satip-axe/kernel/drivers/net/wimax/i2400m/sdio-fw.c

210 lines
7.0 KiB
C
Raw Normal View History

/*
* Intel Wireless WiMAX Connection 2400m
* Firmware uploader's SDIO specifics
*
*
* Copyright (C) 2007-2008 Intel Corporation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*
* Intel Corporation <linux-wimax@intel.com>
* Yanir Lubetkin <yanirx.lubetkin@intel.com>
* Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
* - Initial implementation
*
* Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
* - Bus generic/specific split for USB
*
* Dirk Brandewie <dirk.j.brandewie@intel.com>
* - Initial implementation for SDIO
*
* Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
* - SDIO rehash for changes in the bus-driver model
*
* Dirk Brandewie <dirk.j.brandewie@intel.com>
* - Make it IRQ based, not polling
*
* THE PROCEDURE
*
* See fw.c for the generic description of this procedure.
*
* This file implements only the SDIO specifics. It boils down to how
* to send a command and waiting for an acknowledgement from the
* device.
*
* All this code is sequential -- all i2400ms_bus_bm_*() functions are
* executed in the same thread, except i2400ms_bm_irq() [on its own by
* the SDIO driver]. This makes it possible to avoid locking.
*
* COMMAND EXECUTION
*
* The generic firmware upload code will call i2400m_bus_bm_cmd_send()
* to send commands.
*
* The SDIO devices expects things in 256 byte blocks, so it will pad
* it, compute the checksum (if needed) and pass it to SDIO.
*
* ACK RECEPTION
*
* This works in IRQ mode -- the fw loader says when to wait for data
* and for that it calls i2400ms_bus_bm_wait_for_ack().
*
* This checks if there is any data available (RX size > 0); if not,
* waits for the IRQ handler to notify about it. Once there is data,
* it is read and passed to the caller. Doing it this way we don't
* need much coordination/locking, and it makes it much more difficult
* for an interrupt to be lost and the wait_for_ack() function getting
* stuck even when data is pending.
*/
#include <linux/mmc/sdio_func.h>
#include "i2400m-sdio.h"
#define D_SUBMODULE fw
#include "sdio-debug-levels.h"
/*
* Send a boot-mode command to the SDIO function
*
* We use a bounce buffer (i2400m->bm_cmd_buf) because we need to
* touch the header if the RAW flag is not set.
*
* @flags: pass thru from i2400m_bm_cmd()
* @return: cmd_size if ok, < 0 errno code on error.
*
* Note the command is padded to the SDIO block size for the device.
*/
ssize_t i2400ms_bus_bm_cmd_send(struct i2400m *i2400m,
const struct i2400m_bootrom_header *_cmd,
size_t cmd_size, int flags)
{
ssize_t result;
struct device *dev = i2400m_dev(i2400m);
struct i2400ms *i2400ms = container_of(i2400m, struct i2400ms, i2400m);
int opcode = _cmd == NULL ? -1 : i2400m_brh_get_opcode(_cmd);
struct i2400m_bootrom_header *cmd;
/* SDIO restriction */
size_t cmd_size_a = ALIGN(cmd_size, I2400MS_BLK_SIZE);
d_fnstart(5, dev, "(i2400m %p cmd %p size %zu)\n",
i2400m, _cmd, cmd_size);
result = -E2BIG;
if (cmd_size > I2400M_BM_CMD_BUF_SIZE)
goto error_too_big;
memcpy(i2400m->bm_cmd_buf, _cmd, cmd_size); /* Prep command */
cmd = i2400m->bm_cmd_buf;
if (cmd_size_a > cmd_size) /* Zero pad space */
memset(i2400m->bm_cmd_buf + cmd_size, 0, cmd_size_a - cmd_size);
if ((flags & I2400M_BM_CMD_RAW) == 0) {
if (WARN_ON(i2400m_brh_get_response_required(cmd) == 0))
dev_warn(dev, "SW BUG: response_required == 0\n");
i2400m_bm_cmd_prepare(cmd);
}
d_printf(4, dev, "BM cmd %d: %zu bytes (%zu padded)\n",
opcode, cmd_size, cmd_size_a);
d_dump(5, dev, cmd, cmd_size);
sdio_claim_host(i2400ms->func); /* Send & check */
result = sdio_memcpy_toio(i2400ms->func, I2400MS_DATA_ADDR,
i2400m->bm_cmd_buf, cmd_size_a);
sdio_release_host(i2400ms->func);
if (result < 0) {
dev_err(dev, "BM cmd %d: cannot send: %ld\n",
opcode, (long) result);
goto error_cmd_send;
}
result = cmd_size;
error_cmd_send:
error_too_big:
d_fnend(5, dev, "(i2400m %p cmd %p size %zu) = %d\n",
i2400m, _cmd, cmd_size, (int) result);
return result;
}
/*
* Read an ack from the device's boot-mode
*
* @i2400m:
* @_ack: pointer to where to store the read data
* @ack_size: how many bytes we should read
*
* Returns: < 0 errno code on error; otherwise, amount of received bytes.
*
* The ACK for a BM command is always at least sizeof(*ack) bytes, so
* check for that. We don't need to check for device reboots
*
*/
ssize_t i2400ms_bus_bm_wait_for_ack(struct i2400m *i2400m,
struct i2400m_bootrom_header *ack,
size_t ack_size)
{
ssize_t result;
struct i2400ms *i2400ms = container_of(i2400m, struct i2400ms, i2400m);
struct sdio_func *func = i2400ms->func;
struct device *dev = &func->dev;
int size;
BUG_ON(sizeof(*ack) > ack_size);
d_fnstart(5, dev, "(i2400m %p ack %p size %zu)\n",
i2400m, ack, ack_size);
spin_lock(&i2400m->rx_lock);
i2400ms->bm_ack_size = -EINPROGRESS;
spin_unlock(&i2400m->rx_lock);
result = wait_event_timeout(i2400ms->bm_wfa_wq,
i2400ms->bm_ack_size != -EINPROGRESS,
2 * HZ);
if (result == 0) {
result = -ETIMEDOUT;
dev_err(dev, "BM: error waiting for an ack\n");
goto error_timeout;
}
spin_lock(&i2400m->rx_lock);
result = i2400ms->bm_ack_size;
BUG_ON(result == -EINPROGRESS);
if (result < 0) /* so we exit when rx_release() is called */
dev_err(dev, "BM: %s failed: %zd\n", __func__, result);
else {
size = min(ack_size, i2400ms->bm_ack_size);
memcpy(ack, i2400m->bm_ack_buf, size);
}
i2400ms->bm_ack_size = -EINPROGRESS;
spin_unlock(&i2400m->rx_lock);
error_timeout:
d_fnend(5, dev, "(i2400m %p ack %p size %zu) = %zd\n",
i2400m, ack, ack_size, result);
return result;
}