
||
|
v = (t3_read_reg(adapter, A_SG_RSPQ_FL_STATUS) >> S_FL0EMPTY) &
|
||
|
0xffff;
|
||
|
|
||
|
while (v) {
|
||
|
qs->fl[i].empty += (v & 1);
|
||
|
if (i)
|
||
|
qs++;
|
||
|
i ^= 1;
|
||
|
v >>= 1;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
t3_write_reg(adapter, A_SG_INT_CAUSE, reset);
|
||
|
|
||
|
/* Schedule the next check update if any port is active. */
|
||
|
spin_lock_irq(&adapter->work_lock);
|
||
|
if (adapter->open_device_map & PORT_MASK)
|
||
|
schedule_chk_task(adapter);
|
||
|
spin_unlock_irq(&adapter->work_lock);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Processes external (PHY) interrupts in process context.
|
||
|
*/
|
||
|
static void ext_intr_task(struct work_struct *work)
|
||
|
{
|
||
|
struct adapter *adapter = container_of(work, struct adapter,
|
||
|
ext_intr_handler_task);
|
||
|
int i;
|
||
|
|
||
|
/* Disable link fault interrupts */
|
||
|
for_each_port(adapter, i) {
|
||
|
struct net_device *dev = adapter->port[i];
|
||
|
struct port_info *p = netdev_priv(dev);
|
||
|
|
||
|
t3_xgm_intr_disable(adapter, i);
|
||
|
t3_read_reg(adapter, A_XGM_INT_STATUS + p->mac.offset);
|
||
|
}
|
||
|
|
||
|
/* Re-enable link fault interrupts */
|
||
|
t3_phy_intr_handler(adapter);
|
||
|
|
||
|
for_each_port(adapter, i)
|
||
|
t3_xgm_intr_enable(adapter, i);
|
||
|
|
||
|
/* Now reenable external interrupts */
|
||
|
spin_lock_irq(&adapter->work_lock);
|
||
|
if (adapter->slow_intr_mask) {
|
||
|
adapter->slow_intr_mask |= F_T3DBG;
|
||
|
t3_write_reg(adapter, A_PL_INT_CAUSE0, F_T3DBG);
|
||
|
t3_write_reg(adapter, A_PL_INT_ENABLE0,
|
||
|
adapter->slow_intr_mask);
|
||
|
}
|
||
|
spin_unlock_irq(&adapter->work_lock);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Interrupt-context handler for external (PHY) interrupts.
|
||
|
*/
|
||
|
void t3_os_ext_intr_handler(struct adapter *adapter)
|
||
|
{
|
||
|
/*
|
||
|
* Schedule a task to handle external interrupts as they may be slow
|
||
|
* and we use a mutex to protect MDIO registers. We disable PHY
|
||
|
* interrupts in the meantime and let the task reenable them when
|
||
|
* it's done.
|
||
|
*/
|
||
|
spin_lock(&adapter->work_lock);
|
||
|
if (adapter->slow_intr_mask) {
|
||
|
adapter->slow_intr_mask &= ~F_T3DBG;
|
||
|
t3_write_reg(adapter, A_PL_INT_ENABLE0,
|
||
|
adapter->slow_intr_mask);
|
||
|
queue_work(cxgb3_wq, &adapter->ext_intr_handler_task);
|
||
|
}
|
||
|
spin_unlock(&adapter->work_lock);
|
||
|
}
|
||
|
|
||
|
void t3_os_link_fault_handler(struct adapter *adapter, int port_id)
|
||
|
{
|
||
|
struct net_device *netdev = adapter->port[port_id];
|
||
|
struct port_info *pi = netdev_priv(netdev);
|
||
|
|
||
|
spin_lock(&adapter->work_lock);
|
||
|
pi->link_fault = 1;
|
||
|
spin_unlock(&adapter->work_lock);
|
||
|
}
|
||
|
|
||
|
static int t3_adapter_error(struct adapter *adapter, int reset)
|
||
|
{
|
||
|
int i, ret = 0;
|
||
|
|
||
|
if (is_offload(adapter) &&
|
||
|
test_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map)) {
|
||
|
cxgb3_event_notify(&adapter->tdev, OFFLOAD_STATUS_DOWN, 0);
|
||
|
offload_close(&adapter->tdev);
|
||
|
}
|
||
|
|
||
|
/* Stop all ports */
|
||
|
for_each_port(adapter, i) {
|
||
|
struct net_device *netdev = adapter->port[i];
|
||
|
|
