satip-axe/kernel/include/linux/usb/langwell_udc.h

311 lines
12 KiB
C
Raw Normal View History

/*
* Intel Langwell USB Device Controller driver
* Copyright (C) 2008-2009, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*
*/
#ifndef __LANGWELL_UDC_H
#define __LANGWELL_UDC_H
/* MACRO defines */
#define CAP_REG_OFFSET 0x0
#define OP_REG_OFFSET 0x28
#define DMA_ADDR_INVALID (~(dma_addr_t)0)
#define DQH_ALIGNMENT 2048
#define DTD_ALIGNMENT 64
#define DMA_BOUNDARY 4096
#define EP0_MAX_PKT_SIZE 64
#define EP_DIR_IN 1
#define EP_DIR_OUT 0
#define FLUSH_TIMEOUT 1000
#define RESET_TIMEOUT 1000
#define SETUPSTAT_TIMEOUT 100
#define PRIME_TIMEOUT 100
/* device memory space registers */
/* Capability Registers, BAR0 + CAP_REG_OFFSET */
struct langwell_cap_regs {
/* offset: 0x0 */
u8 caplength; /* offset of Operational Register */
u8 _reserved3;
u16 hciversion; /* H: BCD encoding of host version */
u32 hcsparams; /* H: host port steering logic capability */
u32 hccparams; /* H: host multiple mode control capability */
#define HCC_LEN BIT(17) /* Link power management (LPM) capability */
u8 _reserved4[0x20-0xc];
/* offset: 0x20 */
u16 dciversion; /* BCD encoding of device version */
u8 _reserved5[0x24-0x22];
u32 dccparams; /* overall device controller capability */
#define HOSTCAP BIT(8) /* host capable */
#define DEVCAP BIT(7) /* device capable */
#define DEN(d) \
(((d)>>0)&0x1f) /* bits 4:0, device endpoint number */
} __attribute__ ((packed));
/* Operational Registers, BAR0 + OP_REG_OFFSET */
struct langwell_op_regs {
/* offset: 0x28 */
u32 extsts;
#define EXTS_TI1 BIT(4) /* general purpose timer interrupt 1 */
#define EXTS_TI1TI0 BIT(3) /* general purpose timer interrupt 0 */
#define EXTS_TI1UPI BIT(2) /* USB host periodic interrupt */
#define EXTS_TI1UAI BIT(1) /* USB host asynchronous interrupt */
#define EXTS_TI1NAKI BIT(0) /* NAK interrupt */
u32 extintr;
#define EXTI_TIE1 BIT(4) /* general purpose timer interrupt enable 1 */
#define EXTI_TIE0 BIT(3) /* general purpose timer interrupt enable 0 */
#define EXTI_UPIE BIT(2) /* USB host periodic interrupt enable */
#define EXTI_UAIE BIT(1) /* USB host asynchronous interrupt enable */
#define EXTI_NAKE BIT(0) /* NAK interrupt enable */
/* offset: 0x30 */
u32 usbcmd;
#define CMD_HIRD(u) \
(((u)>>24)&0xf) /* bits 27:24, host init resume duration */
#define CMD_ITC(u) \
(((u)>>16)&0xff) /* bits 23:16, interrupt threshold control */
#define CMD_PPE BIT(15) /* per-port change events enable */
#define CMD_ATDTW BIT(14) /* add dTD tripwire */
#define CMD_SUTW BIT(13) /* setup tripwire */
#define CMD_ASPE BIT(11) /* asynchronous schedule park mode enable */
#define CMD_FS2 BIT(10) /* frame list size */
#define CMD_ASP1 BIT(9) /* asynchronous schedule park mode count */
#define CMD_ASP0 BIT(8)
#define CMD_LR BIT(7) /* light host/device controller reset */
#define CMD_IAA BIT(6) /* interrupt on async advance doorbell */
#define CMD_ASE BIT(5) /* asynchronous schedule enable */
#define CMD_PSE BIT(4) /* periodic schedule enable */
