satip-axe/kernel/drivers/infiniband/hw/ipath/ipath_ruc.c

735 lines
19 KiB
C
Raw Normal View History

/*
* Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
* Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include <linux/sched.h>
#include <linux/spinlock.h>
#include "ipath_verbs.h"
#include "ipath_kernel.h"
/*
* Convert the AETH RNR timeout code into the number of milliseconds.
*/
const u32 ib_ipath_rnr_table[32] = {
656, /* 0 */
1, /* 1 */
1, /* 2 */
1, /* 3 */
1, /* 4 */
1, /* 5 */
1, /* 6 */
1, /* 7 */
1, /* 8 */
1, /* 9 */
1, /* A */
1, /* B */
1, /* C */
1, /* D */
2, /* E */
2, /* F */
3, /* 10 */
4, /* 11 */
6, /* 12 */
8, /* 13 */
11, /* 14 */
16, /* 15 */
21, /* 16 */
31, /* 17 */
41, /* 18 */
62, /* 19 */
82, /* 1A */
123, /* 1B */
164, /* 1C */
246, /* 1D */
328, /* 1E */
492 /* 1F */
};
/**
* ipath_insert_rnr_queue - put QP on the RNR timeout list for the device
* @qp: the QP
*
* Called with the QP s_lock held and interrupts disabled.
* XXX Use a simple list for now. We might need a priority
* queue if we have lots of QPs waiting for RNR timeouts
* but that should be rare.
*/
void ipath_insert_rnr_queue(struct ipath_qp *qp)
{
struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
/* We already did a spin_lock_irqsave(), so just use spin_lock */
spin_lock(&dev->pending_lock);
if (list_empty(&dev->rnrwait))
list_add(&qp->timerwait, &dev->rnrwait);
else {
struct list_head *l = &dev->rnrwait;
struct ipath_qp *nqp = list_entry(l->next, struct ipath_qp,
timerwait);
while (qp->s_rnr_timeout >= nqp->s_rnr_timeout) {
qp->s_rnr_timeout -= nqp->s_rnr_timeout;
l = l->next;
if (l->next == &dev->rnrwait) {
nqp = NULL;
break;
}
nqp = list_entry(l->next, struct ipath_qp,
timerwait);
}
if (nqp)
nqp->s_rnr_timeout -= qp->s_rnr_timeout;
list_add(&qp->timerwait, l);
}
spin_unlock(&dev->pending_lock);
}
/**
* ipath_init_sge - Validate a RWQE and fill in the SGE state
* @qp: the QP
*
* Return 1 if OK.
*/
int ipath_init_sge(struct ipath_qp *qp, struct ipath_rwqe *wqe,
u32 *lengthp, struct ipath_sge_state *ss)
{
int i, j, ret;
struct ib_wc wc;
*lengthp = 0;
for (i = j = 0; i < wqe->num_sge; i++) {
if (wqe->sg_list[i].length == 0)
continue;
/* Check LKEY */
if (!ipath_lkey_ok(qp, j ? &ss->sg_list[j - 1] : &ss->sge,
&wqe->sg_list[i], IB_ACCESS_LOCAL_WRITE))
goto bad_lkey;
*lengthp += wqe->sg_list[i].length;
j++;
}
ss->num_sge = j;
ret = 1;
goto bail;
bad_lkey:
memset(&wc, 0, sizeof(wc));
wc.wr_id = wqe->wr_id;
wc.status = IB_WC_LOC_PROT_ERR;
wc.opcode = IB_WC_RECV;
wc.qp = &qp->ibqp;
/* Signal solicited completion event. */
ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc, 1);
ret = 0;
bail:
return ret;
}
/**
* ipath_get_rwqe - copy the next RWQE into the QP's RWQE
* @qp: the QP
* @wr_id_only: update qp->r_wr_id only, not qp->r_sge
*
* Return 0 if no RWQE is available, otherwise return 1.
*
* Can be called from interrupt level.