||
|
if (netif_running(netdev))
|
||
|
cxgb_close(netdev);
|
||
|
}
|
||
|
|
||
|
/* Stop SGE timers */
|
||
|
t3_stop_sge_timers(adapter);
|
||
|
|
||
|
adapter->flags &= ~FULL_INIT_DONE;
|
||
|
|
||
|
if (reset)
|
||
|
ret = t3_reset_adapter(adapter);
|
||
|
|
||
|
pci_disable_device(adapter->pdev);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int t3_reenable_adapter(struct adapter *adapter)
|
||
|
{
|
||
|
if (pci_enable_device(adapter->pdev)) {
|
||
|
dev_err(&adapter->pdev->dev,
|
||
|
"Cannot re-enable PCI device after reset.\n");
|
||
|
goto err;
|
||
|
}
|
||
|
pci_set_master(adapter->pdev);
|
||
|
pci_restore_state(adapter->pdev);
|
||
|
|
||
|
/* Free sge resources */
|
||
|
t3_free_sge_resources(adapter);
|
||
|
|
||
|
if (t3_replay_prep_adapter(adapter))
|
||
|
goto err;
|
||
|
|
||
|
return 0;
|
||
|
err:
|
||
|
return -1;
|
||
|
}
|
||
|
|
||
|
static void t3_resume_ports(struct adapter *adapter)
|
||
|
{
|
||
|
int i;
|
||
|
|
||
|
/* Restart the ports */
|
||
|
for_each_port(adapter, i) {
|
||
|
struct net_device *netdev = adapter->port[i];
|
||
|
|
||
|
if (netif_running(netdev)) {
|
||
|
if (cxgb_open(netdev)) {
|
||
|
dev_err(&adapter->pdev->dev,
|
||
|
"can't bring device back up"
|
||
|
" after reset\n");
|
||
|
continue;
|
||
|
}
|
||
|
}
|
||
|
}
|
||
|
|
||
|
if (is_offload(adapter) && !ofld_disable)
|
||
|
cxgb3_event_notify(&adapter->tdev, OFFLOAD_STATUS_UP, 0);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* processes a fatal error.
|
||
|
* Bring the ports down, reset the chip, bring the ports back up.
|
||
|
*/
|
||
|
static void fatal_error_task(struct work_struct *work)
|
||
|
{
|
||
|
struct adapter *adapter = container_of(work, struct adapter,
|
||
|
fatal_error_handler_task);
|
||
|
int err = 0;
|
||
|
|
||
|
rtnl_lock();
|
||
|
err = t3_adapter_error(adapter, 1);
|
||
|
if (!err)
|
||
|
err = t3_reenable_adapter(adapter);
|
||
|
if (!err)
|
||
|
t3_resume_ports(adapter);
|
||
|
|
||
|
CH_ALERT(adapter, "adapter reset %s\n", err ? "failed" : "succeeded");
|
||
|
rtnl_unlock();
|
||
|
}
|
||
|
|
||
|
void t3_fatal_err(struct adapter *adapter)
|
||
|
{
|
||
|
unsigned int fw_status[4];
|
||
|
|
||
|
if (adapter->flags & FULL_INIT_DONE) {
|
||
|
t3_sge_stop(adapter);
|
||
|
t3_write_reg(adapter, A_XGM_TX_CTRL, 0);
|
||
|
t3_write_reg(adapter, A_XGM_RX_CTRL, 0);
|
||
|
t3_write_reg(adapter, XGM_REG(A_XGM_TX_CTRL, 1), 0);
|
||
|
t3_write_reg(adapter, XGM_REG(A_XGM_RX_CTRL, 1), 0);
|
||
|
|
||
|
spin_lock(&adapter->work_lock);
|
||
|
t3_intr_disable(adapter);
|
||
|
queue_work(cxgb3_wq, &adapter->fatal_error_handler_task);
|
||
|
spin_unlock(&adapter->work_lock);
|
||
|
}
|
||
|
CH_ALERT(adapter, "encountered fatal error, operation suspended\n");
|
||
|
if (!t3_cim_ctl_blk_read(adapter, 0xa0, 4, fw_status))
|
||
|
CH_ALERT(adapter, "FW status: 0x%x, 0x%x, 0x%x, 0x%x\n",
|
||
|
fw_status[0], fw_status[1],
|
||
|
fw_status[2], fw_status[3]);
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* t3_io_error_detected - called when PCI error is detected
|
||
|
* @pdev: Pointer to PCI device
|
||
|
* @state: The current pci connection state
|
||
|
*
|
||
|
* This function is called after a PCI bus error affecting
|
||
|
* this device has been detected.
