add idl4k kernel firmware version 1.13.0.105

kernel/arch/h8300/platform/h8s/Makefile

@@ -0,0 +1,7 @@
+#
+# Makefile for the linux kernel.
+#
+# Reuse any files we can from the H8S
+#
+
+obj-y := ints_h8s.o ptrace_h8s.o

kernel/arch/h8300/platform/h8s/edosk2674/Makefile

@@ -0,0 +1,5 @@
+#
+# Makefile for the linux kernel.
+#
+
+extra-y := crt0_$(MODEL).o

kernel/arch/h8300/platform/h8s/edosk2674/crt0_ram.S

@@ -0,0 +1,130 @@
+/*
+ *  linux/arch/h8300/platform/h8s/edosk2674/crt0_ram.S
+ *
+ *  Yoshinori Sato <ysato@users.sourceforge.jp>
+ *
+ *  Platform depend startup
+ *  Target Archtecture:	EDOSK-2674
+ *  Memory Layout     :	RAM
+ */
+
+#define ASSEMBLY
+
+#include <asm/linkage.h>
+#include <asm/regs267x.h>
+			
+#if !defined(CONFIG_BLKDEV_RESERVE)
+#if defined(CONFIG_GDB_DEBUG)
+#define RAMEND (__ramend - 0xc000)
+#else
+#define RAMEND __ramend
+#endif
+#else
+#define RAMEND CONFIG_BLKDEV_RESERVE_ADDRESS
+#endif
+	
+	.global SYMBOL_NAME(_start)
+	.global SYMBOL_NAME(_command_line)
+	.global SYMBOL_NAME(_platform_gpio_table)
+	.global SYMBOL_NAME(_target_name)
+	
+	.h8300s
+
+	.section .text
+	.file	"crt0_ram.S"
+
+	/* CPU Reset entry */
+SYMBOL_NAME_LABEL(_start)
+	mov.l	#RAMEND,sp
+	ldc	#0x80,ccr
+	ldc	#0x00,exr
+
+	/* Peripheral Setup */
+	bclr	#4,@INTCR:8	/* interrupt mode 2 */
+	bset	#5,@INTCR:8
+	bclr	#0,@IER+1:16
+	bset	#1,@ISCRL+1:16	/* IRQ0 Positive Edge */
+	bclr	#0,@ISCRL+1:16
+
+#if defined(CONFIG_MTD_UCLINUX)
+	/* move romfs image */
+	jsr	@__move_romfs	
+#endif
+	
+	/* .bss clear */
+	mov.l	#__sbss,er5
+	mov.l	er5,er6
+	mov.l	#__ebss,er4
+	sub.l	er5,er4
+	shlr	#2,er4
+	sub.l	er0,er0
+1:	
+	mov.l	er0,@er5
+	adds	#4,er5
+	dec.l	#1,er4
+	bne	1b
+
+	/* copy kernel commandline */
+	mov.l	#COMMAND_START,er5
+	mov.l	#SYMBOL_NAME(command_line),er6
+	mov.w	#512,r4
+	eepmov.w
+
+	/* uClinux kernel start */
+	ldc	#0x90,ccr	/* running kernel */
+	mov.l	#SYMBOL_NAME(init_thread_union),sp
+	add.l	#0x2000,sp
+	jsr	@_start_kernel
+_exit:
+
+	jmp	_exit
+
+	rts
+
+	/* I/O port assign information */
+__platform_gpio_table:	
+	mov.l	#gpio_table,er0
+	rts
+
+gpio_table:
+	;; P1DDR
+	;;      used,ddr
+	.byte	0x00,0x00
+	;; P2DDR
+	.byte	0x00,0x00
+	;; P3DDR
+	.byte	0x3f,0x3a
+	;; dummy
+	.byte	0x00,0x00
+	;; P5DDR
+	.byte	0x00,0x00
+	;; P6DDR
+	.byte	0x00,0x00
+	;; P7DDR
+	.byte	0x00,0x00
+	;; P8DDR
+	.byte	0x00,0x00
+	;; dummy
+	.byte	0x00,0x00
+	;; PADDR
+	.byte	0xff,0xff
+	;; PBDDR
+	.byte	0xff,0x00
+	;; PCDDR
+	.byte	0xff,0x00
+	;; PDDDR
+	.byte	0xff,0x00
+	;; PEDDR
+	.byte	0xff,0x00
+	;; PFDDR
+	.byte	0xff,0xff
+	;; PGDDR
+	.byte	0x0f,0x0f
+	;; PHDDR
+	.byte	0x0f,0x0f
+
+__target_name:	
+	.asciz	"EDOSK-2674"
+	
+	.section .bootvec,"ax"
+	jmp	@SYMBOL_NAME(_start)

