satip-axe/kernel/include/sound/stm.h

287 lines
6.5 KiB
C
Raw Normal View History

/*
* STMicrolectronics SoCs audio subsystem
*
* Copyright (c) 2005-2011 STMicroelectronics Limited
*
* Author: Pawel Moll <pawel.moll@st.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#ifndef __SOUND_STM_H
#define __SOUND_STM_H
#include <linux/i2c.h>
#include <linux/stm/pad.h>
#include <sound/core.h>
/*
* Converters (DAC, ADC, I2S to SPDIF, SPDIF to I2S, etc.)
*/
/* Link type (format) description */
#define SND_STM_FORMAT__I2S 0x00000001
#define SND_STM_FORMAT__LEFT_JUSTIFIED 0x00000002
#define SND_STM_FORMAT__RIGHT_JUSTIFIED 0x00000003
#define SND_STM_FORMAT__SPDIF 0x00000004
#define SND_STM_FORMAT__MASK 0x0000000f
/* Following values are valid only for I2S, Left Justified and
* Right justified formats and can be bit-added to format;
* they define size of one subframe (channel) transmitted.
* For SPDIF the frame size is fixed and defined by standard. */
#define SND_STM_FORMAT__SUBFRAME_32_BITS 0x00000010
#define SND_STM_FORMAT__SUBFRAME_16_BITS 0x00000020
#define SND_STM_FORMAT__SUBFRAME_MASK 0x000000f0
/* Converter operations
* All converter should be disabled and muted till explicitly
* enabled/unmuted. */
struct snd_stm_conv_converter;
struct snd_stm_conv_ops {
/* Configuration */
unsigned int (*get_format)(void *priv);
int (*get_oversampling)(void *priv);
/* Operations */
int (*set_enabled)(int enabled, void *priv);
int (*set_muted)(int muted, void *priv);
};
/* Registers new converter
* Converters sharing the same group name shall use the same input format
* and oversampling value - they usually should represent one "output";
* when more than one group is connected to the same source, active one
* will be selectable using "Route" ALSA control.
* Returns negative value on error or unique converter index number (>=0) */
struct snd_stm_conv_converter *snd_stm_conv_register_converter(
const char *group, struct snd_stm_conv_ops *ops, void *priv,
struct bus_type *source_bus, const char *source_bus_id,
int source_channel_from, int source_channel_to, int *index);
int snd_stm_conv_unregister_converter(struct snd_stm_conv_converter *converter);
/*
* Generic conv implementations
*/
/* I2C-controlled DAC/ADC generic implementation
*
* Define a "struct i2c_board_info" with "struct snd_stm_conv_i2c_info"
* as a platform data:
*
* static struct i2c_board_info external_dac __initdata = {
* I2C_BOARD_INFO("snd_conv_i2c", <I2C address>),
* .type = "<i.e. chip model>",
* .platform_data = &(struct snd_stm_conv_i2c_info) {
* <see below>
* },
* };
*
* and add it:
*
* i2c_register_board_info(<I2C bus number>, &external_dac, 1);
*
* If you wish to perform some actions on the device before it
* is being used, you may define "init" callback, which will
* be called with i2c_client pointer during driver probe.
*/
struct snd_stm_conv_i2c_info {
const char *group;
const char *source_bus_id;
int channel_from, channel_to;
unsigned int format;
int oversampling;
int (*init)(struct i2c_client *client, void *priv);
void *priv;
int enable_supported;
const char *enable_cmd;
int enable_cmd_len;
const char *disable_cmd;
int disable_cmd_len;
int mute_supported;
const char *mute_cmd;
int mute_cmd_len;
const char *unmute_cmd;
int unmute_cmd_len;
};
/* GPIO-controlled DAC/ADC generic implementation
*
* Define platform device named "snd_conv_gpio", pass
* following structure as platform_data and add it in normal way :-) */
struct snd_stm_conv_gpio_info {
const char *group;
const char *source_bus_id;
int channel_from, channel_to;
unsigned int format;
int oversampling;
int enable_supported;
unsigned enable_gpio;
int enable_value;
int mute_supported;
unsigned mute_gpio;
int mute_value;
};
/* EPLD-controlled DAC/ADC generic implementation
*
* Define platform device named "snd_conv_epld", pass
* following structure as platform_data and add it in normal way :-) */
struct snd_stm_conv_epld_info {
const char *group;
const char *source_bus_id;
int channel_from, channel_to;
unsigned int format;
int oversampling;
int enable_supported;
unsigned enable_offset;
unsigned enable_mask;
unsigned enable_value;
unsigned disable_value;
int mute_supported;
unsigned mute_offset;
unsigned mute_mask;
unsigned mute_value;
unsigned unmute_value;
};
/* Dummy converter - use it (as a "snd_conv_dummy" platform device)
* to define format or oversampling only */
struct snd_stm_conv_dummy_info {
const char *group;
const char *source_bus_id;
int channel_from, channel_to;
unsigned int format;
int oversampling;
};
/*
* Internal audio DAC descriptions (platform data)
*/
struct snd_stm_conv_dac_mem_info {
const char *source_bus_id;
int channel_from, channel_to;
};
struct snd_stm_conv_dac_sc_info {
const char *source_bus_id;
int channel_from, channel_to;
struct {
int group;
int num;
int lsb;
int msb;
} nrst, mode, nsb, softmute, pdana, pndbg;
};
/*
* I2S to SPDIF converter description (platform data)
*/
struct snd_stm_conv_i2sspdif_info {
int ver;
const char *source_bus_id;
int channel_from, channel_to;
};
/*
* PCM Player description (platform data)
*/
struct snd_stm_pcm_player_info {
const char *name;
int ver;
int card_device;
const char *clock_name;
unsigned int channels;
unsigned char fdma_initiator;
unsigned int fdma_request_line;
struct stm_pad_config *pad_config;
};
/*
* PCM Reader description (platform data)
*/
struct snd_stm_pcm_reader_info {
const char *name;
int ver;
int card_device;
int channels;
unsigned char fdma_initiator;
unsigned int fdma_request_line;
struct stm_pad_config *pad_config;
};
/*
* SPDIF Player description (platform data)
*/
struct snd_stm_spdif_player_info {
const char *name;
int ver;
int card_device;
const char *clock_name;
unsigned char fdma_initiator;
unsigned int fdma_request_line;
struct stm_pad_config *pad_config;
};
#endif