|
||
|
*/
|
||
|
static pci_ers_result_t t3_io_error_detected(struct pci_dev *pdev,
|
||
|
pci_channel_state_t state)
|
||
|
{
|
||
|
struct adapter *adapter = pci_get_drvdata(pdev);
|
||
|
int ret;
|
||
|
|
||
|
if (state == pci_channel_io_perm_failure)
|
||
|
return PCI_ERS_RESULT_DISCONNECT;
|
||
|
|
||
|
ret = t3_adapter_error(adapter, 0);
|
||
|
|
||
|
/* Request a slot reset. */
|
||
|
return PCI_ERS_RESULT_NEED_RESET;
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* t3_io_slot_reset - called after the pci bus has been reset.
|
||
|
* @pdev: Pointer to PCI device
|
||
|
*
|
||
|
* Restart the card from scratch, as if from a cold-boot.
|
||
|
*/
|
||
|
static pci_ers_result_t t3_io_slot_reset(struct pci_dev *pdev)
|
||
|
{
|
||
|
struct adapter *adapter = pci_get_drvdata(pdev);
|
||
|
|
||
|
if (!t3_reenable_adapter(adapter))
|
||
|
return PCI_ERS_RESULT_RECOVERED;
|
||
|
|
||
|
return PCI_ERS_RESULT_DISCONNECT;
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* t3_io_resume - called when traffic can start flowing again.
|
||
|
* @pdev: Pointer to PCI device
|
||
|
*
|
||
|
* This callback is called when the error recovery driver tells us that
|
||
|
* its OK to resume normal operation.
|
||
|
*/
|
||
|
static void t3_io_resume(struct pci_dev *pdev)
|
||
|
{
|
||
|
struct adapter *adapter = pci_get_drvdata(pdev);
|
||
|
|
||
|
CH_ALERT(adapter, "adapter recovering, PEX ERR 0x%x\n",
|
||
|
t3_read_reg(adapter, A_PCIE_PEX_ERR));
|
||
|
|
||
|
t3_resume_ports(adapter);
|
||
|
}
|
||
|
|
||
|
static struct pci_error_handlers t3_err_handler = {
|
||
|
.error_detected = t3_io_error_detected,
|
||
|
.slot_reset = t3_io_slot_reset,
|
||
|
.resume = t3_io_resume,
|
||
|
};
|
||
|
|
||
|
/*
|
||
|
* Set the number of qsets based on the number of CPUs and the number of ports,
|
||
|
* not to exceed the number of available qsets, assuming there are enough qsets
|
||
|
* per port in HW.