kernel/arch/h8300/platform/h8s/edosk2674/crt0_rom.S

@@ -0,0 +1,186 @@
+/*
+ *  linux/arch/h8300/platform/h8s/edosk2674/crt0_rom.S
+ *
+ *  Yoshinori Sato <ysato@users.sourceforge.jp>
+ *
+ *  Platform depend startup
+ *  Target Archtecture:	EDOSK-2674
+ *  Memory Layout     :	ROM
+ */
+
+#define ASSEMBLY
+
+#include <asm/linkage.h>
+#include <asm/regs267x.h>
+		
+	.global SYMBOL_NAME(_start)
+	.global SYMBOL_NAME(_command_line)
+	.global SYMBOL_NAME(_platform_gpio_table)
+	.global SYMBOL_NAME(_target_name)
+	
+	.h8300s
+	.section .text
+	.file	"crt0_rom.S"
+
+	/* CPU Reset entry */
+SYMBOL_NAME_LABEL(_start)
+	mov.l	#__ramend,sp
+	ldc	#0x80,ccr
+	ldc	#0,exr
+	
+	/* Peripheral Setup */
+;BSC/GPIO setup
+	mov.l	#init_regs,er0
+	mov.w	#0xffff,e2
+1:
+	mov.w	@er0+,r2
+	beq	2f
+	mov.w	@er0+,r1
+	mov.b	r1l,@er2
+	bra	1b
+
+2:
+;SDRAM setup
+#define SDRAM_SMR 0x400040
+
+	mov.b	#0,r0l
+	mov.b	r0l,@DRACCR:16
+	mov.w	#0x188,r0
+	mov.w	r0,@REFCR:16
+	mov.w	#0x85b4,r0
+	mov.w	r0,@DRAMCR:16
+	mov.b	#0,r1l
+	mov.b	r1l,@SDRAM_SMR
+	mov.w	#0x84b4,r0
+	mov.w	r0,@DRAMCR:16
+;special thanks to Arizona Cooperative Power
+	
+	/* copy .data */
+	mov.l	#__begin_data,er5
+	mov.l	#__sdata,er6
+	mov.l	#__edata,er4
+	sub.l	er6,er4
+	shlr.l	#2,er4
+1:	
+	mov.l	@er5+,er0
+	mov.l	er0,@er6
+	adds	#4,er6
+	dec.l	#1,er4
+	bne	1b	
+
+	/* .bss clear */
+	mov.l	#__sbss,er5
+	mov.l	#__ebss,er4
+	sub.l	er5,er4
+	shlr.l	#2,er4		
+	sub.l	er0,er0
+1:
+	mov.l	er0,@er5
+	adds	#4,er5
+	dec.l	#1,er4
+	bne	1b
+
+	/* copy kernel commandline */
+	mov.l	#COMMAND_START,er5
+	mov.l	#SYMBOL_NAME(_command_line),er6
+	mov.w	#512,r4
+	eepmov.w
+
+	/* linux kernel start */
+	ldc	#0x90,ccr	/* running kernel */
+	mov.l	#SYMBOL_NAME(init_thread_union),sp
+	add.l	#0x2000,sp
+	jsr	@_start_kernel
+_exit:
