satip-axe/kernel/drivers/stm/fli7510_hispeed.c

645 lines
20 KiB
C
Raw Normal View History

/*
* (c) 2010 STMicroelectronics Limited
*
* Author: Pawel Moll <pawel.moll@st.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ethtool.h>
#include <linux/dma-mapping.h>
#include <linux/phy.h>
#include <linux/stm/pad.h>
#include <linux/stm/sysconf.h>
#include <linux/stm/emi.h>
#include <linux/stm/device.h>
#include <linux/stm/fli7510.h>
#include <asm/irq-ilc.h>
/* Ethernet MAC resources ------------------------------------------------- */
static struct stm_pad_config fli7510_ethernet_pad_configs[] = {
[fli7510_ethernet_mode_mii] = {
.gpios_num = 19,
.gpios = (struct stm_pad_gpio []) {
STM_PAD_PIO_OUT(18, 0, 1), /* MDC */
STM_PAD_PIO_IN(18, 1, -1), /* COL */
STM_PAD_PIO_IN(18, 2, -1), /* CRS */
STM_PAD_PIO_IN(18, 3, -1), /* MDINT */
STM_PAD_PIO_BIDIR(18, 4, 1), /* MDIO */
STM_PAD_PIO_OUT_NAMED(18, 5, 1, "PHYCLK"),
STM_PAD_PIO_OUT(20, 0, 1), /* TXD[0] */
STM_PAD_PIO_OUT(20, 1, 1), /* TXD[1] */
STM_PAD_PIO_OUT(20, 2, 1), /* TXD[2] */
STM_PAD_PIO_OUT(20, 3, 1), /* TXD[3] */
STM_PAD_PIO_OUT(20, 4, 1), /* TXEN */
STM_PAD_PIO_IN_NAMED(20, -1, -1, "TXCLK"),
STM_PAD_PIO_IN(21, 0, -1), /* RXD[0] */
STM_PAD_PIO_IN(21, 1, -1), /* RXD[1] */
STM_PAD_PIO_IN(21, 2, -1), /* RXD[2] */
STM_PAD_PIO_IN(21, 3, -1), /* RXD[3] */
STM_PAD_PIO_IN(21, 4, -1), /* RXDV */
STM_PAD_PIO_IN(21, 5, -1), /* RX_ER */
STM_PAD_PIO_IN(21, 6, -1), /* RXCLK */
},
.sysconfs_num = 4,
.sysconfs = (struct stm_pad_sysconf []) {
/* gmac_mii_enable */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_2, 8, 8, 1),
/* gmac_phy_clock_sel
* value set in fli7510_configure_ethernet() */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_2, 9, 9, -1),
/* gmac_enable */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_2, 24, 24, 1),
/* phy_intf_sel */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_2, 26, 28, 0),
},
},
[fli7510_ethernet_mode_gmii] = { /* Not supported by 7510! */
.gpios_num = 27,
.gpios = (struct stm_pad_gpio []) {
STM_PAD_PIO_OUT(18, 0, 1), /* MDC */
STM_PAD_PIO_IN(18, 1, -1), /* COL */
STM_PAD_PIO_IN(18, 2, -1), /* CRS */
STM_PAD_PIO_IN(18, 3, -1), /* MDINT */
STM_PAD_PIO_BIDIR(18, 4, 1), /* MDIO */
STM_PAD_PIO_OUT(18, 5, 1), /* PHYCLK */
STM_PAD_PIO_OUT(20, 0, 1), /* TXD[0] */
STM_PAD_PIO_OUT(20, 1, 1), /* TXD[1] */
STM_PAD_PIO_OUT(20, 2, 1), /* TXD[2] */
STM_PAD_PIO_OUT(20, 3, 1), /* TXD[3] */
STM_PAD_PIO_OUT(20, 4, 1), /* TXEN */
STM_PAD_PIO_IN(20, 5, -1), /* TXCLK */
STM_PAD_PIO_IN(21, 0, -1), /* RXD[0] */
STM_PAD_PIO_IN(21, 1, -1), /* RXD[1] */
STM_PAD_PIO_IN(21, 2, -1), /* RXD[2] */
STM_PAD_PIO_IN(21, 3, -1), /* RXD[3] */
STM_PAD_PIO_IN(21, 4, -1), /* RXDV */
STM_PAD_PIO_IN(21, 5, -1), /* RX_ER */
STM_PAD_PIO_IN(21, 6, -1), /* RXCLK */
STM_PAD_PIO_IN(24, 0, -1), /* RXD[4] */
STM_PAD_PIO_IN(24, 1, -1), /* RXD[5] */
STM_PAD_PIO_IN(24, 2, -1), /* RXD[6] */
STM_PAD_PIO_IN(24, 3, -1), /* RXD[7] */
STM_PAD_PIO_OUT(24, 4, 1), /* TXD[4] */
STM_PAD_PIO_OUT(24, 5, 1), /* TXD[5] */
STM_PAD_PIO_OUT(24, 6, 1), /* TXD[6] */
STM_PAD_PIO_OUT(24, 7, 1), /* TXD[7] */
},
.sysconfs_num = 4,
.sysconfs = (struct stm_pad_sysconf []) {
/* gmac_mii_enable */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_2, 8, 8, 1),
