frodovdr/satip-axe
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

add idl4k kernel firmware version 1.13.0.105

Browse Source
This commit is contained in:
Jaroslav Kysela
2015-03-26 17:22:37 +01:00
parent 5194d2792e
commit e9070cdc77
31064 changed files with 12769984 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

799
kernel/drivers/message/fusion/lsi/mpi.h Normal file
View File

@@ -0,0 +1,799 @@
/*
* Copyright (c) 2000-2008 LSI Corporation.
*
*
* Name: mpi.h
* Title: MPI Message independent structures and definitions
* Creation Date: July 27, 2000
*
* mpi.h Version: 01.05.16
*
* Version History
* ---------------
*
* Date Version Description
* -------- -------- ------------------------------------------------------
* 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
* 05-24-00 00.10.02 Added MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH definition.
* 06-06-00 01.00.01 Update MPI_VERSION_MAJOR and MPI_VERSION_MINOR.
* 06-22-00 01.00.02 Added MPI_IOCSTATUS_LAN_ definitions.
* Removed LAN_SUSPEND function definition.
* Added MPI_MSGFLAGS_CONTINUATION_REPLY definition.
* 06-30-00 01.00.03 Added MPI_CONTEXT_REPLY_TYPE_LAN definition.
* Added MPI_GET/SET_CONTEXT_REPLY_TYPE macros.
* 07-27-00 01.00.04 Added MPI_FAULT_ definitions.
* Removed MPI_IOCSTATUS_MSG/DATA_XFER_ERROR definitions.
* Added MPI_IOCSTATUS_INTERNAL_ERROR definition.
* Added MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH.
* 11-02-00 01.01.01 Original release for post 1.0 work.
* 12-04-00 01.01.02 Added new function codes.
* 01-09-01 01.01.03 Added more definitions to the system interface section
* Added MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT.
* 01-25-01 01.01.04 Changed MPI_VERSION_MINOR from 0x00 to 0x01.
* 02-20-01 01.01.05 Started using MPI_POINTER.
* Fixed value for MPI_DIAG_RW_ENABLE.
* Added defines for MPI_DIAG_PREVENT_IOC_BOOT and
* MPI_DIAG_CLEAR_FLASH_BAD_SIG.
* Obsoleted MPI_IOCSTATUS_TARGET_FC_ defines.
* 02-27-01 01.01.06 Removed MPI_HOST_INDEX_REGISTER define.
* Added function codes for RAID.
* 04-09-01 01.01.07 Added alternate define for MPI_DOORBELL_ACTIVE,
* MPI_DOORBELL_USED, to better match the spec.
* 08-08-01 01.02.01 Original release for v1.2 work.
* Changed MPI_VERSION_MINOR from 0x01 to 0x02.
* Added define MPI_FUNCTION_TOOLBOX.
* 09-28-01 01.02.02 New function code MPI_SCSI_ENCLOSURE_PROCESSOR.
* 11-01-01 01.02.03 Changed name to MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR.
* 03-14-02 01.02.04 Added MPI_HEADER_VERSION_ defines.
* 05-31-02 01.02.05 Bumped MPI_HEADER_VERSION_UNIT.
* 07-12-02 01.02.06 Added define for MPI_FUNCTION_MAILBOX.
* 09-16-02 01.02.07 Bumped value for MPI_HEADER_VERSION_UNIT.
* 11-15-02 01.02.08 Added define MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX and
* obsoleted define MPI_IOCSTATUS_TARGET_INVALID_IOCINDEX.
* 04-01-03 01.02.09 New IOCStatus code: MPI_IOCSTATUS_FC_EXCHANGE_CANCELED
* 06-26-03 01.02.10 Bumped MPI_HEADER_VERSION_UNIT value.
* 01-16-04 01.02.11 Added define for MPI_IOCLOGINFO_TYPE_SHIFT.
* 04-29-04 01.02.12 Added function codes for MPI_FUNCTION_DIAG_BUFFER_POST
* and MPI_FUNCTION_DIAG_RELEASE.
* Added MPI_IOCSTATUS_DIAGNOSTIC_RELEASED define.
* Bumped MPI_HEADER_VERSION_UNIT value.
* 05-11-04 01.03.01 Bumped MPI_VERSION_MINOR for MPI v1.3.
* Added codes for Inband.
* 08-19-04 01.05.01 Added defines for Host Buffer Access Control doorbell.
* Added define for offset of High Priority Request Queue.
* Added new function codes and new IOCStatus codes.
* Added a IOCLogInfo type of SAS.
* 12-07-04 01.05.02 Bumped MPI_HEADER_VERSION_UNIT.
* 12-09-04 01.05.03 Bumped MPI_HEADER_VERSION_UNIT.
* 01-15-05 01.05.04 Bumped MPI_HEADER_VERSION_UNIT.
* 02-09-05 01.05.05 Bumped MPI_HEADER_VERSION_UNIT.
* 02-22-05 01.05.06 Bumped MPI_HEADER_VERSION_UNIT.
* 03-11-05 01.05.07 Removed function codes for SCSI IO 32 and
* TargetAssistExtended requests.
* Removed EEDP IOCStatus codes.
