add idl4k kernel firmware version 1.13.0.105

kernel/arch/arm/mach-ixp23xx/Kconfig

@@ -0,0 +1,25 @@
+if ARCH_IXP23XX
+
+config ARCH_SUPPORTS_BIG_ENDIAN
+	bool
+	default y
+
+menu "Intel IXP23xx Implementation Options"
+
+comment "IXP23xx Platforms"
+
+config MACH_ESPRESSO
+	bool "Support IP Fabrics Double Espresso platform"
+	help
+
+config MACH_IXDP2351
+	bool "Support Intel IXDP2351 platform"
+	help
+
+config MACH_ROADRUNNER
+	bool "Support ADI RoadRunner platform"
+	help
+
+endmenu
+
+endif

kernel/arch/arm/mach-ixp23xx/Makefile

@@ -0,0 +1,11 @@
+#
+# Makefile for the linux kernel.
+#
+obj-y			:= core.o pci.o
+obj-m			:=
+obj-n			:=
+obj-			:=
+
+obj-$(CONFIG_MACH_ESPRESSO)	+= espresso.o
+obj-$(CONFIG_MACH_IXDP2351)	+= ixdp2351.o
+obj-$(CONFIG_MACH_ROADRUNNER)	+= roadrunner.o

kernel/arch/arm/mach-ixp23xx/Makefile.boot

@@ -0,0 +1,2 @@
+   zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100

kernel/arch/arm/mach-ixp23xx/core.c

@@ -0,0 +1,439 @@
+/*
+ * arch/arm/mach-ixp23xx/core.c
+ *
+ * Core routines for IXP23xx chips
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2005 (c) MontaVista Software, Inc.
+ *
+ * Based on 2.4 code Copyright 2004 (c) Intel Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/bitops.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/tlbflush.h>
+#include <asm/pgtable.h>
+
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/arch.h>
+
+
+/*************************************************************************
+ * Chip specific mappings shared by all IXP23xx systems
+ *************************************************************************/
+static struct map_desc ixp23xx_io_desc[] __initdata = {
+	{ /* XSI-CPP CSRs */
+	 	.virtual	= IXP23XX_XSI2CPP_CSR_VIRT,
+	 	.pfn		= __phys_to_pfn(IXP23XX_XSI2CPP_CSR_PHYS),
+	 	.length		= IXP23XX_XSI2CPP_CSR_SIZE,
+		.type		= MT_DEVICE,
+	}, { /* Expansion Bus Config */
+	 	.virtual	= IXP23XX_EXP_CFG_VIRT,
+	 	.pfn		= __phys_to_pfn(IXP23XX_EXP_CFG_PHYS),
+	 	.length		= IXP23XX_EXP_CFG_SIZE,
+		.type		= MT_DEVICE,
+	}, { /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACS,.... */
+	 	.virtual	= IXP23XX_PERIPHERAL_VIRT,
+	 	.pfn		= __phys_to_pfn(IXP23XX_PERIPHERAL_PHYS),
+	 	.length		= IXP23XX_PERIPHERAL_SIZE,
+		.type		= MT_DEVICE,
+	}, { /* CAP CSRs */
+	 	.virtual	= IXP23XX_CAP_CSR_VIRT,
+	 	.pfn		= __phys_to_pfn(IXP23XX_CAP_CSR_PHYS),
+	 	.length		= IXP23XX_CAP_CSR_SIZE,
+		.type		= MT_DEVICE,
+	}, { /* MSF CSRs */
+	 	.virtual	= IXP23XX_MSF_CSR_VIRT,
+	 	.pfn		= __phys_to_pfn(IXP23XX_MSF_CSR_PHYS),
+	 	.length		= IXP23XX_MSF_CSR_SIZE,
+		.type		= MT_DEVICE,
+	}, { /* PCI I/O Space */
+	 	.virtual	= IXP23XX_PCI_IO_VIRT,
+	 	.pfn		= __phys_to_pfn(IXP23XX_PCI_IO_PHYS),
+	 	.length		= IXP23XX_PCI_IO_SIZE,
+		.type		= MT_DEVICE,
+	}, { /* PCI Config Space */
+	 	.virtual	= IXP23XX_PCI_CFG_VIRT,
+	 	.pfn		= __phys_to_pfn(IXP23XX_PCI_CFG_PHYS),
+	 	.length		= IXP23XX_PCI_CFG_SIZE,
+		.type		= MT_DEVICE,
+	}, { /* PCI local CFG CSRs */
+	 	.virtual	= IXP23XX_PCI_CREG_VIRT,
+	 	.pfn		= __phys_to_pfn(IXP23XX_PCI_CREG_PHYS),
+	 	.length		= IXP23XX_PCI_CREG_SIZE,
+		.type		= MT_DEVICE,
+	}, { /* PCI MEM Space */
+	 	.virtual	= IXP23XX_PCI_MEM_VIRT,
+	 	.pfn		= __phys_to_pfn(IXP23XX_PCI_MEM_PHYS),
+	 	.length		= IXP23XX_PCI_MEM_SIZE,
+		.type		= MT_DEVICE,
+	}
+};
+
+void __init ixp23xx_map_io(void)
+{
+	iotable_init(ixp23xx_io_desc, ARRAY_SIZE(ixp23xx_io_desc));
+}
+
+
+/***************************************************************************
+ * IXP23xx Interrupt Handling
+ ***************************************************************************/
+enum ixp23xx_irq_type {
+	IXP23XX_IRQ_LEVEL, IXP23XX_IRQ_EDGE
+};
+
+static void ixp23xx_config_irq(unsigned int, enum ixp23xx_irq_type);
+
+static int ixp23xx_irq_set_type(unsigned int irq, unsigned int type)
+{
+	int line = irq - IRQ_IXP23XX_GPIO6 + 6;
+	u32 int_style;
+	enum ixp23xx_irq_type irq_type;
+	volatile u32 *int_reg;
+
+	/*
+	 * Only GPIOs 6-15 are wired to interrupts on IXP23xx
+	 */
+	if (line < 6 || line > 15)
+		return -EINVAL;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_BOTH:
+		int_style = IXP23XX_GPIO_STYLE_TRANSITIONAL;
+		irq_type = IXP23XX_IRQ_EDGE;
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		int_style = IXP23XX_GPIO_STYLE_RISING_EDGE;
+		irq_type = IXP23XX_IRQ_EDGE;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		int_style = IXP23XX_GPIO_STYLE_FALLING_EDGE;
+		irq_type = IXP23XX_IRQ_EDGE;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		int_style = IXP23XX_GPIO_STYLE_ACTIVE_HIGH;
+		irq_type = IXP23XX_IRQ_LEVEL;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		int_style = IXP23XX_GPIO_STYLE_ACTIVE_LOW;
+		irq_type = IXP23XX_IRQ_LEVEL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ixp23xx_config_irq(irq, irq_type);
+
+	if (line >= 8) {	/* pins 8-15 */
+		line -= 8;
+		int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT2R;
+	} else {		/* pins 0-7 */
+		int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT1R;
+	}
+
+	/*
+	 * Clear pending interrupts
+	 */
+	*IXP23XX_GPIO_GPISR = (1 << line);
+
+	/* Clear the style for the appropriate pin */
+	*int_reg &= ~(IXP23XX_GPIO_STYLE_MASK <<
+			(line * IXP23XX_GPIO_STYLE_SIZE));
+
+	/* Set the new style */
+	*int_reg |= (int_style << (line * IXP23XX_GPIO_STYLE_SIZE));
+
+	return 0;
+}
+
+static void ixp23xx_irq_mask(unsigned int irq)
+{
+	volatile unsigned long *intr_reg;
+
+	if (irq >= 56)
+		irq += 8;
+
+	intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+	*intr_reg &= ~(1 << (irq % 32));
+}
+
+static void ixp23xx_irq_ack(unsigned int irq)
+{
+	int line = irq - IRQ_IXP23XX_GPIO6 + 6;
+
+	if ((line < 6) || (line > 15))
+		return;
+
+	*IXP23XX_GPIO_GPISR = (1 << line);
+}
+
+/*
+ * Level triggered interrupts on GPIO lines can only be cleared when the
+ * interrupt condition disappears.
+ */
+static void ixp23xx_irq_level_unmask(unsigned int irq)
+{
+	volatile unsigned long *intr_reg;
+
+	ixp23xx_irq_ack(irq);
+
+	if (irq >= 56)
+		irq += 8;
+
+	intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+	*intr_reg |= (1 << (irq % 32));
+}
+
+static void ixp23xx_irq_edge_unmask(unsigned int irq)
+{
+	volatile unsigned long *intr_reg;
+
+	if (irq >= 56)
+		irq += 8;
+
+	intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+	*intr_reg |= (1 << (irq % 32));
+}
+
+static struct irq_chip ixp23xx_irq_level_chip = {
+	.ack		= ixp23xx_irq_mask,
+	.mask		= ixp23xx_irq_mask,
+	.unmask		= ixp23xx_irq_level_unmask,
+	.set_type	= ixp23xx_irq_set_type
+};
+
+static struct irq_chip ixp23xx_irq_edge_chip = {
+	.ack		= ixp23xx_irq_ack,
+	.mask		= ixp23xx_irq_mask,
+	.unmask		= ixp23xx_irq_edge_unmask,
+	.set_type	= ixp23xx_irq_set_type
+};
+
+static void ixp23xx_pci_irq_mask(unsigned int irq)
+{
+	*IXP23XX_PCI_XSCALE_INT_ENABLE &= ~(1 << (IRQ_IXP23XX_INTA + 27 - irq));
+}
+
+static void ixp23xx_pci_irq_unmask(unsigned int irq)
+{
+	*IXP23XX_PCI_XSCALE_INT_ENABLE |= (1 << (IRQ_IXP23XX_INTA + 27 - irq));
+}
+
+/*
+ * TODO: Should this just be done at ASM level?
+ */
+static void pci_handler(unsigned int irq, struct irq_desc *desc)
+{
+	u32 pci_interrupt;
+	unsigned int irqno;
+
+	pci_interrupt = *IXP23XX_PCI_XSCALE_INT_STATUS;
+
+	desc->chip->ack(irq);
+
+	/* See which PCI_INTA, or PCI_INTB interrupted */
+	if (pci_interrupt & (1 << 26)) {
+		irqno = IRQ_IXP23XX_INTB;
+	} else if (pci_interrupt & (1 << 27)) {
+		irqno = IRQ_IXP23XX_INTA;
+	} else {
+		BUG();
+	}
+
+	generic_handle_irq(irqno);
+
+	desc->chip->unmask(irq);
+}
+
+static struct irq_chip ixp23xx_pci_irq_chip = {
+	.ack	= ixp23xx_pci_irq_mask,
+	.mask	= ixp23xx_pci_irq_mask,
+	.unmask	= ixp23xx_pci_irq_unmask
+};
+
+static void ixp23xx_config_irq(unsigned int irq, enum ixp23xx_irq_type type)
+{
+	switch (type) {
+	case IXP23XX_IRQ_LEVEL:
+		set_irq_chip(irq, &ixp23xx_irq_level_chip);
+		set_irq_handler(irq, handle_level_irq);
+		break;
+	case IXP23XX_IRQ_EDGE:
+		set_irq_chip(irq, &ixp23xx_irq_edge_chip);
+		set_irq_handler(irq, handle_edge_irq);
+		break;
+	}
+	set_irq_flags(irq, IRQF_VALID);
+}
+
+void __init ixp23xx_init_irq(void)
+{
+	int irq;
+
+	/* Route everything to IRQ */
+	*IXP23XX_INTR_SEL1 = 0x0;
+	*IXP23XX_INTR_SEL2 = 0x0;
+	*IXP23XX_INTR_SEL3 = 0x0;
+	*IXP23XX_INTR_SEL4 = 0x0;
+
+	/* Mask all sources */
+	*IXP23XX_INTR_EN1 = 0x0;
+	*IXP23XX_INTR_EN2 = 0x0;
+	*IXP23XX_INTR_EN3 = 0x0;
+	*IXP23XX_INTR_EN4 = 0x0;
+
+	/*
+	 * Configure all IRQs for level-sensitive operation
+	 */
+	for (irq = 0; irq <= NUM_IXP23XX_RAW_IRQS; irq++) {
+		ixp23xx_config_irq(irq, IXP23XX_IRQ_LEVEL);
+	}
+
+	for (irq = IRQ_IXP23XX_INTA; irq <= IRQ_IXP23XX_INTB; irq++) {
+		set_irq_chip(irq, &ixp23xx_pci_irq_chip);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	set_irq_chained_handler(IRQ_IXP23XX_PCI_INT_RPH, pci_handler);
+}
+
+
+/*************************************************************************
+ * Timer-tick functions for IXP23xx
+ *************************************************************************/
+#define CLOCK_TICKS_PER_USEC	(CLOCK_TICK_RATE / USEC_PER_SEC)
+
+static unsigned long next_jiffy_time;
+
+static unsigned long
+ixp23xx_gettimeoffset(void)
+{
+	unsigned long elapsed;
+
+	elapsed = *IXP23XX_TIMER_CONT - (next_jiffy_time - LATCH);
+
+	return elapsed / CLOCK_TICKS_PER_USEC;
+}
+
+static irqreturn_t
+ixp23xx_timer_interrupt(int irq, void *dev_id)
+{
+	/* Clear Pending Interrupt by writing '1' to it */
+	*IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND;
+	while ((signed long)(*IXP23XX_TIMER_CONT - next_jiffy_time) >= LATCH) {
+		timer_tick();
+		next_jiffy_time += LATCH;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction ixp23xx_timer_irq = {
+	.name		= "IXP23xx Timer Tick",
+	.handler	= ixp23xx_timer_interrupt,
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+};
+
+void __init ixp23xx_init_timer(void)
+{
+	/* Clear Pending Interrupt by writing '1' to it */
+	*IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND;
+
+	/* Setup the Timer counter value */
+	*IXP23XX_TIMER1_RELOAD =
+		(LATCH & ~IXP23XX_TIMER_RELOAD_MASK) | IXP23XX_TIMER_ENABLE;
+
+	*IXP23XX_TIMER_CONT = 0;
+	next_jiffy_time = LATCH;
+
+	/* Connect the interrupt handler and enable the interrupt */
+	setup_irq(IRQ_IXP23XX_TIMER1, &ixp23xx_timer_irq);
+}
+
+struct sys_timer ixp23xx_timer = {
+	.init		= ixp23xx_init_timer,
+	.offset		= ixp23xx_gettimeoffset,
+};
+
+
+/*************************************************************************
+ * IXP23xx Platform Initialization
+ *************************************************************************/
+static struct resource ixp23xx_uart_resources[] = {
+	{
+		.start		= IXP23XX_UART1_PHYS,
+		.end		= IXP23XX_UART1_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM
+	}, {
+		.start		= IXP23XX_UART2_PHYS,
+		.end		= IXP23XX_UART2_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM
+	}
+};
+
+static struct plat_serial8250_port ixp23xx_uart_data[] = {
+	{
+		.mapbase	= IXP23XX_UART1_PHYS,
+		.membase	= (char *)(IXP23XX_UART1_VIRT + 3),
+		.irq		= IRQ_IXP23XX_UART1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP23XX_UART_XTAL,
+	}, {
+		.mapbase	= IXP23XX_UART2_PHYS,
+		.membase	= (char *)(IXP23XX_UART2_VIRT + 3),
+		.irq		= IRQ_IXP23XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP23XX_UART_XTAL,
+	},
+	{ },
+};
+
+static struct platform_device ixp23xx_uart = {
+	.name			= "serial8250",
+	.id			= 0,
+	.dev.platform_data	= ixp23xx_uart_data,
+	.num_resources		= 2,
+	.resource		= ixp23xx_uart_resources,
+};
+
+static struct platform_device *ixp23xx_devices[] __initdata = {
+	&ixp23xx_uart,
+};
+
+void __init ixp23xx_sys_init(void)
+{
+	*IXP23XX_EXP_UNIT_FUSE |= 0xf;
+	platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices));
+}