|
||
|
*/
|
||
|
static void set_nqsets(struct adapter *adap)
|
||
|
{
|
||
|
int i, j = 0;
|
||
|
int num_cpus = num_online_cpus();
|
||
|
int hwports = adap->params.nports;
|
||
|
int nqsets = adap->msix_nvectors - 1;
|
||
|
|
||
|
if (adap->params.rev > 0 && adap->flags & USING_MSIX) {
|
||
|
if (hwports == 2 &&
|
||
|
(hwports * nqsets > SGE_QSETS ||
|
||
|
num_cpus >= nqsets / hwports))
|
||
|
nqsets /= hwports;
|
||
|
if (nqsets > num_cpus)
|
||
|
nqsets = num_cpus;
|
||
|
if (nqsets < 1 || hwports == 4)
|
||
|
nqsets = 1;
|
||
|
} else
|
||
|
nqsets = 1;
|
||
|
|
||
|
for_each_port(adap, i) {
|
||
|
struct port_info *pi = adap2pinfo(adap, i);
|
||
|
|
||
|
pi->first_qset = j;
|
||
|
pi->nqsets = nqsets;
|
||
|
j = pi->first_qset + nqsets;
|
||
|
|
||
|
dev_info(&adap->pdev->dev,
|
||
|
"Port %d using %d queue sets.\n", i, nqsets);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static int __devinit cxgb_enable_msix(struct adapter *adap)
|
||
|
{
|
||
|
struct msix_entry entries[SGE_QSETS + 1];
|
||
|
int vectors;
|
||
|
int i, err;
|
||
|
|
||
|
vectors = ARRAY_SIZE(entries);
|
||
|
for (i = 0; i < vectors; ++i)
|
||
|
entries[i].entry = i;
|
||
|
|
||
|
while ((err = pci_enable_msix(adap->pdev, entries, vectors)) > 0)
|
||
|
vectors = err;
|
||
|
|
||
|
if (err < 0)
|
||
|
pci_disable_msix(adap->pdev);
|
||
|
|
||
|
if (!err && vectors < (adap->params.nports + 1)) {
|
||
|
pci_disable_msix(adap->pdev);
|
||
|
err = -1;
|
||
|
}
|
||
|
|
||
|
if (!err) {
|
||
|
for (i = 0; i < vectors; ++i)
|
||
|
adap->msix_info[i].vec = entries[i].vector;
|
||
|
adap->msix_nvectors = vectors;
|
||
|
}
|
||
|
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
static void __devinit print_port_info(struct adapter *adap,
|
||
|
const struct adapter_info *ai)
|
||
|
{
|
||
|
static const char *pci_variant[] = {
|
||
|
"PCI", "PCI-X", "PCI-X ECC", "PCI-X 266", "PCI Express"
|
||
|
};
|
||
|
|
||
|
int i;
|
||
|
char buf[80];
|
||
|
|
||
|
if (is_pcie(adap))
|
||
|
snprintf(buf, sizeof(buf), "%s x%d",
|
||
|
pci_variant[adap->params.pci.variant],
|
||
|
adap->params.pci.width);
|
||
|
else
|
||
|
snprintf(buf, sizeof(buf), "%s %dMHz/%d-bit",
|
||
|
pci_variant[adap->params.pci.variant],
|
||
|
adap->params.pci.speed, adap->params.pci.width);
|
||
|
|
||
|
for_each_port(adap, i) {
|
||
|
struct net_device *dev = adap->port[i];
|
||
|
const struct port_info *pi = netdev_priv(dev);
|
||
|
|
||
|
if (!test_bit(i, &adap->registered_device_map))
|
||
|
continue;
|
||
|
printk(KERN_INFO "%s: %s %s %sNIC (rev %d) %s%s\n",
|
||
|
dev->name, ai->desc, pi->phy.desc,
|
||
|
is_offload(adap) ? "R" : "", adap->params.rev, buf,
|
||
|
(adap->flags & USING_MSIX) ? " MSI-X" :
|
||
|
(adap->flags & USING_MSI) ? " MSI" : "");
|
||
|
if (adap->name == dev->name && adap->params.vpd.mclk)
|
||
|
printk(KERN_INFO
|
||
|
"%s: %uMB CM, %uMB PMTX, %uMB PMRX, S/N: %s\n",
