satip-axe/kernel/drivers/stm/stx7111_hispeed.c

237 lines
6.6 KiB
C
Raw Normal View History

/*
* (c) 2010 STMicroelectronics Limited
*
* Author: Pawel Moll <pawel.moll@st.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/ethtool.h>
#include <linux/dma-mapping.h>
#include <linux/phy.h>
#include <linux/stm/pad.h>
#include <linux/stm/sysconf.h>
#include <linux/stm/device.h>
#include <linux/stm/emi.h>
#include <linux/stm/stx7111.h>
#include <asm/irq-ilc.h>
/* Ethernet MAC resources ------------------------------------------------- */
static struct stm_pad_config stx7111_ethernet_pad_configs[] = {
[stx7111_ethernet_mode_mii] = {
.sysconfs_num = 4,
.sysconfs = (struct stm_pad_sysconf []) {
/* ETHERNET_INTERFACE_ON: 0 = off, 1 = on */
STM_PAD_SYS_CFG(7, 16, 16, 1),
/* ETHERNET_PHY_CLK_EXT:
* 0 = MII_PHYCLK is an output,
* 1 = MII_PHYCLK is an input
* set by stx7111_configure_ethernet() */
STM_PAD_SYS_CFG(7, 19, 19, -1),
/* ETHERNET_PHY_INTF_SEL: 0 = MII, 4 = RMII */
STM_PAD_SYS_CFG(7, 24, 26, 0),
/* ENMII: 0 = reverse MII, 1 = MII */
STM_PAD_SYS_CFG(7, 27, 27, 1),
},
},
[stx7111_ethernet_mode_rmii] = {
.sysconfs_num = 4,
.sysconfs = (struct stm_pad_sysconf []) {
/* ETHERNET_INTERFACE_ON: 0 = off, 1 = on */
STM_PAD_SYS_CFG(7, 16, 16, 1),
/* ETHERNET_PHY_CLK_EXT:
* 0 = MII_PHYCLK is an output,
* 1 = MII_PHYCLK is an input
* set by stx7111_configure_ethernet() */
STM_PAD_SYS_CFG(7, 19, 19, -1),
/* ETHERNET_PHY_INTF_SEL: 0 = MII, 4 = RMII */
STM_PAD_SYS_CFG(7, 24, 26, 4),
/* ENMII: 0 = reverse MII, 1 = MII */
STM_PAD_SYS_CFG(7, 27, 27, 1),
},
},
[stx7111_ethernet_mode_reverse_mii] = {
.sysconfs_num = 4,
.sysconfs = (struct stm_pad_sysconf []) {
/* ETHERNET_INTERFACE_ON: 0 = off, 1 = on */
STM_PAD_SYS_CFG(7, 16, 16, 1),
/* ETHERNET_PHY_CLK_EXT:
* 0 = MII_PHYCLK is an output,
* 1 = MII_PHYCLK is an input
* set by stx7111_configure_ethernet() */
STM_PAD_SYS_CFG(7, 19, 19, -1),
/* ETHERNET_PHY_INTF_SEL: 0 = MII, 4 = RMII */
STM_PAD_SYS_CFG(7, 24, 26, 0),
/* ENMII: 0 = reverse MII, 1 = MII */
STM_PAD_SYS_CFG(7, 27, 27, 0),
},
},
};
static void stx7111_ethernet_fix_mac_speed(void *bsp_priv, unsigned int speed)
{
struct sysconf_field *mac_speed_sel = bsp_priv;
sysconf_write(mac_speed_sel, (speed == SPEED_100) ? 1 : 0);
}
static struct plat_stmmacenet_data stx7111_ethernet_platform_data = {
.pbl = 32,
.has_gmac = 1,
.enh_desc = 1,
.tx_coe = 1,
.bugged_jumbo =1,
.pmt = 1,
.fix_mac_speed = stx7111_ethernet_fix_mac_speed,
.init = &stmmac_claim_resource,
};
static struct platform_device stx7111_ethernet_device = {
.name = "stmmaceth",
.id = -1,
.num_resources = 2,
.resource = (struct resource[]) {
STM_PLAT_RESOURCE_MEM(0xfd110000, 0x08000),
STM_PLAT_RESOURCE_IRQ_NAMED("macirq", evt2irq(0x12a0), -1),
},
.dev.platform_data = &stx7111_ethernet_platform_data,
};
void __init stx7111_configure_ethernet(struct stx7111_ethernet_config *config)
{
static int configured;
struct stx7111_ethernet_config default_config;
struct stm_pad_config *pad_config;
const int interfaces[] = {
[stx7111_ethernet_mode_mii] = PHY_INTERFACE_MODE_MII,
[stx7111_ethernet_mode_rmii] = PHY_INTERFACE_MODE_RMII,