kernel/arch/arm/mach-ixp23xx/espresso.c

@@ -0,0 +1,95 @@
+/*
+ * arch/arm/mach-ixp23xx/espresso.c
+ *
+ * Double Espresso-specific routines
+ *
+ * Author: Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/bitops.h>
+#include <linux/ioport.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/pci.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/tlbflush.h>
+#include <asm/pgtable.h>
+
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+
+static int __init espresso_pci_init(void)
+{
+	if (machine_is_espresso())
+		ixp23xx_pci_slave_init();
+
+	return 0;
+};
+subsys_initcall(espresso_pci_init);
+
+static struct physmap_flash_data espresso_flash_data = {
+	.width		= 2,
+};
+
+static struct resource espresso_flash_resource = {
+	.start		= 0x90000000,
+	.end		= 0x91ffffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device espresso_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &espresso_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &espresso_flash_resource,
+};
+
+static void __init espresso_init(void)
+{
+	platform_device_register(&espresso_flash);
+
+	/*
+	 * Mark flash as writeable.
+	 */
+	IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE;
+	IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE;
+
+	ixp23xx_sys_init();
+}
+
+MACHINE_START(ESPRESSO, "IP Fabrics Double Espresso")
+	/* Maintainer: Lennert Buytenhek */
+	.phys_io	= IXP23XX_PERIPHERAL_PHYS,
+	.io_pg_offst	= ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc,
+	.map_io		= ixp23xx_map_io,
+	.init_irq	= ixp23xx_init_irq,
+	.timer		= &ixp23xx_timer,
+	.boot_params	= 0x00000100,
+	.init_machine	= espresso_init,
+MACHINE_END

kernel/arch/arm/mach-ixp23xx/include/mach/debug-macro.S

@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <mach/ixp23xx.h>
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1				@ mmu enabled?
+		ldreq	\rx, =IXP23XX_PERIPHERAL_PHYS 	@ physical
+		ldrne	\rx, =IXP23XX_PERIPHERAL_VIRT	@ virtual
+#ifdef __ARMEB__
+		orr	\rx, \rx, #0x00000003
+#endif
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>

kernel/arch/arm/mach-ixp23xx/include/mach/entry-macro.S

@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/entry-macro.S
+ */
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqnr, =(IXP23XX_INTC_VIRT + IXP23XX_INTR_IRQ_ENC_ST_OFFSET)
+		ldr	\irqnr, [\irqnr]	@ get interrupt number
+		cmp	\irqnr, #0x0		@ spurious interrupt ?
+		movne	\irqnr, \irqnr, lsr #2	@ skip unwanted low order bits
+		subne	\irqnr, \irqnr, #1	@ convert to 0 based
+
+#if 0
+		cmp	\irqnr, #IRQ_IXP23XX_PCI_INT_RPH
+		bne	1001f
+		mov	\irqnr, #IRQ_IXP23XX_INTA
+
+		ldr	\irqnr, =0xf5000030
+
+		mov	\tmp, #(1<<26)
+		tst	\irqnr, \tmp
+		movne	\irqnr, #IRQ_IXP23XX_INTB
+
+		mov	\tmp, #(1<<27)
+		tst	\irqnr, \tmp
+		movne	\irqnr, #IRQ_IXP23XX_INTA
+1001:
+#endif
+		.endm

kernel/arch/arm/mach-ixp23xx/include/mach/hardware.h

@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/hardware.h
+ *
+ * Copyright (C) 2002-2004 Intel Corporation.
+ * Copyricht (C) 2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Hardware definitions for IXP23XX based systems
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/* PCI IO info */
+#define PCIO_BASE		IXP23XX_PCI_IO_VIRT
+#define PCIBIOS_MIN_IO		0x00000000
+#define PCIBIOS_MIN_MEM		0xe0000000
+
+#include "ixp23xx.h"
+
+#define pcibios_assign_all_busses()	0
+
+/*
+ * Platform helper functions
+ */
+#include "platform.h"
+
+/*
+ * Platform-specific headers
+ */
+#include "ixdp2351.h"
+
+
+#endif

kernel/arch/arm/mach-ixp23xx/include/mach/io.h

@@ -0,0 +1,52 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/io.h
+ *
+ * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2003-2005 Intel Corp.
+ * Copyright (C) 2005 MontaVista Software, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(p)		((void __iomem*)((p) + IXP23XX_PCI_IO_VIRT))
+#define __mem_pci(a)	(a)
+
+static inline void __iomem *
+ixp23xx_ioremap(unsigned long addr, unsigned long size, unsigned int mtype)
+{
+	if (addr >= IXP23XX_PCI_MEM_START &&
+		addr <= IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE) {
+		if (addr + size > IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE)
+			return NULL;
+
+		return (void __iomem *)
+ 			((addr - IXP23XX_PCI_MEM_START) + IXP23XX_PCI_MEM_VIRT);
+	}
+
+	return __arm_ioremap(addr, size, mtype);
+}
+
+static inline void
+ixp23xx_iounmap(void __iomem *addr)
+{
+	if ((((u32)addr) >= IXP23XX_PCI_MEM_VIRT) &&
+	    (((u32)addr) < IXP23XX_PCI_MEM_VIRT + IXP23XX_PCI_MEM_SIZE))
+		return;
+
+	__iounmap(addr);
+}
+
+#define __arch_ioremap(a,s,f)	ixp23xx_ioremap(a,s,f)
+#define __arch_iounmap(a)	ixp23xx_iounmap(a)
+
+
+#endif

