satip-axe/kernel/arch/sh/include/mach-se/mach/se.h

118 lines
3.3 KiB
C
Raw Normal View History

#ifndef __ASM_SH_HITACHI_SE_H
#define __ASM_SH_HITACHI_SE_H
/*
* linux/include/asm-sh/hitachi_se.h
*
* Copyright (C) 2000 Kazumoto Kojima
*
* Hitachi SolutionEngine support
*/
/* Box specific addresses. */
#define PA_ROM 0x00000000 /* EPROM */
#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */
#define PA_FROM 0x01000000 /* EPROM */
#define PA_FROM_SIZE 0x00400000 /* EPROM size 4M byte */
#define PA_EXT1 0x04000000
#define PA_EXT1_SIZE 0x04000000
#define PA_EXT2 0x08000000
#define PA_EXT2_SIZE 0x04000000
#define PA_SDRAM 0x0c000000
#define PA_SDRAM_SIZE 0x04000000
#define PA_EXT4 0x12000000
#define PA_EXT4_SIZE 0x02000000
#define PA_EXT5 0x14000000
#define PA_EXT5_SIZE 0x04000000
#define PA_PCIC 0x18000000 /* MR-SHPC-01 PCMCIA */
#define PA_83902 0xb0000000 /* DP83902A */
#define PA_83902_IF 0xb0040000 /* DP83902A remote io port */
#define PA_83902_RST 0xb0080000 /* DP83902A reset port */
#define PA_SUPERIO 0xb0400000 /* SMC37C935A super io chip */
#define PA_DIPSW0 0xb0800000 /* Dip switch 5,6 */
#define PA_DIPSW1 0xb0800002 /* Dip switch 7,8 */
#define PA_LED 0xb0c00000 /* LED */
#if defined(CONFIG_CPU_SUBTYPE_SH7705)
#define PA_BCR 0xb0e00000
#else
#define PA_BCR 0xb1400000 /* FPGA */
#endif
#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */
#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */
#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */
#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */
#define MRSHPC_OPTION (PA_MRSHPC + 6)
#define MRSHPC_CSR (PA_MRSHPC + 8)
#define MRSHPC_ISR (PA_MRSHPC + 10)
#define MRSHPC_ICR (PA_MRSHPC + 12)
#define MRSHPC_CPWCR (PA_MRSHPC + 14)
#define MRSHPC_MW0CR1 (PA_MRSHPC + 16)
#define MRSHPC_MW1CR1 (PA_MRSHPC + 18)
#define MRSHPC_IOWCR1 (PA_MRSHPC + 20)
#define MRSHPC_MW0CR2 (PA_MRSHPC + 22)
#define MRSHPC_MW1CR2 (PA_MRSHPC + 24)
#define MRSHPC_IOWCR2 (PA_MRSHPC + 26)
#define MRSHPC_CDCR (PA_MRSHPC + 28)
#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
#define BCR_ILCRA (PA_BCR + 0)
#define BCR_ILCRB (PA_BCR + 2)
#define BCR_ILCRC (PA_BCR + 4)
#define BCR_ILCRD (PA_BCR + 6)
#define BCR_ILCRE (PA_BCR + 8)
#define BCR_ILCRF (PA_BCR + 10)
#define BCR_ILCRG (PA_BCR + 12)
#if defined(CONFIG_CPU_SUBTYPE_SH7709)
#define INTC_IRR0 0xa4000004UL
#define INTC_IRR1 0xa4000006UL
#define INTC_IRR2 0xa4000008UL
#define INTC_ICR0 0xfffffee0UL
#define INTC_ICR1 0xa4000010UL
#define INTC_ICR2 0xa4000012UL
#define INTC_INTER 0xa4000014UL
#define INTC_IPRC 0xa4000016UL
#define INTC_IPRD 0xa4000018UL
#define INTC_IPRE 0xa400001aUL
#define IRQ0_IRQ 32
#define IRQ1_IRQ 33
#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7705)
#define IRQ_STNIC 12
#define IRQ_CFCARD 14
#else
#define IRQ_STNIC 10
#define IRQ_CFCARD 7
#endif
/* SH Ether support (SH7710/SH7712) */
/* Base address */
#define SH_ETH0_BASE 0xA7000000
#define SH_ETH1_BASE 0xA7000400
/* PHY ID */
#if defined(CONFIG_CPU_SUBTYPE_SH7710)
# define PHY_ID 0x00
#elif defined(CONFIG_CPU_SUBTYPE_SH7712)
# define PHY_ID 0x01
#endif
/* Ether IRQ */
#define SH_ETH0_IRQ 80
#define SH_ETH1_IRQ 81
#define SH_TSU_IRQ 82
void init_se_IRQ(void);
#define __IO_PREFIX se
#include <asm/io_generic.h>
#endif /* __ASM_SH_HITACHI_SE_H */