306 lines
9.6 KiB
C
306 lines
9.6 KiB
C
|
/**
|
||
|
|
* This file contains definitions of WLAN commands.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifndef _LBS_HOST_H_
|
||
|
|
#define _LBS_HOST_H_
|
||
|
|
|
||
|
|
/** PUBLIC DEFINITIONS */
|
||
|
|
#define DEFAULT_AD_HOC_CHANNEL 6
|
||
|
|
#define DEFAULT_AD_HOC_CHANNEL_A 36
|
||
|
|
|
||
|
|
#define CMD_OPTION_WAITFORRSP 0x0002
|
||
|
|
|
||
|
|
/** Host command IDs */
|
||
|
|
|
||
|
|
/* Return command are almost always the same as the host command, but with
|
||
|
|
* bit 15 set high. There are a few exceptions, though...
|
||
|
|
*/
|
||
|
|
#define CMD_RET(cmd) (0x8000 | cmd)
|
||
|
|
|
||
|
|
/* Return command convention exceptions: */
|
||
|
|
#define CMD_RET_802_11_ASSOCIATE 0x8012
|
||
|
|
|
||
|
|
/* Command codes */
|
||
|
|
#define CMD_GET_HW_SPEC 0x0003
|
||
|
|
#define CMD_EEPROM_UPDATE 0x0004
|
||
|
|
#define CMD_802_11_RESET 0x0005
|
||
|
|
#define CMD_802_11_SCAN 0x0006
|
||
|
|
#define CMD_802_11_GET_LOG 0x000b
|
||
|
|
#define CMD_MAC_MULTICAST_ADR 0x0010
|
||
|
|
#define CMD_802_11_AUTHENTICATE 0x0011
|
||
|
|
#define CMD_802_11_EEPROM_ACCESS 0x0059
|
||
|
|
#define CMD_802_11_ASSOCIATE 0x0050
|
||
|
|
#define CMD_802_11_SET_WEP 0x0013
|
||
|
|
#define CMD_802_11_GET_STAT 0x0014
|
||
|
|
#define CMD_802_3_GET_STAT 0x0015
|
||
|
|
#define CMD_802_11_SNMP_MIB 0x0016
|
||
|
|
#define CMD_MAC_REG_MAP 0x0017
|
||
|
|
#define CMD_BBP_REG_MAP 0x0018
|
||
|
|
#define CMD_MAC_REG_ACCESS 0x0019
|
||
|
|
#define CMD_BBP_REG_ACCESS 0x001a
|
||
|
|
#define CMD_RF_REG_ACCESS 0x001b
|
||
|
|
#define CMD_802_11_RADIO_CONTROL 0x001c
|
||
|
|
#define CMD_802_11_RF_CHANNEL 0x001d
|
||
|
|
#define CMD_802_11_RF_TX_POWER 0x001e
|
||
|
|
#define CMD_802_11_RSSI 0x001f
|
||
|
|
#define CMD_802_11_RF_ANTENNA 0x0020
|
||
|
|
#define CMD_802_11_PS_MODE 0x0021
|
||
|
|
#define CMD_802_11_DATA_RATE 0x0022
|
||
|
|
#define CMD_RF_REG_MAP 0x0023
|
||
|
|
#define CMD_802_11_DEAUTHENTICATE 0x0024
|
||
|
|
#define CMD_802_11_REASSOCIATE 0x0025
|
||
|
|
#define CMD_MAC_CONTROL 0x0028
|
||
|
|
#define CMD_802_11_AD_HOC_START 0x002b
|
||
|
|
#define CMD_802_11_AD_HOC_JOIN 0x002c
|
||
|
|
#define CMD_802_11_QUERY_TKIP_REPLY_CNTRS 0x002e
|
||
|
|
#define CMD_802_11_ENABLE_RSN 0x002f
|
||
|
|
#define CMD_802_11_SET_AFC 0x003c
|
||
|
|
#define CMD_802_11_GET_AFC 0x003d
|
||
|
|
#define CMD_802_11_AD_HOC_STOP 0x0040
|
||
|
|
#define CMD_802_11_HOST_SLEEP_CFG 0x0043
|
||
