satip-axe/kernel/drivers/ata/pata_marvell.c

197 lines
4.4 KiB
C
Raw Normal View History

/*
* Marvell PATA driver.
*
* For the moment we drive the PATA port in legacy mode. That
* isn't making full use of the device functionality but it is
* easy to get working.
*
* (c) 2006 Red Hat
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#include <linux/ata.h>
#define DRV_NAME "pata_marvell"
#define DRV_VERSION "0.1.6"
/**
* marvell_pata_active - check if PATA is active
* @pdev: PCI device
*
* Returns 1 if the PATA port may be active. We know how to check this
* for the 6145 but not the other devices
*/
static int marvell_pata_active(struct pci_dev *pdev)
{
int i;
u32 devices;
void __iomem *barp;
/* We don't yet know how to do this for other devices */
if (pdev->device != 0x6145)
return 1;
barp = pci_iomap(pdev, 5, 0x10);
if (barp == NULL)
return -ENOMEM;
printk("BAR5:");
for(i = 0; i <= 0x0F; i++)
printk("%02X:%02X ", i, ioread8(barp + i));
printk("\n");
devices = ioread32(barp + 0x0C);
pci_iounmap(pdev, barp);
if (devices & 0x10)
return 1;
return 0;
}
/**
* marvell_pre_reset - check for 40/80 pin
* @link: link
* @deadline: deadline jiffies for the operation
*
* Perform the PATA port setup we need.
*/
static int marvell_pre_reset(struct ata_link *link, unsigned long deadline)
{
struct ata_port *ap = link->ap;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
if (pdev->device == 0x6145 && ap->port_no == 0 &&
!marvell_pata_active(pdev)) /* PATA enable ? */
return -ENOENT;
return ata_sff_prereset(link, deadline);
}
static int marvell_cable_detect(struct ata_port *ap)
{
/* Cable type */
switch(ap->port_no)
{
case 0:
if (ioread8(ap->ioaddr.bmdma_addr + 1) & 1)
return ATA_CBL_PATA40;
return ATA_CBL_PATA80;
case 1: /* Legacy SATA port */
return ATA_CBL_SATA;
}
BUG();
return 0; /* Our BUG macro needs the right markup */
}
/* No PIO or DMA methods needed for this device */
static struct scsi_host_template marvell_sht = {
ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations marvell_ops = {
.inherits = &ata_bmdma_port_ops,
.cable_detect = marvell_cable_detect,
.prereset = marvell_pre_reset,
};
/**
* marvell_init_one - Register Marvell ATA PCI device with kernel services
* @pdev: PCI device to register
* @ent: Entry in marvell_pci_tbl matching with @pdev
*
* Called from kernel PCI layer.
*
* LOCKING:
* Inherited from PCI layer (may sleep).
*
* RETURNS:
* Zero on success, or -ERRNO value.
*/
static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
.port_ops = &marvell_ops,
};
static const struct ata_port_info info_sata = {
/* Slave possible as its magically mapped not real */
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA6,
.port_ops = &marvell_ops,
};
const struct ata_port_info *ppi[] = { &info, &info_sata };
if (pdev->device == 0x6101)
ppi[1] = &ata_dummy_port_info;
#if defined(CONFIG_AHCI) || defined(CONFIG_AHCI_MODULE)
if (!marvell_pata_active(pdev)) {
printk(KERN_INFO DRV_NAME ": PATA port not active, deferring to AHCI driver.\n");
return -ENODEV;
}
#endif
return ata_pci_sff_init_one(pdev, ppi, &marvell_sht, NULL);
}
static const struct pci_device_id marvell_pci_tbl[] = {
{ PCI_DEVICE(0x11AB, 0x6101), },
{ PCI_DEVICE(0x11AB, 0x6121), },
{ PCI_DEVICE(0x11AB, 0x6123), },
{ PCI_DEVICE(0x11AB, 0x6145), },
{ } /* terminate list */
};
static struct pci_driver marvell_pci_driver = {
.name = DRV_NAME,
.id_table = marvell_pci_tbl,
.probe = marvell_init_one,
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = ata_pci_device_resume,
#endif
};
static int __init marvell_init(void)
{
return pci_register_driver(&marvell_pci_driver);
}
static void __exit marvell_exit(void)
{
pci_unregister_driver(&marvell_pci_driver);
}
module_init(marvell_init);
module_exit(marvell_exit);
MODULE_AUTHOR("Alan Cox");
MODULE_DESCRIPTION("SCSI low-level driver for Marvell ATA in legacy mode");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, marvell_pci_tbl);
MODULE_VERSION(DRV_VERSION);