+
+	jmp	_exit
+
+	rts
+
+	/* I/O port assign information */
+__platform_gpio_table:	
+	mov.l	#gpio_table,er0
+	rts
+
+#define INIT_REGS_DATA(REGS,DATA) \
+	.word	((REGS) & 0xffff),DATA
+
+init_regs:
+INIT_REGS_DATA(ASTCR,0xff)
+INIT_REGS_DATA(RDNCR,0x00)
+INIT_REGS_DATA(ABWCR,0x80)
+INIT_REGS_DATA(WTCRAH,0x27)
+INIT_REGS_DATA(WTCRAL,0x77)
+INIT_REGS_DATA(WTCRBH,0x71)
+INIT_REGS_DATA(WTCRBL,0x22)
+INIT_REGS_DATA(CSACRH,0x80)
+INIT_REGS_DATA(CSACRL,0x80)
+INIT_REGS_DATA(BROMCRH,0xa0)
+INIT_REGS_DATA(BROMCRL,0xa0)
+INIT_REGS_DATA(P3DDR,0x3a)
+INIT_REGS_DATA(P3ODR,0x06)
+INIT_REGS_DATA(PADDR,0xff)
+INIT_REGS_DATA(PFDDR,0xfe)
+INIT_REGS_DATA(PGDDR,0x0f)
+INIT_REGS_DATA(PHDDR,0x0f)
+INIT_REGS_DATA(PFCR0,0xff)
+INIT_REGS_DATA(PFCR2,0x0d)
+INIT_REGS_DATA(ITSR, 0x00)
+INIT_REGS_DATA(ITSR+1,0x3f)
+INIT_REGS_DATA(INTCR,0x20)
+		
+	.word	0
+
+gpio_table:
+	;; P1DDR
+	.byte	0x00,0x00
+	;; P2DDR
+	.byte	0x00,0x00
+	;; P3DDR
+	.byte	0x00,0x00
+	;; dummy
+	.byte	0x00,0x00
+	;; P5DDR
+	.byte	0x00,0x00
+	;; P6DDR
+	.byte	0x00,0x00
+	;; P7DDR
+	.byte	0x00,0x00
+	;; P8DDR
+	.byte	0x00,0x00
+	;; dummy
+	.byte	0x00,0x00
+	;; PADDR
+	.byte	0x00,0x00
+	;; PBDDR
+	.byte	0x00,0x00
+	;; PCDDR
+	.byte	0x00,0x00
+	;; PDDDR
+	.byte	0x00,0x00
+	;; PEDDR
+	.byte	0x00,0x00
+	;; PFDDR
+	.byte	0x00,0x00
+	;; PGDDR
+	.byte	0x00,0x00
+	;; PHDDR
+	.byte	0x00,0x00
+
+	.section .rodata
+__target_name:	
+	.asciz	"EDOSK-2674"
+	
+	.section .bss
+__command_line:	
+	.space	512
+
+	/* interrupt vector */
+	.section .vectors,"ax"
+	.long	__start
+	.long	__start
+vector	=	2
+	.rept	126
+	.long	_interrupt_redirect_table+vector*4
+vector	=	vector + 1
+	.endr

kernel/arch/h8300/platform/h8s/generic/Makefile

@@ -0,0 +1,5 @@
+#
+# Makefile for the linux kernel.
+#
+
+extra-y =  crt0_$(MODEL).o