kernel/arch/arm/mach-ixp23xx/include/mach/irqs.h

@@ -0,0 +1,223 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/irqs.h
+ *
+ * IRQ definitions for IXP23XX based systems
+ *
+ * Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ *
+ * Copyright (C) 2003-2004 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#define NR_IXP23XX_IRQS			IRQ_IXP23XX_INTB+1
+#define IRQ_IXP23XX_EXTIRQS		NR_IXP23XX_IRQS
+
+
+#define IRQ_IXP23XX_DBG0		0	/* Debug/Execution/MBox */
+#define IRQ_IXP23XX_DBG1		1	/* Debug/Execution/MBox */
+#define IRQ_IXP23XX_NPE_TRG		2	/* npe_trigger */
+#define IRQ_IXP23XX_TIMER1		3	/* Timer[0] */
+#define IRQ_IXP23XX_TIMER2		4	/* Timer[1] */
+#define IRQ_IXP23XX_TIMESTAMP		5	/* Timer[2], Time-stamp */
+#define IRQ_IXP23XX_WDOG		6	/* Time[3], Watchdog Timer */
+#define IRQ_IXP23XX_PCI_DBELL		7	/* PCI Doorbell */
+#define IRQ_IXP23XX_PCI_DMA1		8	/* PCI DMA Channel 1 */
+#define IRQ_IXP23XX_PCI_DMA2		9	/* PCI DMA Channel 2 */
+#define IRQ_IXP23XX_PCI_DMA3		10	/* PCI DMA Channel 3 */
+#define IRQ_IXP23XX_PCI_INT_RPH		11	/* pcxg_pci_int_rph */
+#define IRQ_IXP23XX_CPP_PMU		12	/* xpxg_pm_int_rpl */
+#define IRQ_IXP23XX_SWINT0		13	/* S/W Interrupt0 */
+#define IRQ_IXP23XX_SWINT1		14	/* S/W Interrupt1 */
+#define IRQ_IXP23XX_UART2		15	/* UART1 Interrupt */
+#define IRQ_IXP23XX_UART1		16	/* UART0 Interrupt */
+#define IRQ_IXP23XX_XSI_PMU_ROLLOVER	17	/* AHB Performance M. Unit counter rollover */
+#define IRQ_IXP23XX_XSI_AHB_PM0		18	/* intr_pm_o */
+#define IRQ_IXP23XX_XSI_AHB_ECE0	19	/* intr_ece_o */
+#define IRQ_IXP23XX_XSI_AHB_GASKET	20	/* gas_intr_o */
+#define IRQ_IXP23XX_XSI_CPP		21	/* xsi2cpp_int */
+#define IRQ_IXP23XX_CPP_XSI		22	/* cpp2xsi_int */
+#define IRQ_IXP23XX_ME_ATTN0		23	/* ME_ATTN */
+#define IRQ_IXP23XX_ME_ATTN1		24	/* ME_ATTN */
+#define IRQ_IXP23XX_ME_ATTN2		25	/* ME_ATTN */
+#define IRQ_IXP23XX_ME_ATTN3		26	/* ME_ATTN */
+#define IRQ_IXP23XX_PCI_ERR_RPH		27	/* PCXG_PCI_ERR_RPH */
+#define IRQ_IXP23XX_D0XG_ECC_CORR	28	/* D0XG_DRAM_ECC_CORR */
+#define IRQ_IXP23XX_D0XG_ECC_UNCORR	29	/* D0XG_DRAM_ECC_UNCORR */
+#define IRQ_IXP23XX_SRAM_ERR1		30	/* SRAM1_ERR */
+#define IRQ_IXP23XX_SRAM_ERR0		31	/* SRAM0_ERR */
+#define IRQ_IXP23XX_MEDIA_ERR		32	/* MEDIA_ERR */
+#define IRQ_IXP23XX_STH_DRAM_ECC_MAJ	33	/* STH_DRAM0_ECC_MAJ */
+#define IRQ_IXP23XX_GPIO6		34	/* GPIO0 interrupts */
+#define IRQ_IXP23XX_GPIO7		35	/* GPIO1 interrupts */
+#define IRQ_IXP23XX_GPIO8		36	/* GPIO2 interrupts */
+#define IRQ_IXP23XX_GPIO9		37	/* GPIO3 interrupts */
+#define IRQ_IXP23XX_GPIO10		38	/* GPIO4 interrupts */
+#define IRQ_IXP23XX_GPIO11		39	/* GPIO5 interrupts */
+#define IRQ_IXP23XX_GPIO12		40	/* GPIO6 interrupts */
+#define IRQ_IXP23XX_GPIO13		41	/* GPIO7 interrupts */
+#define IRQ_IXP23XX_GPIO14		42	/* GPIO8 interrupts */
+#define IRQ_IXP23XX_GPIO15		43	/* GPIO9 interrupts */
+#define IRQ_IXP23XX_SHAC_RING0		44	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING1		45	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING2		46	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING3		47	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING4		48	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING5		49	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING6		50	/* SHAC RING Full */
+#define IRQ_IXP23XX_SHAC_RING7		51	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING8		52	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING9		53	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING10		54	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING11		55	/* SHAC Ring Full */
+#define IRQ_IXP23XX_ME_THREAD_A0_ME0	56	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A1_ME0	57	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A2_ME0	58	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A3_ME0	59	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A4_ME0	60	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A5_ME0	61	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A6_ME0	62	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A7_ME0	63	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A8_ME1	64	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A9_ME1	65	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A10_ME1	66	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A11_ME1	67	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A12_ME1	68	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A13_ME1	69	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A14_ME1	70	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A15_ME1	71	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A16_ME2	72	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A17_ME2	73	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A18_ME2	74	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A19_ME2	75	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A20_ME2	76	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A21_ME2	77	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A22_ME2	78	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A23_ME2	79	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A24_ME3	80	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A25_ME3	81	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A26_ME3	82	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A27_ME3	83	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A28_ME3	84	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A29_ME3	85	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A30_ME3	86	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A31_ME3	87	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_B0_ME0	88	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B1_ME0	89	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B2_ME0	90	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B3_ME0	91	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B4_ME0	92	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B5_ME0	93	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B6_ME0	94	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B7_ME0	95	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B8_ME1	96	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B9_ME1	97	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B10_ME1	98	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B11_ME1	99	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B12_ME1	100	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B13_ME1	101	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B14_ME1	102	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B15_ME1	103	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B16_ME2	104	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B17_ME2	105	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B18_ME2	106	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B19_ME2	107	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B20_ME2	108	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B21_ME2	109	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B22_ME2	110	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B23_ME2	111	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B24_ME3	112	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B25_ME3	113	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B26_ME3	114	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B27_ME3	115	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B28_ME3	116	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B29_ME3	117	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B30_ME3	118	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B31_ME3	119	/* ME_THREAD_B */
+
+#define NUM_IXP23XX_RAW_IRQS		120
+
+#define IRQ_IXP23XX_INTA		120	/* Indirect pcxg_pci_int_rph */
+#define IRQ_IXP23XX_INTB		121	/* Indirect pcxg_pci_int_rph */
+
+#define NR_IXP23XX_IRQ			(IRQ_IXP23XX_INTB + 1)
+
+/*
+ * We default to 32 per-board IRQs. Increase this number if you need
+ * more, but keep it realistic.
+ */
+#define NR_IXP23XX_MACH_IRQS 		32
+
+#define NR_IRQS				(NR_IXP23XX_IRQS + NR_IXP23XX_MACH_IRQS)
+
+#define IXP23XX_MACH_IRQ(irq) 		(NR_IXP23XX_IRQ + (irq))
+
+
+/*
+ * IXDP2351-specific interrupts
+ */
+
+/*
+ * External PCI interrupts signaled through INTB
+ *
+ */
+#define IXDP2351_INTB_IRQ_BASE 		0
+#define IRQ_IXDP2351_INTA_82546		IXP23XX_MACH_IRQ(0)
+#define IRQ_IXDP2351_INTB_82546		IXP23XX_MACH_IRQ(1)
+#define IRQ_IXDP2351_SPCI_DB_0		IXP23XX_MACH_IRQ(2)
+#define IRQ_IXDP2351_SPCI_DB_1		IXP23XX_MACH_IRQ(3)
+#define IRQ_IXDP2351_SPCI_PMC_INTA	IXP23XX_MACH_IRQ(4)
+#define IRQ_IXDP2351_SPCI_PMC_INTB	IXP23XX_MACH_IRQ(5)
+#define IRQ_IXDP2351_SPCI_PMC_INTC	IXP23XX_MACH_IRQ(6)
+#define IRQ_IXDP2351_SPCI_PMC_INTD	IXP23XX_MACH_IRQ(7)
+#define IRQ_IXDP2351_SPCI_FIC		IXP23XX_MACH_IRQ(8)
+
+#define IXDP2351_INTB_IRQ_BIT(irq)	(irq - IXP23XX_MACH_IRQ(0))
+#define IXDP2351_INTB_IRQ_MASK(irq)	(1 << IXDP2351_INTB_IRQ_BIT(irq))
+#define IXDP2351_INTB_IRQ_VALID		0x01FF
+#define IXDP2351_INTB_IRQ_NUM 		16
+
+/*
+ * Other external interrupts signaled through INTA
+ */
+#define IXDP2351_INTA_IRQ_BASE 		16
+#define IRQ_IXDP2351_IPMI_FROM		IXP23XX_MACH_IRQ(16)
+#define IRQ_IXDP2351_125US		IXP23XX_MACH_IRQ(17)
+#define IRQ_IXDP2351_DB_0_ADD		IXP23XX_MACH_IRQ(18)
+#define IRQ_IXDP2351_DB_1_ADD		IXP23XX_MACH_IRQ(19)
+#define IRQ_IXDP2351_DEBUG1		IXP23XX_MACH_IRQ(20)
+#define IRQ_IXDP2351_ADD_UART		IXP23XX_MACH_IRQ(21)
+#define IRQ_IXDP2351_FIC_ADD		IXP23XX_MACH_IRQ(24)
+#define IRQ_IXDP2351_CS8900		IXP23XX_MACH_IRQ(25)
+#define IRQ_IXDP2351_BBSRAM		IXP23XX_MACH_IRQ(26)
+#define IRQ_IXDP2351_CONFIG_MEDIA	IXP23XX_MACH_IRQ(27)
+#define IRQ_IXDP2351_CLOCK_REF		IXP23XX_MACH_IRQ(28)
+#define IRQ_IXDP2351_A10_NP		IXP23XX_MACH_IRQ(29)
+#define IRQ_IXDP2351_A11_NP		IXP23XX_MACH_IRQ(30)
+#define IRQ_IXDP2351_DEBUG_NP		IXP23XX_MACH_IRQ(31)
+
+#define IXDP2351_INTA_IRQ_BIT(irq) 	(irq - IXP23XX_MACH_IRQ(16))
+#define IXDP2351_INTA_IRQ_MASK(irq) 	(1 << IXDP2351_INTA_IRQ_BIT(irq))
+#define IXDP2351_INTA_IRQ_VALID 	0xFF3F
+#define IXDP2351_INTA_IRQ_NUM 		16
+
+
+/*
+ * ADI RoadRunner IRQs
+ */
+#define IRQ_ROADRUNNER_PCI_INTA 	IRQ_IXP23XX_INTA
+#define IRQ_ROADRUNNER_PCI_INTB 	IRQ_IXP23XX_INTB
+#define IRQ_ROADRUNNER_PCI_INTC 	IRQ_IXP23XX_GPIO11
+#define IRQ_ROADRUNNER_PCI_INTD 	IRQ_IXP23XX_GPIO12
+
+/*
+ * Put new board definitions here
+ */
+
+
+#endif

