satip-axe/kernel/arch/powerpc/platforms/52xx/lite5200.c

200 lines
5.1 KiB
C
Raw Normal View History

/*
* Freescale Lite5200 board support
*
* Written by: Grant Likely <grant.likely@secretlab.ca>
*
* Copyright (C) Secret Lab Technologies Ltd. 2006. All rights reserved.
* Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
*
* Description:
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#undef DEBUG
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/of.h>
#include <linux/root_dev.h>
#include <linux/initrd.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/prom.h>
#include <asm/mpc52xx.h>
/* ************************************************************************
*
* Setup the architecture
*
*/
/* mpc5200 device tree match tables */
static struct of_device_id mpc5200_cdm_ids[] __initdata = {
{ .compatible = "fsl,mpc5200-cdm", },
{ .compatible = "mpc5200-cdm", },
{}
};
static struct of_device_id mpc5200_gpio_ids[] __initdata = {
{ .compatible = "fsl,mpc5200-gpio", },
{ .compatible = "mpc5200-gpio", },
{}
};
/*
* Fix clock configuration.
*
* Firmware is supposed to be responsible for this. If you are creating a
* new board port, do *NOT* duplicate this code. Fix your boot firmware
* to set it correctly in the first place
*/
static void __init
lite5200_fix_clock_config(void)
{
struct device_node *np;
struct mpc52xx_cdm __iomem *cdm;
/* Map zones */
np = of_find_matching_node(NULL, mpc5200_cdm_ids);
cdm = of_iomap(np, 0);
of_node_put(np);
if (!cdm) {
printk(KERN_ERR "%s() failed; expect abnormal behaviour\n",
__func__);
return;
}
/* Use internal 48 Mhz */
out_8(&cdm->ext_48mhz_en, 0x00);
out_8(&cdm->fd_enable, 0x01);
if (in_be32(&cdm->rstcfg) & 0x40) /* Assumes 33Mhz clock */
out_be16(&cdm->fd_counters, 0x0001);
else
out_be16(&cdm->fd_counters, 0x5555);
/* Unmap the regs */
iounmap(cdm);
}
/*
* Fix setting of port_config register.
*
* Firmware is supposed to be responsible for this. If you are creating a
* new board port, do *NOT* duplicate this code. Fix your boot firmware
* to set it correctly in the first place
*/
static void __init
lite5200_fix_port_config(void)
{
struct device_node *np;
struct mpc52xx_gpio __iomem *gpio;
u32 port_config;
np = of_find_matching_node(NULL, mpc5200_gpio_ids);
gpio = of_iomap(np, 0);
of_node_put(np);
if (!gpio) {
printk(KERN_ERR "%s() failed. expect abnormal behavior\n",
__func__);
return;
}
/* Set port config */
port_config = in_be32(&gpio->port_config);
port_config &= ~0x00800000; /* 48Mhz internal, pin is GPIO */
port_config &= ~0x00007000; /* USB port : Differential mode */
port_config |= 0x00001000; /* USB 1 only */
port_config &= ~0x03000000; /* ATA CS is on csb_4/5 */
port_config |= 0x01000000;
pr_debug("port_config: old:%x new:%x\n",
in_be32(&gpio->port_config), port_config);
out_be32(&gpio->port_config, port_config);
/* Unmap zone */
iounmap(gpio);
}
#ifdef CONFIG_PM
static void lite5200_suspend_prepare(void __iomem *mbar)
{
u8 pin = 1; /* GPIO_WKUP_1 (GPIO_PSC2_4) */
u8 level = 0; /* wakeup on low level */
mpc52xx_set_wakeup_gpio(pin, level);
/*
* power down usb port
* this needs to be called before of-ohci suspend code
*/
/* set ports to "power switched" and "powered at the same time"
* USB Rh descriptor A: NPS = 0, PSM = 0 */
out_be32(mbar + 0x1048, in_be32(mbar + 0x1048) & ~0x300);
/* USB Rh status: LPS = 1 - turn off power */
out_be32(mbar + 0x1050, 0x00000001);
}
static void lite5200_resume_finish(void __iomem *mbar)
{
/* USB Rh status: LPSC = 1 - turn on power */
out_be32(mbar + 0x1050, 0x00010000);
}
#endif
static void __init lite5200_setup_arch(void)
{
if (ppc_md.progress)
ppc_md.progress("lite5200_setup_arch()", 0);
/* Map important registers from the internal memory map */
mpc52xx_map_common_devices();
/* Some mpc5200 & mpc5200b related configuration */
mpc5200_setup_xlb_arbiter();
/* Fix things that firmware should have done. */
lite5200_fix_clock_config();
lite5200_fix_port_config();
#ifdef CONFIG_PM
mpc52xx_suspend.board_suspend_prepare = lite5200_suspend_prepare;
mpc52xx_suspend.board_resume_finish = lite5200_resume_finish;
lite5200_pm_init();
#endif
mpc52xx_setup_pci();
}
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
static int __init lite5200_probe(void)
{
unsigned long node = of_get_flat_dt_root();
const char *model = of_get_flat_dt_prop(node, "model", NULL);
if (!of_flat_dt_is_compatible(node, "fsl,lite5200") &&
!of_flat_dt_is_compatible(node, "fsl,lite5200b"))
return 0;
pr_debug("%s board found\n", model ? model : "unknown");
return 1;
}
define_machine(lite5200) {
.name = "lite5200",
.probe = lite5200_probe,
.setup_arch = lite5200_setup_arch,
.init = mpc52xx_declare_of_platform_devices,
.init_IRQ = mpc52xx_init_irq,
.get_irq = mpc52xx_get_irq,
.restart = mpc52xx_restart,
.calibrate_decr = generic_calibrate_decr,
};