kernel/arch/h8300/platform/h8s/generic/crt0_ram.S

@@ -0,0 +1,127 @@
+/*
+ *  linux/arch/h8300/platform/h8s/edosk2674/crt0_ram.S
+ *
+ *  Yoshinori Sato <ysato@users.sourceforge.jp>
+ *
+ *  Platform depend startup
+ *  Target Archtecture:	generic
+ *  Memory Layout     :	RAM
+ */
+
+#define ASSEMBLY
+
+#include <asm/linkage.h>
+#include <asm/regs267x.h>
+			
+#if !defined(CONFIG_BLKDEV_RESERVE)
+#if defined(CONFIG_GDB_DEBUG)
+#define RAMEND (__ramend - 0xc000)
+#else
+#define RAMEND __ramend
+#endif
+#else
+#define RAMEND CONFIG_BLKDEV_RESERVE_ADDRESS
+#endif
+	
+	.global SYMBOL_NAME(_start)
+	.global SYMBOL_NAME(_command_line)
+	.global SYMBOL_NAME(_platform_gpio_table)
+	.global SYMBOL_NAME(_target_name)
+	
+	.h8300s
+
+	.section .text
+	.file	"crt0_ram.S"
+
+	/* CPU Reset entry */
+SYMBOL_NAME_LABEL(_start)
+	mov.l	#RAMEND,sp
+	ldc	#0x80,ccr
+	ldc	#0x00,exr
+
+	/* Peripheral Setup */
+	bclr	#4,@INTCR:8	/* interrupt mode 2 */
+	bset	#5,@INTCR:8
+
+#if defined(CONFIG_MTD_UCLINUX)
+	/* move romfs image */
+	jsr	@__move_romfs	
+#endif
+	
+	/* .bss clear */
+	mov.l	#__sbss,er5
+	mov.l	er5,er6
+	mov.l	#__ebss,er4
+	sub.l	er5,er4
+	shlr	#2,er4
+	sub.l	er0,er0
+1:	
+	mov.l	er0,@er5
+	adds	#4,er5
+	dec.l	#1,er4
+	bne	1b
+
+	/* copy kernel commandline */
+	mov.l	#COMMAND_START,er5
+	mov.l	#SYMBOL_NAME(command_line),er6
+	mov.w	#512,r4
+	eepmov.w
+
+	/* uClinux kernel start */
+	ldc	#0x90,ccr	/* running kernel */
+	mov.l	#SYMBOL_NAME(init_thread_union),sp
+	add.l	#0x2000,sp
+	jsr	@_start_kernel
+_exit:
+
+	jmp	_exit
+
+	rts
+
+	/* I/O port assign information */
+__platform_gpio_table:	
+	mov.l	#gpio_table,er0
+	rts
+
+gpio_table:
+	;; P1DDR
+	;;      used,ddr
+	.byte	0x00,0x00
+	;; P2DDR
+	.byte	0x00,0x00
+	;; P3DDR
+	.byte	0x00,0x00
+	;; dummy
+	.byte	0x00,0x00
+	;; P5DDR
+	.byte	0x00,0x00
+	;; P6DDR
+	.byte	0x00,0x00
+	;; P7DDR
+	.byte	0x00,0x00
+	;; P8DDR
+	.byte	0x00,0x00
+	;; dummy
+	.byte	0x00,0x00
+	;; PADDR
+	.byte	0x00,0x00
+	;; PBDDR
+	.byte	0x00,0x00
+	;; PCDDR
+	.byte	0x00,0x00
+	;; PDDDR
+	.byte	0x00,0x00
+	;; PEDDR
+	.byte	0x00,0x00
+	;; PFDDR
+	.byte	0x00,0x00
+	;; PGDDR
+	.byte	0x00,0x00
+	;; PHDDR
+	.byte	0x00,0x00
+
+__target_name:	
+	.asciz	"generic"
+	
+	.section .bootvec,"ax"
+	jmp	@SYMBOL_NAME(_start)