kernel/arch/arm/mach-ixp23xx/include/mach/ixdp2351.h

@@ -0,0 +1,89 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/ixdp2351.h
+ *
+ * Register and other defines for IXDP2351
+ *
+ * Copyright (c) 2002-2004 Intel Corp.
+ * Copytight (c) 2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_ARCH_IXDP2351_H
+#define __ASM_ARCH_IXDP2351_H
+
+/*
+ * NP module memory map
+ */
+#define IXDP2351_NP_PHYS_BASE		(IXP23XX_EXP_BUS_CS4_BASE)
+#define IXDP2351_NP_PHYS_SIZE		0x00100000
+#define IXDP2351_NP_VIRT_BASE		0xeff00000
+
+#define IXDP2351_VIRT_CS8900_BASE	(IXDP2351_NP_VIRT_BASE)
+#define IXDP2351_VIRT_CS8900_END	(IXDP2351_VIRT_CS8900_BASE + 16)
+
+#define IXDP2351_VIRT_NP_CPLD_BASE 	(IXP23XX_EXP_BUS_CS4_BASE_VIRT + 0x00010000)
+
+#define IXDP2351_NP_CPLD_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_NP_CPLD_BASE + reg))
+
+#define IXDP2351_NP_CPLD_RESET1_REG	IXDP2351_NP_CPLD_REG(0x00)
+#define IXDP2351_NP_CPLD_LED_REG	IXDP2351_NP_CPLD_REG(0x02)
+#define IXDP2351_NP_CPLD_VERSION_REG	IXDP2351_NP_CPLD_REG(0x04)
+
+/*
+ * Base board module memory map
+ */
+
+#define IXDP2351_BB_BASE_PHYS		(IXP23XX_EXP_BUS_CS5_BASE)
+#define IXDP2351_BB_SIZE		0x01000000
+#define IXDP2351_BB_BASE_VIRT		(0xee000000)
+
+#define IXDP2351_BB_AREA_BASE(offset)	(IXDP2351_BB_BASE_VIRT + offset)
+
+#define IXDP2351_VIRT_NVRAM_BASE	IXDP2351_BB_AREA_BASE(0x0)
+#define IXDP2351_NVRAM_SIZE		(0x20000)
+
+#define IXDP2351_VIRT_MB_IXF1104_BASE	IXDP2351_BB_AREA_BASE(0x00020000)
+#define IXDP2351_VIRT_ADD_UART_BASE	IXDP2351_BB_AREA_BASE(0x000240C0)
+#define IXDP2351_VIRT_FIC_BASE		IXDP2351_BB_AREA_BASE(0x00200000)
+#define IXDP2351_VIRT_DB0_BASE		IXDP2351_BB_AREA_BASE(0x00400000)
+#define IXDP2351_VIRT_DB1_BASE		IXDP2351_BB_AREA_BASE(0x00600000)
+#define IXDP2351_VIRT_CPLD_BASE		IXDP2351_BB_AREA_BASE(0x00024000)
+
+/*
+ * On board CPLD registers
+ */
+#define IXDP2351_CPLD_BB_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_CPLD_BASE + reg))
+
+#define IXDP2351_CPLD_RESET0_REG	IXDP2351_CPLD_BB_REG(0x00)
+#define IXDP2351_CPLD_RESET1_REG	IXDP2351_CPLD_BB_REG(0x04)
+
+#define IXDP2351_CPLD_RESET1_MAGIC 	0x55AA
+#define IXDP2351_CPLD_RESET1_ENABLE 	0x8000
+
+#define IXDP2351_CPLD_FPGA_CONFIG_REG	IXDP2351_CPLD_BB_REG(0x08)
+#define IXDP2351_CPLD_INTB_MASK_SET_REG	IXDP2351_CPLD_BB_REG(0x10)
+#define IXDP2351_CPLD_INTA_MASK_SET_REG	IXDP2351_CPLD_BB_REG(0x14)
+#define IXDP2351_CPLD_INTB_STAT_REG	IXDP2351_CPLD_BB_REG(0x18)
+#define IXDP2351_CPLD_INTA_STAT_REG	IXDP2351_CPLD_BB_REG(0x1C)
+#define IXDP2351_CPLD_INTB_RAW_REG	IXDP2351_CPLD_BB_REG(0x20)	/* read */
+#define IXDP2351_CPLD_INTA_RAW_REG	IXDP2351_CPLD_BB_REG(0x24)	/* read */
+#define IXDP2351_CPLD_INTB_MASK_CLR_REG	IXDP2351_CPLD_INTB_RAW_REG	/* write */
+#define IXDP2351_CPLD_INTA_MASK_CLR_REG	IXDP2351_CPLD_INTA_RAW_REG	/* write */
+#define IXDP2351_CPLD_INTB_SIM_REG	IXDP2351_CPLD_BB_REG(0x28)
+#define IXDP2351_CPLD_INTA_SIM_REG	IXDP2351_CPLD_BB_REG(0x2C)
+	/* Interrupt bits are defined in irqs.h */
+#define IXDP2351_CPLD_BB_GBE0_REG	IXDP2351_CPLD_BB_REG(0x30)
+#define IXDP2351_CPLD_BB_GBE1_REG	IXDP2351_CPLD_BB_REG(0x34)
+
+/* #define IXDP2351_CPLD_BB_MISC_REG	IXDP2351_CPLD_REG(0x1C) */
+/* #define IXDP2351_CPLD_BB_MISC_REV_MASK	0xFF		*/
+/* #define IXDP2351_CPLD_BB_GDXCS0_REG	IXDP2351_CPLD_REG(0x24) */
+/* #define IXDP2351_CPLD_BB_GDXCS1_REG	IXDP2351_CPLD_REG(0x28) */
+/* #define IXDP2351_CPLD_BB_CLOCK_REG	IXDP2351_CPLD_REG(0x04) */
+
+
+#endif