* 06-24-05 01.05.08 Added function codes for SCSI IO 32 and
* TargetAssistExtended requests.
* Added EEDP IOCStatus codes.
* 08-03-05 01.05.09 Bumped MPI_HEADER_VERSION_UNIT.
* 08-30-05 01.05.10 Added 2 new IOCStatus codes for Target.
* 03-27-06 01.05.11 Bumped MPI_HEADER_VERSION_UNIT.
* 10-11-06 01.05.12 Bumped MPI_HEADER_VERSION_UNIT.
* 05-24-07 01.05.13 Bumped MPI_HEADER_VERSION_UNIT.
* 08-07-07 01.05.14 Bumped MPI_HEADER_VERSION_UNIT.
* 01-15-08 01.05.15 Bumped MPI_HEADER_VERSION_UNIT.
* 03-28-08 01.05.16 Bumped MPI_HEADER_VERSION_UNIT.
* --------------------------------------------------------------------------
*/
#ifndef MPI_H
#define MPI_H
/*****************************************************************************
*
* M P I V e r s i o n D e f i n i t i o n s
*
*****************************************************************************/
#define MPI_VERSION_MAJOR (0x01)
#define MPI_VERSION_MINOR (0x05)
#define MPI_VERSION_MAJOR_MASK (0xFF00)
#define MPI_VERSION_MAJOR_SHIFT (8)
#define MPI_VERSION_MINOR_MASK (0x00FF)
#define MPI_VERSION_MINOR_SHIFT (0)
#define MPI_VERSION ((MPI_VERSION_MAJOR << MPI_VERSION_MAJOR_SHIFT) | \
MPI_VERSION_MINOR)
#define MPI_VERSION_01_00 (0x0100)
#define MPI_VERSION_01_01 (0x0101)
#define MPI_VERSION_01_02 (0x0102)
#define MPI_VERSION_01_03 (0x0103)
#define MPI_VERSION_01_05 (0x0105)
/* Note: The major versions of 0xe0 through 0xff are reserved */
/* versioning for this MPI header set */
#define MPI_HEADER_VERSION_UNIT (0x13)
#define MPI_HEADER_VERSION_DEV (0x00)
#define MPI_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI_HEADER_VERSION_UNIT_SHIFT (8)
#define MPI_HEADER_VERSION_DEV_MASK (0x00FF)
#define MPI_HEADER_VERSION_DEV_SHIFT (0)
#define MPI_HEADER_VERSION ((MPI_HEADER_VERSION_UNIT << 8) | MPI_HEADER_VERSION_DEV)
/*****************************************************************************
*
* I O C S t a t e D e f i n i t i o n s
*
*****************************************************************************/
#define MPI_IOC_STATE_RESET (0x00000000)
#define MPI_IOC_STATE_READY (0x10000000)
#define MPI_IOC_STATE_OPERATIONAL (0x20000000)
#define MPI_IOC_STATE_FAULT (0x40000000)
#define MPI_IOC_STATE_MASK (0xF0000000)
#define MPI_IOC_STATE_SHIFT (28)
/* Fault state codes (product independent range 0x8000-0xFFFF) */
#define MPI_FAULT_REQUEST_MESSAGE_PCI_PARITY_ERROR (0x8111)
#define MPI_FAULT_REQUEST_MESSAGE_PCI_BUS_FAULT (0x8112)
#define MPI_FAULT_REPLY_MESSAGE_PCI_PARITY_ERROR (0x8113)
#define MPI_FAULT_REPLY_MESSAGE_PCI_BUS_FAULT (0x8114)
#define MPI_FAULT_DATA_SEND_PCI_PARITY_ERROR (0x8115)
#define MPI_FAULT_DATA_SEND_PCI_BUS_FAULT (0x8116)
#define MPI_FAULT_DATA_RECEIVE_PCI_PARITY_ERROR (0x8117)
#define MPI_FAULT_DATA_RECEIVE_PCI_BUS_FAULT (0x8118)
/*****************************************************************************
*
* P C I S y s t e m I n t e r f a c e R e g i s t e r s
*
*****************************************************************************/
/*
* Defines for working with the System Doorbell register.
* Values for doorbell function codes are included in the section that defines
* all the function codes (further on in this file).