kernel/arch/h8300/platform/h8s/generic/crt0_rom.S

@@ -0,0 +1,128 @@
+/*
+ *  linux/arch/h8300/platform/h8s/generic/crt0_rom.S
+ *
+ *  Yoshinori Sato <ysato@users.sourceforge.jp>
+ *
+ *  Platform depend startup 
+ *  Target Archtecture:	generic
+ *  Memory Layout     :	ROM
+ */
+
+#define ASSEMBLY
+
+#include <asm/linkage.h>
+#include <asm/regs267x.h>
+	
+	.global SYMBOL_NAME(_start)
+	.global SYMBOL_NAME(_command_line)
+	.global SYMBOL_NAME(_platform_gpio_table)
+	.global SYMBOL_NAME(_target_name)
+	
+	.h8300s
+	.section .text
+	.file	"crt0_rom.S"
+
+	/* CPU Reset entry */
+SYMBOL_NAME_LABEL(_start)
+	mov.l	#__ramend,sp
+	ldc	#0x80,ccr
+	ldc	#0,exr
+	bclr	#4,@INTCR:8
+	bset	#5,@INTCR:8	/* Interrupt mode 2 */
+	
+	/* Peripheral Setup */
+	
+	/* copy .data */
+#if !defined(CONFIG_H8S_SIM)
+	mov.l	#__begin_data,er5
+	mov.l	#__sdata,er6
+	mov.l	#__edata,er4
+	sub.l	er6,er4
+	shlr.l	#2,er4
+1:	
+	mov.l	@er5+,er0
+	mov.l	er0,@er6
+	adds	#4,er6
+	dec.l	#1,er4
+	bne	1b	
+#endif
+
+	/* .bss clear */
+	mov.l	#__sbss,er5
+	mov.l	#__ebss,er4
+	sub.l	er5,er4
+	shlr.l	#2,er4		
+	sub.l	er0,er0
+1:
+	mov.l	er0,@er5
+	adds	#4,er5
+	dec.l	#1,er4
+	bne	1b
+
+	/* linux kernel start */
+	ldc	#0x90,ccr	/* running kernel */
+	mov.l	#SYMBOL_NAME(init_thread_union),sp
+	add.l	#0x2000,sp
+	jsr	@_start_kernel
+_exit:
+
+	jmp	_exit
+
+	rts
+
+	/* I/O port assign information */
+__platform_gpio_table:	
+	mov.l	#gpio_table,er0
+	rts
+
+gpio_table:
+	;; P1DDR
+	.byte	0x00,0x00
+	;; P2DDR
+	.byte	0x00,0x00
+	;; P3DDR
+	.byte	0x00,0x00
+	;; P4DDR
+	.byte	0x00,0x00
+	;; P5DDR
+	.byte	0x00,0x00
+	;; P6DDR
+	.byte	0x00,0x00
+	;; dummy
+	.byte	0x00,0x00
+	;; P8DDR
+	.byte	0x00,0x00
+	;; PADDR
+	.byte	0x00,0x00
+	;; PBDDR
+	.byte	0x00,0x00
+	;; PCDDR
+	.byte	0x00,0x00
+	;; PDDDR
+	.byte	0x00,0x00
+	;; PEDDR
+	.byte	0x00,0x00
+	;; PFDDR
+	.byte	0x00,0x00
+	;; PGDDR
+	.byte	0x00,0x00
+	;; PHDDR
+	.byte	0x00,0x00
+
+	.section .rodata
+__target_name:	
+	.asciz	"generic"
+	
+	.section .bss
+__command_line:	
+	.space	512
+
+	/* interrupt vector */
+	.section .vectors,"ax"
+	.long	__start
+	.long	__start
+vector	=	2
+	.rept	126-1
+	.long	_interrupt_redirect_table+vector*4
+vector	=	vector + 1
+	.endr