kernel/arch/arm/mach-ixp23xx/include/mach/ixp23xx.h

@@ -0,0 +1,298 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/ixp23xx.h
+ *
+ * Register definitions for IXP23XX
+ *
+ * Copyright (C) 2003-2005 Intel Corporation.
+ * Copyright (C) 2005 MontaVista Software, Inc.
+ *
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IXP23XX_H
+#define __ASM_ARCH_IXP23XX_H
+
+/*
+ * IXP2300 linux memory map:
+ *
+ * virt		phys		size
+ * fffd0000	a0000000	64K		XSI2CPP_CSR
+ * fffc0000	c4000000	4K		EXP_CFG
+ * fff00000	c8000000	64K		PERIPHERAL
+ * fe000000	1c0000000	16M		CAP_CSR
+ * fd000000	1c8000000	16M		MSF_CSR
+ * fb000000			16M		---
+ * fa000000	1d8000000	32M		PCI_IO
+ * f8000000	1da000000	32M		PCI_CFG
+ * f6000000	1de000000	32M		PCI_CREG
+ * f4000000			32M		---
+ * f0000000	1e0000000	64M		PCI_MEM
+ * e[c-f]000000					per-platform mappings
+ */
+
+
+/****************************************************************************
+ * Static mappings.
+ ****************************************************************************/
+#define IXP23XX_XSI2CPP_CSR_PHYS	0xa0000000
+#define IXP23XX_XSI2CPP_CSR_VIRT	0xfffd0000
+#define IXP23XX_XSI2CPP_CSR_SIZE	0x00010000
+
+#define IXP23XX_EXP_CFG_PHYS		0xc4000000
+#define IXP23XX_EXP_CFG_VIRT		0xfffc0000
+#define IXP23XX_EXP_CFG_SIZE		0x00001000
+
+#define IXP23XX_PERIPHERAL_PHYS		0xc8000000
+#define IXP23XX_PERIPHERAL_VIRT		0xfff00000
+#define IXP23XX_PERIPHERAL_SIZE		0x00010000
+
+#define IXP23XX_CAP_CSR_PHYS		0x1c0000000ULL
+#define IXP23XX_CAP_CSR_VIRT		0xfe000000
+#define IXP23XX_CAP_CSR_SIZE		0x01000000
+
+#define IXP23XX_MSF_CSR_PHYS		0x1c8000000ULL
+#define IXP23XX_MSF_CSR_VIRT		0xfd000000
+#define IXP23XX_MSF_CSR_SIZE		0x01000000
+
+#define IXP23XX_PCI_IO_PHYS		0x1d8000000ULL
+#define IXP23XX_PCI_IO_VIRT		0xfa000000
+#define IXP23XX_PCI_IO_SIZE		0x02000000
+
+#define IXP23XX_PCI_CFG_PHYS		0x1da000000ULL
+#define IXP23XX_PCI_CFG_VIRT		0xf8000000
+#define IXP23XX_PCI_CFG_SIZE		0x02000000
+#define IXP23XX_PCI_CFG0_VIRT		IXP23XX_PCI_CFG_VIRT
+#define IXP23XX_PCI_CFG1_VIRT		(IXP23XX_PCI_CFG_VIRT + 0x01000000)
+
+#define IXP23XX_PCI_CREG_PHYS		0x1de000000ULL
+#define IXP23XX_PCI_CREG_VIRT		0xf6000000
+#define IXP23XX_PCI_CREG_SIZE		0x02000000
+#define IXP23XX_PCI_CSR_VIRT		(IXP23XX_PCI_CREG_VIRT + 0x01000000)
+
+#define IXP23XX_PCI_MEM_START		0xe0000000
+#define IXP23XX_PCI_MEM_PHYS		0x1e0000000ULL
+#define IXP23XX_PCI_MEM_VIRT		0xf0000000
+#define IXP23XX_PCI_MEM_SIZE		0x04000000
+
+
+/****************************************************************************
+ * XSI2CPP CSRs.
+ ****************************************************************************/
+#define IXP23XX_XSI2CPP_REG(x)		((volatile unsigned long *)(IXP23XX_XSI2CPP_CSR_VIRT + (x)))
+#define IXP23XX_CPP2XSI_CURR_XFER_REG3	IXP23XX_XSI2CPP_REG(0xf8)
+#define IXP23XX_CPP2XSI_ADDR_31		(1 << 19)
+#define IXP23XX_CPP2XSI_PSH_OFF		(1 << 20)
+#define IXP23XX_CPP2XSI_COH_OFF		(1 << 21)
+
+
+/****************************************************************************
+ * Expansion Bus Config.
+ ****************************************************************************/
+#define IXP23XX_EXP_CFG_REG(x)		((volatile unsigned long *)(IXP23XX_EXP_CFG_VIRT + (x)))
+#define IXP23XX_EXP_CS0			IXP23XX_EXP_CFG_REG(0x00)
+#define IXP23XX_EXP_CS1			IXP23XX_EXP_CFG_REG(0x04)
+#define IXP23XX_EXP_CS2			IXP23XX_EXP_CFG_REG(0x08)
+#define IXP23XX_EXP_CS3			IXP23XX_EXP_CFG_REG(0x0c)
+#define IXP23XX_EXP_CS4			IXP23XX_EXP_CFG_REG(0x10)
+#define IXP23XX_EXP_CS5			IXP23XX_EXP_CFG_REG(0x14)
+#define IXP23XX_EXP_CS6			IXP23XX_EXP_CFG_REG(0x18)
+#define IXP23XX_EXP_CS7			IXP23XX_EXP_CFG_REG(0x1c)
+#define IXP23XX_FLASH_WRITABLE		(0x2)
+#define IXP23XX_FLASH_BUS8		(0x1)
+
+#define IXP23XX_EXP_CFG0		IXP23XX_EXP_CFG_REG(0x20)
+#define IXP23XX_EXP_CFG1		IXP23XX_EXP_CFG_REG(0x24)
+#define IXP23XX_EXP_CFG0_MEM_MAP		(1 << 31)
+#define IXP23XX_EXP_CFG0_XSCALE_SPEED_SEL 	(3 << 22)
+#define IXP23XX_EXP_CFG0_XSCALE_SPEED_EN	(1 << 21)
+#define IXP23XX_EXP_CFG0_CPP_SPEED_SEL		(3 << 19)
+#define IXP23XX_EXP_CFG0_CPP_SPEED_EN		(1 << 18)
+#define IXP23XX_EXP_CFG0_PCI_SWIN		(3 << 16)
+#define IXP23XX_EXP_CFG0_PCI_DWIN		(3 << 14)
+#define IXP23XX_EXP_CFG0_PCI33_MODE		(1 << 13)
+#define IXP23XX_EXP_CFG0_QDR_SPEED_SEL		(1 << 12)
+#define IXP23XX_EXP_CFG0_CPP_DIV_SEL		(1 << 5)
+#define IXP23XX_EXP_CFG0_XSI_NOT_PRES		(1 << 4)
+#define IXP23XX_EXP_CFG0_PROM_BOOT		(1 << 3)
+#define IXP23XX_EXP_CFG0_PCI_ARB		(1 << 2)
+#define IXP23XX_EXP_CFG0_PCI_HOST		(1 << 1)
+#define IXP23XX_EXP_CFG0_FLASH_WIDTH		(1 << 0)
+
+#define IXP23XX_EXP_UNIT_FUSE		IXP23XX_EXP_CFG_REG(0x28)
+#define IXP23XX_EXP_MSF_MUX		IXP23XX_EXP_CFG_REG(0x30)
+#define IXP23XX_EXP_CFG_FUSE		IXP23XX_EXP_CFG_REG(0x34)
+
+#define IXP23XX_EXP_BUS_PHYS		0x90000000
+#define IXP23XX_EXP_BUS_WINDOW_SIZE	0x01000000
+
+#define IXP23XX_EXP_BUS_CS0_BASE	(IXP23XX_EXP_BUS_PHYS + 0x00000000)
+#define IXP23XX_EXP_BUS_CS1_BASE	(IXP23XX_EXP_BUS_PHYS + 0x01000000)
+#define IXP23XX_EXP_BUS_CS2_BASE	(IXP23XX_EXP_BUS_PHYS + 0x02000000)
+#define IXP23XX_EXP_BUS_CS3_BASE	(IXP23XX_EXP_BUS_PHYS + 0x03000000)
+#define IXP23XX_EXP_BUS_CS4_BASE	(IXP23XX_EXP_BUS_PHYS + 0x04000000)
+#define IXP23XX_EXP_BUS_CS5_BASE	(IXP23XX_EXP_BUS_PHYS + 0x05000000)
+#define IXP23XX_EXP_BUS_CS6_BASE	(IXP23XX_EXP_BUS_PHYS + 0x06000000)
+#define IXP23XX_EXP_BUS_CS7_BASE	(IXP23XX_EXP_BUS_PHYS + 0x07000000)
+
+
+/****************************************************************************
+ * Peripherals.
+ ****************************************************************************/
+#define IXP23XX_UART1_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x0000)
+#define IXP23XX_UART2_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x1000)
+#define IXP23XX_PMU_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x2000)
+#define IXP23XX_INTC_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x3000)
+#define IXP23XX_GPIO_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x4000)
+#define IXP23XX_TIMER_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x5000)
+#define IXP23XX_NPE0_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x6000)
+#define IXP23XX_DSR_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x7000)
+#define IXP23XX_NPE1_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x8000)
+#define IXP23XX_ETH0_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x9000)
+#define IXP23XX_ETH1_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0xA000)
+#define IXP23XX_GIG0_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0xB000)
+#define IXP23XX_GIG1_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0xC000)
+#define IXP23XX_DDRS_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0xD000)
+
+#define IXP23XX_UART1_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x0000)
+#define IXP23XX_UART2_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x1000)
+#define IXP23XX_PMU_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x2000)
+#define IXP23XX_INTC_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x3000)
+#define IXP23XX_GPIO_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x4000)
+#define IXP23XX_TIMER_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x5000)
+#define IXP23XX_NPE0_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x6000)
+#define IXP23XX_DSR_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x7000)
+#define IXP23XX_NPE1_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x8000)
+#define IXP23XX_ETH0_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x9000)
+#define IXP23XX_ETH1_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0xA000)
+#define IXP23XX_GIG0_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0xB000)
+#define IXP23XX_GIG1_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0xC000)
+#define IXP23XX_DDRS_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0xD000)
+
+
+/****************************************************************************
+ * Interrupt controller.
+ ****************************************************************************/
+#define IXP23XX_INTC_REG(x)		 ((volatile unsigned long *)(IXP23XX_INTC_VIRT + (x)))
+#define IXP23XX_INTR_ST1		IXP23XX_INTC_REG(0x00)
+#define IXP23XX_INTR_ST2		IXP23XX_INTC_REG(0x04)
+#define IXP23XX_INTR_ST3		IXP23XX_INTC_REG(0x08)
+#define IXP23XX_INTR_ST4		IXP23XX_INTC_REG(0x0c)
+#define IXP23XX_INTR_EN1		IXP23XX_INTC_REG(0x10)
+#define IXP23XX_INTR_EN2		IXP23XX_INTC_REG(0x14)
+#define IXP23XX_INTR_EN3		IXP23XX_INTC_REG(0x18)
+#define IXP23XX_INTR_EN4		IXP23XX_INTC_REG(0x1c)
+#define IXP23XX_INTR_SEL1		IXP23XX_INTC_REG(0x20)
+#define IXP23XX_INTR_SEL2		IXP23XX_INTC_REG(0x24)
+#define IXP23XX_INTR_SEL3		IXP23XX_INTC_REG(0x28)
+#define IXP23XX_INTR_SEL4		IXP23XX_INTC_REG(0x2c)
+#define IXP23XX_INTR_IRQ_ST1		IXP23XX_INTC_REG(0x30)
+#define IXP23XX_INTR_IRQ_ST2		IXP23XX_INTC_REG(0x34)
+#define IXP23XX_INTR_IRQ_ST3		IXP23XX_INTC_REG(0x38)
+#define IXP23XX_INTR_IRQ_ST4		IXP23XX_INTC_REG(0x3c)
+#define IXP23XX_INTR_IRQ_ENC_ST_OFFSET	0x54
+
+
+/****************************************************************************
+ * GPIO.
+ ****************************************************************************/
+#define IXP23XX_GPIO_REG(x)		((volatile unsigned long *)(IXP23XX_GPIO_VIRT + (x)))
+#define IXP23XX_GPIO_GPOUTR		IXP23XX_GPIO_REG(0x00)
+#define IXP23XX_GPIO_GPOER		IXP23XX_GPIO_REG(0x04)
+#define IXP23XX_GPIO_GPINR		IXP23XX_GPIO_REG(0x08)
+#define IXP23XX_GPIO_GPISR		IXP23XX_GPIO_REG(0x0c)
+#define IXP23XX_GPIO_GPIT1R		IXP23XX_GPIO_REG(0x10)
+#define IXP23XX_GPIO_GPIT2R		IXP23XX_GPIO_REG(0x14)
+#define IXP23XX_GPIO_GPCLKR		IXP23XX_GPIO_REG(0x18)
+#define IXP23XX_GPIO_GPDBSELR 		IXP23XX_GPIO_REG(0x1c)
+
+#define IXP23XX_GPIO_STYLE_MASK		0x7
+#define IXP23XX_GPIO_STYLE_ACTIVE_HIGH	0x0
+#define IXP23XX_GPIO_STYLE_ACTIVE_LOW	0x1
+#define IXP23XX_GPIO_STYLE_RISING_EDGE	0x2
+#define IXP23XX_GPIO_STYLE_FALLING_EDGE	0x3
+#define IXP23XX_GPIO_STYLE_TRANSITIONAL	0x4
+
+#define IXP23XX_GPIO_STYLE_SIZE		3
+
+
+/****************************************************************************
+ * Timer.
+ ****************************************************************************/
+#define IXP23XX_TIMER_REG(x)		((volatile unsigned long *)(IXP23XX_TIMER_VIRT + (x)))
+#define IXP23XX_TIMER_CONT		IXP23XX_TIMER_REG(0x00)
+#define IXP23XX_TIMER1_TIMESTAMP	IXP23XX_TIMER_REG(0x04)
+#define IXP23XX_TIMER1_RELOAD		IXP23XX_TIMER_REG(0x08)
+#define IXP23XX_TIMER2_TIMESTAMP	IXP23XX_TIMER_REG(0x0c)
+#define IXP23XX_TIMER2_RELOAD		IXP23XX_TIMER_REG(0x10)
+#define IXP23XX_TIMER_WDOG		IXP23XX_TIMER_REG(0x14)
+#define IXP23XX_TIMER_WDOG_EN		IXP23XX_TIMER_REG(0x18)
+#define IXP23XX_TIMER_WDOG_KEY		IXP23XX_TIMER_REG(0x1c)
+#define IXP23XX_TIMER_WDOG_KEY_MAGIC	0x482e
+#define IXP23XX_TIMER_STATUS		IXP23XX_TIMER_REG(0x20)
+#define IXP23XX_TIMER_SOFT_RESET	IXP23XX_TIMER_REG(0x24)
+#define IXP23XX_TIMER_SOFT_RESET_EN	IXP23XX_TIMER_REG(0x28)
+
+#define IXP23XX_TIMER_ENABLE		(1 << 0)
+#define IXP23XX_TIMER_ONE_SHOT		(1 << 1)
+/* Low order bits of reload value ignored */
+#define IXP23XX_TIMER_RELOAD_MASK	(0x3)
+#define IXP23XX_TIMER_DISABLED		(0x0)
+#define IXP23XX_TIMER1_INT_PEND		(1 << 0)
+#define IXP23XX_TIMER2_INT_PEND		(1 << 1)
+#define IXP23XX_TIMER_STATUS_TS_PEND	(1 << 2)
+#define IXP23XX_TIMER_STATUS_WDOG_PEND	(1 << 3)
+#define IXP23XX_TIMER_STATUS_WARM_RESET	(1 << 4)
+
+
+/****************************************************************************
+ * CAP CSRs.
+ ****************************************************************************/
+#define IXP23XX_GLOBAL_REG(x)		((volatile unsigned long *)(IXP23XX_CAP_CSR_VIRT + 0x4a00 + (x)))
+#define IXP23XX_PRODUCT_ID		IXP23XX_GLOBAL_REG(0x00)
+#define IXP23XX_MISC_CONTROL		IXP23XX_GLOBAL_REG(0x04)
+#define IXP23XX_MSF_CLK_CNTRL		IXP23XX_GLOBAL_REG(0x08)
+#define IXP23XX_RESET0			IXP23XX_GLOBAL_REG(0x0c)
+#define IXP23XX_RESET1			IXP23XX_GLOBAL_REG(0x10)
+#define IXP23XX_STRAP_OPTIONS		IXP23XX_GLOBAL_REG(0x18)
+
+#define IXP23XX_ENABLE_WATCHDOG		(1 << 24)
+#define IXP23XX_SHPC_INIT_COMP		(1 << 21)
+#define IXP23XX_RST_ALL			(1 << 16)
+#define IXP23XX_RESET_PCI		(1 << 2)
+#define IXP23XX_PCI_UNIT_RESET		(1 << 1)
+#define IXP23XX_XSCALE_RESET		(1 << 0)
+
+#define IXP23XX_UENGINE_CSR_VIRT_BASE	(IXP23XX_CAP_CSR_VIRT + 0x18000)
+
+
+/****************************************************************************
+ * PCI CSRs.
+ ****************************************************************************/
+#define IXP23XX_PCI_CREG(x)		((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + (x)))
+#define IXP23XX_PCI_CMDSTAT		IXP23XX_PCI_CREG(0x04)
+#define IXP23XX_PCI_SRAM_BAR		IXP23XX_PCI_CREG(0x14)
+#define IXP23XX_PCI_SDRAM_BAR		IXP23XX_PCI_CREG(0x18)
+
+
+#define IXP23XX_PCI_CSR(x)		((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + 0x01000000 + (x)))
+#define IXP23XX_PCI_OUT_INT_STATUS	IXP23XX_PCI_CSR(0x0030)
+#define IXP23XX_PCI_OUT_INT_MASK	IXP23XX_PCI_CSR(0x0034)
+#define IXP23XX_PCI_SRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x00fc)
+#define IXP23XX_PCI_DRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x0100)
+#define IXP23XX_PCI_CONTROL		IXP23XX_PCI_CSR(0x013c)
+#define IXP23XX_PCI_ADDR_EXT		IXP23XX_PCI_CSR(0x0140)
+#define IXP23XX_PCI_ME_PUSH_STATUS	IXP23XX_PCI_CSR(0x0148)
+#define IXP23XX_PCI_ME_PUSH_EN		IXP23XX_PCI_CSR(0x014c)
+#define IXP23XX_PCI_ERR_STATUS		IXP23XX_PCI_CSR(0x0150)
+#define IXP23XX_PCI_ERROR_STATUS	IXP23XX_PCI_CSR(0x0150)
+#define IXP23XX_PCI_ERR_ENABLE		IXP23XX_PCI_CSR(0x0154)
+#define IXP23XX_PCI_XSCALE_INT_STATUS	IXP23XX_PCI_CSR(0x0158)
+#define IXP23XX_PCI_XSCALE_INT_ENABLE	IXP23XX_PCI_CSR(0x015c)
+#define IXP23XX_PCI_CPP_ADDR_BITS	IXP23XX_PCI_CSR(0x0160)
+
+
+#endif

