satip-axe/kernel/arch/mips/pci/pci-ip27.c

229 lines
5.6 KiB
C
Raw Normal View History

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2003 Christoph Hellwig (hch@lst.de)
* Copyright (C) 1999, 2000, 04 Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/smp.h>
#include <asm/sn/arch.h>
#include <asm/pci/bridge.h>
#include <asm/paccess.h>
#include <asm/sn/intr.h>
#include <asm/sn/sn0/hub.h>
/*
* Max #PCI busses we can handle; ie, max #PCI bridges.
*/
#define MAX_PCI_BUSSES 40
/*
* Max #PCI devices (like scsi controllers) we handle on a bus.
*/
#define MAX_DEVICES_PER_PCIBUS 8
/*
* XXX: No kmalloc available when we do our crosstalk scan,
* we should try to move it later in the boot process.
*/
static struct bridge_controller bridges[MAX_PCI_BUSSES];
/*
* Translate from irq to software PCI bus number and PCI slot.
*/
struct bridge_controller *irq_to_bridge[MAX_PCI_BUSSES * MAX_DEVICES_PER_PCIBUS];
int irq_to_slot[MAX_PCI_BUSSES * MAX_DEVICES_PER_PCIBUS];
extern struct pci_ops bridge_pci_ops;
int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid)
{
unsigned long offset = NODE_OFFSET(nasid);
struct bridge_controller *bc;
static int num_bridges = 0;
bridge_t *bridge;
int slot;
pci_probe_only = 1;
printk("a bridge\n");
/* XXX: kludge alert.. */
if (!num_bridges)
ioport_resource.end = ~0UL;
bc = &bridges[num_bridges];
bc->pc.pci_ops = &bridge_pci_ops;
bc->pc.mem_resource = &bc->mem;
bc->pc.io_resource = &bc->io;
bc->pc.index = num_bridges;
bc->mem.name = "Bridge PCI MEM";
bc->pc.mem_offset = offset;
bc->mem.start = 0;
bc->mem.end = ~0UL;
bc->mem.flags = IORESOURCE_MEM;
bc->io.name = "Bridge IO MEM";
bc->pc.io_offset = offset;
bc->io.start = 0UL;
bc->io.end = ~0UL;
bc->io.flags = IORESOURCE_IO;
bc->irq_cpu = smp_processor_id();
bc->widget_id = widget_id;
bc->nasid = nasid;
bc->baddr = (u64)masterwid << 60 | PCI64_ATTR_BAR;
/*
* point to this bridge
*/
bridge = (bridge_t *) RAW_NODE_SWIN_BASE(nasid, widget_id);
/*
* Clear all pending interrupts.
*/
bridge->b_int_rst_stat = BRIDGE_IRR_ALL_CLR;
/*
* Until otherwise set up, assume all interrupts are from slot 0
*/
bridge->b_int_device = 0x0;
/*
* swap pio's to pci mem and io space (big windows)
*/
bridge->b_wid_control |= BRIDGE_CTRL_IO_SWAP |
BRIDGE_CTRL_MEM_SWAP;
#ifdef CONFIG_PAGE_SIZE_4KB
bridge->b_wid_control &= ~BRIDGE_CTRL_PAGE_SIZE;
#else /* 16kB or larger */
bridge->b_wid_control |= BRIDGE_CTRL_PAGE_SIZE;
#endif
/*
* Hmm... IRIX sets additional bits in the address which
* are documented as reserved in the bridge docs.
*/
bridge->b_wid_int_upper = 0x8000 | (masterwid << 16);
bridge->b_wid_int_lower = 0x01800090; /* PI_INT_PEND_MOD off*/
bridge->b_dir_map = (masterwid << 20); /* DMA */
bridge->b_int_enable = 0;
for (slot = 0; slot < 8; slot ++) {
bridge->b_device[slot].reg |= BRIDGE_DEV_SWAP_DIR;
bc->pci_int[slot] = -1;
}
bridge->b_wid_tflush; /* wait until Bridge PIO complete */
bc->base = bridge;
register_pci_controller(&bc->pc);
num_bridges++;
return 0;
}
/*
* All observed requests have pin == 1. We could have a global here, that
* gets incremented and returned every time - unfortunately, pci_map_irq
* may be called on the same device over and over, and need to return the
* same value. On O2000, pin can be 0 or 1, and PCI slots can be [0..7].
*
* A given PCI device, in general, should be able to intr any of the cpus
* on any one of the hubs connected to its xbow.
*/
int __devinit pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
return 0;
}
static inline struct pci_dev *bridge_root_dev(struct pci_dev *dev)
{
while (dev->bus->parent) {
/* Move up the chain of bridges. */
dev = dev->bus->self;
}
return dev;
}
/* Do platform specific device initialization at pci_enable_device() time */
int pcibios_plat_dev_init(struct pci_dev *dev)
{
struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
struct pci_dev *rdev = bridge_root_dev(dev);
int slot = PCI_SLOT(rdev->devfn);
int irq;
irq = bc->pci_int[slot];
if (irq == -1) {
irq = request_bridge_irq(bc);
if (irq < 0)
return irq;
bc->pci_int[slot] = irq;
}
irq_to_bridge[irq] = bc;
irq_to_slot[irq] = slot;
dev->irq = irq;
return 0;
}
/*
* Device might live on a subordinate PCI bus. XXX Walk up the chain of buses
* to find the slot number in sense of the bridge device register.
* XXX This also means multiple devices might rely on conflicting bridge
* settings.
*/
static inline void pci_disable_swapping(struct pci_dev *dev)
{
struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
bridge_t *bridge = bc->base;
int slot = PCI_SLOT(dev->devfn);
/* Turn off byte swapping */
bridge->b_device[slot].reg &= ~BRIDGE_DEV_SWAP_DIR;
bridge->b_widget.w_tflush; /* Flush */
}
static inline void pci_enable_swapping(struct pci_dev *dev)
{
struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
bridge_t *bridge = bc->base;
int slot = PCI_SLOT(dev->devfn);
/* Turn on byte swapping */
bridge->b_device[slot].reg |= BRIDGE_DEV_SWAP_DIR;
bridge->b_widget.w_tflush; /* Flush */
}
static void __init pci_fixup_ioc3(struct pci_dev *d)
{
pci_disable_swapping(d);
}
int pcibus_to_node(struct pci_bus *bus)
{
struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
return bc->nasid;
}
EXPORT_SYMBOL(pcibus_to_node);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
pci_fixup_ioc3);