*/
#define MPI_DOORBELL_OFFSET (0x00000000)
#define MPI_DOORBELL_ACTIVE (0x08000000) /* DoorbellUsed */
#define MPI_DOORBELL_USED (MPI_DOORBELL_ACTIVE)
#define MPI_DOORBELL_ACTIVE_SHIFT (27)
#define MPI_DOORBELL_WHO_INIT_MASK (0x07000000)
#define MPI_DOORBELL_WHO_INIT_SHIFT (24)
#define MPI_DOORBELL_FUNCTION_MASK (0xFF000000)
#define MPI_DOORBELL_FUNCTION_SHIFT (24)
#define MPI_DOORBELL_ADD_DWORDS_MASK (0x00FF0000)
#define MPI_DOORBELL_ADD_DWORDS_SHIFT (16)
#define MPI_DOORBELL_DATA_MASK (0x0000FFFF)
#define MPI_DOORBELL_FUNCTION_SPECIFIC_MASK (0x0000FFFF)
/* values for Host Buffer Access Control doorbell function */
#define MPI_DB_HPBAC_VALUE_MASK (0x0000F000)
#define MPI_DB_HPBAC_ENABLE_ACCESS (0x01)
#define MPI_DB_HPBAC_DISABLE_ACCESS (0x02)
#define MPI_DB_HPBAC_FREE_BUFFER (0x03)
#define MPI_WRITE_SEQUENCE_OFFSET (0x00000004)
#define MPI_WRSEQ_KEY_VALUE_MASK (0x0000000F)
#define MPI_WRSEQ_1ST_KEY_VALUE (0x04)
#define MPI_WRSEQ_2ND_KEY_VALUE (0x0B)
#define MPI_WRSEQ_3RD_KEY_VALUE (0x02)
#define MPI_WRSEQ_4TH_KEY_VALUE (0x07)
#define MPI_WRSEQ_5TH_KEY_VALUE (0x0D)
#define MPI_DIAGNOSTIC_OFFSET (0x00000008)
#define MPI_DIAG_CLEAR_FLASH_BAD_SIG (0x00000400)
#define MPI_DIAG_PREVENT_IOC_BOOT (0x00000200)
#define MPI_DIAG_DRWE (0x00000080)
#define MPI_DIAG_FLASH_BAD_SIG (0x00000040)
#define MPI_DIAG_RESET_HISTORY (0x00000020)
#define MPI_DIAG_RW_ENABLE (0x00000010)
#define MPI_DIAG_RESET_ADAPTER (0x00000004)
#define MPI_DIAG_DISABLE_ARM (0x00000002)
#define MPI_DIAG_MEM_ENABLE (0x00000001)
#define MPI_TEST_BASE_ADDRESS_OFFSET (0x0000000C)
#define MPI_DIAG_RW_DATA_OFFSET (0x00000010)
#define MPI_DIAG_RW_ADDRESS_OFFSET (0x00000014)
#define MPI_HOST_INTERRUPT_STATUS_OFFSET (0x00000030)
#define MPI_HIS_IOP_DOORBELL_STATUS (0x80000000)
#define MPI_HIS_REPLY_MESSAGE_INTERRUPT (0x00000008)
#define MPI_HIS_DOORBELL_INTERRUPT (0x00000001)
#define MPI_HOST_INTERRUPT_MASK_OFFSET (0x00000034)
#define MPI_HIM_RIM (0x00000008)
#define MPI_HIM_DIM (0x00000001)
#define MPI_REQUEST_QUEUE_OFFSET (0x00000040)
#define MPI_REQUEST_POST_FIFO_OFFSET (0x00000040)
#define MPI_REPLY_QUEUE_OFFSET (0x00000044)
#define MPI_REPLY_POST_FIFO_OFFSET (0x00000044)
#define MPI_REPLY_FREE_FIFO_OFFSET (0x00000044)
#define MPI_HI_PRI_REQUEST_QUEUE_OFFSET (0x00000048)
/*****************************************************************************
*
* M e s s a g e F r a m e D e s c r i p t o r s
*
*****************************************************************************/
#define MPI_REQ_MF_DESCRIPTOR_NB_MASK (0x00000003)
#define MPI_REQ_MF_DESCRIPTOR_F_BIT (0x00000004)
#define MPI_REQ_MF_DESCRIPTOR_ADDRESS_MASK (0xFFFFFFF8)
#define MPI_ADDRESS_REPLY_A_BIT (0x80000000)
#define MPI_ADDRESS_REPLY_ADDRESS_MASK (0x7FFFFFFF)
#define MPI_CONTEXT_REPLY_A_BIT (0x80000000)
#define MPI_CONTEXT_REPLY_TYPE_MASK (0x60000000)
#define MPI_CONTEXT_REPLY_TYPE_SCSI_INIT (0x00)
#define MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET (0x01)
#define MPI_CONTEXT_REPLY_TYPE_LAN (0x02)
#define MPI_CONTEXT_REPLY_TYPE_SHIFT (29)
#define MPI_CONTEXT_REPLY_CONTEXT_MASK (0x1FFFFFFF)
/****************************************************************************/
/* Context Reply macros */
/****************************************************************************/
#define MPI_GET_CONTEXT_REPLY_TYPE(x) (((x) & MPI_CONTEXT_REPLY_TYPE_MASK) \
>> MPI_CONTEXT_REPLY_TYPE_SHIFT)
#define MPI_SET_CONTEXT_REPLY_TYPE(x, typ) \
((x) = ((x) & ~MPI_CONTEXT_REPLY_TYPE_MASK) | \
(((typ) << MPI_CONTEXT_REPLY_TYPE_SHIFT) & \
MPI_CONTEXT_REPLY_TYPE_MASK))
/*****************************************************************************
*
* M e s s a g e F u n c t i o n s
* 0x80 -> 0x8F reserved for private message use per product
*
*
*****************************************************************************/
#define MPI_FUNCTION_SCSI_IO_REQUEST (0x00)
#define MPI_FUNCTION_SCSI_TASK_MGMT (0x01)
#define MPI_FUNCTION_IOC_INIT (0x02)
#define MPI_FUNCTION_IOC_FACTS (0x03)
#define MPI_FUNCTION_CONFIG (0x04)
#define MPI_FUNCTION_PORT_FACTS (0x05)
#define MPI_FUNCTION_PORT_ENABLE (0x06)
#define MPI_FUNCTION_EVENT_NOTIFICATION (0x07)