/* gmac_phy_clock_sel */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_2, 9, 9, 1),
/* gmac_enable */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_2, 24, 24, 1),
/* phy_intf_sel */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_2, 26, 28, 0),
},
},
[fli7510_ethernet_mode_rmii] = {
.gpios_num = 11,
.gpios = (struct stm_pad_gpio []) {
STM_PAD_PIO_OUT(18, 0, 1), /* MDC */
STM_PAD_PIO_IN(18, 3, -1), /* MDINT */
STM_PAD_PIO_BIDIR(18, 4, 1), /* MDIO */
STM_PAD_PIO_STUB_NAMED(18, 5, "PHYCLK"),
STM_PAD_PIO_OUT(20, 0, 1), /* TXD[0] */
STM_PAD_PIO_OUT(20, 1, 1), /* TXD[1] */
STM_PAD_PIO_OUT(20, 4, 1), /* TXEN */
STM_PAD_PIO_IN(21, 0, -1), /* RXD[0] */
STM_PAD_PIO_IN(21, 1, -1), /* RXD[1] */
STM_PAD_PIO_IN(21, 4, -1), /* RXDV */
STM_PAD_PIO_IN(21, 5, -1), /* RX_ER */
},
.sysconfs_num = 4,
.sysconfs = (struct stm_pad_sysconf []) {
/* gmac_mii_enable */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_2, 8, 8, 1),
/* gmac_phy_clock_sel
* value set in fli7510_configure_ethernet() */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_2, 9, 9, -1),
/* gmac_enable */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_2, 24, 24, 1),
/* phy_intf_sel */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_2, 26, 28, 4),
},
},
[fli7510_ethernet_mode_reverse_mii] = {
.gpios_num = 19,
.gpios = (struct stm_pad_gpio []) {
STM_PAD_PIO_IN(18, 0, 1), /* MDC */
STM_PAD_PIO_IN(18, 1, -1), /* COL */
STM_PAD_PIO_OUT(18, 2, 1), /* CRS */
STM_PAD_PIO_OUT(18, 3, 1), /* MDINT */
STM_PAD_PIO_BIDIR(18, 4, 1), /* MDIO */
STM_PAD_PIO_OUT_NAMED(18, 5, 1, "PHYCLK"),
STM_PAD_PIO_OUT(20, 0, 1), /* TXD[0] */
STM_PAD_PIO_OUT(20, 1, 1), /* TXD[1] */
STM_PAD_PIO_OUT(20, 2, 1), /* TXD[2] */
STM_PAD_PIO_OUT(20, 3, 1), /* TXD[3] */
STM_PAD_PIO_OUT(20, 4, 1), /* TXEN */
STM_PAD_PIO_IN_NAMED(20, -1, -1, "TXCLK"),
STM_PAD_PIO_IN(21, 0, -1), /* RXD[0] */
STM_PAD_PIO_IN(21, 1, -1), /* RXD[1] */
STM_PAD_PIO_IN(21, 2, -1), /* RXD[2] */
STM_PAD_PIO_IN(21, 3, -1), /* RXD[3] */
STM_PAD_PIO_IN(21, 4, -1), /* RXDV */
STM_PAD_PIO_IN(21, 5, -1), /* RX_ER */
STM_PAD_PIO_IN(21, 6, -1), /* RXCLK */
},
.sysconfs_num = 4,
.sysconfs = (struct stm_pad_sysconf []) {
/* gmac_mii_enable */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_2, 8, 8, 0),
/* gmac_phy_clock_sel
* value set in fli7510_configure_ethernet() */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_2, 9, 9, -1),
/* gmac_enable */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_2, 24, 24, 1),
/* phy_intf_sel */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_2, 26, 28, 0),
},
},
};
static void fli7510_ethernet_fix_mac_speed(void *bsp_priv, unsigned int speed)
{
struct sysconf_field *mac_speed_sel = bsp_priv;
sysconf_write(mac_speed_sel, (speed == SPEED_100) ? 1 : 0);
}
static struct plat_stmmacenet_data fli7510_ethernet_platform_data = {
.pbl = 32,
.has_gmac = 1,
.enh_desc = 1,
.tx_coe = 1,
.bugged_jumbo =1,
.fix_mac_speed = fli7510_ethernet_fix_mac_speed,
.init = &stmmac_claim_resource,
};
static struct platform_device fli7510_ethernet_device = {
.name = "stmmaceth",
.id = -1,
.num_resources = 2,
.resource = (struct resource[]) {
STM_PLAT_RESOURCE_MEM(0xfd920000, 0x08000),
STM_PLAT_RESOURCE_IRQ_NAMED("macirq", ILC_IRQ(40), -1),