*/
int ipath_get_rwqe(struct ipath_qp *qp, int wr_id_only)
{
unsigned long flags;
struct ipath_rq *rq;
struct ipath_rwq *wq;
struct ipath_srq *srq;
struct ipath_rwqe *wqe;
void (*handler)(struct ib_event *, void *);
u32 tail;
int ret;
if (qp->ibqp.srq) {
srq = to_isrq(qp->ibqp.srq);
handler = srq->ibsrq.event_handler;
rq = &srq->rq;
} else {
srq = NULL;
handler = NULL;
rq = &qp->r_rq;
}
spin_lock_irqsave(&rq->lock, flags);
if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK)) {
ret = 0;
goto unlock;
}
wq = rq->wq;
tail = wq->tail;
/* Validate tail before using it since it is user writable. */
if (tail >= rq->size)
tail = 0;
do {
if (unlikely(tail == wq->head)) {
ret = 0;
goto unlock;
}
/* Make sure entry is read after head index is read. */
smp_rmb();
wqe = get_rwqe_ptr(rq, tail);
if (++tail >= rq->size)
tail = 0;
if (wr_id_only)
break;
qp->r_sge.sg_list = qp->r_sg_list;
} while (!ipath_init_sge(qp, wqe, &qp->r_len, &qp->r_sge));
qp->r_wr_id = wqe->wr_id;
wq->tail = tail;
ret = 1;
set_bit(IPATH_R_WRID_VALID, &qp->r_aflags);
if (handler) {
u32 n;
/*
* validate head pointer value and compute
* the number of remaining WQEs.
*/
n = wq->head;
if (n >= rq->size)
n = 0;
if (n < tail)
n += rq->size - tail;
else
n -= tail;
if (n < srq->limit) {
struct ib_event ev;
srq->limit = 0;
spin_unlock_irqrestore(&rq->lock, flags);
ev.device = qp->ibqp.device;
ev.element.srq = qp->ibqp.srq;
ev.event = IB_EVENT_SRQ_LIMIT_REACHED;
handler(&ev, srq->ibsrq.srq_context);
goto bail;
}
}
unlock:
spin_unlock_irqrestore(&rq->lock, flags);
bail:
return ret;
}
/**
* ipath_ruc_loopback - handle UC and RC lookback requests
* @sqp: the sending QP
*
* This is called from ipath_do_send() to
* forward a WQE addressed to the same HCA.
* Note that although we are single threaded due to the tasklet, we still
* have to protect against post_send(). We don't have to worry about
* receive interrupts since this is a connected protocol and all packets
* will pass through here.
*/
static void ipath_ruc_loopback(struct ipath_qp *sqp)
{
struct ipath_ibdev *dev = to_idev(sqp->ibqp.device);
struct ipath_qp *qp;
struct ipath_swqe *wqe;
struct ipath_sge *sge;
unsigned long flags;
struct ib_wc wc;
u64 sdata;
atomic64_t *maddr;
enum ib_wc_status send_status;
/*
* Note that we check the responder QP state after
* checking the requester's state.
*/
qp = ipath_lookup_qpn(&dev->qp_table, sqp->remote_qpn);
spin_lock_irqsave(&sqp->s_lock, flags);
/* Return if we are already busy processing a work request. */
if ((sqp->s_flags & (IPATH_S_BUSY | IPATH_S_ANY_WAIT)) ||
!(ib_ipath_state_ops[sqp->state] & IPATH_PROCESS_OR_FLUSH_SEND))
goto unlock;
sqp->s_flags |= IPATH_S_BUSY;
again:
if (sqp->s_last == sqp->s_head)
goto clr_busy;
wqe = get_swqe_ptr(sqp, sqp->s_last);
/* Return if it is not OK to start a new work reqeust. */
if (!(ib_ipath_state_ops[sqp->state] & IPATH_PROCESS_NEXT_SEND_OK)) {
if (!(ib_ipath_state_ops[sqp->state] & IPATH_FLUSH_SEND))
goto clr_busy;
/* We are in the error state, flush the work request. */
send_status = IB_WC_WR_FLUSH_ERR;
goto flush_send;
}
/*
* We can rely on the entry not changing without the s_lock
* being held until we update s_last.