#define MPI_FUNCTION_EVENT_ACK (0x08)
#define MPI_FUNCTION_FW_DOWNLOAD (0x09)
#define MPI_FUNCTION_TARGET_CMD_BUFFER_POST (0x0A)
#define MPI_FUNCTION_TARGET_ASSIST (0x0B)
#define MPI_FUNCTION_TARGET_STATUS_SEND (0x0C)
#define MPI_FUNCTION_TARGET_MODE_ABORT (0x0D)
#define MPI_FUNCTION_FC_LINK_SRVC_BUF_POST (0x0E)
#define MPI_FUNCTION_FC_LINK_SRVC_RSP (0x0F)
#define MPI_FUNCTION_FC_EX_LINK_SRVC_SEND (0x10)
#define MPI_FUNCTION_FC_ABORT (0x11)
#define MPI_FUNCTION_FW_UPLOAD (0x12)
#define MPI_FUNCTION_FC_COMMON_TRANSPORT_SEND (0x13)
#define MPI_FUNCTION_FC_PRIMITIVE_SEND (0x14)
#define MPI_FUNCTION_RAID_ACTION (0x15)
#define MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH (0x16)
#define MPI_FUNCTION_TOOLBOX (0x17)
#define MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR (0x18)
#define MPI_FUNCTION_MAILBOX (0x19)
#define MPI_FUNCTION_SMP_PASSTHROUGH (0x1A)
#define MPI_FUNCTION_SAS_IO_UNIT_CONTROL (0x1B)
#define MPI_FUNCTION_SATA_PASSTHROUGH (0x1C)
#define MPI_FUNCTION_DIAG_BUFFER_POST (0x1D)
#define MPI_FUNCTION_DIAG_RELEASE (0x1E)
#define MPI_FUNCTION_SCSI_IO_32 (0x1F)
#define MPI_FUNCTION_LAN_SEND (0x20)
#define MPI_FUNCTION_LAN_RECEIVE (0x21)
#define MPI_FUNCTION_LAN_RESET (0x22)
#define MPI_FUNCTION_TARGET_ASSIST_EXTENDED (0x23)
#define MPI_FUNCTION_TARGET_CMD_BUF_BASE_POST (0x24)
#define MPI_FUNCTION_TARGET_CMD_BUF_LIST_POST (0x25)
#define MPI_FUNCTION_INBAND_BUFFER_POST (0x28)
#define MPI_FUNCTION_INBAND_SEND (0x29)
#define MPI_FUNCTION_INBAND_RSP (0x2A)
#define MPI_FUNCTION_INBAND_ABORT (0x2B)
#define MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET (0x40)
#define MPI_FUNCTION_IO_UNIT_RESET (0x41)
#define MPI_FUNCTION_HANDSHAKE (0x42)
#define MPI_FUNCTION_REPLY_FRAME_REMOVAL (0x43)
#define MPI_FUNCTION_HOST_PAGEBUF_ACCESS_CONTROL (0x44)
/* standard version format */
typedef struct _MPI_VERSION_STRUCT
{
U8 Dev; /* 00h */
U8 Unit; /* 01h */
U8 Minor; /* 02h */
U8 Major; /* 03h */
} MPI_VERSION_STRUCT, MPI_POINTER PTR_MPI_VERSION_STRUCT,
MpiVersionStruct_t, MPI_POINTER pMpiVersionStruct;
typedef union _MPI_VERSION_FORMAT
{
MPI_VERSION_STRUCT Struct;
U32 Word;
} MPI_VERSION_FORMAT, MPI_POINTER PTR_MPI_VERSION_FORMAT,
MpiVersionFormat_t, MPI_POINTER pMpiVersionFormat_t;
/*****************************************************************************
*
* S c a t t e r G a t h e r E l e m e n t s
*
*****************************************************************************/
/****************************************************************************/
/* Simple element structures */
/****************************************************************************/
typedef struct _SGE_SIMPLE32
{
U32 FlagsLength;
U32 Address;
} SGE_SIMPLE32, MPI_POINTER PTR_SGE_SIMPLE32,
SGESimple32_t, MPI_POINTER pSGESimple32_t;
typedef struct _SGE_SIMPLE64
{
U32 FlagsLength;
U64 Address;
} SGE_SIMPLE64, MPI_POINTER PTR_SGE_SIMPLE64,
SGESimple64_t, MPI_POINTER pSGESimple64_t;
typedef struct _SGE_SIMPLE_UNION
{
U32 FlagsLength;
union
{
U32 Address32;
U64 Address64;
}u;
} SGE_SIMPLE_UNION, MPI_POINTER PTR_SGE_SIMPLE_UNION,
SGESimpleUnion_t, MPI_POINTER pSGESimpleUnion_t;
/****************************************************************************/
/* Chain element structures */
/****************************************************************************/
typedef struct _SGE_CHAIN32
{
U16 Length;
U8 NextChainOffset;
U8 Flags;
U32 Address;
} SGE_CHAIN32, MPI_POINTER PTR_SGE_CHAIN32,
SGEChain32_t, MPI_POINTER pSGEChain32_t;
typedef struct _SGE_CHAIN64
{
U16 Length;
U8 NextChainOffset;
U8 Flags;
U64 Address;
} SGE_CHAIN64, MPI_POINTER PTR_SGE_CHAIN64,
SGEChain64_t, MPI_POINTER pSGEChain64_t;
typedef struct _SGE_CHAIN_UNION
{
U16 Length;
U8 NextChainOffset;
U8 Flags;
union
{
U32 Address32;
U64 Address64;
}u;
} SGE_CHAIN_UNION, MPI_POINTER PTR_SGE_CHAIN_UNION,
SGEChainUnion_t, MPI_POINTER pSGEChainUnion_t;
/****************************************************************************/
/* Transaction Context element */
/****************************************************************************/
typedef struct _SGE_TRANSACTION32
{