|
|
#define CMD_802_11_WAKEUP_CONFIRM 0x0044
|
||
|
|
#define CMD_802_11_HOST_SLEEP_ACTIVATE 0x0045
|
||
|
|
#define CMD_802_11_BEACON_STOP 0x0049
|
||
|
|
#define CMD_802_11_MAC_ADDRESS 0x004d
|
||
|
|
#define CMD_802_11_LED_GPIO_CTRL 0x004e
|
||
|
|
#define CMD_802_11_EEPROM_ACCESS 0x0059
|
||
|
|
#define CMD_802_11_BAND_CONFIG 0x0058
|
||
|
|
#define CMD_GSPI_BUS_CONFIG 0x005a
|
||
|
|
#define CMD_802_11D_DOMAIN_INFO 0x005b
|
||
|
|
#define CMD_802_11_KEY_MATERIAL 0x005e
|
||
|
|
#define CMD_802_11_SLEEP_PARAMS 0x0066
|
||
|
|
#define CMD_802_11_INACTIVITY_TIMEOUT 0x0067
|
||
|
|
#define CMD_802_11_SLEEP_PERIOD 0x0068
|
||
|
|
#define CMD_802_11_TPC_CFG 0x0072
|
||
|
|
#define CMD_802_11_PA_CFG 0x0073
|
||
|
|
#define CMD_802_11_FW_WAKE_METHOD 0x0074
|
||
|
|
#define CMD_802_11_SUBSCRIBE_EVENT 0x0075
|
||
|
|
#define CMD_802_11_RATE_ADAPT_RATESET 0x0076
|
||
|
|
#define CMD_802_11_TX_RATE_QUERY 0x007f
|
||
|
|
#define CMD_GET_TSF 0x0080
|
||
|
|
#define CMD_BT_ACCESS 0x0087
|
||
|
|
#define CMD_FWT_ACCESS 0x0095
|
||
|
|
#define CMD_802_11_MONITOR_MODE 0x0098
|
||
|
|
#define CMD_MESH_ACCESS 0x009b
|
||
|
|
#define CMD_MESH_CONFIG_OLD 0x00a3
|
||
|
|
#define CMD_MESH_CONFIG 0x00ac
|
||
|
|
#define CMD_SET_BOOT2_VER 0x00a5
|
||
|
|
#define CMD_FUNC_INIT 0x00a9
|
||
|
|
#define CMD_FUNC_SHUTDOWN 0x00aa
|
||
|
|
#define CMD_802_11_BEACON_CTRL 0x00b0
|
||
|
|
|
||
|
|
/* For the IEEE Power Save */
|
||
|
|
#define CMD_SUBCMD_ENTER_PS 0x0030
|
||
|
|
#define CMD_SUBCMD_EXIT_PS 0x0031
|
||
|
|
#define CMD_SUBCMD_SLEEP_CONFIRMED 0x0034
|
||
|
|
#define CMD_SUBCMD_FULL_POWERDOWN 0x0035
|
||
|
|
#define CMD_SUBCMD_FULL_POWERUP 0x0036
|
||
|
|
|
||
|
|
#define CMD_ENABLE_RSN 0x0001
|
||
|
|
#define CMD_DISABLE_RSN 0x0000
|
||
|
|
|
||
|
|
#define CMD_ACT_GET 0x0000
|
||
|
|
#define CMD_ACT_SET 0x0001
|
||
|
|
#define CMD_ACT_GET_AES 0x0002
|
||
|
|
#define CMD_ACT_SET_AES 0x0003
|
||
|
|
#define CMD_ACT_REMOVE_AES 0x0004
|
||
|
|
|
||
|
|
/* Define action or option for CMD_802_11_SET_WEP */
|
||
|
|
#define CMD_ACT_ADD 0x0002
|
||
|
|
#define CMD_ACT_REMOVE 0x0004
|
||
|
|
#define CMD_ACT_USE_DEFAULT 0x0008
|
||
|
|
|
||
|
|
#define CMD_TYPE_WEP_40_BIT 0x01
|
||
|
|
#define CMD_TYPE_WEP_104_BIT 0x02
|
||
|
|
|
||
|
|
#define CMD_NUM_OF_WEP_KEYS 4
|
||
|
|
|
||
|
|
#define CMD_WEP_KEY_INDEX_MASK 0x3fff
|
||
|
|
|
||
|
|
/* Define action or option for CMD_802_11_RESET */
|
||
|
|
#define CMD_ACT_HALT 0x0003
|
||
|
|
|
||
