frodovdr/satip-axe
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

README.md sync

Browse Source
This commit is contained in:
Jaroslav Kysela 2018-10-08 17:38:30 +02:00
parent 8f633628b9
commit 495bc2efe4
2 changed files with 47 additions and 36 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

46
README.md
View File

@ -5,47 +5,21 @@ A firmware with minisatip for Inverto IDL-400s/Grundig GSS.BOX/Telestar Digibit
[![paypal](https://www.paypalobjects.com/en_US/i/btn/btn_donateCC_LG.gif)](http://paypal.me/perex)
The firmware contains various versions of [minisatip](https://github.com/catalinii/minisatip)
which is tuned to get the best performance on this hardware.
There is no DLNA server, but there is HTTP and FTP server to server for
example m3u playlists to clients.
Releases:
---------
- download from [github releases](https://github.com/perexg/satip-axe/releases)
- see to [dist](https://github.com/perexg/satip-axe/tree/master/dist) directory - README file
- a TTL USB serial is not required to boot this precompiled firmware
from the USB stick or an installation to the internal flash
A notes for developers (might be outdated):
-------------------------------------------
Developers:
-----------
Requirements:
- git, python
- STLinux 2.4 (all-sh4-glibc) - http://www.stlinux.com - installed to /opt/STM/STLinux-2.4/
- fakeroot package/tools
Compilation:
- just type 'make'
- kernel with rootfs is in kernel/arch/sh/boot/uImage.gz
Booting uImage.gz on Inverto IDL-400S/Grundig GSS.BOX/Telestar Digibit R1 from USB:
- connect TTL USB serial adapter to J3 connector (4 pins at the power supply)
- pin 1 = 3.6V (do not use), pin 2 = GND, pin 3 = RXD (STM CPU), pin 4 = TXD (STM CPU)
- parameters: 115200,8N1
- press 'Enter' when you turn on the box (you have only one second) to get 'idl4k> ' prompt
(it seems that 'Enter' is required also to enable the serial console)
- modify bootargs (optional - for original firmware)
set bootargs=console=ttyAS0,115200
- set debugfw environment variable
set debugfw "debugfw=usb start;usb start;fatload usb 0 0x84000000 uimage.gz;set bootargs console=ttyAS0,115200 bigphysarea=20000;bootm 0x84000000"
- you may type 'save' to store this settings permanently
- to execute the debugfw type 'run debugfw'
- note that the USB stick should be in the first (upper) USB connector
Configuration
- dhcp client, telnetd, dropbear (ssh daemon) and minisatip are active by default
- configuration is stored in /etc/sysconfig/config
- see [debug](https://github.com/perexg/satip-axe/tree/master/debug)

37
debug/README.md Normal file
View File

@ -0,0 +1,37 @@
A notes for developers (might be outdated):
-------------------------------------------
Requirements:
- git, python
- STLinux 2.4 (all-sh4-glibc) - http://www.stlinux.com - installed to /opt/STM/STLinux-2.4/
- fakeroot package/tools
Compilation:
- just type 'make'
- kernel with rootfs is in kernel/arch/sh/boot/uImage.gz
Booting uImage.gz on Inverto IDL-400S/Grundig GSS.BOX/Telestar Digibit R1 from USB:
- connect TTL USB serial adapter to J3 connector (4 pins at the power supply)
- pin 1 = 3.6V (do not use), pin 2 = GND, pin 3 = RXD (STM CPU), pin 4 = TXD (STM CPU)
- parameters: 115200,8N1
- press 'Enter' when you turn on the box (you have only one second) to get 'idl4k> ' prompt
(it seems that 'Enter' is required also to enable the serial console)
- modify bootargs (optional - for original firmware)
set bootargs=console=ttyAS0,115200
- set debugfw environment variable
set debugfw "debugfw=usb start;usb start;fatload usb 0 0x84000000 uimage.gz;set bootargs console=ttyAS0,115200 bigphysarea=20000;bootm 0x84000000"
- you may type 'save' to store this settings permanently
- to execute the debugfw type 'run debugfw'
- note that the USB stick should be in the first (upper) USB connector
Configuration
- dhcp client, telnetd, dropbear (ssh daemon) and minisatip are active by default
- configuration is stored in /etc/sysconfig/config