U8 Reserved;
U8 ContextSize;
U8 DetailsLength;
U8 Flags;
U32 TransactionContext[1];
U32 TransactionDetails[1];
} SGE_TRANSACTION32, MPI_POINTER PTR_SGE_TRANSACTION32,
SGETransaction32_t, MPI_POINTER pSGETransaction32_t;
typedef struct _SGE_TRANSACTION64
{
U8 Reserved;
U8 ContextSize;
U8 DetailsLength;
U8 Flags;
U32 TransactionContext[2];
U32 TransactionDetails[1];
} SGE_TRANSACTION64, MPI_POINTER PTR_SGE_TRANSACTION64,
SGETransaction64_t, MPI_POINTER pSGETransaction64_t;
typedef struct _SGE_TRANSACTION96
{
U8 Reserved;
U8 ContextSize;
U8 DetailsLength;
U8 Flags;
U32 TransactionContext[3];
U32 TransactionDetails[1];
} SGE_TRANSACTION96, MPI_POINTER PTR_SGE_TRANSACTION96,
SGETransaction96_t, MPI_POINTER pSGETransaction96_t;
typedef struct _SGE_TRANSACTION128
{
U8 Reserved;
U8 ContextSize;
U8 DetailsLength;
U8 Flags;
U32 TransactionContext[4];
U32 TransactionDetails[1];
} SGE_TRANSACTION128, MPI_POINTER PTR_SGE_TRANSACTION128,
SGETransaction_t128, MPI_POINTER pSGETransaction_t128;
typedef struct _SGE_TRANSACTION_UNION
{
U8 Reserved;
U8 ContextSize;
U8 DetailsLength;
U8 Flags;
union
{
U32 TransactionContext32[1];
U32 TransactionContext64[2];
U32 TransactionContext96[3];
U32 TransactionContext128[4];
}u;
U32 TransactionDetails[1];
} SGE_TRANSACTION_UNION, MPI_POINTER PTR_SGE_TRANSACTION_UNION,
SGETransactionUnion_t, MPI_POINTER pSGETransactionUnion_t;
/****************************************************************************/
/* SGE IO types union for IO SGL's */
/****************************************************************************/
typedef struct _SGE_IO_UNION
{
union
{
SGE_SIMPLE_UNION Simple;
SGE_CHAIN_UNION Chain;
} u;
} SGE_IO_UNION, MPI_POINTER PTR_SGE_IO_UNION,
SGEIOUnion_t, MPI_POINTER pSGEIOUnion_t;
/****************************************************************************/
/* SGE union for SGL's with Simple and Transaction elements */
/****************************************************************************/
typedef struct _SGE_TRANS_SIMPLE_UNION
{
union
{
SGE_SIMPLE_UNION Simple;
SGE_TRANSACTION_UNION Transaction;
} u;
} SGE_TRANS_SIMPLE_UNION, MPI_POINTER PTR_SGE_TRANS_SIMPLE_UNION,
SGETransSimpleUnion_t, MPI_POINTER pSGETransSimpleUnion_t;
/****************************************************************************/
/* All SGE types union */
/****************************************************************************/
typedef struct _SGE_MPI_UNION
{
union
{
SGE_SIMPLE_UNION Simple;
SGE_CHAIN_UNION Chain;
SGE_TRANSACTION_UNION Transaction;
} u;
} SGE_MPI_UNION, MPI_POINTER PTR_SGE_MPI_UNION,
MPI_SGE_UNION_t, MPI_POINTER pMPI_SGE_UNION_t,
SGEAllUnion_t, MPI_POINTER pSGEAllUnion_t;
/****************************************************************************/
/* SGE field definition and masks */
/****************************************************************************/
/* Flags field bit definitions */
#define MPI_SGE_FLAGS_LAST_ELEMENT (0x80)
#define MPI_SGE_FLAGS_END_OF_BUFFER (0x40)
#define MPI_SGE_FLAGS_ELEMENT_TYPE_MASK (0x30)
#define MPI_SGE_FLAGS_LOCAL_ADDRESS (0x08)
#define MPI_SGE_FLAGS_DIRECTION (0x04)
#define MPI_SGE_FLAGS_ADDRESS_SIZE (0x02)
#define MPI_SGE_FLAGS_END_OF_LIST (0x01)
#define MPI_SGE_FLAGS_SHIFT (24)
#define MPI_SGE_LENGTH_MASK (0x00FFFFFF)
#define MPI_SGE_CHAIN_LENGTH_MASK (0x0000FFFF)
/* Element Type */
#define MPI_SGE_FLAGS_TRANSACTION_ELEMENT (0x00)
#define MPI_SGE_FLAGS_SIMPLE_ELEMENT (0x10)
#define MPI_SGE_FLAGS_CHAIN_ELEMENT (0x30)
#define MPI_SGE_FLAGS_ELEMENT_MASK (0x30)
/* Address location */
#define MPI_SGE_FLAGS_SYSTEM_ADDRESS (0x00)
/* Direction */
#define MPI_SGE_FLAGS_IOC_TO_HOST (0x00)
#define MPI_SGE_FLAGS_HOST_TO_IOC (0x04)
/* Address Size */
#define MPI_SGE_FLAGS_32_BIT_ADDRESSING (0x00)
#define MPI_SGE_FLAGS_64_BIT_ADDRESSING (0x02)
/* Context Size */
#define MPI_SGE_FLAGS_32_BIT_CONTEXT (0x00)
#define MPI_SGE_FLAGS_64_BIT_CONTEXT (0x02)
#define MPI_SGE_FLAGS_96_BIT_CONTEXT (0x04)
#define MPI_SGE_FLAGS_128_BIT_CONTEXT (0x06)
#define MPI_SGE_CHAIN_OFFSET_MASK (0x00FF0000)
#define MPI_SGE_CHAIN_OFFSET_SHIFT (16)
/****************************************************************************/