kernel/arch/h8300/platform/h8s/irq.c

@@ -0,0 +1,104 @@
+/*
+ * linux/arch/h8300/platform/h8s/ints_h8s.c
+ * Interrupt handling CPU variants
+ *
+ * Yoshinori Sato <ysato@users.sourceforge.jp>
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+
+#include <asm/ptrace.h>
+#include <asm/traps.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/regs267x.h>
+
+/* saved vector list */
+const int __initdata h8300_saved_vectors[]={
+#if defined(CONFIG_GDB_DEBUG)
+	TRACE_VEC,
+	TRAP3_VEC,
+#endif
+	-1
+};
+
+/* trap entry table */
+const H8300_VECTOR __initdata h8300_trap_table[] = {
+	0,0,0,0,0,
+	trace_break,  /* TRACE */
+	0,0,
+	system_call,  /* TRAPA #0 */
+	0,0,0,0,0,0,0
+};
+
+/* IRQ pin assignment */
+struct irq_pins {
+	unsigned char port_no;
+	unsigned char bit_no;
+} __attribute__((aligned(1),packed));
+/* ISTR = 0 */
+static const struct irq_pins irq_assign_table0[16]={
+        {H8300_GPIO_P5,H8300_GPIO_B0},{H8300_GPIO_P5,H8300_GPIO_B1},
+	{H8300_GPIO_P5,H8300_GPIO_B2},{H8300_GPIO_P5,H8300_GPIO_B3},
+	{H8300_GPIO_P5,H8300_GPIO_B4},{H8300_GPIO_P5,H8300_GPIO_B5},
+	{H8300_GPIO_P5,H8300_GPIO_B6},{H8300_GPIO_P5,H8300_GPIO_B7},
+	{H8300_GPIO_P6,H8300_GPIO_B0},{H8300_GPIO_P6,H8300_GPIO_B1},
+	{H8300_GPIO_P6,H8300_GPIO_B2},{H8300_GPIO_P6,H8300_GPIO_B3},
+	{H8300_GPIO_P6,H8300_GPIO_B4},{H8300_GPIO_P6,H8300_GPIO_B5},
+	{H8300_GPIO_PF,H8300_GPIO_B1},{H8300_GPIO_PF,H8300_GPIO_B2},
+};
+/* ISTR = 1 */
+static const struct irq_pins irq_assign_table1[16]={
+	{H8300_GPIO_P8,H8300_GPIO_B0},{H8300_GPIO_P8,H8300_GPIO_B1},
+	{H8300_GPIO_P8,H8300_GPIO_B2},{H8300_GPIO_P8,H8300_GPIO_B3},
+	{H8300_GPIO_P8,H8300_GPIO_B4},{H8300_GPIO_P8,H8300_GPIO_B5},
+	{H8300_GPIO_PH,H8300_GPIO_B2},{H8300_GPIO_PH,H8300_GPIO_B3},
+	{H8300_GPIO_P2,H8300_GPIO_B0},{H8300_GPIO_P2,H8300_GPIO_B1},
+	{H8300_GPIO_P2,H8300_GPIO_B2},{H8300_GPIO_P2,H8300_GPIO_B3},
+	{H8300_GPIO_P2,H8300_GPIO_B4},{H8300_GPIO_P2,H8300_GPIO_B5},
+	{H8300_GPIO_P2,H8300_GPIO_B6},{H8300_GPIO_P2,H8300_GPIO_B7},
+};
+
+/* IRQ to GPIO pin translation */
+#define IRQ_GPIO_MAP(irqbit,irq,port,bit)			  \
+do {								  \
+	if (*(volatile unsigned short *)ITSR & irqbit) {	  \
+		port = irq_assign_table1[irq - EXT_IRQ0].port_no; \
+		bit  = irq_assign_table1[irq - EXT_IRQ0].bit_no;  \
+	} else {						  \
+		port = irq_assign_table0[irq - EXT_IRQ0].port_no; \
+		bit  = irq_assign_table0[irq - EXT_IRQ0].bit_no;  \
+	}							  \
+} while(0)
+
+int h8300_enable_irq_pin(unsigned int irq)
+{
+	if (irq >= EXT_IRQ0 && irq <= EXT_IRQ15) {
+		unsigned short ptn = 1 << (irq - EXT_IRQ0);
+		unsigned int port_no,bit_no;
+		IRQ_GPIO_MAP(ptn, irq, port_no, bit_no);
+		if (H8300_GPIO_RESERVE(port_no, bit_no) == 0)
+			return -EBUSY;                   /* pin already use */
+		H8300_GPIO_DDR(port_no, bit_no, H8300_GPIO_INPUT);
+		*(volatile unsigned short *)ISR &= ~ptn; /* ISR clear */
+	}
+
+	return 0;
+}
+
+void h8300_disable_irq_pin(unsigned int irq)
+{
+	if (irq >= EXT_IRQ0 && irq <= EXT_IRQ15) {
+		/* disable interrupt & release IRQ pin */
+		unsigned short ptn = 1 << (irq - EXT_IRQ0);
+		unsigned short port_no,bit_no;
+		*(volatile unsigned short *)ISR &= ~ptn;
+		*(volatile unsigned short *)IER &= ~ptn;
+		IRQ_GPIO_MAP(ptn, irq, port_no, bit_no);
+		H8300_GPIO_FREE(port_no, bit_no);
+	}
+}