#define CMD_FS1 BIT(3)
#define CMD_FS0 BIT(2)
#define CMD_RST BIT(1) /* controller reset */
#define CMD_RUNSTOP BIT(0) /* run/stop */
u32 usbsts;
#define STS_PPCI(u) \
(((u)>>16)&0xffff) /* bits 31:16, port-n change detect */
#define STS_AS BIT(15) /* asynchronous schedule status */
#define STS_PS BIT(14) /* periodic schedule status */
#define STS_RCL BIT(13) /* reclamation */
#define STS_HCH BIT(12) /* HC halted */
#define STS_ULPII BIT(10) /* ULPI interrupt */
#define STS_SLI BIT(8) /* DC suspend */
#define STS_SRI BIT(7) /* SOF received */
#define STS_URI BIT(6) /* USB reset received */
#define STS_AAI BIT(5) /* interrupt on async advance */
#define STS_SEI BIT(4) /* system error */
#define STS_FRI BIT(3) /* frame list rollover */
#define STS_PCI BIT(2) /* port change detect */
#define STS_UEI BIT(1) /* USB error interrupt */
#define STS_UI BIT(0) /* USB interrupt */
u32 usbintr;
/* bits 31:16, per-port interrupt enable */
#define INTR_PPCE(u) (((u)>>16)&0xffff)
#define INTR_ULPIE BIT(10) /* ULPI enable */
#define INTR_SLE BIT(8) /* DC sleep/suspend enable */
#define INTR_SRE BIT(7) /* SOF received enable */
#define INTR_URE BIT(6) /* USB reset enable */
#define INTR_AAE BIT(5) /* interrupt on async advance enable */
#define INTR_SEE BIT(4) /* system error enable */
#define INTR_FRE BIT(3) /* frame list rollover enable */
#define INTR_PCE BIT(2) /* port change detect enable */
#define INTR_UEE BIT(1) /* USB error interrupt enable */
#define INTR_UE BIT(0) /* USB interrupt enable */
u32 frindex; /* frame index */
#define FRINDEX_MASK (0x3fff << 0)
u32 ctrldssegment; /* not used */
u32 deviceaddr;
#define USBADR_SHIFT 25
#define USBADR(d) \
(((d)>>25)&0x7f) /* bits 31:25, device address */
#define USBADR_MASK (0x7f << 25)
#define USBADRA BIT(24) /* device address advance */
u32 endpointlistaddr;/* endpoint list top memory address */
/* bits 31:11, endpoint list pointer */
#define EPBASE(d) (((d)>>11)&0x1fffff)
#define ENDPOINTLISTADDR_MASK (0x1fffff << 11)
u32 ttctrl; /* H: TT operatin, not used */
/* offset: 0x50 */
u32 burstsize; /* burst size of data movement */
#define TXPBURST(b) \
(((b)>>8)&0xff) /* bits 15:8, TX burst length */
#define RXPBURST(b) \
(((b)>>0)&0xff) /* bits 7:0, RX burst length */
u32 txfilltuning; /* TX tuning */
u32 txttfilltuning; /* H: TX TT tuning */
u32 ic_usb; /* control the IC_USB FS/LS transceiver */
/* offset: 0x60 */
u32 ulpi_viewport; /* indirect access to ULPI PHY */
#define ULPIWU BIT(31) /* ULPI wakeup */
#define ULPIRUN BIT(30) /* ULPI read/write run */
#define ULPIRW BIT(29) /* ULPI read/write control */
#define ULPISS BIT(27) /* ULPI sync state */
#define ULPIPORT(u) \
(((u)>>24)&7) /* bits 26:24, ULPI port number */
#define ULPIADDR(u) \
(((u)>>16)&0xff) /* bits 23:16, ULPI data address */
#define ULPIDATRD(u) \
(((u)>>8)&0xff) /* bits 15:8, ULPI data read */
#define ULPIDATWR(u) \
(((u)>>0)&0xff) /* bits 7:0, ULPI date write */
u8 _reserved6[0x70-0x64];
/* offset: 0x70 */
u32 configflag; /* H: not used */
u32 portsc1; /* port status */