},
.dev.platform_data = &fli7510_ethernet_platform_data,
};
void __init fli7510_configure_ethernet(struct fli7510_ethernet_config *config)
{
static int configured;
struct fli7510_ethernet_config default_config;
struct stm_pad_config *pad_config;
const int interfaces[] = {
[fli7510_ethernet_mode_mii] = PHY_INTERFACE_MODE_MII,
[fli7510_ethernet_mode_gmii] = PHY_INTERFACE_MODE_GMII,
[fli7510_ethernet_mode_rmii] = PHY_INTERFACE_MODE_RMII,
[fli7510_ethernet_mode_reverse_mii] = PHY_INTERFACE_MODE_MII,
};
BUG_ON(configured);
configured = 1;
if (!config)
config = &default_config;
pad_config = &fli7510_ethernet_pad_configs[config->mode];
fli7510_ethernet_platform_data.custom_cfg = (void *) pad_config;
fli7510_ethernet_platform_data.interface = interfaces[config->mode];
fli7510_ethernet_platform_data.bus_id = config->phy_bus;
fli7510_ethernet_platform_data.phy_addr = config->phy_addr;
fli7510_ethernet_platform_data.mdio_bus_data = config->mdio_bus_data;
switch (config->mode) {
case fli7510_ethernet_mode_mii:
case fli7510_ethernet_mode_reverse_mii:
if (config->ext_clk) {
stm_pad_set_pio_ignored(pad_config, "PHYCLK");
pad_config->sysconfs[1].value = 1;
} else {
pad_config->sysconfs[1].value = 0;
}
stm_pad_set_pio(pad_config, "TXCLK", 20,
cpu_data->type == CPU_FLI7510 ? 6 : 5);
break;
case fli7510_ethernet_mode_gmii:
if (cpu_data->type == CPU_FLI7510) {
BUG(); /* Not supported */
return;
}
break;
case fli7510_ethernet_mode_rmii:
if (config->ext_clk) {
stm_pad_set_pio_in(pad_config, "PHYCLK", -1);
pad_config->sysconfs[1].value = 1;
} else {
stm_pad_set_pio_out(pad_config, "PHYCLK", 1);
pad_config->sysconfs[1].value = 0;
}
break;
default:
BUG();
break;
}
fli7510_ethernet_platform_data.bsp_priv =
sysconf_claim(CFG_COMMS_CONFIG_2, 25, 25,
"gmac_mac_speed");
platform_device_register(&fli7510_ethernet_device);
}
/* USB resources ---------------------------------------------------------- */
static u64 fli7510_usb_dma_mask = DMA_BIT_MASK(32);
static int fli7510_usb_xtal_initialized;
static struct sysconf_field *fli7510_usb_xtal_sc;
static int fli7510_usb_xtal_claim(struct stm_pad_state *state, void *priv)
{
if (!fli7510_usb_xtal_initialized++) {
fli7510_usb_xtal_sc = sysconf_claim(CFG_SPARE_1, 1, 1,
"USB_xtal_valid");
BUG_ON(!fli7510_usb_xtal_sc);
sysconf_write(fli7510_usb_xtal_sc, 1);
}
return 0;
}
static void fli7510_usb_xtal_release(struct stm_pad_state *state, void *priv)
{
if (!--fli7510_usb_xtal_initialized)
sysconf_release(fli7510_usb_xtal_sc);
}
static struct stm_pad_config fli7510_usb_pad_configs[] = {
[fli7510_usb_ovrcur_disabled] = {
.gpios_num = 1,
.gpios = (struct stm_pad_gpio []) {
STM_PAD_PIO_OUT(27, 2, 1), /* USB_A_PWREN */
},
.sysconfs_num = 2,
.sysconfs = (struct stm_pad_sysconf []) {
/* usba_enable_pad_override */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_1, 12, 12, 1),
/* usba_ovrcur */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_1, 13, 13, 1),
},
.custom_claim = fli7510_usb_xtal_claim,
.custom_release = fli7510_usb_xtal_release,
},
[fli7510_usb_ovrcur_active_high] = {
.gpios_num = 2,
.gpios = (struct stm_pad_gpio []) {
STM_PAD_PIO_IN(27, 1, -1), /* USB_A_OVRCUR */
STM_PAD_PIO_OUT(27, 2, 1), /* USB_A_PWREN */
},
.sysconfs_num = 2,