|
||
|
adap->name, t3_mc7_size(&adap->cm) >> 20,
|
||
|
t3_mc7_size(&adap->pmtx) >> 20,
|
||
|
t3_mc7_size(&adap->pmrx) >> 20,
|
||
|
adap->params.vpd.sn);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static const struct net_device_ops cxgb_netdev_ops = {
|
||
|
.ndo_open = cxgb_open,
|
||
|
.ndo_stop = cxgb_close,
|
||
|
.ndo_start_xmit = t3_eth_xmit,
|
||
|
.ndo_get_stats = cxgb_get_stats,
|
||
|
.ndo_validate_addr = eth_validate_addr,
|
||
|
.ndo_set_multicast_list = cxgb_set_rxmode,
|
||
|
.ndo_do_ioctl = cxgb_ioctl,
|
||
|
.ndo_change_mtu = cxgb_change_mtu,
|
||
|
.ndo_set_mac_address = cxgb_set_mac_addr,
|
||
|
.ndo_vlan_rx_register = vlan_rx_register,
|
||
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
||
|
.ndo_poll_controller = cxgb_netpoll,
|
||
|
#endif
|
||
|
};
|
||
|
|
||
|
static int __devinit init_one(struct pci_dev *pdev,
|
||
|
const struct pci_device_id *ent)
|
||
|
{
|
||
|
static int version_printed;
|
||
|
|
||
|
int i, err, pci_using_dac = 0;
|
||
|
resource_size_t mmio_start, mmio_len;
|
||
|
const struct adapter_info *ai;
|
||
|
struct adapter *adapter = NULL;
|
||
|
struct port_info *pi;
|
||
|
|
||
|
if (!version_printed) {
|
||
|
printk(KERN_INFO "%s - version %s\n", DRV_DESC, DRV_VERSION);
|
||
|
++version_printed;
|
||
|
}
|
||
|
|
||
|
if (!cxgb3_wq) {
|
||
|
cxgb3_wq = create_singlethread_workqueue(DRV_NAME);
|
||
|
if (!cxgb3_wq) {
|
||
|
printk(KERN_ERR DRV_NAME
|
||
|
": cannot initialize work queue\n");
|
||
|
return -ENOMEM;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
err = pci_request_regions(pdev, DRV_NAME);
|
||
|
if (err) {
|
||
|
/* Just info, some other driver may have claimed the device. */
|
||
|
dev_info(&pdev->dev, "cannot obtain PCI resources\n");
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
err = pci_enable_device(pdev);
|
||
|
if (err) {
|
||
|
dev_err(&pdev->dev, "cannot enable PCI device\n");
|
||
|
goto out_release_regions;
|
||
|
}
|
||
|
|
||
|
if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
|
||
|
pci_using_dac = 1;
|
||
|
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
|
||
|
if (err) {
|
||
|
dev_err(&pdev->dev, "unable to obtain 64-bit DMA for "
|
||
|
"coherent allocations\n");
|
||
|
goto out_disable_device;
|
||
|
}
|
||
|
} else if ((err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) != 0) {
|
||
|
dev_err(&pdev->dev, "no usable DMA configuration\n");
|
||
|
goto out_disable_device;
|
||
|
}
|
||
|
|
||
|
pci_set_master(pdev);
|
||
|
pci_save_state(pdev);
|
||
|
|
||
|
mmio_start = pci_resource_start(pdev, 0);
|
||
|
mmio_len = pci_resource_len(pdev, 0);
|
||
|
ai = t3_get_adapter_info(ent->driver_data);
|
||
|
|
||
|
adapter = kzalloc(sizeof(*adapter), GFP_KERNEL);
|
||
|
if (!adapter) {
|
||
|
err = -ENOMEM;
|
||
|
goto out_disable_device;
|
||
|
}
|
||
|
|
||
|
adapter->nofail_skb =
