satip-axe/kernel/drivers/net/nwhwconfig.c

263 lines
6.0 KiB
C
Raw Normal View History

/*
* Configuration of network device hardware from the kernel command line.
*
* Copyright (c) STMicroelectronics Limited
* Author: Stuart Menefy <stuart.menefy@st.com>
*/
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/jiffies.h>
#include <linux/random.h>
#include <linux/init.h>
#include <linux/utsname.h>
#include <linux/in.h>
#include <linux/if.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
#include <linux/if_arp.h>
#include <linux/skbuff.h>
#include <linux/ip.h>
#include <linux/socket.h>
#include <linux/route.h>
#include <linux/udp.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/major.h>
#include <linux/root_dev.h>
#include <linux/ethtool.h>
#include <linux/etherdevice.h>
#include <net/arp.h>
#include <net/ip.h>
#include <net/ipconfig.h>
#include <asm/uaccess.h>
#include <net/checksum.h>
#include <asm/processor.h>
#undef NWHWDEBUG
#define NWHW_MAX_DEV NETDEV_BOOT_SETUP_MAX
static struct eth_dev {
char user_dev_name[IFNAMSIZ];
char user_hw_addr[18];
int user_speed;
int user_duplex;
} nwhwdev[NWHW_MAX_DEV];
static inline int hex_conv_nibble(char x)
{
if ((x >= '0') && (x <= '9'))
return x - '0';
if ((x >= 'a') && (x <= 'f'))
return x - 'a' + 10;
if ((x >= 'A') && (x <= 'F'))
return x - 'A' + 10;
return -1;
}
static inline int parse_ether(const char *mac_addr_str, struct sockaddr *addr)
{
int i, c1, c2;
char *mac_addr = addr->sa_data;
/*
* Pull out 6 two-digit hex chars
*/
for (i = 0; i < 6; i++) {
c1 = hex_conv_nibble(*mac_addr_str++);
c2 = hex_conv_nibble(*mac_addr_str++);
if ((c1 == -1) || (c2 == -1))
return 0;
mac_addr[i] = (c1 << 4) | c2;
if ((i != 5) && (*mac_addr_str++ != ':'))
return 0;
}
addr->sa_family = ARPHRD_ETHER;
return 1;
}
/**
* nwhw_config
* @dev : net device pointer
* Description:
* it sets the MAC address.
* Note that if the network device driver already uses a right
* address this function doesn't replace any value.
*/
static int __init nwhw_config(void)
{
struct net_device *dev;
struct sockaddr ether_addr;
int valid_ether;
int ndev = 0;
while ((ndev < NWHW_MAX_DEV) &&
(dev = __dev_get_by_name(&init_net,
nwhwdev[ndev].user_dev_name))) {
if (!dev)
break;
if (!is_valid_ether_addr(dev->dev_addr)) {
valid_ether = nwhwdev[ndev].user_hw_addr[0];
if (valid_ether) {
valid_ether =
parse_ether(nwhwdev[ndev].user_hw_addr,
&ether_addr);
if (!valid_ether) {
printk("failed to parse addr: %s\n",
nwhwdev[ndev].user_hw_addr);
}
}
printk(KERN_INFO "%s: (%s) setting mac address: %s\n",
__FUNCTION__, nwhwdev[ndev].user_dev_name,
nwhwdev[ndev].user_hw_addr);
if (valid_ether) {
rtnl_lock();
if (dev_set_mac_address(dev, &ether_addr)) {
printk(KERN_WARNING
"%s: not set MAC address...\n",
__FUNCTION__);
}
rtnl_unlock();
}
}
if ((nwhwdev[ndev].user_speed != -1) ||
