satip-axe/kernel/arch/powerpc/boot/dts/katmai.dts

401 lines
12 KiB
Plaintext
Raw Normal View History

/*
* Device Tree Source for AMCC Katmai eval board
*
* Copyright (c) 2006, 2007 IBM Corp.
* Benjamin Herrenschmidt <benh@kernel.crashing.org>
*
* Copyright (c) 2006, 2007 IBM Corp.
* Josh Boyer <jwboyer@linux.vnet.ibm.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without
* any warranty of any kind, whether express or implied.
*/
/dts-v1/;
/ {
#address-cells = <2>;
#size-cells = <1>;
model = "amcc,katmai";
compatible = "amcc,katmai";
dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC0;
serial0 = &UART0;
serial1 = &UART1;
serial2 = &UART2;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
model = "PowerPC,440SPe";
reg = <0x00000000>;
clock-frequency = <0>; /* Filled in by zImage */
timebase-frequency = <0>; /* Filled in by zImage */
i-cache-line-size = <32>;
d-cache-line-size = <32>;
i-cache-size = <32768>;
d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
};
UIC0: interrupt-controller0 {
compatible = "ibm,uic-440spe","ibm,uic";
interrupt-controller;
cell-index = <0>;
dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
};
UIC1: interrupt-controller1 {
compatible = "ibm,uic-440spe","ibm,uic";
interrupt-controller;
cell-index = <1>;
dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
UIC2: interrupt-controller2 {
compatible = "ibm,uic-440spe","ibm,uic";
interrupt-controller;
cell-index = <2>;
dcr-reg = <0x0e0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
UIC3: interrupt-controller3 {
compatible = "ibm,uic-440spe","ibm,uic";
interrupt-controller;
cell-index = <3>;
dcr-reg = <0x0f0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
SDR0: sdr {
compatible = "ibm,sdr-440spe";
dcr-reg = <0x00e 0x002>;
};
CPR0: cpr {
compatible = "ibm,cpr-440spe";
dcr-reg = <0x00c 0x002>;
};
plb {
compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4";
#address-cells = <2>;
#size-cells = <1>;
ranges;
clock-frequency = <0>; /* Filled in by zImage */
SDRAM0: sdram {
compatible = "ibm,sdram-440spe", "ibm,sdram-405gp";
dcr-reg = <0x010 0x002>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-440spe", "ibm,mcmal2";
dcr-reg = <0x180 0x062>;
num-tx-chans = <2>;
num-rx-chans = <1>;
interrupt-parent = <&MAL0>;
interrupts = <0x0 0x1 0x2 0x3 0x4>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-map = </*TXEOB*/ 0x0 &UIC1 0x6 0x4
/*RXEOB*/ 0x1 &UIC1 0x7 0x4
/*SERR*/ 0x2 &UIC1 0x1 0x4
/*TXDE*/ 0x3 &UIC1 0x2 0x4
/*RXDE*/ 0x4 &UIC1 0x3 0x4>;
};
POB0: opb {
compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00000004 0xe0000000 0x20000000>;
clock-frequency = <0>; /* Filled in by zImage */
EBC0: ebc {
compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc";
dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by zImage */
interrupts = <0x5 0x1>;
interrupt-parent = <&UIC1>;
};
UART0: serial@10000200 {
device_type = "serial";
compatible = "ns16550";
reg = <0x10000200 0x00000008>;
virtual-reg = <0xa0000200>;
clock-frequency = <0>; /* Filled in by zImage */
current-speed = <115200>;
interrupt-parent = <&UIC0>;
interrupts = <0x0 0x4>;
};
UART1: serial@10000300 {
device_type = "serial";
compatible = "ns16550";
reg = <0x10000300 0x00000008>;
virtual-reg = <0xa0000300>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC0>;
interrupts = <0x1 0x4>;
};
UART2: serial@10000600 {
device_type = "serial";
compatible = "ns16550";
reg = <0x10000600 0x00000008>;
virtual-reg = <0xa0000600>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC1>;
interrupts = <0x5 0x4>;
};
IIC0: i2c@10000400 {
compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
reg = <0x10000400 0x00000014>;
interrupt-parent = <&UIC0>;
interrupts = <0x2 0x4>;
};
IIC1: i2c@10000500 {
compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
reg = <0x10000500 0x00000014>;
interrupt-parent = <&UIC0>;
interrupts = <0x3 0x4>;
};
EMAC0: ethernet@10000800 {
linux,network-index = <0x0>;
device_type = "network";
compatible = "ibm,emac-440spe", "ibm,emac4";
interrupt-parent = <&UIC1>;
interrupts = <0x1c 0x4 0x1d 0x4>;
reg = <0x10000800 0x00000074>;
local-mac-address = [000000000000];
mal-device = <&MAL0>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
phy-mode = "gmii";
phy-map = <0x00000000>;
has-inverted-stacr-oc;
has-new-stacr-staopc;
};
};
PCIX0: pci@c0ec00000 {
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "ibm,plb-pcix-440spe", "ibm,plb-pcix";
primary;
large-inbound-windows;
enable-msi-hole;
reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */
0x00000000 0x00000000 0x00000000 /* no IACK cycles */
0x0000000c 0x0ed00000 0x00000004 /* Special cycles */
0x0000000c 0x0ec80000 0x00000100 /* Internal registers */
0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 0 to 0xf */
bus-range = <0x0 0xf>;
/*
* On Katmai, the following PCI-X interrupts signals
* have to be enabled via jumpers (only INTA is
* enabled per default):
*
* INTB: J3: 1-2
* INTC: J2: 1-2
* INTD: J1: 1-2
*/
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 1 */
0x800 0x0 0x0 0x1 &UIC1 0x14 0x8
0x800 0x0 0x0 0x2 &UIC1 0x13 0x8
0x800 0x0 0x0 0x3 &UIC1 0x12 0x8
0x800 0x0 0x0 0x4 &UIC1 0x11 0x8
>;
};
PCIE0: pciex@d00000000 {
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
primary;
port = <0x0>; /* port number */
reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */
0x0000000c 0x10000000 0x00001000>; /* Registers */
dcr-reg = <0x100 0x020>;
sdr-base = <0x300>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 10 to 0x1f */
bus-range = <0x10 0x1f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* We are de-swizzling here because the numbers are actually for
* port of the root complex virtual P2P bridge. But I want
* to avoid putting a node for it in the tree, so the numbers
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
};
PCIE1: pciex@d20000000 {
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
primary;
port = <0x1>; /* port number */
reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */
0x0000000c 0x10001000 0x00001000>; /* Registers */
dcr-reg = <0x120 0x020>;
sdr-base = <0x340>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 10 to 0x1f */
bus-range = <0x20 0x2f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* We are de-swizzling here because the numbers are actually for
* port of the root complex virtual P2P bridge. But I want
* to avoid putting a node for it in the tree, so the numbers
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
};
PCIE2: pciex@d40000000 {
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
primary;
port = <0x2>; /* port number */
reg = <0x0000000d 0x40000000 0x20000000 /* Config space access */
0x0000000c 0x10002000 0x00001000>; /* Registers */
dcr-reg = <0x140 0x020>;
sdr-base = <0x370>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000
0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 10 to 0x1f */
bus-range = <0x30 0x3f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* We are de-swizzling here because the numbers are actually for
* port of the root complex virtual P2P bridge. But I want
* to avoid putting a node for it in the tree, so the numbers
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */
0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */
0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */
0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>;
};
};
chosen {
linux,stdout-path = "/plb/opb/serial@10000200";
};
};