* We increment s_cur to indicate s_last is in progress.
*/
if (sqp->s_last == sqp->s_cur) {
if (++sqp->s_cur >= sqp->s_size)
sqp->s_cur = 0;
}
spin_unlock_irqrestore(&sqp->s_lock, flags);
if (!qp || !(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK)) {
dev->n_pkt_drops++;
/*
* For RC, the requester would timeout and retry so
* shortcut the timeouts and just signal too many retries.
*/
if (sqp->ibqp.qp_type == IB_QPT_RC)
send_status = IB_WC_RETRY_EXC_ERR;
else
send_status = IB_WC_SUCCESS;
goto serr;
}
memset(&wc, 0, sizeof wc);
send_status = IB_WC_SUCCESS;
sqp->s_sge.sge = wqe->sg_list[0];
sqp->s_sge.sg_list = wqe->sg_list + 1;
sqp->s_sge.num_sge = wqe->wr.num_sge;
sqp->s_len = wqe->length;
switch (wqe->wr.opcode) {
case IB_WR_SEND_WITH_IMM:
wc.wc_flags = IB_WC_WITH_IMM;
wc.ex.imm_data = wqe->wr.ex.imm_data;
/* FALLTHROUGH */
case IB_WR_SEND:
if (!ipath_get_rwqe(qp, 0))
goto rnr_nak;
break;
case IB_WR_RDMA_WRITE_WITH_IMM:
if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_WRITE)))
goto inv_err;
wc.wc_flags = IB_WC_WITH_IMM;
wc.ex.imm_data = wqe->wr.ex.imm_data;
if (!ipath_get_rwqe(qp, 1))
goto rnr_nak;
/* FALLTHROUGH */
case IB_WR_RDMA_WRITE:
if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_WRITE)))
goto inv_err;
if (wqe->length == 0)
break;
if (unlikely(!ipath_rkey_ok(qp, &qp->r_sge, wqe->length,
wqe->wr.wr.rdma.remote_addr,
wqe->wr.wr.rdma.rkey,
IB_ACCESS_REMOTE_WRITE)))
goto acc_err;
break;
case IB_WR_RDMA_READ:
if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_READ)))
goto inv_err;
if (unlikely(!ipath_rkey_ok(qp, &sqp->s_sge, wqe->length,
wqe->wr.wr.rdma.remote_addr,
wqe->wr.wr.rdma.rkey,
IB_ACCESS_REMOTE_READ)))
goto acc_err;
qp->r_sge.sge = wqe->sg_list[0];
qp->r_sge.sg_list = wqe->sg_list + 1;
qp->r_sge.num_sge = wqe->wr.num_sge;
break;
case IB_WR_ATOMIC_CMP_AND_SWP:
case IB_WR_ATOMIC_FETCH_AND_ADD:
if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_ATOMIC)))
goto inv_err;
if (unlikely(!ipath_rkey_ok(qp, &qp->r_sge, sizeof(u64),
wqe->wr.wr.atomic.remote_addr,
wqe->wr.wr.atomic.rkey,
IB_ACCESS_REMOTE_ATOMIC)))
goto acc_err;
/* Perform atomic OP and save result. */
maddr = (atomic64_t *) qp->r_sge.sge.vaddr;
sdata = wqe->wr.wr.atomic.compare_add;
*(u64 *) sqp->s_sge.sge.vaddr =
(wqe->wr.opcode == IB_WR_ATOMIC_FETCH_AND_ADD) ?
