add idl4k kernel firmware version 1.13.0.105

kernel/Documentation/ABI/stable/o2cb

@@ -0,0 +1,10 @@
+What:		/sys/fs/o2cb/ (was /sys/o2cb)
+Date:		Dec 2005
+KernelVersion:	2.6.16
+Contact:	ocfs2-devel@oss.oracle.com
+Description:	Ocfs2-tools looks at 'interface-revision' for versioning
+		information. Each logmask/ file controls a set of debug prints
+		and can be written into with the strings "allow", "deny", or
+		"off". Reading the file returns the current state.
+Users:		ocfs2-tools. It's sufficient to mail proposed changes to
+		ocfs2-devel@oss.oracle.com.

kernel/Documentation/ABI/stable/syscalls

@@ -0,0 +1,10 @@
+What:		The kernel syscall interface
+Description:
+	This interface matches much of the POSIX interface and is based
+	on it and other Unix based interfaces.  It will only be added to
+	over time, and not have things removed from it.
+
+	Note that this interface is different for every architecture
+	that Linux supports.  Please see the architecture-specific
+	documentation for details on the syscall numbers that are to be
+	mapped to each syscall.

kernel/Documentation/ABI/stable/sysfs-class-backlight

@@ -0,0 +1,36 @@
+What:		/sys/class/backlight/<backlight>/bl_power
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Control BACKLIGHT power, values are FB_BLANK_* from fb.h
+		 - FB_BLANK_UNBLANK (0)   : power on.
+		 - FB_BLANK_POWERDOWN (4) : power off
+Users:		HAL
+
+What:		/sys/class/backlight/<backlight>/brightness
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Control the brightness for this <backlight>. Values
+		are between 0 and max_brightness. This file will also
+		show the brightness level stored in the driver, which
+		may not be the actual brightness (see actual_brightness).
+Users:		HAL
+
+What:		/sys/class/backlight/<backlight>/actual_brightness
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Show the actual brightness by querying the hardware.
+Users:		HAL
+
+What:		/sys/class/backlight/<backlight>/max_brightness
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Maximum brightness for <backlight>.
+Users:		HAL

kernel/Documentation/ABI/stable/sysfs-class-ubi

@@ -0,0 +1,212 @@
+What:		/sys/class/ubi/
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		The ubi/ class sub-directory belongs to the UBI subsystem and
+		provides general UBI information, per-UBI device information
+		and per-UBI volume information.
+
+What:		/sys/class/ubi/version
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		This file contains version of the latest supported UBI on-media
+		format. Currently it is 1, and there is no plan to change this.
+		However, if in the future UBI needs on-flash format changes
+		which cannot be done in a compatible manner, a new format
+		version will be added. So this is a mechanism for possible
+		future backward-compatible (but forward-incompatible)
+		improvements.
+
+What:		/sys/class/ubiX/
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		The /sys/class/ubi0, /sys/class/ubi1, etc directories describe
+		UBI devices (UBI device 0, 1, etc). They contain general UBI
+		device information and per UBI volume information (each UBI
+		device may have many UBI volumes)
+
+What:		/sys/class/ubi/ubiX/avail_eraseblocks
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Amount of available logical eraseblock. For example, one may
+		create a new UBI volume which has this amount of logical
+		eraseblocks.
+
+What:		/sys/class/ubi/ubiX/bad_peb_count
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Count of bad physical eraseblocks on the underlying MTD device.
+
+What:		/sys/class/ubi/ubiX/bgt_enabled
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Contains ASCII "0\n" if the UBI background thread is disabled,
+		and ASCII "1\n" if it is enabled.
+
+What:		/sys/class/ubi/ubiX/dev
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Major and minor numbers of the character device corresponding
+		to this UBI device (in <major>:<minor> format).
+
+What:		/sys/class/ubi/ubiX/eraseblock_size
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Maximum logical eraseblock size this UBI device may provide. UBI
+		volumes may have smaller logical eraseblock size because of their
+		alignment.
+
+What:		/sys/class/ubi/ubiX/max_ec
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Maximum physical eraseblock erase counter value.
+
+What:		/sys/class/ubi/ubiX/max_vol_count
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Maximum number of volumes which this UBI device may have.
+
+What:		/sys/class/ubi/ubiX/min_io_size
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Minimum input/output unit size. All the I/O may only be done
+		in fractions of the contained number.
+
+What:		/sys/class/ubi/ubiX/mtd_num
+Date:		January 2008
+KernelVersion:	2.6.25
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Number of the underlying MTD device.
+
+What:		/sys/class/ubi/ubiX/reserved_for_bad
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Number of physical eraseblocks reserved for bad block handling.
+
+What:		/sys/class/ubi/ubiX/total_eraseblocks
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Total number of good (not marked as bad) physical eraseblocks on
+		the underlying MTD device.
+
+What:		/sys/class/ubi/ubiX/volumes_count
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Count of volumes on this UBI device.
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		The /sys/class/ubi/ubiX/ubiX_0/, /sys/class/ubi/ubiX/ubiX_1/,
+		etc directories describe UBI volumes on UBI device X (volumes
+		0, 1, etc).
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/alignment
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Volume alignment - the value the logical eraseblock size of
+		this volume has to be aligned on. For example, 2048 means that
+		logical eraseblock size is multiple of 2048. In other words,
+		volume logical eraseblock size is UBI device logical eraseblock
+		size aligned to the alignment value.
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/corrupted
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Contains ASCII "0\n" if the UBI volume is OK, and ASCII "1\n"
+		if it is corrupted (e.g., due to an interrupted volume update).
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/data_bytes
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		The amount of data this volume contains. This value makes sense
+		only for static volumes, and for dynamic volume it equivalent
+		to the total volume size in bytes.
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/dev
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Major and minor numbers of the character device corresponding
+		to this UBI volume (in <major>:<minor> format).
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/name
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Volume name.
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/reserved_ebs
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Count of physical eraseblock reserved for this volume.
+		Equivalent to the volume size in logical eraseblocks.
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/type
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Volume type. Contains ASCII "dynamic\n" for dynamic volumes and
+		"static\n" for static volumes.
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/upd_marker
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Contains ASCII "0\n" if the update marker is not set for this
+		volume, and "1\n" if it is set. The update marker is set when
+		volume update starts, and cleaned when it ends. So the presence
+		of the update marker indicates that the volume is being updated
+		at the moment of the update was interrupted. The later may be
+		checked using the "corrupted" sysfs file.
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/usable_eb_size
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Logical eraseblock size of this volume. Equivalent to logical
+		eraseblock size of the device aligned on the volume alignment
+		value.