#define DA(p) \
(((p)>>25)&0x7f) /* bits 31:25, device address */
#define PORTS_SSTS (BIT(24) | BIT(23)) /* suspend status */
#define PORTS_WKOC BIT(22) /* wake on over-current enable */
#define PORTS_WKDS BIT(21) /* wake on disconnect enable */
#define PORTS_WKCN BIT(20) /* wake on connect enable */
#define PORTS_PTC(p) (((p)>>16)&0xf) /* bits 19:16, port test control */
#define PORTS_PIC (BIT(15) | BIT(14)) /* port indicator control */
#define PORTS_PO BIT(13) /* port owner */
#define PORTS_PP BIT(12) /* port power */
#define PORTS_LS (BIT(11) | BIT(10)) /* line status */
#define PORTS_SLP BIT(9) /* suspend using L1 */
#define PORTS_PR BIT(8) /* port reset */
#define PORTS_SUSP BIT(7) /* suspend */
#define PORTS_FPR BIT(6) /* force port resume */
#define PORTS_OCC BIT(5) /* over-current change */
#define PORTS_OCA BIT(4) /* over-current active */
#define PORTS_PEC BIT(3) /* port enable/disable change */
#define PORTS_PE BIT(2) /* port enable/disable */
#define PORTS_CSC BIT(1) /* connect status change */
#define PORTS_CCS BIT(0) /* current connect status */
u8 _reserved7[0xb4-0x78];
/* offset: 0xb4 */
u32 devlc; /* control LPM and each USB port behavior */
/* bits 31:29, parallel transceiver select */
#define LPM_PTS(d) (((d)>>29)&7)
#define LPM_STS BIT(28) /* serial transceiver select */
#define LPM_PTW BIT(27) /* parallel transceiver width */
#define LPM_PSPD(d) (((d)>>25)&3) /* bits 26:25, port speed */
#define LPM_PSPD_MASK (BIT(26) | BIT(25))
#define LPM_SPEED_FULL 0
#define LPM_SPEED_LOW 1
#define LPM_SPEED_HIGH 2
#define LPM_SRT BIT(24) /* shorten reset time */
#define LPM_PFSC BIT(23) /* port force full speed connect */
#define LPM_PHCD BIT(22) /* PHY low power suspend clock disable */
#define LPM_STL BIT(16) /* STALL reply to LPM token */
#define LPM_BA(d) \
(((d)>>1)&0x7ff) /* bits 11:1, BmAttributes */
#define LPM_NYT_ACK BIT(0) /* NYET/ACK reply to LPM token */
u8 _reserved8[0xf4-0xb8];
/* offset: 0xf4 */
u32 otgsc; /* On-The-Go status and control */
#define OTGSC_DPIE BIT(30) /* data pulse interrupt enable */
#define OTGSC_MSE BIT(29) /* 1 ms timer interrupt enable */
#define OTGSC_BSEIE BIT(28) /* B session end interrupt enable */
#define OTGSC_BSVIE BIT(27) /* B session valid interrupt enable */
#define OTGSC_ASVIE BIT(26) /* A session valid interrupt enable */
#define OTGSC_AVVIE BIT(25) /* A VBUS valid interrupt enable */
#define OTGSC_IDIE BIT(24) /* USB ID interrupt enable */
#define OTGSC_DPIS BIT(22) /* data pulse interrupt status */
#define OTGSC_MSS BIT(21) /* 1 ms timer interrupt status */
#define OTGSC_BSEIS BIT(20) /* B session end interrupt status */
#define OTGSC_BSVIS BIT(19) /* B session valid interrupt status */
#define OTGSC_ASVIS BIT(18) /* A session valid interrupt status */
#define OTGSC_AVVIS BIT(17) /* A VBUS valid interrupt status */
#define OTGSC_IDIS BIT(16) /* USB ID interrupt status */
#define OTGSC_DPS BIT(14) /* data bus pulsing status */
#define OTGSC_MST BIT(13) /* 1 ms timer toggle */
#define OTGSC_BSE BIT(12) /* B session end */
