satip-axe/kernel/drivers/net/wireless/iwlwifi/iwl-1000.c

167 lines
5.5 KiB
C
Raw Normal View History

/******************************************************************************
*
* Copyright(c) 2008-2009 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
*****************************************************************************/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/wireless.h>
#include <net/mac80211.h>
#include <linux/etherdevice.h>
#include <asm/unaligned.h>
#include "iwl-eeprom.h"
#include "iwl-dev.h"
#include "iwl-core.h"
#include "iwl-io.h"
#include "iwl-sta.h"
#include "iwl-helpers.h"
#include "iwl-5000-hw.h"
/* Highest firmware API version supported */
#define IWL1000_UCODE_API_MAX 3
/* Lowest firmware API version supported */
#define IWL1000_UCODE_API_MIN 1
#define IWL1000_FW_PRE "iwlwifi-1000-"
#define _IWL1000_MODULE_FIRMWARE(api) IWL1000_FW_PRE #api ".ucode"
#define IWL1000_MODULE_FIRMWARE(api) _IWL1000_MODULE_FIRMWARE(api)
/*
* For 1000, use advance thermal throttling critical temperature threshold,
* but legacy thermal management implementation for now.
* This is for the reason of 1000 uCode using advance thermal throttling API
* but not implement ct_kill_exit based on ct_kill exit temperature
* so the thermal throttling will still based on legacy thermal throttling
* management.
* The code here need to be modified once 1000 uCode has the advanced thermal
* throttling algorithm in place
*/
static void iwl1000_set_ct_threshold(struct iwl_priv *priv)
{
/* want Celsius */
priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY;
priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
}
/* NIC configuration for 1000 series */
static void iwl1000_nic_config(struct iwl_priv *priv)
{
iwl5000_nic_config(priv);
/* Setting digital SVR for 1000 card to 1.32V */
/* locking is acquired in iwl_set_bits_mask_prph() function */
iwl_set_bits_mask_prph(priv, APMG_DIGITAL_SVR_REG,
APMG_SVR_DIGITAL_VOLTAGE_1_32,
~APMG_SVR_VOLTAGE_CONFIG_BIT_MSK);
}
static struct iwl_lib_ops iwl1000_lib = {
.set_hw_params = iwl5000_hw_set_hw_params,
.txq_update_byte_cnt_tbl = iwl5000_txq_update_byte_cnt_tbl,
.txq_inval_byte_cnt_tbl = iwl5000_txq_inval_byte_cnt_tbl,
.txq_set_sched = iwl5000_txq_set_sched,
.txq_agg_enable = iwl5000_txq_agg_enable,
.txq_agg_disable = iwl5000_txq_agg_disable,
.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
.txq_free_tfd = iwl_hw_txq_free_tfd,
.txq_init = iwl_hw_tx_queue_init,
.rx_handler_setup = iwl5000_rx_handler_setup,
.setup_deferred_work = iwl5000_setup_deferred_work,
.is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr,
.load_ucode = iwl5000_load_ucode,
.dump_nic_event_log = iwl_dump_nic_event_log,
.dump_nic_error_log = iwl_dump_nic_error_log,
.init_alive_start = iwl5000_init_alive_start,
.alive_notify = iwl5000_alive_notify,
.send_tx_power = iwl5000_send_tx_power,
.update_chain_flags = iwl_update_chain_flags,
.apm_ops = {
.init = iwl5000_apm_init,
.reset = iwl5000_apm_reset,
.stop = iwl5000_apm_stop,
.config = iwl1000_nic_config,
.set_pwr_src = iwl_set_pwr_src,
},
.eeprom_ops = {
.regulatory_bands = {
EEPROM_5000_REG_BAND_1_CHANNELS,
EEPROM_5000_REG_BAND_2_CHANNELS,
EEPROM_5000_REG_BAND_3_CHANNELS,
EEPROM_5000_REG_BAND_4_CHANNELS,
EEPROM_5000_REG_BAND_5_CHANNELS,
EEPROM_5000_REG_BAND_24_HT40_CHANNELS,
EEPROM_5000_REG_BAND_52_HT40_CHANNELS
},
.verify_signature = iwlcore_eeprom_verify_signature,
.acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
.release_semaphore = iwlcore_eeprom_release_semaphore,
.calib_version = iwl5000_eeprom_calib_version,
.query_addr = iwl5000_eeprom_query_addr,
},
.post_associate = iwl_post_associate,
.isr = iwl_isr_ict,
.config_ap = iwl_config_ap,
.temp_ops = {
.temperature = iwl5000_temperature,
.set_ct_kill = iwl1000_set_ct_threshold,
},
};
static struct iwl_ops iwl1000_ops = {
.ucode = &iwl5000_ucode,
.lib = &iwl1000_lib,
.hcmd = &iwl5000_hcmd,
.utils = &iwl5000_hcmd_utils,
};
struct iwl_cfg iwl1000_bgn_cfg = {
.name = "1000 Series BGN",
.fw_name_pre = IWL1000_FW_PRE,
.ucode_api_max = IWL1000_UCODE_API_MAX,
.ucode_api_min = IWL1000_UCODE_API_MIN,
.sku = IWL_SKU_G|IWL_SKU_N,
.ops = &iwl1000_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_A,
.valid_rx_ant = ANT_AB,
.need_pll_cfg = true,
.max_ll_items = OTP_MAX_LL_ITEMS_1000,
.shadow_ram_support = false,
.ht_greenfield_support = true,
.use_rts_for_ht = true, /* use rts/cts protection */
};