.sysconfs = (struct stm_pad_sysconf []) {
/* usba_enable_pad_override */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_1, 12, 12, 0),
/* usba_ovrcur_polarity */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_1, 11, 11, 0),
},
.custom_claim = fli7510_usb_xtal_claim,
.custom_release = fli7510_usb_xtal_release,
},
[fli7510_usb_ovrcur_active_low] = {
.gpios_num = 2,
.gpios = (struct stm_pad_gpio []) {
STM_PAD_PIO_IN(27, 1, -1), /* USB_A_OVRCUR */
STM_PAD_PIO_OUT(27, 2, 1), /* USB_A_PWREN */
},
.sysconfs_num = 2,
.sysconfs = (struct stm_pad_sysconf []) {
/* usba_enable_pad_override */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_1, 12, 12, 0),
/* usba_ovrcur_polarity */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_1, 11, 11, 1),
},
.custom_claim = fli7510_usb_xtal_claim,
.custom_release = fli7510_usb_xtal_release,
}
};
static struct stm_plat_usb_data fli7510_usb_platform_data = {
.flags = STM_PLAT_USB_FLAGS_STRAP_16BIT |
STM_PLAT_USB_FLAGS_STRAP_PLL |
STM_PLAT_USB_FLAGS_STBUS_CONFIG_THRESHOLD256,
.device_config = &(struct stm_device_config){
/* .pad_config set in fli7510_configure_usb() */
},
};
static struct platform_device fli7510_usb_device = {
.name = "stm-usb",
.id = -1,
.dev = {
.dma_mask = &fli7510_usb_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &fli7510_usb_platform_data,
},
.num_resources = 6,
.resource = (struct resource[]) {
STM_PLAT_RESOURCE_MEM_NAMED("ehci", 0xfdaffe00, 0x100),
STM_PLAT_RESOURCE_IRQ_NAMED("ehci", ILC_IRQ(54), -1),
STM_PLAT_RESOURCE_MEM_NAMED("ohci", 0xfdaffc00, 0x100),
STM_PLAT_RESOURCE_IRQ_NAMED("ohci", ILC_IRQ(55), -1),
STM_PLAT_RESOURCE_MEM_NAMED("wrapper", 0xfda00000, 0x100),
STM_PLAT_RESOURCE_MEM_NAMED("protocol", 0xfdafff00, 0x100),
},
};
static struct stm_pad_config *fli7520_usb_pad_configs[] = {
[0] = (struct stm_pad_config []) {
[fli7510_usb_ovrcur_disabled] = {
.gpios_num = 1,
.gpios = (struct stm_pad_gpio []) {
STM_PAD_PIO_OUT(26, 4, 1), /* USB_A_PWREN */
},
.sysconfs_num = 4,
.sysconfs = (struct stm_pad_sysconf []) {
/* usb1_enable_pad_override */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_1, 12, 12, 1),
/* usb1_ovrcur */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_1, 13, 13, 1),
/* conf_usb1_clk_en */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_1, 21, 21, 1),
/* conf_usb1_rst_n */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_1, 23, 23, 1),
},
.custom_claim = fli7510_usb_xtal_claim,
.custom_release = fli7510_usb_xtal_release,
},
[fli7510_usb_ovrcur_active_high] = {
.gpios_num = 2,
.gpios = (struct stm_pad_gpio []) {
STM_PAD_PIO_IN(26, 3, -1), /* USB_A_OVRCUR */
STM_PAD_PIO_OUT(26, 4, 1), /* USB_A_PWREN */
},
.sysconfs_num = 4,
.sysconfs = (struct stm_pad_sysconf []) {
/* usb1_ovrcur_polarity */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_1, 11, 11, 0),
/* usb1_enable_pad_override */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_1, 12, 12, 0),
/* conf_usb1_clk_en */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_1, 21, 21, 1),
/* conf_usb1_rst_n */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_1, 23, 23, 1),
},
.custom_claim = fli7510_usb_xtal_claim,
.custom_release = fli7510_usb_xtal_release,
},
[fli7510_usb_ovrcur_active_low] = {
