add idl4k kernel firmware version 1.13.0.105

kernel/arch/sh/boards/mach-rsk/Kconfig

@@ -0,0 +1,18 @@
+if SH_RSK
+
+choice
+	prompt "RSK+ options"
+	default SH_RSK7203
+
+config SH_RSK7201
+	bool "RSK7201"
+	depends on CPU_SUBTYPE_SH7201
+
+config SH_RSK7203
+	bool "RSK7203"
+	select ARCH_REQUIRE_GPIOLIB
+	depends on CPU_SUBTYPE_SH7203
+
+endchoice
+
+endif

kernel/arch/sh/boards/mach-rsk/Makefile

@@ -0,0 +1,2 @@
+obj-y				:= setup.o
+obj-$(CONFIG_SH_RSK7203)	+= devices-rsk7203.o

kernel/arch/sh/boards/mach-rsk/devices-rsk7203.c

@@ -0,0 +1,105 @@
+/*
+ * Renesas Technology Europe RSK+ 7203 Support.
+ *
+ * Copyright (C) 2008 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/smsc911x.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+#include <cpu/sh7203.h>
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT | SMSC911X_SWAP_FIFO,
+};
+
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.start		= 0x24000000,
+		.end		= 0x240000ff,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= 64,
+		.end		= 64,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev		= {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+static struct gpio_led rsk7203_gpio_leds[] = {
+	{
+		.name			= "green",
+		.gpio			= GPIO_PE10,
+		.active_low		= 1,
+	}, {
+		.name			= "orange",
+		.default_trigger	= "nand-disk",
+		.gpio			= GPIO_PE12,
+		.active_low		= 1,
+	}, {
+		.name			= "red:timer",
+		.default_trigger	= "timer",
+		.gpio			= GPIO_PC14,
+		.active_low		= 1,
+	}, {
+		.name			= "red:heartbeat",
+		.default_trigger	= "heartbeat",
+		.gpio			= GPIO_PE11,
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data rsk7203_gpio_leds_info = {
+	.leds		= rsk7203_gpio_leds,
+	.num_leds	= ARRAY_SIZE(rsk7203_gpio_leds),
+};
+
+static struct platform_device led_device = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &rsk7203_gpio_leds_info,
+	},
+};
+
+static struct platform_device *rsk7203_devices[] __initdata = {
+	&smsc911x_device,
+	&led_device,
+};
+
+static int __init rsk7203_devices_setup(void)
+{
+	/* Select pins for SCIF0 */
+	gpio_request(GPIO_FN_TXD0, NULL);
+	gpio_request(GPIO_FN_RXD0, NULL);
+
+	/* Setup LAN9118: CS1 in 16-bit Big Endian Mode, IRQ0 at Port B */
+	ctrl_outl(0x36db0400, 0xfffc0008); /* CS1BCR */
+	gpio_request(GPIO_FN_IRQ0_PB, NULL);
+
+	return platform_add_devices(rsk7203_devices,
+				    ARRAY_SIZE(rsk7203_devices));
+}
+device_initcall(rsk7203_devices_setup);

kernel/arch/sh/boards/mach-rsk/setup.c

@@ -0,0 +1,111 @@
+/*
+ * Renesas Technology Europe RSK+ Support.
+ *
+ * Copyright (C) 2008 Paul Mundt
+ * Copyright (C) 2008 Peter Griffin <pgriffin@mpc-data.co.uk>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#ifdef CONFIG_MTD
+#include <linux/mtd/map.h>
+#endif
+#include <asm/machvec.h>
+#include <asm/io.h>
+
+static struct mtd_partition rsk_partitions[] = {
+	{
+		.name		= "Bootloader",
+		.offset		= 0x00000000,
+		.size		= 0x00040000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "Kernel",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= 0x001c0000,
+	}, {
+		.name		= "Flash_FS",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct physmap_flash_data flash_data = {
+	.parts		= rsk_partitions,
+	.nr_parts	= ARRAY_SIZE(rsk_partitions),
+	.width		= 2,
+};
+
+static struct resource flash_resource = {
+	.start		= 0x20000000,
+	.end		= 0x20400000,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.resource	= &flash_resource,
+	.num_resources	= 1,
+	.dev		= {
+		.platform_data = &flash_data,
+	},
+};
+
+#ifdef CONFIG_MTD
+static const char *probes[] = { "cmdlinepart", NULL };
+
+static struct map_info rsk_flash_map = {
+	.name		= "RSK+ Flash",
+	.size		= 0x400000,
+	.bankwidth	= 2,
+};
+
+static struct mtd_info *flash_mtd;
+
+static struct mtd_partition *parsed_partitions;
+
+static void __init set_mtd_partitions(void)
+{
+	int nr_parts = 0;
+
+	simple_map_init(&rsk_flash_map);
+	flash_mtd = do_map_probe("cfi_probe", &rsk_flash_map);
+	nr_parts = parse_mtd_partitions(flash_mtd, probes,
+					&parsed_partitions, 0);
+	/* If there is no partition table, used the hard coded table */
+	if (nr_parts > 0) {
+		flash_data.nr_parts = nr_parts;
+		flash_data.parts = parsed_partitions;
+	}
+}
+#else
+static inline void set_mtd_partitions(void) {}
+#endif
+
+static struct platform_device *rsk_devices[] __initdata = {
+	&flash_device,
+};
+
+static int __init rsk_devices_setup(void)
+{
+	set_mtd_partitions();
+	return platform_add_devices(rsk_devices,
+				    ARRAY_SIZE(rsk_devices));
+}
+device_initcall(rsk_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_rsk __initmv = {
+	.mv_name        = "RSK+",
+};