/* SGE operation Macros */
/****************************************************************************/
/* SIMPLE FlagsLength manipulations... */
#define MPI_SGE_SET_FLAGS(f) ((U32)(f) << MPI_SGE_FLAGS_SHIFT)
#define MPI_SGE_GET_FLAGS(fl) (((fl) & ~MPI_SGE_LENGTH_MASK) >> MPI_SGE_FLAGS_SHIFT)
#define MPI_SGE_LENGTH(fl) ((fl) & MPI_SGE_LENGTH_MASK)
#define MPI_SGE_CHAIN_LENGTH(fl) ((fl) & MPI_SGE_CHAIN_LENGTH_MASK)
#define MPI_SGE_SET_FLAGS_LENGTH(f,l) (MPI_SGE_SET_FLAGS(f) | MPI_SGE_LENGTH(l))
#define MPI_pSGE_GET_FLAGS(psg) MPI_SGE_GET_FLAGS((psg)->FlagsLength)
#define MPI_pSGE_GET_LENGTH(psg) MPI_SGE_LENGTH((psg)->FlagsLength)
#define MPI_pSGE_SET_FLAGS_LENGTH(psg,f,l) (psg)->FlagsLength = MPI_SGE_SET_FLAGS_LENGTH(f,l)
/* CAUTION - The following are READ-MODIFY-WRITE! */
#define MPI_pSGE_SET_FLAGS(psg,f) (psg)->FlagsLength |= MPI_SGE_SET_FLAGS(f)
#define MPI_pSGE_SET_LENGTH(psg,l) (psg)->FlagsLength |= MPI_SGE_LENGTH(l)
#define MPI_GET_CHAIN_OFFSET(x) ((x&MPI_SGE_CHAIN_OFFSET_MASK)>>MPI_SGE_CHAIN_OFFSET_SHIFT)
/*****************************************************************************
*
* S t a n d a r d M e s s a g e S t r u c t u r e s
*
*****************************************************************************/
/****************************************************************************/
/* Standard message request header for all request messages */
/****************************************************************************/
typedef struct _MSG_REQUEST_HEADER
{
U8 Reserved[2]; /* function specific */
U8 ChainOffset;
U8 Function;
U8 Reserved1[3]; /* function specific */
U8 MsgFlags;
U32 MsgContext;
} MSG_REQUEST_HEADER, MPI_POINTER PTR_MSG_REQUEST_HEADER,
MPIHeader_t, MPI_POINTER pMPIHeader_t;
/****************************************************************************/
/* Default Reply */
/****************************************************************************/
typedef struct _MSG_DEFAULT_REPLY
{
U8 Reserved[2]; /* function specific */
U8 MsgLength;
U8 Function;
U8 Reserved1[3]; /* function specific */
U8 MsgFlags;
U32 MsgContext;
U8 Reserved2[2]; /* function specific */
U16 IOCStatus;
U32 IOCLogInfo;
} MSG_DEFAULT_REPLY, MPI_POINTER PTR_MSG_DEFAULT_REPLY,
MPIDefaultReply_t, MPI_POINTER pMPIDefaultReply_t;
/* MsgFlags definition for all replies */
#define MPI_MSGFLAGS_CONTINUATION_REPLY (0x80)
/*****************************************************************************
*
* I O C S t a t u s V a l u e s
*
*****************************************************************************/
/****************************************************************************/
/* Common IOCStatus values for all replies */
/****************************************************************************/
#define MPI_IOCSTATUS_SUCCESS (0x0000)
#define MPI_IOCSTATUS_INVALID_FUNCTION (0x0001)
#define MPI_IOCSTATUS_BUSY (0x0002)
#define MPI_IOCSTATUS_INVALID_SGL (0x0003)
#define MPI_IOCSTATUS_INTERNAL_ERROR (0x0004)
#define MPI_IOCSTATUS_RESERVED (0x0005)
#define MPI_IOCSTATUS_INSUFFICIENT_RESOURCES (0x0006)
#define MPI_IOCSTATUS_INVALID_FIELD (0x0007)
#define MPI_IOCSTATUS_INVALID_STATE (0x0008)
#define MPI_IOCSTATUS_OP_STATE_NOT_SUPPORTED (0x0009)
/****************************************************************************/
/* Config IOCStatus values */
/****************************************************************************/
#define MPI_IOCSTATUS_CONFIG_INVALID_ACTION (0x0020)
#define MPI_IOCSTATUS_CONFIG_INVALID_TYPE (0x0021)
#define MPI_IOCSTATUS_CONFIG_INVALID_PAGE (0x0022)
#define MPI_IOCSTATUS_CONFIG_INVALID_DATA (0x0023)
#define MPI_IOCSTATUS_CONFIG_NO_DEFAULTS (0x0024)
#define MPI_IOCSTATUS_CONFIG_CANT_COMMIT (0x0025)
/****************************************************************************/
/* SCSIIO Reply (SPI & FCP) initiator values */
/****************************************************************************/
#define MPI_IOCSTATUS_SCSI_RECOVERED_ERROR (0x0040)
#define MPI_IOCSTATUS_SCSI_INVALID_BUS (0x0041)
#define MPI_IOCSTATUS_SCSI_INVALID_TARGETID (0x0042)