(u64) atomic64_add_return(sdata, maddr) - sdata :
(u64) cmpxchg((u64 *) qp->r_sge.sge.vaddr,
sdata, wqe->wr.wr.atomic.swap);
goto send_comp;
default:
send_status = IB_WC_LOC_QP_OP_ERR;
goto serr;
}
sge = &sqp->s_sge.sge;
while (sqp->s_len) {
u32 len = sqp->s_len;
if (len > sge->length)
len = sge->length;
if (len > sge->sge_length)
len = sge->sge_length;
BUG_ON(len == 0);
ipath_copy_sge(&qp->r_sge, sge->vaddr, len);
sge->vaddr += len;
sge->length -= len;
sge->sge_length -= len;
if (sge->sge_length == 0) {
if (--sqp->s_sge.num_sge)
*sge = *sqp->s_sge.sg_list++;
} else if (sge->length == 0 && sge->mr != NULL) {
if (++sge->n >= IPATH_SEGSZ) {
if (++sge->m >= sge->mr->mapsz)
break;
sge->n = 0;
}
sge->vaddr =
sge->mr->map[sge->m]->segs[sge->n].vaddr;
sge->length =
sge->mr->map[sge->m]->segs[sge->n].length;
}
sqp->s_len -= len;
}
if (!test_and_clear_bit(IPATH_R_WRID_VALID, &qp->r_aflags))
goto send_comp;
if (wqe->wr.opcode == IB_WR_RDMA_WRITE_WITH_IMM)
wc.opcode = IB_WC_RECV_RDMA_WITH_IMM;
else
wc.opcode = IB_WC_RECV;
wc.wr_id = qp->r_wr_id;
wc.status = IB_WC_SUCCESS;
wc.byte_len = wqe->length;
wc.qp = &qp->ibqp;
wc.src_qp = qp->remote_qpn;
wc.slid = qp->remote_ah_attr.dlid;
wc.sl = qp->remote_ah_attr.sl;
wc.port_num = 1;
/* Signal completion event if the solicited bit is set. */
ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc,
wqe->wr.send_flags & IB_SEND_SOLICITED);
send_comp:
spin_lock_irqsave(&sqp->s_lock, flags);
flush_send:
sqp->s_rnr_retry = sqp->s_rnr_retry_cnt;
ipath_send_complete(sqp, wqe, send_status);
goto again;
rnr_nak:
/* Handle RNR NAK */
if (qp->ibqp.qp_type == IB_QPT_UC)
goto send_comp;
/*
* Note: we don't need the s_lock held since the BUSY flag
* makes this single threaded.
*/
if (sqp->s_rnr_retry == 0) {
send_status = IB_WC_RNR_RETRY_EXC_ERR;
goto serr;
}
if (sqp->s_rnr_retry_cnt < 7)
sqp->s_rnr_retry--;
spin_lock_irqsave(&sqp->s_lock, flags);
if (!(ib_ipath_state_ops[sqp->state] & IPATH_PROCESS_RECV_OK))
goto clr_busy;
sqp->s_flags |= IPATH_S_WAITING;
dev->n_rnr_naks++;
sqp->s_rnr_timeout = ib_ipath_rnr_table[qp->r_min_rnr_timer];
ipath_insert_rnr_queue(sqp);
goto clr_busy;
inv_err:
send_status = IB_WC_REM_INV_REQ_ERR;
wc.status = IB_WC_LOC_QP_OP_ERR;
goto err;
acc_err:
send_status = IB_WC_REM_ACCESS_ERR;
wc.status = IB_WC_LOC_PROT_ERR;
err:
/* responder goes to error state */
ipath_rc_error(qp, wc.status);
serr:
spin_lock_irqsave(&sqp->s_lock, flags);
ipath_send_complete(sqp, wqe, send_status);
if (sqp->ibqp.qp_type == IB_QPT_RC) {
int lastwqe = ipath_error_qp(sqp, IB_WC_WR_FLUSH_ERR);
sqp->s_flags &= ~IPATH_S_BUSY;
spin_unlock_irqrestore(&sqp->s_lock, flags);
if (lastwqe) {
struct ib_event ev;
ev.device = sqp->ibqp.device;
ev.element.qp = &sqp->ibqp;
ev.event = IB_EVENT_QP_LAST_WQE_REACHED;
sqp->ibqp.event_handler(&ev, sqp->ibqp.qp_context);
}
goto done;
}
clr_busy:
sqp->s_flags &= ~IPATH_S_BUSY;
unlock:
spin_unlock_irqrestore(&sqp->s_lock, flags);
done:
if (qp && atomic_dec_and_test(&qp->refcount))
wake_up(&qp->wait);
}
static void want_buffer(struct ipath_devdata *dd, struct ipath_qp *qp)
{
if (!(dd->ipath_flags & IPATH_HAS_SEND_DMA) ||
qp->ibqp.qp_type == IB_QPT_SMI) {
unsigned long flags;
spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
dd->ipath_sendctrl |= INFINIPATH_S_PIOINTBUFAVAIL;
ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
dd->ipath_sendctrl);
ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
}
}
/**
* ipath_no_bufs_available - tell the layer driver we need buffers
* @qp: the QP that caused the problem
* @dev: the device we ran out of buffers on
*
* Called when we run out of PIO buffers.