|
||
|
alloc_skb(sizeof(struct cpl_set_tcb_field), GFP_KERNEL);
|
||
|
if (!adapter->nofail_skb) {
|
||
|
dev_err(&pdev->dev, "cannot allocate nofail buffer\n");
|
||
|
err = -ENOMEM;
|
||
|
goto out_free_adapter;
|
||
|
}
|
||
|
|
||
|
adapter->regs = ioremap_nocache(mmio_start, mmio_len);
|
||
|
if (!adapter->regs) {
|
||
|
dev_err(&pdev->dev, "cannot map device registers\n");
|
||
|
err = -ENOMEM;
|
||
|
goto out_free_adapter;
|
||
|
}
|
||
|
|
||
|
adapter->pdev = pdev;
|
||
|
adapter->name = pci_name(pdev);
|
||
|
adapter->msg_enable = dflt_msg_enable;
|
||
|
adapter->mmio_len = mmio_len;
|
||
|
|
||
|
mutex_init(&adapter->mdio_lock);
|
||
|
spin_lock_init(&adapter->work_lock);
|
||
|
spin_lock_init(&adapter->stats_lock);
|
||
|
|
||
|
INIT_LIST_HEAD(&adapter->adapter_list);
|
||
|
INIT_WORK(&adapter->ext_intr_handler_task, ext_intr_task);
|
||
|
INIT_WORK(&adapter->fatal_error_handler_task, fatal_error_task);
|
||
|
INIT_DELAYED_WORK(&adapter->adap_check_task, t3_adap_check_task);
|
||
|
|
||
|
for (i = 0; i < ai->nports0 + ai->nports1; ++i) {
|
||
|
struct net_device *netdev;
|
||
|
|
||
|
netdev = alloc_etherdev_mq(sizeof(struct port_info), SGE_QSETS);
|
||
|
if (!netdev) {
|
||
|
err = -ENOMEM;
|
||
|
goto out_free_dev;
|
||
|
}
|
||
|
|
||
|
SET_NETDEV_DEV(netdev, &pdev->dev);
|
||
|
|
||
|
adapter->port[i] = netdev;
|
||
|
pi = netdev_priv(netdev);
|
||
|
pi->adapter = adapter;
|
||
|
pi->rx_offload = T3_RX_CSUM | T3_LRO;
|
||
|
pi->port_id = i;
|
||
|
netif_carrier_off(netdev);
|
||
|
netif_tx_stop_all_queues(netdev);
|
||
|
netdev->irq = pdev->irq;
|
||
|
netdev->mem_start = mmio_start;
|
||
|
netdev->mem_end = mmio_start + mmio_len - 1;
|
||
|
netdev->features |= NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO;
|
||
|
netdev->features |= NETIF_F_GRO;
|
||
|
if (pci_using_dac)
|
||
|
netdev->features |= NETIF_F_HIGHDMA;
|
||
|
|
||
|
netdev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
|
||
|
netdev->netdev_ops = &cxgb_netdev_ops;
|
||
|
SET_ETHTOOL_OPS(netdev, &cxgb_ethtool_ops);
|
||
|
}
|
||
|
|
||
|
pci_set_drvdata(pdev, adapter);
|
||
|
if (t3_prep_adapter(adapter, ai, 1) < 0) {
|
||
|
err = -ENODEV;
|
||
|
goto out_free_dev;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* The card is now ready to go. If any errors occur during device
|
||
|
* registration we do not fail the whole card but rather proceed only
|
||
|
* with the ports we manage to register successfully. However we must
|
||
|
* register at least one net device.
|
||
|
*/
|
||
|
for_each_port(adapter, i) {
|
||
|
err = register_netdev(adapter->port[i]);
|
||
|
if (err)
|
||
|
dev_warn(&pdev->dev,
|
||
|
"cannot register net device %s, skipping\n",
|
||
|
adapter->port[i]->name);
|
||
|
else {
|
||
|
/*
|
||
|
* Change the name we use for messages to the name of
|
||
|
* the first successfully registered interface.