#define MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE (0x0043)
#define MPI_IOCSTATUS_SCSI_DATA_OVERRUN (0x0044)
#define MPI_IOCSTATUS_SCSI_DATA_UNDERRUN (0x0045)
#define MPI_IOCSTATUS_SCSI_IO_DATA_ERROR (0x0046)
#define MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR (0x0047)
#define MPI_IOCSTATUS_SCSI_TASK_TERMINATED (0x0048)
#define MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH (0x0049)
#define MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED (0x004A)
#define MPI_IOCSTATUS_SCSI_IOC_TERMINATED (0x004B)
#define MPI_IOCSTATUS_SCSI_EXT_TERMINATED (0x004C)
/****************************************************************************/
/* For use by SCSI Initiator and SCSI Target end-to-end data protection */
/****************************************************************************/
#define MPI_IOCSTATUS_EEDP_GUARD_ERROR (0x004D)
#define MPI_IOCSTATUS_EEDP_REF_TAG_ERROR (0x004E)
#define MPI_IOCSTATUS_EEDP_APP_TAG_ERROR (0x004F)
/****************************************************************************/
/* SCSI Target values */
/****************************************************************************/
#define MPI_IOCSTATUS_TARGET_PRIORITY_IO (0x0060)
#define MPI_IOCSTATUS_TARGET_INVALID_PORT (0x0061)
#define MPI_IOCSTATUS_TARGET_INVALID_IOCINDEX (0x0062) /* obsolete name */
#define MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX (0x0062)
#define MPI_IOCSTATUS_TARGET_ABORTED (0x0063)
#define MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE (0x0064)
#define MPI_IOCSTATUS_TARGET_NO_CONNECTION (0x0065)
#define MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH (0x006A)
#define MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT (0x006B)
#define MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR (0x006D)
#define MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA (0x006E)
#define MPI_IOCSTATUS_TARGET_IU_TOO_SHORT (0x006F)
#define MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT (0x0070)
#define MPI_IOCSTATUS_TARGET_NAK_RECEIVED (0x0071)
/****************************************************************************/
/* Additional FCP target values (obsolete) */
/****************************************************************************/
#define MPI_IOCSTATUS_TARGET_FC_ABORTED (0x0066) /* obsolete */
#define MPI_IOCSTATUS_TARGET_FC_RX_ID_INVALID (0x0067) /* obsolete */
#define MPI_IOCSTATUS_TARGET_FC_DID_INVALID (0x0068) /* obsolete */
#define MPI_IOCSTATUS_TARGET_FC_NODE_LOGGED_OUT (0x0069) /* obsolete */
/****************************************************************************/
/* Fibre Channel Direct Access values */
/****************************************************************************/
#define MPI_IOCSTATUS_FC_ABORTED (0x0066)
#define MPI_IOCSTATUS_FC_RX_ID_INVALID (0x0067)
#define MPI_IOCSTATUS_FC_DID_INVALID (0x0068)
#define MPI_IOCSTATUS_FC_NODE_LOGGED_OUT (0x0069)
#define MPI_IOCSTATUS_FC_EXCHANGE_CANCELED (0x006C)
/****************************************************************************/
/* LAN values */
/****************************************************************************/
#define MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND (0x0080)
#define MPI_IOCSTATUS_LAN_DEVICE_FAILURE (0x0081)
#define MPI_IOCSTATUS_LAN_TRANSMIT_ERROR (0x0082)
#define MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED (0x0083)
#define MPI_IOCSTATUS_LAN_RECEIVE_ERROR (0x0084)
#define MPI_IOCSTATUS_LAN_RECEIVE_ABORTED (0x0085)
#define MPI_IOCSTATUS_LAN_PARTIAL_PACKET (0x0086)
#define MPI_IOCSTATUS_LAN_CANCELED (0x0087)
/****************************************************************************/
/* Serial Attached SCSI values */
/****************************************************************************/
#define MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED (0x0090)
#define MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN (0x0091)
/****************************************************************************/
/* Inband values */
/****************************************************************************/
#define MPI_IOCSTATUS_INBAND_ABORTED (0x0098)