|
|
/* Define action or option for CMD_802_11_SCAN */
|
||
|
|
#define CMD_BSS_TYPE_BSS 0x0001
|
||
|
|
#define CMD_BSS_TYPE_IBSS 0x0002
|
||
|
|
#define CMD_BSS_TYPE_ANY 0x0003
|
||
|
|
|
||
|
|
/* Define action or option for CMD_802_11_SCAN */
|
||
|
|
#define CMD_SCAN_TYPE_ACTIVE 0x0000
|
||
|
|
#define CMD_SCAN_TYPE_PASSIVE 0x0001
|
||
|
|
|
||
|
|
#define CMD_SCAN_RADIO_TYPE_BG 0
|
||
|
|
|
||
|
|
#define CMD_SCAN_PROBE_DELAY_TIME 0
|
||
|
|
|
||
|
|
/* Define action or option for CMD_MAC_CONTROL */
|
||
|
|
#define CMD_ACT_MAC_RX_ON 0x0001
|
||
|
|
#define CMD_ACT_MAC_TX_ON 0x0002
|
||
|
|
#define CMD_ACT_MAC_LOOPBACK_ON 0x0004
|
||
|
|
#define CMD_ACT_MAC_WEP_ENABLE 0x0008
|
||
|
|
#define CMD_ACT_MAC_INT_ENABLE 0x0010
|
||
|
|
#define CMD_ACT_MAC_MULTICAST_ENABLE 0x0020
|
||
|
|
#define CMD_ACT_MAC_BROADCAST_ENABLE 0x0040
|
||
|
|
#define CMD_ACT_MAC_PROMISCUOUS_ENABLE 0x0080
|
||
|
|
#define CMD_ACT_MAC_ALL_MULTICAST_ENABLE 0x0100
|
||
|
|
#define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE 0x0400
|
||
|
|
|
||
|
|
/* Event flags for CMD_802_11_SUBSCRIBE_EVENT */
|
||
|
|
#define CMD_SUBSCRIBE_RSSI_LOW 0x0001
|
||
|
|
#define CMD_SUBSCRIBE_SNR_LOW 0x0002
|
||
|
|
#define CMD_SUBSCRIBE_FAILCOUNT 0x0004
|
||
|
|
#define CMD_SUBSCRIBE_BCNMISS 0x0008
|
||
|
|
#define CMD_SUBSCRIBE_RSSI_HIGH 0x0010
|
||
|
|
#define CMD_SUBSCRIBE_SNR_HIGH 0x0020
|
||
|
|
|
||
|
|
#define RADIO_PREAMBLE_LONG 0x00
|
||
|
|
#define RADIO_PREAMBLE_SHORT 0x02
|
||
|
|
#define RADIO_PREAMBLE_AUTO 0x04
|
||
|
|
|
||
|
|
/* Define action or option for CMD_802_11_RF_CHANNEL */
|
||
|
|
#define CMD_OPT_802_11_RF_CHANNEL_GET 0x00
|
||
|
|
#define CMD_OPT_802_11_RF_CHANNEL_SET 0x01
|
||
|
|
|
||
|
|
/* Define action or option for CMD_802_11_DATA_RATE */
|
||
|
|
#define CMD_ACT_SET_TX_AUTO 0x0000
|
||
|
|
#define CMD_ACT_SET_TX_FIX_RATE 0x0001
|
||
|
|
#define CMD_ACT_GET_TX_RATE 0x0002
|
||
|
|
|
||
|
|
#define CMD_ACT_SET_RX 0x0001
|
||
|
|
#define CMD_ACT_SET_TX 0x0002
|
||
|
|
#define CMD_ACT_SET_BOTH 0x0003
|
||
|
|
#define CMD_ACT_GET_RX 0x0004
|
||
|
|
#define CMD_ACT_GET_TX 0x0008
|
||
|
|
#define CMD_ACT_GET_BOTH 0x000c
|
||
|
|
|
||
|
|
/* Define action or option for CMD_802_11_PS_MODE */
|
||
|
|
#define CMD_TYPE_CAM 0x0000
|
||
|
|
#define CMD_TYPE_MAX_PSP 0x0001
|
||
|
|
#define CMD_TYPE_FAST_PSP 0x0002
|
||
|
|
|
||
|
|
/* Options for CMD_802_11_FW_WAKE_METHOD */
|
||
|
|
#define CMD_WAKE_METHOD_UNCHANGED 0x0000
|