[stx7111_ethernet_mode_reverse_mii] = PHY_INTERFACE_MODE_MII,
};
BUG_ON(configured);
configured = 1;
if (!config)
config = &default_config;
pad_config = &stx7111_ethernet_pad_configs[config->mode];
stx7111_ethernet_platform_data.custom_cfg = (void *) pad_config;
stx7111_ethernet_platform_data.interface = interfaces[config->mode];
stx7111_ethernet_platform_data.bus_id = config->phy_bus;
stx7111_ethernet_platform_data.phy_addr = config->phy_addr;
stx7111_ethernet_platform_data.mdio_bus_data = config->mdio_bus_data;
pad_config->sysconfs[1].value = (config->ext_clk ? 1 : 0);
/* MAC_SPEED_SEL */
stx7111_ethernet_platform_data.bsp_priv = sysconf_claim(SYS_CFG,
7, 20, 20, "stmmac");
platform_device_register(&stx7111_ethernet_device);
}
/* USB resources ---------------------------------------------------------- */
static u64 stx7111_usb_dma_mask = DMA_BIT_MASK(32);
#define USB_PWR "USB_PWR"
#define USB_ACK "USB_ACK"
static void stx7111_usb_power(struct stm_device_state *device_state,
enum stm_device_power_state power)
{
int i;
int value = (power == stm_device_power_on) ? 0 : 1;
stm_device_sysconf_write(device_state, USB_PWR, value);
for (i = 5; i; --i) {
if (stm_device_sysconf_read(device_state, USB_ACK)
== value)
break;
mdelay(10);
}
}
static struct stm_plat_usb_data stx7111_usb_platform_data = {
.flags = STM_PLAT_USB_FLAGS_STRAP_16BIT |
STM_PLAT_USB_FLAGS_STRAP_PLL |
STM_PLAT_USB_FLAGS_STBUS_CONFIG_THRESHOLD256,
.device_config = &(struct stm_device_config){
.pad_config = &(struct stm_pad_config) {
.gpios_num = 2,
.gpios = (struct stm_pad_gpio []) {
/* Overcurrent detection */
STM_PAD_PIO_IN(5, 6, -1),
/* USB power enable */
STM_PAD_PIO_OUT(5, 7, 1),
},
.sysconfs_num = 1,
.sysconfs = (struct stm_pad_sysconf []) {
/* OC invert, see stx7111_configure_usb() */
STM_PAD_SYS_CFG(6, 29, 29, 0),
},
},
.sysconfs_num = 2,
.sysconfs = (struct stm_device_sysconf []){
STM_DEVICE_SYS_CFG(32, 4, 4, USB_PWR),
STM_DEVICE_SYS_STA(15, 4, 4, USB_ACK),
},
.power = stx7111_usb_power,
},
};
static struct platform_device stx7111_usb_device = {
.name = "stm-usb",
.id = 0,
.dev = {
.dma_mask = &stx7111_usb_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &stx7111_usb_platform_data,
},
.num_resources = 6,
.resource = (struct resource[]) {
STM_PLAT_RESOURCE_MEM_NAMED("ehci", 0xfe1ffe00, 0x100),
STM_PLAT_RESOURCE_IRQ_NAMED("ehci", evt2irq(0x1720), -1),
STM_PLAT_RESOURCE_MEM_NAMED("ohci", 0xfe1ffc00, 0x100),
STM_PLAT_RESOURCE_IRQ_NAMED("ohci", evt2irq(0x1700), -1),
STM_PLAT_RESOURCE_MEM_NAMED("wrapper", 0xfe100000, 0x100),
STM_PLAT_RESOURCE_MEM_NAMED("protocol", 0xfe1fff00, 0x100),
},
};
void __init stx7111_configure_usb(struct stx7111_usb_config *config)
{
static int configured;
struct sysconf_field *sc;
BUG_ON(configured);
configured = 1;
if (config) {
struct stm_device_config *dev_config;
dev_config = stx7111_usb_platform_data.device_config;
dev_config->pad_config->sysconfs[0].value =
(config->invert_ovrcur ? 1 : 0);
/* USB edge rise and DC shift - STLinux Bugzilla 10991 */
sc = sysconf_claim(SYS_CFG, 4, 3, 4, "USB");
sysconf_write(sc, 2);
}
platform_device_register(&stx7111_usb_device);
}