.gpios_num = 2,
.gpios = (struct stm_pad_gpio []) {
STM_PAD_PIO_IN(26, 3, -1), /* USB_A_OVRCUR */
STM_PAD_PIO_OUT(26, 4, 1), /* USB_A_PWREN */
},
.sysconfs_num = 4,
.sysconfs = (struct stm_pad_sysconf []) {
/* usb1_ovrcur_polarity */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_1, 11, 11, 1),
/* usb1_enable_pad_override */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_1, 12, 12, 0),
/* conf_usb1_clk_en */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_1, 21, 21, 1),
/* conf_usb1_rst_n */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_1, 23, 23, 1),
},
.custom_claim = fli7510_usb_xtal_claim,
.custom_release = fli7510_usb_xtal_release,
}
},
[1] = (struct stm_pad_config []) {
[fli7510_usb_ovrcur_disabled] = {
.gpios_num = 1,
.gpios = (struct stm_pad_gpio []) {
STM_PAD_PIO_OUT(26, 6, 1), /* USB_C_PWREN */
},
.sysconfs_num = 4,
.sysconfs = (struct stm_pad_sysconf []) {
/* usb2_enable_pad_override */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_1, 15, 15, 1),
/* usb2_ovrcur */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_1, 16, 16, 1),
/* conf_usb2_clk_en */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_1, 22, 22, 1),
/* conf_usb2_rst_n */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_1, 24, 24, 1),
},
.custom_claim = fli7510_usb_xtal_claim,
.custom_release = fli7510_usb_xtal_release,
},
[fli7510_usb_ovrcur_active_high] = {
.gpios_num = 2,
.gpios = (struct stm_pad_gpio []) {
STM_PAD_PIO_IN(26, 5, -1), /* USB_C_OVRCUR */
STM_PAD_PIO_OUT(26, 6, 1), /* USB_C_PWREN */
},
.sysconfs_num = 4,
.sysconfs = (struct stm_pad_sysconf []) {
/* usb2_ovrcur_polarity */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_1, 14, 14, 0),
/* usb2_enable_pad_override */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_1, 15, 15, 0),
/* conf_usb2_clk_en */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_1, 22, 22, 1),
/* conf_usb2_rst_n */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_1, 24, 24, 1),
},
.custom_claim = fli7510_usb_xtal_claim,
.custom_release = fli7510_usb_xtal_release,
},
[fli7510_usb_ovrcur_active_low] = {
.gpios_num = 2,
.gpios = (struct stm_pad_gpio []) {
STM_PAD_PIO_IN(26, 5, -1), /* USB_C_OVRCUR */
STM_PAD_PIO_OUT(26, 6, 1), /* USB_C_PWREN */
},
.sysconfs_num = 4,
.sysconfs = (struct stm_pad_sysconf []) {
/* usb2_ovrcur_polarity */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_1, 14, 14, 1),
/* usb2_enable_pad_override */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_1, 15, 15, 0),
/* conf_usb2_clk_en */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_1, 22, 22, 1),
/* conf_usb2_rst_n */
STM_PAD_SYSCONF(CFG_COMMS_CONFIG_1, 24, 24, 1),
},
.custom_claim = fli7510_usb_xtal_claim,
.custom_release = fli7510_usb_xtal_release,
}
},
};
static struct stm_plat_usb_data fli7520_usb_platform_data[] = {
[0] = {
.flags = STM_PLAT_USB_FLAGS_STRAP_8BIT |
STM_PLAT_USB_FLAGS_STRAP_PLL |
STM_PLAT_USB_FLAGS_STBUS_CONFIG_THRESHOLD128,
.device_config = &(struct stm_device_config){
/* .pad_config set in fli7510_configure_usb() */
},
},
[1] = {
.flags = STM_PLAT_USB_FLAGS_STRAP_8BIT |
STM_PLAT_USB_FLAGS_STRAP_PLL |
STM_PLAT_USB_FLAGS_STBUS_CONFIG_THRESHOLD128,
.device_config = &(struct stm_device_config){