||
|
|
#define CMD_WAKE_METHOD_COMMAND_INT 0x0001
|
||
|
|
#define CMD_WAKE_METHOD_GPIO 0x0002
|
||
|
|
|
||
|
|
/* Object IDs for CMD_802_11_SNMP_MIB */
|
||
|
|
#define SNMP_MIB_OID_BSS_TYPE 0x0000
|
||
|
|
#define SNMP_MIB_OID_OP_RATE_SET 0x0001
|
||
|
|
#define SNMP_MIB_OID_BEACON_PERIOD 0x0002 /* Reserved on v9+ */
|
||
|
|
#define SNMP_MIB_OID_DTIM_PERIOD 0x0003 /* Reserved on v9+ */
|
||
|
|
#define SNMP_MIB_OID_ASSOC_TIMEOUT 0x0004 /* Reserved on v9+ */
|
||
|
|
#define SNMP_MIB_OID_RTS_THRESHOLD 0x0005
|
||
|
|
#define SNMP_MIB_OID_SHORT_RETRY_LIMIT 0x0006
|
||
|
|
#define SNMP_MIB_OID_LONG_RETRY_LIMIT 0x0007
|
||
|
|
#define SNMP_MIB_OID_FRAG_THRESHOLD 0x0008
|
||
|
|
#define SNMP_MIB_OID_11D_ENABLE 0x0009
|
||
|
|
#define SNMP_MIB_OID_11H_ENABLE 0x000A
|
||
|
|
|
||
|
|
/* Define action or option for CMD_BT_ACCESS */
|
||
|
|
enum cmd_bt_access_opts {
|
||
|
|
/* The bt commands start at 5 instead of 1 because the old dft commands
|
||
|
|
* are mapped to 1-4. These old commands are no longer maintained and
|
||
|
|
* should not be called.
|
||
|
|
*/
|
||
|
|
CMD_ACT_BT_ACCESS_ADD = 5,
|
||
|
|
CMD_ACT_BT_ACCESS_DEL,
|
||
|
|
CMD_ACT_BT_ACCESS_LIST,
|
||
|
|
CMD_ACT_BT_ACCESS_RESET,
|
||
|
|
CMD_ACT_BT_ACCESS_SET_INVERT,
|
||
|
|
CMD_ACT_BT_ACCESS_GET_INVERT
|
||
|
|
};
|
||
|
|
|
||
|
|
/* Define action or option for CMD_FWT_ACCESS */
|
||
|
|
enum cmd_fwt_access_opts {
|
||
|
|
CMD_ACT_FWT_ACCESS_ADD = 1,
|
||
|
|
CMD_ACT_FWT_ACCESS_DEL,
|
||
|
|
CMD_ACT_FWT_ACCESS_LOOKUP,
|
||
|
|
CMD_ACT_FWT_ACCESS_LIST,
|
||
|
|
CMD_ACT_FWT_ACCESS_LIST_ROUTE,
|
||
|
|
CMD_ACT_FWT_ACCESS_LIST_NEIGHBOR,
|
||
|
|
CMD_ACT_FWT_ACCESS_RESET,
|
||
|
|
CMD_ACT_FWT_ACCESS_CLEANUP,
|
||
|
|
CMD_ACT_FWT_ACCESS_TIME,
|
||
|
|
};
|
||
|
|
|
||
|
|
/* Define action or option for CMD_802_11_HOST_SLEEP_CFG */
|
||
|
|
enum cmd_wol_cfg_opts {
|
||
|
|
CMD_ACT_ACTION_NONE = 0,
|
||
|
|
CMD_ACT_SET_WOL_RULE,
|
||
|
|
CMD_ACT_GET_WOL_RULE,
|
||
|
|
CMD_ACT_RESET_WOL_RULE,
|
||
|
|
};
|
||
|
|
|
||
|
|
/* Define action or option for CMD_MESH_ACCESS */
|
||
|
|
enum cmd_mesh_access_opts {
|
||
|
|
CMD_ACT_MESH_GET_TTL = 1,
|
||
|
|
CMD_ACT_MESH_SET_TTL,
|
||
|
|
CMD_ACT_MESH_GET_STATS,
|
||
|
|
CMD_ACT_MESH_GET_ANYCAST,
|
||
|
|
CMD_ACT_MESH_SET_ANYCAST,
|
||
|
|
CMD_ACT_MESH_SET_LINK_COSTS,
|
||
|
|
CMD_ACT_MESH_GET_LINK_COSTS,
|
||
|
|
CMD_ACT_MESH_SET_BCAST_RATE,
|
||
|
|
CMD_ACT_MESH_GET_BCAST_RATE,
|
||
|
|
CMD_ACT_MESH_SET_RREQ_DELAY,