* If we are now in the error state, return zero to flush the
* send work request.
*/
static int ipath_no_bufs_available(struct ipath_qp *qp,
struct ipath_ibdev *dev)
{
unsigned long flags;
int ret = 1;
/*
* Note that as soon as want_buffer() is called and
* possibly before it returns, ipath_ib_piobufavail()
* could be called. Therefore, put QP on the piowait list before
* enabling the PIO avail interrupt.
*/
spin_lock_irqsave(&qp->s_lock, flags);
if (ib_ipath_state_ops[qp->state] & IPATH_PROCESS_SEND_OK) {
dev->n_piowait++;
qp->s_flags |= IPATH_S_WAITING;
qp->s_flags &= ~IPATH_S_BUSY;
spin_lock(&dev->pending_lock);
if (list_empty(&qp->piowait))
list_add_tail(&qp->piowait, &dev->piowait);
spin_unlock(&dev->pending_lock);
} else
ret = 0;
spin_unlock_irqrestore(&qp->s_lock, flags);
if (ret)
want_buffer(dev->dd, qp);
return ret;
}
/**
* ipath_make_grh - construct a GRH header
* @dev: a pointer to the ipath device
* @hdr: a pointer to the GRH header being constructed
* @grh: the global route address to send to
* @hwords: the number of 32 bit words of header being sent
* @nwords: the number of 32 bit words of data being sent
*
* Return the size of the header in 32 bit words.
*/
u32 ipath_make_grh(struct ipath_ibdev *dev, struct ib_grh *hdr,
struct ib_global_route *grh, u32 hwords, u32 nwords)
{
hdr->version_tclass_flow =
cpu_to_be32((6 << 28) |
(grh->traffic_class << 20) |
grh->flow_label);
hdr->paylen = cpu_to_be16((hwords - 2 + nwords + SIZE_OF_CRC) << 2);
/* next_hdr is defined by C8-7 in ch. 8.4.1 */
hdr->next_hdr = 0x1B;
hdr->hop_limit = grh->hop_limit;
/* The SGID is 32-bit aligned. */
hdr->sgid.global.subnet_prefix = dev->gid_prefix;
hdr->sgid.global.interface_id = dev->dd->ipath_guid;
hdr->dgid = grh->dgid;
/* GRH header size in 32-bit words. */
return sizeof(struct ib_grh) / sizeof(u32);
}
void ipath_make_ruc_header(struct ipath_ibdev *dev, struct ipath_qp *qp,
struct ipath_other_headers *ohdr,
u32 bth0, u32 bth2)
{
u16 lrh0;
u32 nwords;
u32 extra_bytes;
/* Construct the header. */
extra_bytes = -qp->s_cur_size & 3;
nwords = (qp->s_cur_size + extra_bytes) >> 2;
lrh0 = IPATH_LRH_BTH;
if (unlikely(qp->remote_ah_attr.ah_flags & IB_AH_GRH)) {
qp->s_hdrwords += ipath_make_grh(dev, &qp->s_hdr.u.l.grh,
&qp->remote_ah_attr.grh,
qp->s_hdrwords, nwords);
lrh0 = IPATH_LRH_GRH;
}
lrh0 |= qp->remote_ah_attr.sl << 4;
qp->s_hdr.lrh[0] = cpu_to_be16(lrh0);
qp->s_hdr.lrh[1] = cpu_to_be16(qp->remote_ah_attr.dlid);
qp->s_hdr.lrh[2] = cpu_to_be16(qp->s_hdrwords + nwords + SIZE_OF_CRC);
qp->s_hdr.lrh[3] = cpu_to_be16(dev->dd->ipath_lid |
qp->remote_ah_attr.src_path_bits);
bth0 |= ipath_get_pkey(dev->dd, qp->s_pkey_index);
bth0 |= extra_bytes << 20;
ohdr->bth[0] = cpu_to_be32(bth0 | (1 << 22));
ohdr->bth[1] = cpu_to_be32(qp->remote_qpn);
ohdr->bth[2] = cpu_to_be32(bth2);
}
/**
* ipath_do_send - perform a send on a QP
* @data: contains a pointer to the QP
*
* Process entries in the send work queue until credit or queue is
* exhausted. Only allow one CPU to send a packet per QP (tasklet).