kernel/Documentation/ABI/stable/sysfs-driver-usb-usbtmc

@@ -0,0 +1,62 @@
+What:		/sys/bus/usb/drivers/usbtmc/devices/*/interface_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/devices/*/device_capabilities
+Date:		August 2008
+Contact:	Greg Kroah-Hartman <gregkh@suse.de>
+Description:
+		These files show the various USB TMC capabilities as described
+		by the device itself.  The full description of the bitfields
+		can be found in the USB TMC documents from the USB-IF entitled
+		"Universal Serial Bus Test and Measurement Class Specification
+		(USBTMC) Revision 1.0" section 4.2.1.8.
+
+		The files are read only.
+
+
+What:		/sys/bus/usb/drivers/usbtmc/devices/*/usb488_interface_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/devices/*/usb488_device_capabilities
+Date:		August 2008
+Contact:	Greg Kroah-Hartman <gregkh@suse.de>
+Description:
+		These files show the various USB TMC capabilities as described
+		by the device itself.  The full description of the bitfields
+		can be found in the USB TMC documents from the USB-IF entitled
+		"Universal Serial Bus Test and Measurement Class, Subclass
+		USB488 Specification (USBTMC-USB488) Revision 1.0" section
+		4.2.2.
+
+		The files are read only.
+
+
+What:		/sys/bus/usb/drivers/usbtmc/devices/*/TermChar
+Date:		August 2008
+Contact:	Greg Kroah-Hartman <gregkh@suse.de>
+Description:
+		This file is the TermChar value to be sent to the USB TMC
+		device as described by the document, "Universal Serial Bus Test
+		and Measurement Class Specification
+		(USBTMC) Revision 1.0" as published by the USB-IF.
+
+		Note that the TermCharEnabled file determines if this value is
+		sent to the device or not.
+
+
+What:		/sys/bus/usb/drivers/usbtmc/devices/*/TermCharEnabled
+Date:		August 2008
+Contact:	Greg Kroah-Hartman <gregkh@suse.de>
+Description:
+		This file determines if the TermChar is to be sent to the
+		device on every transaction or not.  For more details about
+		this, please see the document, "Universal Serial Bus Test and
+		Measurement Class Specification (USBTMC) Revision 1.0" as
+		published by the USB-IF.
+
+
+What:		/sys/bus/usb/drivers/usbtmc/devices/*/auto_abort
+Date:		August 2008
+Contact:	Greg Kroah-Hartman <gregkh@suse.de>
+Description:
+		This file determines if the the transaction of the USB TMC
+		device is to be automatically aborted if there is any error.
+		For more details about this, please see the document,
+		"Universal Serial Bus Test and Measurement Class Specification
+		(USBTMC) Revision 1.0" as published by the USB-IF.

kernel/Documentation/ABI/stable/sysfs-module

@@ -0,0 +1,30 @@
+What:		/sys/module
+Description:
+	The /sys/module tree consists of the following structure:
+
+	/sys/module/MODULENAME
+		The name of the module that is in the kernel.  This
+		module name will show up either if the module is built
+		directly into the kernel, or if it is loaded as a
+		dyanmic module.
+
+	/sys/module/MODULENAME/parameters
+		This directory contains individual files that are each
+		individual parameters of the module that are able to be
+		changed at runtime.  See the individual module
+		documentation as to the contents of these parameters and
+		what they accomplish.
+
+		Note: The individual parameter names and values are not
+		considered stable, only the fact that they will be
+		placed in this location within sysfs.  See the
+		individual driver documentation for details as to the
+		stability of the different parameters.
+
+	/sys/module/MODULENAME/refcnt
+		If the module is able to be unloaded from the kernel, this file
+		will contain the current reference count of the module.
+
+		Note: If the module is built into the kernel, or if the
+		CONFIG_MODULE_UNLOAD kernel configuration value is not enabled,
+		this file will not be present.