|
||
|
|
CMD_ACT_MESH_GET_RREQ_DELAY,
|
||
|
|
CMD_ACT_MESH_SET_ROUTE_EXP,
|
||
|
|
CMD_ACT_MESH_GET_ROUTE_EXP,
|
||
|
|
CMD_ACT_MESH_SET_AUTOSTART_ENABLED,
|
||
|
|
CMD_ACT_MESH_GET_AUTOSTART_ENABLED,
|
||
|
|
CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT = 17,
|
||
|
|
};
|
||
|
|
|
||
|
|
/* Define actions and types for CMD_MESH_CONFIG */
|
||
|
|
enum cmd_mesh_config_actions {
|
||
|
|
CMD_ACT_MESH_CONFIG_STOP = 0,
|
||
|
|
CMD_ACT_MESH_CONFIG_START,
|
||
|
|
CMD_ACT_MESH_CONFIG_SET,
|
||
|
|
CMD_ACT_MESH_CONFIG_GET,
|
||
|
|
};
|
||
|
|
|
||
|
|
enum cmd_mesh_config_types {
|
||
|
|
CMD_TYPE_MESH_SET_BOOTFLAG = 1,
|
||
|
|
CMD_TYPE_MESH_SET_BOOTTIME,
|
||
|
|
CMD_TYPE_MESH_SET_DEF_CHANNEL,
|
||
|
|
CMD_TYPE_MESH_SET_MESH_IE,
|
||
|
|
CMD_TYPE_MESH_GET_DEFAULTS,
|
||
|
|
CMD_TYPE_MESH_GET_MESH_IE, /* GET_DEFAULTS is superset of GET_MESHIE */
|
||
|
|
};
|
||
|
|
|
||
|
|
/** Card Event definition */
|
||
|
|
#define MACREG_INT_CODE_TX_PPA_FREE 0
|
||
|
|
#define MACREG_INT_CODE_TX_DMA_DONE 1
|
||
|
|
#define MACREG_INT_CODE_LINK_LOST_W_SCAN 2
|
||
|
|
#define MACREG_INT_CODE_LINK_LOST_NO_SCAN 3
|
||
|
|
#define MACREG_INT_CODE_LINK_SENSED 4
|
||
|
|
#define MACREG_INT_CODE_CMD_FINISHED 5
|
||
|
|
#define MACREG_INT_CODE_MIB_CHANGED 6
|
||
|
|
#define MACREG_INT_CODE_INIT_DONE 7
|
||
|
|
#define MACREG_INT_CODE_DEAUTHENTICATED 8
|
||
|
|
#define MACREG_INT_CODE_DISASSOCIATED 9
|
||
|
|
#define MACREG_INT_CODE_PS_AWAKE 10
|
||
|
|
#define MACREG_INT_CODE_PS_SLEEP 11
|
||
|
|
#define MACREG_INT_CODE_MIC_ERR_MULTICAST 13
|
||
|
|
#define MACREG_INT_CODE_MIC_ERR_UNICAST 14
|
||
|
|
#define MACREG_INT_CODE_WM_AWAKE 15
|
||
|
|
#define MACREG_INT_CODE_DEEP_SLEEP_AWAKE 16
|
||
|
|
#define MACREG_INT_CODE_ADHOC_BCN_LOST 17
|
||
|
|
#define MACREG_INT_CODE_HOST_AWAKE 18
|
||
|
|
#define MACREG_INT_CODE_STOP_TX 19
|
||
|
|
#define MACREG_INT_CODE_START_TX 20
|
||
|
|
#define MACREG_INT_CODE_CHANNEL_SWITCH 21
|
||
|
|
#define MACREG_INT_CODE_MEASUREMENT_RDY 22
|
||
|
|
#define MACREG_INT_CODE_WMM_CHANGE 23
|
||
|
|
#define MACREG_INT_CODE_BG_SCAN_REPORT 24
|
||
|
|
#define MACREG_INT_CODE_RSSI_LOW 25
|
||
|
|
#define MACREG_INT_CODE_SNR_LOW 26
|
||
|
|
#define MACREG_INT_CODE_MAX_FAIL 27
|
||
|
|
#define MACREG_INT_CODE_RSSI_HIGH 28
|
||
|
|
#define MACREG_INT_CODE_SNR_HIGH 29
|
||
|
|
#define MACREG_INT_CODE_MESH_AUTO_STARTED 35
|
||
|
|
#define MACREG_INT_CODE_FIRMWARE_READY 48
|
||
|
|
|
||
|
|
#endif
|