* Otherwise, two threads could send packets out of order.
*/
void ipath_do_send(unsigned long data)
{
struct ipath_qp *qp = (struct ipath_qp *)data;
struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
int (*make_req)(struct ipath_qp *qp);
unsigned long flags;
if ((qp->ibqp.qp_type == IB_QPT_RC ||
qp->ibqp.qp_type == IB_QPT_UC) &&
qp->remote_ah_attr.dlid == dev->dd->ipath_lid) {
ipath_ruc_loopback(qp);
goto bail;
}
if (qp->ibqp.qp_type == IB_QPT_RC)
make_req = ipath_make_rc_req;
else if (qp->ibqp.qp_type == IB_QPT_UC)
make_req = ipath_make_uc_req;
else
make_req = ipath_make_ud_req;
spin_lock_irqsave(&qp->s_lock, flags);
/* Return if we are already busy processing a work request. */
if ((qp->s_flags & (IPATH_S_BUSY | IPATH_S_ANY_WAIT)) ||
!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_OR_FLUSH_SEND)) {
spin_unlock_irqrestore(&qp->s_lock, flags);
goto bail;
}
qp->s_flags |= IPATH_S_BUSY;
spin_unlock_irqrestore(&qp->s_lock, flags);
again:
/* Check for a constructed packet to be sent. */
if (qp->s_hdrwords != 0) {
/*
* If no PIO bufs are available, return. An interrupt will
* call ipath_ib_piobufavail() when one is available.
*/
if (ipath_verbs_send(qp, &qp->s_hdr, qp->s_hdrwords,
qp->s_cur_sge, qp->s_cur_size)) {
if (ipath_no_bufs_available(qp, dev))
goto bail;
}
dev->n_unicast_xmit++;
/* Record that we sent the packet and s_hdr is empty. */
qp->s_hdrwords = 0;
}
if (make_req(qp))
goto again;
bail:;
}
/*
* This should be called with s_lock held.
*/
void ipath_send_complete(struct ipath_qp *qp, struct ipath_swqe *wqe,
enum ib_wc_status status)
{
u32 old_last, last;
if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_OR_FLUSH_SEND))
return;
/* See ch. 11.2.4.1 and 10.7.3.1 */
if (!(qp->s_flags & IPATH_S_SIGNAL_REQ_WR) ||
(wqe->wr.send_flags & IB_SEND_SIGNALED) ||
status != IB_WC_SUCCESS) {
struct ib_wc wc;
memset(&wc, 0, sizeof wc);
wc.wr_id = wqe->wr.wr_id;
wc.status = status;
wc.opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
wc.qp = &qp->ibqp;
if (status == IB_WC_SUCCESS)
wc.byte_len = wqe->length;
ipath_cq_enter(to_icq(qp->ibqp.send_cq), &wc,
status != IB_WC_SUCCESS);
}
old_last = last = qp->s_last;
if (++last >= qp->s_size)
last = 0;
qp->s_last = last;
if (qp->s_cur == old_last)
qp->s_cur = last;
if (qp->s_tail == old_last)
qp->s_tail = last;
if (qp->state == IB_QPS_SQD && last == qp->s_cur)
qp->s_draining = 0;
}