#define OTGSC_BSV BIT(11) /* B session valid */
#define OTGSC_ASV BIT(10) /* A session valid */
#define OTGSC_AVV BIT(9) /* A VBUS valid */
#define OTGSC_USBID BIT(8) /* USB ID */
#define OTGSC_HABA BIT(7) /* hw assist B-disconnect to A-connect */
#define OTGSC_HADP BIT(6) /* hw assist data pulse */
#define OTGSC_IDPU BIT(5) /* ID pullup */
#define OTGSC_DP BIT(4) /* data pulsing */
#define OTGSC_OT BIT(3) /* OTG termination */
#define OTGSC_HAAR BIT(2) /* hw assist auto reset */
#define OTGSC_VC BIT(1) /* VBUS charge */
#define OTGSC_VD BIT(0) /* VBUS discharge */
u32 usbmode;
#define MODE_VBPS BIT(5) /* R/W VBUS power select */
#define MODE_SDIS BIT(4) /* R/W stream disable mode */
#define MODE_SLOM BIT(3) /* R/W setup lockout mode */
#define MODE_ENSE BIT(2) /* endian select */
#define MODE_CM(u) (((u)>>0)&3) /* bits 1:0, controller mode */
#define MODE_IDLE 0
#define MODE_DEVICE 2
#define MODE_HOST 3
u8 _reserved9[0x100-0xfc];
/* offset: 0x100 */
u32 endptnak;
#define EPTN(e) \
(((e)>>16)&0xffff) /* bits 31:16, TX endpoint NAK */
#define EPRN(e) \
(((e)>>0)&0xffff) /* bits 15:0, RX endpoint NAK */
u32 endptnaken;
#define EPTNE(e) \
(((e)>>16)&0xffff) /* bits 31:16, TX endpoint NAK enable */
#define EPRNE(e) \
(((e)>>0)&0xffff) /* bits 15:0, RX endpoint NAK enable */
u32 endptsetupstat;
#define SETUPSTAT_MASK (0xffff << 0) /* bits 15:0 */
#define EP0SETUPSTAT_MASK 1
u32 endptprime;
/* bits 31:16, prime endpoint transmit buffer */
#define PETB(e) (((e)>>16)&0xffff)
/* bits 15:0, prime endpoint receive buffer */
#define PERB(e) (((e)>>0)&0xffff)
/* offset: 0x110 */
u32 endptflush;
/* bits 31:16, flush endpoint transmit buffer */
#define FETB(e) (((e)>>16)&0xffff)
/* bits 15:0, flush endpoint receive buffer */
#define FERB(e) (((e)>>0)&0xffff)
u32 endptstat;
/* bits 31:16, endpoint transmit buffer ready */
#define ETBR(e) (((e)>>16)&0xffff)
/* bits 15:0, endpoint receive buffer ready */
#define ERBR(e) (((e)>>0)&0xffff)
u32 endptcomplete;
/* bits 31:16, endpoint transmit complete event */
#define ETCE(e) (((e)>>16)&0xffff)
/* bits 15:0, endpoint receive complete event */
#define ERCE(e) (((e)>>0)&0xffff)
/* offset: 0x11c */
u32 endptctrl[16];
#define EPCTRL_TXE BIT(23) /* TX endpoint enable */
#define EPCTRL_TXR BIT(22) /* TX data toggle reset */
#define EPCTRL_TXI BIT(21) /* TX data toggle inhibit */
#define EPCTRL_TXT(e) (((e)>>18)&3) /* bits 19:18, TX endpoint type */
#define EPCTRL_TXT_SHIFT 18
#define EPCTRL_TXD BIT(17) /* TX endpoint data source */
#define EPCTRL_TXS BIT(16) /* TX endpoint STALL */
#define EPCTRL_RXE BIT(7) /* RX endpoint enable */
#define EPCTRL_RXR BIT(6) /* RX data toggle reset */
#define EPCTRL_RXI BIT(5) /* RX data toggle inhibit */
#define EPCTRL_RXT(e) (((e)>>2)&3) /* bits 3:2, RX endpoint type */
#define EPCTRL_RXT_SHIFT 2 /* bits 19:18, TX endpoint type */
#define EPCTRL_RXD BIT(1) /* RX endpoint data sink */
#define EPCTRL_RXS BIT(0) /* RX endpoint STALL */
} __attribute__ ((packed));
#endif /* __LANGWELL_UDC_H */