/* .pad_config set in fli7510_configure_usb() */
},
},
};
static struct platform_device fli7520_usb_devices[] = {
[0] = {
.name = "stm-usb",
.id = 0,
.dev = {
.dma_mask = &fli7510_usb_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &fli7520_usb_platform_data[0],
},
.num_resources = 6,
.resource = (struct resource[]) {
STM_PLAT_RESOURCE_MEM_NAMED("ehci", 0xfdaffe00, 0x100),
STM_PLAT_RESOURCE_IRQ_NAMED("ehci", ILC_IRQ(54), -1),
STM_PLAT_RESOURCE_MEM_NAMED("ohci", 0xfdaffc00, 0x100),
STM_PLAT_RESOURCE_IRQ_NAMED("ohci", ILC_IRQ(55), -1),
STM_PLAT_RESOURCE_MEM_NAMED("wrapper", 0xfda00000,
0x100),
STM_PLAT_RESOURCE_MEM_NAMED("protocol", 0xfdafff00,
0x100),
},
},
[1] = {
.name = "stm-usb",
.id = 1,
.dev = {
.dma_mask = &fli7510_usb_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &fli7520_usb_platform_data[1],
},
.num_resources = 6,
.resource = (struct resource[]) {
STM_PLAT_RESOURCE_MEM_NAMED("ehci", 0xfdcffe00, 0x100),
STM_PLAT_RESOURCE_IRQ_NAMED("ehci", ILC_IRQ(56), -1),
STM_PLAT_RESOURCE_MEM_NAMED("ohci", 0xfdcffc00, 0x100),
STM_PLAT_RESOURCE_IRQ_NAMED("ohci", ILC_IRQ(57), -1),
STM_PLAT_RESOURCE_MEM_NAMED("wrapper", 0xfdc00000,
0x100),
STM_PLAT_RESOURCE_MEM_NAMED("protocol", 0xfdcfff00,
0x100),
},
}
};
void __init fli7510_configure_usb(int port, struct fli7510_usb_config *config)
{
static int configured[ARRAY_SIZE(fli7520_usb_devices)];
struct fli7510_usb_config default_config;
BUG_ON(port < 0 || port > ARRAY_SIZE(fli7520_usb_devices));
if (port != 0 && cpu_data->type == CPU_FLI7510) {
BUG();
return;
}
BUG_ON(configured[port]++);
if (!config)
config = &default_config;
if (cpu_data->type == CPU_FLI7510) {
fli7510_usb_platform_data.device_config->pad_config =
&fli7510_usb_pad_configs[config->ovrcur_mode];
platform_device_register(&fli7510_usb_device);
} else {
fli7520_usb_platform_data[port].device_config->pad_config =
&fli7520_usb_pad_configs[port]
[config->ovrcur_mode];
platform_device_register(&fli7520_usb_devices[port]);
}
}
/* Cut 0 has a problem with accessing the MiPhy, so we have to use the dummy
* driver as the PCIe driver expects a phy
*/
static struct stm_plat_miphy_dummy_data fli7540_miphy_dummy_platform_data = {
.miphy_first = 0,
.miphy_count = 1,
.miphy_modes = (enum miphy_mode[1]) {PCIE_MODE},
};
static struct platform_device fli7540_miphy_dummy_device = {
.name = "stm-miphy-dummy",
.id = -1,
.num_resources = 0,
.dev = {
.platform_data = &fli7540_miphy_dummy_platform_data,
}
};
static void fli7540_pcie_mp_select(int port)
{
/* Freeman only has one port */
}
struct stm_plat_pcie_mp_data fli7540_pcie_mp_platform_data = {
.miphy_first = 0,
.miphy_count = 1,
.miphy_modes = (enum miphy_mode[1]) {PCIE_MODE},
.mp_select = fli7540_pcie_mp_select,
};
static struct platform_device fli7540_pcie_mp_device = {
.name = "pcie-mp",
.id = -1,
.num_resources = 1,
.resource = (struct resource[]) {
STM_PLAT_RESOURCE_MEM(0xfe104000, 0xff)
},
.dev = {
.platform_data = &fli7540_pcie_mp_platform_data,
}
};
static int __init fli7540_miphy_postcore_setup(void)
{
if (cpu_data->cut_major >= 1)
return platform_device_register(&fli7540_pcie_mp_device);
return platform_device_register(&fli7540_miphy_dummy_device);
}
postcore_initcall(fli7540_miphy_postcore_setup);