kernel/arch/arm/mach-ixp23xx/include/mach/memory.h

@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/memory.h
+ *
+ * Copyright (c) 2003-2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <mach/hardware.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET		(0x00000000)
+
+#define __virt_to_bus(v)						\
+	({ unsigned int ret;						\
+	ret = ((__virt_to_phys(v) - 0x00000000) +			\
+	 (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)); 	\
+	ret; })
+
+#define __bus_to_virt(b)						\
+	({ unsigned int data;						\
+	data = *((volatile int *)IXP23XX_PCI_SDRAM_BAR);		\
+	 __phys_to_virt((((b - (data & 0xfffffff0)) + 0x00000000))); })
+
+#define arch_is_coherent()	1
+
+#endif

kernel/arch/arm/mach-ixp23xx/include/mach/platform.h

@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/platform.h
+ *
+ * Various bits of code used by platform-level code.
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2005 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned long ixp2000_reg_read(volatile void *reg)
+{
+	return *((volatile unsigned long *)reg);
+}
+
+static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
+{
+	*((volatile unsigned long *)reg) = val;
+}
+
+static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val)
+{
+	*((volatile unsigned long *)reg) = val;
+}
+
+struct pci_sys_data;
+
+void ixp23xx_map_io(void);
+void ixp23xx_init_irq(void);
+void ixp23xx_sys_init(void);
+int ixp23xx_pci_setup(int, struct pci_sys_data *);
+void ixp23xx_pci_preinit(void);
+struct pci_bus *ixp23xx_pci_scan_bus(int, struct pci_sys_data*);
+void ixp23xx_pci_slave_init(void);
+
+extern struct sys_timer ixp23xx_timer;
+
+#define IXP23XX_UART_XTAL		14745600
+
+#ifndef __ASSEMBLY__
+/*
+ * Is system memory on the XSI or CPP bus?
+ */
+static inline unsigned ixp23xx_cpp_boot(void)
+{
+	return (*IXP23XX_EXP_CFG0 & IXP23XX_EXP_CFG0_XSI_NOT_PRES);
+}
+#endif
+
+
+#endif

kernel/arch/arm/mach-ixp23xx/include/mach/system.h

@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/system.h
+ *
+ * Copyright (C) 2003 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+static inline void arch_idle(void)
+{
+#if 0
+	if (!hlt_counter)
+		cpu_do_idle();
+#endif
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	/* First try machine specific support */
+	if (machine_is_ixdp2351()) {
+		*IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_MAGIC;
+		(void) *IXDP2351_CPLD_RESET1_REG;
+		*IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_ENABLE;
+	}
+
+	/* Use on-chip reset capability */
+	*IXP23XX_RESET0 |= IXP23XX_RST_ALL;
+}

kernel/arch/arm/mach-ixp23xx/include/mach/time.h

@@ -0,0 +1,3 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/time.h
+ */

kernel/arch/arm/mach-ixp23xx/include/mach/timex.h

@@ -0,0 +1,7 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/timex.h
+ *
+ * XScale architecture timex specifications
+ */
+
+#define CLOCK_TICK_RATE 75000000

kernel/arch/arm/mach-ixp23xx/include/mach/uncompress.h

@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/uncompress.h
+ *
+ * Copyright (C) 2002-2004 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/ixp23xx.h>
+#include <linux/serial_reg.h>
+
+#define UART_BASE	((volatile u32 *)IXP23XX_UART1_PHYS)
+
+static inline void putc(char c)
+{
+	int j;
+
+	for (j = 0; j < 0x1000; j++) {
+		if (UART_BASE[UART_LSR] & UART_LSR_THRE)
+			break;
+		barrier();
+	}
+
+	UART_BASE[UART_TX] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+
+#endif

kernel/arch/arm/mach-ixp23xx/include/mach/vmalloc.h

@@ -0,0 +1,10 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/vmalloc.h
+ *
+ * Copyright (c) 2005 MontaVista Software, Inc.
+ *
+ * NPU mappings end at 0xf0000000 and we allocate 64MB for board
+ * specific static I/O.
+ */
+
+#define VMALLOC_END	(0xec000000)