kernel/arch/h8300/platform/h8s/ptrace_h8s.c

@@ -0,0 +1,84 @@
+/*
+ *  linux/arch/h8300/platform/h8s/ptrace_h8s.c
+ *    ptrace cpu depend helper functions
+ *
+ *  Yoshinori Sato <ysato@users.sourceforge.jp>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of
+ * this archive for more details.
+ */
+
+#include <linux/linkage.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <asm/ptrace.h>
+
+#define CCR_MASK  0x6f
+#define EXR_TRACE 0x80
+
+/* Mapping from PT_xxx to the stack offset at which the register is
+   saved.  Notice that usp has no stack-slot and needs to be treated
+   specially (see get_reg/put_reg below). */
+static const int h8300_register_offset[] = {
+	PT_REG(er1), PT_REG(er2), PT_REG(er3), PT_REG(er4),
+	PT_REG(er5), PT_REG(er6), PT_REG(er0), PT_REG(orig_er0),
+	PT_REG(ccr), PT_REG(pc),  0,           PT_REG(exr)
+};
+
+/* read register */
+long h8300_get_reg(struct task_struct *task, int regno)
+{
+	switch (regno) {
+	case PT_USP:
+		return task->thread.usp + sizeof(long)*2 + 2;
+	case PT_CCR:
+	case PT_EXR:
+	    return *(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]);
+	default:
+	    return *(unsigned long *)(task->thread.esp0 + h8300_register_offset[regno]);
+	}
+}
+
+/* write register */
+int h8300_put_reg(struct task_struct *task, int regno, unsigned long data)
+{
+	unsigned short oldccr;
+	switch (regno) {
+	case PT_USP:
+		task->thread.usp = data - sizeof(long)*2 - 2;
+	case PT_CCR:
+		oldccr = *(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]);
+		oldccr &= ~CCR_MASK;
+		data &= CCR_MASK;
+		data |= oldccr;
+		*(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]) = data;
+		break;
+	case PT_EXR:
+		/* exr modify not support */
+		return -EIO;
+	default:
+		*(unsigned long *)(task->thread.esp0 + h8300_register_offset[regno]) = data;
+		break;
+	}
+	return 0;
+}
+
+/* disable singlestep */
+void h8300_disable_trace(struct task_struct *child)
+{
+	*(unsigned short *)(child->thread.esp0 + h8300_register_offset[PT_EXR]) &= ~EXR_TRACE;
+}
+
+/* enable singlestep */
+void h8300_enable_trace(struct task_struct *child)
+{
+	*(unsigned short *)(child->thread.esp0 + h8300_register_offset[PT_EXR]) |= EXR_TRACE;
+}
+
+asmlinkage void trace_trap(unsigned long bp)
+{
+	(void)bp;
+	force_sig(SIGTRAP,current);
+}
+