|
||
|
*/
|
||
|
if (!adapter->registered_device_map)
|
||
|
adapter->name = adapter->port[i]->name;
|
||
|
|
||
|
__set_bit(i, &adapter->registered_device_map);
|
||
|
}
|
||
|
}
|
||
|
if (!adapter->registered_device_map) {
|
||
|
dev_err(&pdev->dev, "could not register any net devices\n");
|
||
|
goto out_free_dev;
|
||
|
}
|
||
|
|
||
|
/* Driver's ready. Reflect it on LEDs */
|
||
|
t3_led_ready(adapter);
|
||
|
|
||
|
if (is_offload(adapter)) {
|
||
|
__set_bit(OFFLOAD_DEVMAP_BIT, &adapter->registered_device_map);
|
||
|
cxgb3_adapter_ofld(adapter);
|
||
|
}
|
||
|
|
||
|
/* See what interrupts we'll be using */
|
||
|
if (msi > 1 && cxgb_enable_msix(adapter) == 0)
|
||
|
adapter->flags |= USING_MSIX;
|
||
|
else if (msi > 0 && pci_enable_msi(pdev) == 0)
|
||
|
adapter->flags |= USING_MSI;
|
||
|
|
||
|
set_nqsets(adapter);
|
||
|
|
||
|
err = sysfs_create_group(&adapter->port[0]->dev.kobj,
|
||
|
&cxgb3_attr_group);
|
||
|
|
||
|
print_port_info(adapter, ai);
|
||
|
return 0;
|
||
|
|
||
|
out_free_dev:
|
||
|
iounmap(adapter->regs);
|
||
|
for (i = ai->nports0 + ai->nports1 - 1; i >= 0; --i)
|
||
|
if (adapter->port[i])
|
||
|
free_netdev(adapter->port[i]);
|
||
|
|
||
|
out_free_adapter:
|
||
|
kfree(adapter);
|
||
|
|
||
|
out_disable_device:
|
||
|
pci_disable_device(pdev);
|
||
|
out_release_regions:
|
||
|
pci_release_regions(pdev);
|
||
|
pci_set_drvdata(pdev, NULL);
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
static void __devexit remove_one(struct pci_dev *pdev)
|
||
|
{
|
||
|
struct adapter *adapter = pci_get_drvdata(pdev);
|
||
|
|
||
|
if (adapter) {
|
||
|
int i;
|
||
|
|
||
|
t3_sge_stop(adapter);
|
||
|
sysfs_remove_group(&adapter->port[0]->dev.kobj,
|
||
|
&cxgb3_attr_group);
|
||
|
|
||
|
if (is_offload(adapter)) {
|
||
|
cxgb3_adapter_unofld(adapter);
|
||
|
if (test_bit(OFFLOAD_DEVMAP_BIT,
|
||
|
&adapter->open_device_map))
|
||
|
offload_close(&adapter->tdev);
|
||
|
}
|
||
|
|
||
|
for_each_port(adapter, i)
|
||
|
if (test_bit(i, &adapter->registered_device_map))
|
||
|
unregister_netdev(adapter->port[i]);
|
||
|
|
||
|
t3_stop_sge_timers(adapter);
|
||
|
t3_free_sge_resources(adapter);
|
||
|
cxgb_disable_msi(adapter);
|
||
|
|
||
|
for_each_port(adapter, i)
|
||
|
if (adapter->port[i])
|
||
|
free_netdev(adapter->port[i]);
|
||
|
|
||
|
iounmap(adapter->regs);
|
||
|
if (adapter->nofail_skb)
|
||
|
kfree_skb(adapter->nofail_skb);
|
||
|
kfree(adapter);
|
||
|
pci_release_regions(pdev);
|
||
|
pci_disable_device(pdev);
|
||
|
pci_set_drvdata(pdev, NULL);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static struct pci_driver driver = {
|
||
|
.name = DRV_NAME,
|
||
|
.id_table = cxgb3_pci_tbl,
|
||
|
.probe = init_one,
|
||
|
.remove = __devexit_p(remove_one),
|
||
|
.err_handler = &t3_err_handler,
|
||
|
};
|
||
|
|
||
|
static int __init cxgb3_init_module(void)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
cxgb3_offload_init();
|
||
|
|
||
|
ret = pci_register_driver(&driver);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static void __exit cxgb3_cleanup_module(void)
|
||
|
{
|
||
|
pci_unregister_driver(&driver);
|
||
|
if (cxgb3_wq)
|
||
|
destroy_workqueue(cxgb3_wq);
|
||
|
}
|
||
|
|
||
|
module_init(cxgb3_init_module);
|
||
|
module_exit(cxgb3_cleanup_module);
|