satip-axe/kernel/arch/sh/boards/mach-hms1/setup.c

125 lines
2.9 KiB
C
Raw Normal View History

/*
* arch/sh/boards/st/hms1/setup.c
*
* Copyright (C) 2006 STMicroelectronics Limited
* Author: Stuart Menefy (stuart.menefy@st.com)
*
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*
* HMS1 board support.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/lirc.h>
#include <linux/smsc911x.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/physmap.h>
#include <linux/stm/platform.h>
#include <linux/stm/stx7100.h>
#include <asm/irl.h>
#define HMS1_PIO_FLASH_VPP stm_gpio(2, 5)
void __init hms1_setup(char** cmdline_p)
{
printk("HMS1 board initialisation\n");
stx7100_early_device_init();
stx7100_configure_asc(2, &(struct stx7100_asc_config) {
.hw_flow_control = 0,
.is_console = 1, });
stx7100_configure_asc(3, &(struct stx7100_asc_config) {
.hw_flow_control = 0,
.is_console = 0, });
}
static void hms1_set_vpp(struct map_info *info, int enable)
{
gpio_set_value(HMS1_PIO_FLASH_VPP, enable);
}
static struct platform_device hms1_physmap_flash = {
.name = "physmap-flash",
.id = -1,
.num_resources = 1,
.resource = (struct resource[]) {
STM_PLAT_RESOURCE_MEM(0, 8*1024*1024),
},
.dev.platform_data = &(struct physmap_flash_data) {
.width = 2,
.set_vpp = hms1_set_vpp,
},
};
static struct platform_device hms1_smsc_lan9117 = {
.name = "smsc911x",
.id = -1,
.num_resources = 2,
.resource = (struct resource []) {
{
.flags = IORESOURCE_MEM,
.start = 0x01000000,
.end = 0x010000ff,
},
{
.flags = IORESOURCE_IRQ,
.start = IRL0_IRQ,
.end = IRL0_IRQ,
},
},
.dev.platform_data = &(struct smsc911x_platform_config) {
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
.flags = SMSC911X_USE_32BIT,
},
};
static struct platform_device *hms1_devices[] __initdata = {
&hms1_physmap_flash,
&hms1_smsc_lan9117,
};
static int __init hms1_device_init(void)
{
stx7100_configure_sata();
stx7100_configure_pwm(&(struct stx7100_pwm_config) {
.out0_enabled = 0,
.out1_enabled = 1, });
stx7100_configure_ssc_i2c(0);
stx7100_configure_ssc_i2c(1);
stx7100_configure_ssc_i2c(2);
stx7100_configure_usb();
stx7100_configure_pata(&(struct stx7100_pata_config) {
.emi_bank = 3,
.pc_mode = 1,
.irq = IRL1_IRQ, });
/* HMS1 has no on-board IR receivers/transmitters. Anyway we still
* configure them because receiver can be present on a front-panel
* add-on and transmitter can be plugged to J9 mini-jack connector */
stx7100_configure_lirc(&(struct stx7100_lirc_config) {
.rx_mode = stx7100_lirc_rx_mode_ir,
.tx_enabled = 0,
.tx_od_enabled = 1, });
gpio_request(HMS1_PIO_FLASH_VPP, "Flash VPP");
gpio_direction_output(HMS1_PIO_FLASH_VPP, 0);
return platform_add_devices(hms1_devices, ARRAY_SIZE(hms1_devices));
}
arch_initcall(hms1_device_init);