kernel/arch/arm/mach-ixp23xx/ixdp2351.c

@@ -0,0 +1,338 @@
+/*
+ * arch/arm/mach-ixp23xx/ixdp2351.c
+ *
+ * IXDP2351 board-specific routines
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2005 (c) MontaVista Software, Inc.
+ *
+ * Based on 2.4 code Copyright 2004 (c) Intel Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/bitops.h>
+#include <linux/ioport.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/pci.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/system.h>
+#include <asm/tlbflush.h>
+#include <asm/pgtable.h>
+
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+
+/*
+ * IXDP2351 Interrupt Handling
+ */
+static void ixdp2351_inta_mask(unsigned int irq)
+{
+	*IXDP2351_CPLD_INTA_MASK_SET_REG = IXDP2351_INTA_IRQ_MASK(irq);
+}
+
+static void ixdp2351_inta_unmask(unsigned int irq)
+{
+	*IXDP2351_CPLD_INTA_MASK_CLR_REG = IXDP2351_INTA_IRQ_MASK(irq);
+}
+
+static void ixdp2351_inta_handler(unsigned int irq, struct irq_desc *desc)
+{
+	u16 ex_interrupt =
+		*IXDP2351_CPLD_INTA_STAT_REG & IXDP2351_INTA_IRQ_VALID;
+	int i;
+
+	desc->chip->mask(irq);
+
+	for (i = 0; i < IXDP2351_INTA_IRQ_NUM; i++) {
+		if (ex_interrupt & (1 << i)) {
+			int cpld_irq =
+				IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + i);
+			generic_handle_irq(cpld_irq);
+		}
+	}
+
+	desc->chip->unmask(irq);
+}
+
+static struct irq_chip ixdp2351_inta_chip = {
+	.ack	= ixdp2351_inta_mask,
+	.mask	= ixdp2351_inta_mask,
+	.unmask	= ixdp2351_inta_unmask
+};
+
+static void ixdp2351_intb_mask(unsigned int irq)
+{
+	*IXDP2351_CPLD_INTB_MASK_SET_REG = IXDP2351_INTB_IRQ_MASK(irq);
+}
+
+static void ixdp2351_intb_unmask(unsigned int irq)
+{
+	*IXDP2351_CPLD_INTB_MASK_CLR_REG = IXDP2351_INTB_IRQ_MASK(irq);
+}
+
+static void ixdp2351_intb_handler(unsigned int irq, struct irq_desc *desc)
+{
+	u16 ex_interrupt =
+		*IXDP2351_CPLD_INTB_STAT_REG & IXDP2351_INTB_IRQ_VALID;
+	int i;
+
+	desc->chip->ack(irq);
+
+	for (i = 0; i < IXDP2351_INTB_IRQ_NUM; i++) {
+		if (ex_interrupt & (1 << i)) {
+			int cpld_irq =
+				IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + i);
+			generic_handle_irq(cpld_irq);
+		}
+	}
+
+	desc->chip->unmask(irq);
+}
+
+static struct irq_chip ixdp2351_intb_chip = {
+	.ack	= ixdp2351_intb_mask,
+	.mask	= ixdp2351_intb_mask,
+	.unmask	= ixdp2351_intb_unmask
+};
+
+void __init ixdp2351_init_irq(void)
+{
+	int irq;
+
+	/* Mask all interrupts from CPLD, disable simulation */
+	*IXDP2351_CPLD_INTA_MASK_SET_REG = (u16) -1;
+	*IXDP2351_CPLD_INTB_MASK_SET_REG = (u16) -1;
+	*IXDP2351_CPLD_INTA_SIM_REG = 0;
+	*IXDP2351_CPLD_INTB_SIM_REG = 0;
+
+	ixp23xx_init_irq();
+
+	for (irq = IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE);
+	     irq <
+	     IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + IXDP2351_INTA_IRQ_NUM);
+	     irq++) {
+		if (IXDP2351_INTA_IRQ_MASK(irq) & IXDP2351_INTA_IRQ_VALID) {
+			set_irq_flags(irq, IRQF_VALID);
+			set_irq_handler(irq, handle_level_irq);
+			set_irq_chip(irq, &ixdp2351_inta_chip);
+		}
+	}
+
+	for (irq = IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE);
+	     irq <
+	     IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + IXDP2351_INTB_IRQ_NUM);
+	     irq++) {
+		if (IXDP2351_INTB_IRQ_MASK(irq) & IXDP2351_INTB_IRQ_VALID) {
+			set_irq_flags(irq, IRQF_VALID);
+			set_irq_handler(irq, handle_level_irq);
+			set_irq_chip(irq, &ixdp2351_intb_chip);
+		}
+	}
+
+	set_irq_chained_handler(IRQ_IXP23XX_INTA, ixdp2351_inta_handler);
+	set_irq_chained_handler(IRQ_IXP23XX_INTB, ixdp2351_intb_handler);
+}
+
+/*
+ * IXDP2351 PCI
+ */
+
+/*
+ * This board does not do normal PCI IRQ routing, or any
+ * sort of swizzling, so we just need to check where on the
+ * bus the device is and figure out what CPLD pin it is
+ * being routed to.
+ */
+#define DEVPIN(dev, pin) ((pin) | ((dev) << 3))
+
+static int __init ixdp2351_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	u8 bus = dev->bus->number;
+	u32 devpin = DEVPIN(PCI_SLOT(dev->devfn), pin);
+	struct pci_bus *tmp_bus = dev->bus;
+
+	/* Primary bus, no interrupts here */
+	if (!bus)
+		return -1;
+
+	/* Lookup first leaf in bus tree */
+	while ((tmp_bus->parent != NULL) && (tmp_bus->parent->parent != NULL))
+		tmp_bus = tmp_bus->parent;
+
+	/* Select between known bridges */
+	switch (tmp_bus->self->devfn | (tmp_bus->self->bus->number << 8)) {
+		/* Device is located after first bridge */
+	case 0x0008:
+		if (tmp_bus == dev->bus) {
+			/* Device is located directy after first bridge */
+			switch (devpin) {
+				/* Onboard 82546 */
+			case DEVPIN(1, 1):	/* Onboard 82546 ch 0 */
+				return IRQ_IXDP2351_INTA_82546;
+			case DEVPIN(1, 2):	/* Onboard 82546 ch 1 */
+				return IRQ_IXDP2351_INTB_82546;
+				/* PMC SLOT */
+			case DEVPIN(0, 1):	/* PMCP INTA# */
+			case DEVPIN(2, 4):	/* PMCS INTD# */
+				return IRQ_IXDP2351_SPCI_PMC_INTA;
+			case DEVPIN(0, 2):	/* PMCP INTB# */
+			case DEVPIN(2, 1):	/* PMCS INTA# */
+				return IRQ_IXDP2351_SPCI_PMC_INTB;
+			case DEVPIN(0, 3):	/* PMCP INTC# */
+			case DEVPIN(2, 2):	/* PMCS INTB# */
+				return IRQ_IXDP2351_SPCI_PMC_INTC;
+			case DEVPIN(0, 4):	/* PMCP INTD# */
+			case DEVPIN(2, 3):	/* PMCS INTC# */
+				return IRQ_IXDP2351_SPCI_PMC_INTD;
+			}
+		} else {
+			/* Device is located indirectly after first bridge */
+			/* Not supported now */
+			return -1;
+		}
+		break;
+	case 0x0010:
+		if (tmp_bus == dev->bus) {
+			/* Device is located directy after second bridge */
+			/* Secondary bus of second bridge */
+			switch (devpin) {
+			case DEVPIN(0, 1):	/* DB#0 */
+			case DEVPIN(0, 2):
+			case DEVPIN(0, 3):
+			case DEVPIN(0, 4):
+				return IRQ_IXDP2351_SPCI_DB_0;
+			case DEVPIN(1, 1):	/* DB#1 */
+			case DEVPIN(1, 2):
+			case DEVPIN(1, 3):
+			case DEVPIN(1, 4):
+				return IRQ_IXDP2351_SPCI_DB_1;
+			case DEVPIN(2, 1):	/* FIC1 */
+			case DEVPIN(2, 2):
+			case DEVPIN(2, 3):
+			case DEVPIN(2, 4):
+			case DEVPIN(3, 1):	/* FIC2 */
+			case DEVPIN(3, 2):
+			case DEVPIN(3, 3):
+			case DEVPIN(3, 4):
+				return IRQ_IXDP2351_SPCI_FIC;
+			}
+		} else {
+			/* Device is located indirectly after second bridge */
+			/* Not supported now */
+			return -1;
+		}
+		break;
+	}
+
+	return -1;
+}
+
+struct hw_pci ixdp2351_pci __initdata = {
+	.nr_controllers	= 1,
+	.preinit	= ixp23xx_pci_preinit,
+	.setup		= ixp23xx_pci_setup,
+	.scan		= ixp23xx_pci_scan_bus,
+	.map_irq	= ixdp2351_map_irq,
+};
+
+int __init ixdp2351_pci_init(void)
+{
+	if (machine_is_ixdp2351())
+		pci_common_init(&ixdp2351_pci);
+
+	return 0;
+}
+
+subsys_initcall(ixdp2351_pci_init);
+
+/*
+ * IXDP2351 Static Mapped I/O
+ */
+static struct map_desc ixdp2351_io_desc[] __initdata = {
+	{
+		.virtual	= IXDP2351_NP_VIRT_BASE,
+		.pfn		= __phys_to_pfn((u64)IXDP2351_NP_PHYS_BASE),
+		.length		= IXDP2351_NP_PHYS_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IXDP2351_BB_BASE_VIRT,
+		.pfn		= __phys_to_pfn((u64)IXDP2351_BB_BASE_PHYS),
+		.length		= IXDP2351_BB_SIZE,
+		.type		= MT_DEVICE
+	}
+};
+
+static void __init ixdp2351_map_io(void)
+{
+	ixp23xx_map_io();
+	iotable_init(ixdp2351_io_desc, ARRAY_SIZE(ixdp2351_io_desc));
+}
+
+static struct physmap_flash_data ixdp2351_flash_data = {
+	.width		= 1,
+};
+
+static struct resource ixdp2351_flash_resource = {
+	.start		= 0x90000000,
+	.end		= 0x93ffffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device ixdp2351_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &ixdp2351_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &ixdp2351_flash_resource,
+};
+
+static void __init ixdp2351_init(void)
+{
+	platform_device_register(&ixdp2351_flash);
+
+	/*
+	 * Mark flash as writeable
+	 */
+	IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE;
+	IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE;
+	IXP23XX_EXP_CS0[2] |= IXP23XX_FLASH_WRITABLE;
+	IXP23XX_EXP_CS0[3] |= IXP23XX_FLASH_WRITABLE;
+
+	ixp23xx_sys_init();
+}
+
+MACHINE_START(IXDP2351, "Intel IXDP2351 Development Platform")
+	/* Maintainer: MontaVista Software, Inc. */
+	.phys_io	= IXP23XX_PERIPHERAL_PHYS,
+	.io_pg_offst	= ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc,
+	.map_io		= ixdp2351_map_io,
+	.init_irq	= ixdp2351_init_irq,
+	.timer		= &ixp23xx_timer,
+	.boot_params	= 0x00000100,
+	.init_machine	= ixdp2351_init,
+MACHINE_END

