add more info to README.md
This commit is contained in:
parent
8c760debc6
commit
dc7829405f
23
README.md
23
README.md
@ -5,3 +5,26 @@ Requirements:
|
||||
- git, python
|
||||
- STLinux 2.4 (all-sh4-glibc) - http://www.stlinux.com - installed to /opt/STM/STLinux-2.4/
|
||||
- fakeroot package/tools
|
||||
|
||||
Compilation:
|
||||
|
||||
- just type 'make'
|
||||
- kernel with rootfs is in kernel/arch/sh/boot/uImage.gz
|
||||
|
||||
Booting uImage.gz on Inverto IDL-400s/Grundig GSS.BOX/Inverto IDL-400S from USB:
|
||||
|
||||
- connect TTL USB serial adapter to J3 connector (4 pins at the power supply)
|
||||
- pin 1 = 3.6V (do not use), pin 2 = GND, pin 3 = RXD (STM CPU), pin 4 = TXD (STM CPU)
|
||||
- parameters: 115200,8N1
|
||||
- press 'Enter' when you turn on the box (you have only one second) to get 'idl4k> ' prompt
|
||||
- modify bootargs (optional - for original firmware)
|
||||
|
||||
set bootargs=console=ttyAS0,115200
|
||||
|
||||
- set debugfw environment variable
|
||||
|
||||
set debugfw "debugfw=usb start;usb start;fatload usb 0 0x84000000 uimage.gz;set bootargs console=ttyAS0,115200 bigphysarea=20000 initrd=/sbin/init;bootm 0x84000000"
|
||||
|
||||
- you may type 'save' to store this settings permanently
|
||||
- to execute the debugfw type 'run debugfw'
|
||||
- note that the USB stick should be in the first (upper) USB connector
|
||||
|
Loading…
Reference in New Issue
Block a user