(nwhwdev[ndev].user_duplex != -1)) {
struct ethtool_cmd cmd = { ETHTOOL_GSET };
if (!dev->ethtool_ops->get_settings ||
(dev->ethtool_ops->get_settings(dev, &cmd) < 0)) {
printk
("Failed to read ether device settings\n");
} else {
cmd.cmd = ETHTOOL_SSET;
cmd.autoneg = AUTONEG_DISABLE;
if (nwhwdev[ndev].user_speed != -1)
cmd.speed = nwhwdev[ndev].user_speed;
if (nwhwdev[ndev].user_duplex != -1)
cmd.duplex = nwhwdev[ndev].user_duplex;
if (!dev->ethtool_ops->set_settings ||
(dev->ethtool_ops->set_settings(dev, &cmd) <
0)) {
printk
("Failed to set ether device settings\n");
}
}
}
ndev++;
}
return (0);
}
device_initcall(nwhw_config);
#if defined (CONFIG_NETPOLL)
void nwhw_uconfig(struct net_device *dev)
{
struct sockaddr ether_addr;
int ndev = 0;
int valid_ether;
valid_ether = nwhwdev[ndev].user_hw_addr[0];
printk(KERN_DEBUG "%s\n", __FUNCTION__);
while (ndev < NWHW_MAX_DEV) {
if (valid_ether) {
valid_ether = parse_ether(nwhwdev[ndev].user_hw_addr,
&ether_addr);
if (!valid_ether) {
printk(KERN_WARNING
"\tfailed to parse ether addr\n");
}
}
if (valid_ether) {
if (dev_set_mac_address(dev, &ether_addr))
printk(KERN_WARNING "\tnot set MAC address\n");
}
ndev++;
}
return;
}
#endif
static void nwhw_print_args(void)
{
#ifdef NWHWDEBUG
int i;
printk("%s\n", __FUNCTION__);
for (i = 0; i < NWHW_MAX_DEV; i++) {
printk("\t%d) %s, addr %s, speed %d, duplex %s\n", i,
nwhwdev[i].user_dev_name, nwhwdev[i].user_hw_addr,
nwhwdev[i].user_speed,
(nwhwdev[i].user_duplex) ? "Full" : "Half");
}
#endif
return;
}
/**
* nwhw_config_setup - parse the nwhwconfig parameters
* @str : pointer to the nwhwconfig parameter
* Description:
* This function parses the nwhwconfig command line argumets.
* Command line syntax:
* nwhwconf=device:eth0,hwaddr:<mac0>[,speed:<speed0>][,duplex:<duplex0>];
device:eth1,hwaddr:<mac1>[,speed:<speed1>][,duplex:<duplex1>];
...
*/
static int __init nwhw_config_setup(char *str)
{
char *opt;
int j = 0;
if (!str || !*str)
return 0;
while (((opt = strsep(&str, ";")) != NULL) && (j < NWHW_MAX_DEV)) {
char *p;
nwhwdev[j].user_speed = -1;
nwhwdev[j].user_duplex = -1;
while ((p = strsep(&opt, ",")) != NULL) {
if (!strncmp(p, "device:", 7)) {
strlcpy(nwhwdev[j].user_dev_name, p + 7,
sizeof(nwhwdev[j].user_dev_name));
} else if (!strncmp(p, "hwaddr:", 7)) {
strlcpy(nwhwdev[j].user_hw_addr, p + 7,
sizeof(nwhwdev[j].user_hw_addr));
} else if (!strncmp(p, "speed:", 6)) {
switch (simple_strtoul(p + 6, NULL, 0)) {
case 10:
nwhwdev[j].user_speed = SPEED_10;
break;
case 100:
nwhwdev[j].user_speed = SPEED_100;
break;
}
} else if (!strcmp(p, "duplex:full")) {
nwhwdev[j].user_duplex = DUPLEX_FULL;
} else if (!strcmp(p, "duplex:half")) {
nwhwdev[j].user_duplex = DUPLEX_HALF;
}
}
j++;
}
nwhw_print_args();
return 1;
}
__setup("nwhwconf=", nwhw_config_setup);