kernel/arch/arm/mach-ixp23xx/pci.c

@@ -0,0 +1,289 @@
+/*
+ * arch/arm/mach-ixp23xx/pci.c
+ *
+ * PCI routines for IXP23XX based systems
+ *
+ * Copyright (c) 2005 MontaVista Software, Inc.
+ *
+ * based on original code:
+ *
+ * Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ * Copyright 2002-2005 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/sizes.h>
+#include <asm/system.h>
+#include <asm/mach/pci.h>
+#include <mach/hardware.h>
+
+extern int (*external_fault) (unsigned long, struct pt_regs *);
+
+static volatile int pci_master_aborts = 0;
+
+#ifdef DEBUG
+#define DBG(x...)	printk(x)
+#else
+#define DBG(x...)
+#endif
+
+int clear_master_aborts(void);
+
+static u32
+*ixp23xx_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where)
+{
+	u32 *paddress;
+
+	/*
+	 * Must be dword aligned
+	 */
+	where &= ~3;
+
+	/*
+	 * For top bus, generate type 0, else type 1
+	 */
+	if (!bus_nr) {
+		if (PCI_SLOT(devfn) >= 8)
+			return 0;
+
+		paddress = (u32 *) (IXP23XX_PCI_CFG0_VIRT
+				    | (1 << (PCI_SLOT(devfn) + 16))
+				    | (PCI_FUNC(devfn) << 8) | where);
+	} else {
+		paddress = (u32 *) (IXP23XX_PCI_CFG1_VIRT
+				    | (bus_nr << 16)
+				    | (PCI_SLOT(devfn) << 11)
+				    | (PCI_FUNC(devfn) << 8) | where);
+	}
+
+	return paddress;
+}
+
+/*
+ * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes.
+ * 0 and 3 are not valid indexes...
+ */
+static u32 bytemask[] = {
+	/*0*/	0,
+	/*1*/	0xff,
+	/*2*/	0xffff,
+	/*3*/	0,
+	/*4*/	0xffffffff,
+};
+
+static int ixp23xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
+				int where, int size, u32 *value)
+{
+	u32 n;
+	u32 *addr;
+
+	n = where % 4;
+
+	DBG("In config_read(%d) %d from dev %d:%d:%d\n", size, where,
+		bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
+
+	addr = ixp23xx_pci_config_addr(bus->number, devfn, where);
+	if (!addr)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	pci_master_aborts = 0;
+	*value = (*addr >> (8*n)) & bytemask[size];
+	if (pci_master_aborts) {
+			pci_master_aborts = 0;
+			*value = 0xffffffff;
+			return PCIBIOS_DEVICE_NOT_FOUND;
+		}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+/*
+ * We don't do error checking on the address for writes.
+ * It's assumed that the user checked for the device existing first
+ * by doing a read first.
+ */
+static int ixp23xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
+					int where, int size, u32 value)
+{
+	u32 mask;
+	u32 *addr;
+	u32 temp;
+
+	mask = ~(bytemask[size] << ((where % 0x4) * 8));
+	addr = ixp23xx_pci_config_addr(bus->number, devfn, where);
+	if (!addr)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	temp = (u32) (value) << ((where % 0x4) * 8);
+	*addr = (*addr & mask) | temp;
+
+	clear_master_aborts();
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops ixp23xx_pci_ops = {
+	.read	= ixp23xx_pci_read_config,
+	.write	= ixp23xx_pci_write_config,
+};
+
+struct pci_bus *ixp23xx_pci_scan_bus(int nr, struct pci_sys_data *sysdata)
+{
+	return pci_scan_bus(sysdata->busnr, &ixp23xx_pci_ops, sysdata);
+}
+
+int ixp23xx_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+	volatile unsigned long temp;
+	unsigned long flags;
+
+	pci_master_aborts = 1;
+
+	local_irq_save(flags);
+	temp = *IXP23XX_PCI_CONTROL;
+
+	/*
+	 * master abort and cmd tgt err
+	 */
+	if (temp & ((1 << 8) | (1 << 5)))
+		*IXP23XX_PCI_CONTROL = temp;
+
+	temp = *IXP23XX_PCI_CMDSTAT;
+
+	if (temp & (1 << 29))
+		*IXP23XX_PCI_CMDSTAT = temp;
+	local_irq_restore(flags);
+
+	/*
+	 * If it was an imprecise abort, then we need to correct the
+	 * return address to be _after_ the instruction.
+	 */
+	if (fsr & (1 << 10))
+		regs->ARM_pc += 4;
+
+	return 0;
+}
+
+int clear_master_aborts(void)
+{
+	volatile u32 temp;
+
+	temp = *IXP23XX_PCI_CONTROL;
+
+	/*
+	 * master abort and cmd tgt err
+	 */
+	if (temp & ((1 << 8) | (1 << 5)))
+		*IXP23XX_PCI_CONTROL = temp;
+
+	temp = *IXP23XX_PCI_CMDSTAT;
+
+	if (temp & (1 << 29))
+		*IXP23XX_PCI_CMDSTAT = temp;
+
+	return 0;
+}
+
+static void __init ixp23xx_pci_common_init(void)
+{
+#ifdef __ARMEB__
+	*IXP23XX_PCI_CONTROL |= 0x20000;	/* set I/O swapping */
+#endif
+	/*
+	 * ADDR_31 needs to be clear for PCI memory access to CPP memory
+	 */
+	*IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_ADDR_31;
+	*IXP23XX_CPP2XSI_CURR_XFER_REG3 |= IXP23XX_CPP2XSI_PSH_OFF;
+
+	/*
+	 * Select correct memory for PCI inbound transactions
+	 */
+	if (ixp23xx_cpp_boot()) {
+		*IXP23XX_PCI_CPP_ADDR_BITS &= ~(1 << 1);
+	} else {
+		*IXP23XX_PCI_CPP_ADDR_BITS |= (1 << 1);
+
+		/*
+		 * Enable coherency on A2 silicon.
+		 */
+		if (arch_is_coherent())
+			*IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_COH_OFF;
+	}
+}
+
+void __init ixp23xx_pci_preinit(void)
+{
+	ixp23xx_pci_common_init();
+
+	hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS,
+			"PCI config cycle to non-existent device");
+
+	*IXP23XX_PCI_ADDR_EXT = 0x0000e000;
+}
+
+/*
+ * Prevent PCI layer from seeing the inbound host-bridge resources
+ */
+static void __devinit pci_fixup_ixp23xx(struct pci_dev *dev)
+{
+	int i;
+
+	dev->class &= 0xff;
+	dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
+	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
+		dev->resource[i].start = 0;
+		dev->resource[i].end   = 0;
+		dev->resource[i].flags = 0;
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9002, pci_fixup_ixp23xx);
+
+/*
+ * IXP2300 systems often have large resource requirements, so we just
+ * use our own resource space.
+ */
+static struct resource ixp23xx_pci_mem_space = {
+	.start	= IXP23XX_PCI_MEM_START,
+	.end	= IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE - 1,
+	.flags	= IORESOURCE_MEM,
+	.name	= "PCI Mem Space"
+};
+
+static struct resource ixp23xx_pci_io_space = {
+	.start	= 0x00000100,
+	.end	= 0x01ffffff,
+	.flags	= IORESOURCE_IO,
+	.name	= "PCI I/O Space"
+};
+
+int ixp23xx_pci_setup(int nr, struct pci_sys_data *sys)
+{
+	if (nr >= 1)
+		return 0;
+
+	sys->resource[0] = &ixp23xx_pci_io_space;
+	sys->resource[1] = &ixp23xx_pci_mem_space;
+	sys->resource[2] = NULL;
+
+	return 1;
+}
+
+void __init ixp23xx_pci_slave_init(void)
+{
+	ixp23xx_pci_common_init();
+}

kernel/arch/arm/mach-ixp23xx/roadrunner.c

@@ -0,0 +1,181 @@
+/*
+ * arch/arm/mach-ixp23xx/roadrunner.c
+ *
+ * RoadRunner board-specific routines
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2005 (c) MontaVista Software, Inc.
+ *
+ * Based on 2.4 code Copyright 2005 (c) ADI Engineering Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/bitops.h>
+#include <linux/ioport.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/pci.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/tlbflush.h>
+#include <asm/pgtable.h>
+
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+
+/*
+ * Interrupt mapping
+ */
+#define INTA		IRQ_ROADRUNNER_PCI_INTA
+#define INTB		IRQ_ROADRUNNER_PCI_INTB
+#define INTC		IRQ_ROADRUNNER_PCI_INTC
+#define INTD		IRQ_ROADRUNNER_PCI_INTD
+
+#define INTC_PIN	IXP23XX_GPIO_PIN_11
+#define INTD_PIN	IXP23XX_GPIO_PIN_12
+
+static int __init roadrunner_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
+{
+	static int pci_card_slot_irq[] = {INTB, INTC, INTD, INTA};
+	static int pmc_card_slot_irq[] = {INTA, INTB, INTC, INTD};
+	static int usb_irq[] = {INTB, INTC, INTD, -1};
+	static int mini_pci_1_irq[] = {INTB, INTC, -1, -1};
+	static int mini_pci_2_irq[] = {INTC, INTD, -1, -1};
+
+	switch(dev->bus->number) {
+		case 0:
+			switch(dev->devfn) {
+			case 0x0: // PCI-PCI bridge
+				break;
+			case 0x8: // PCI Card Slot
+				return pci_card_slot_irq[pin - 1];
+			case 0x10: // PMC Slot
+				return pmc_card_slot_irq[pin - 1];
+			case 0x18: // PMC Slot Secondary Agent
+				break;
+			case 0x20: // IXP Processor
+				break;
+			default:
+				return NO_IRQ;
+			}
+			break;
+
+		case 1:
+			switch(dev->devfn) {
+			case 0x0: // IDE Controller
+				return (pin == 1) ? INTC : -1;
+			case 0x8: // USB fun 0
+			case 0x9: // USB fun 1
+			case 0xa: // USB fun 2
+				return usb_irq[pin - 1];
+			case 0x10: // Mini PCI 1
+				return mini_pci_1_irq[pin-1];
+			case 0x18: // Mini PCI 2
+				return mini_pci_2_irq[pin-1];
+			case 0x20: // MEM slot
+				return (pin == 1) ? INTA : -1;
+			default:
+				return NO_IRQ;
+			}
+			break;
+
+		default:
+			return NO_IRQ;
+	}
+
+	return NO_IRQ;
+}
+
+static void __init roadrunner_pci_preinit(void)
+{
+	set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
+
+	ixp23xx_pci_preinit();
+}
+
+static struct hw_pci roadrunner_pci __initdata = {
+	.nr_controllers	= 1,
+	.preinit	= roadrunner_pci_preinit,
+	.setup		= ixp23xx_pci_setup,
+	.scan		= ixp23xx_pci_scan_bus,
+	.map_irq	= roadrunner_map_irq,
+};
+
+static int __init roadrunner_pci_init(void)
+{
+	if (machine_is_roadrunner())
+		pci_common_init(&roadrunner_pci);
+
+	return 0;
+};
+
+subsys_initcall(roadrunner_pci_init);
+
+static struct physmap_flash_data roadrunner_flash_data = {
+	.width		= 2,
+};
+
+static struct resource roadrunner_flash_resource = {
+	.start		= 0x90000000,
+	.end		= 0x93ffffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device roadrunner_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &roadrunner_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &roadrunner_flash_resource,
+};
+
+static void __init roadrunner_init(void)
+{
+	platform_device_register(&roadrunner_flash);
+
+	/*
+	 * Mark flash as writeable
+	 */
+	IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE;
+	IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE;
+	IXP23XX_EXP_CS0[2] |= IXP23XX_FLASH_WRITABLE;
+	IXP23XX_EXP_CS0[3] |= IXP23XX_FLASH_WRITABLE;
+
+	ixp23xx_sys_init();
+}
+
+MACHINE_START(ROADRUNNER, "ADI Engineering RoadRunner Development Platform")
+	/* Maintainer: Deepak Saxena */
+	.phys_io	= IXP23XX_PERIPHERAL_PHYS,
+	.io_pg_offst	= ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc,
+	.map_io		= ixp23xx_map_io,
+	.init_irq	= ixp23xx_init_irq,
+	.timer		= &ixp23xx_timer,
+	.boot_params	= 0x00000100,
+	.init_machine	= roadrunner_init,
+MACHINE_END