#define MPI_IOCSTATUS_INBAND_NO_CONNECTION (0x0099)
/****************************************************************************/
/* Diagnostic Tools values */
/****************************************************************************/
#define MPI_IOCSTATUS_DIAGNOSTIC_RELEASED (0x00A0)
/****************************************************************************/
/* IOCStatus flag to indicate that log info is available */
/****************************************************************************/
#define MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE (0x8000)
#define MPI_IOCSTATUS_MASK (0x7FFF)
/****************************************************************************/
/* LogInfo Types */
/****************************************************************************/
#define MPI_IOCLOGINFO_TYPE_MASK (0xF0000000)
#define MPI_IOCLOGINFO_TYPE_SHIFT (28)
#define MPI_IOCLOGINFO_TYPE_NONE (0x0)
#define MPI_IOCLOGINFO_TYPE_SCSI (0x1)
#define MPI_IOCLOGINFO_TYPE_FC (0x2)
#define MPI_IOCLOGINFO_TYPE_SAS (0x3)
#define MPI_IOCLOGINFO_TYPE_ISCSI (0x4)
#define MPI_IOCLOGINFO_LOG_DATA_MASK (0x0FFFFFFF)
#endif

3114
kernel/drivers/message/fusion/lsi/mpi_cnfg.h Normal file
View File

File diff suppressed because it is too large Load Diff

366
kernel/drivers/message/fusion/lsi/mpi_fc.h Normal file
View File

@@ -0,0 +1,366 @@
/*
* Copyright (c) 2000-2008 LSI Corporation.
*
*
* Name: mpi_fc.h
* Title: MPI Fibre Channel messages and structures
* Creation Date: June 12, 2000
*
* mpi_fc.h Version: 01.05.01
*
* Version History
* ---------------
*
* Date Version Description
* -------- -------- ------------------------------------------------------
* 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
* 06-06-00 01.00.01 Update version number for 1.0 release.
* 06-12-00 01.00.02 Added _MSG_FC_ABORT_REPLY structure.
* 11-02-00 01.01.01 Original release for post 1.0 work
* 12-04-00 01.01.02 Added messages for Common Transport Send and
* Primitive Send.
* 01-09-01 01.01.03 Modifed some of the new flags to have an MPI prefix
* and modified the FcPrimitiveSend flags.
* 01-25-01 01.01.04 Move InitiatorIndex in LinkServiceRsp reply to a larger
* field.
* Added FC_ABORT_TYPE_CT_SEND_REQUEST and
* FC_ABORT_TYPE_EXLINKSEND_REQUEST for FcAbort request.
* Added MPI_FC_PRIM_SEND_FLAGS_STOP_SEND.
* 02-20-01 01.01.05 Started using MPI_POINTER.
* 03-27-01 01.01.06 Added Flags field to MSG_LINK_SERVICE_BUFFER_POST_REPLY
* and defined MPI_LS_BUF_POST_REPLY_FLAG_NO_RSP_NEEDED.
* Added MPI_FC_PRIM_SEND_FLAGS_RESET_LINK define.
* Added structure offset comments.
* 04-09-01 01.01.07 Added RspLength field to MSG_LINK_SERVICE_RSP_REQUEST.
* 08-08-01 01.02.01 Original release for v1.2 work.
* 09-28-01 01.02.02 Change name of reserved field in
* MSG_LINK_SERVICE_RSP_REPLY.
* 05-31-02 01.02.03 Adding AliasIndex to FC Direct Access requests.
* 01-16-04 01.02.04 Added define for MPI_FC_PRIM_SEND_FLAGS_ML_RESET_LINK.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Original release for MPI v1.5.
* --------------------------------------------------------------------------
*/
#ifndef MPI_FC_H
#define MPI_FC_H
/*****************************************************************************
*
* F C D i r e c t A c c e s s M e s s a g e s
*
*****************************************************************************/
/****************************************************************************/
/* Link Service Buffer Post messages */
/****************************************************************************/
typedef struct _MSG_LINK_SERVICE_BUFFER_POST_REQUEST
{
U8 BufferPostFlags; /* 00h */
U8 BufferCount; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 Reserved; /* 04h */
U8 Reserved1; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
SGE_TRANS_SIMPLE_UNION SGL;
} MSG_LINK_SERVICE_BUFFER_POST_REQUEST,
MPI_POINTER PTR_MSG_LINK_SERVICE_BUFFER_POST_REQUEST,
LinkServiceBufferPostRequest_t, MPI_POINTER pLinkServiceBufferPostRequest_t;
#define LINK_SERVICE_BUFFER_POST_FLAGS_PORT_MASK (0x01)
typedef struct _WWNFORMAT
{
U32 PortNameHigh; /* 00h */
U32 PortNameLow; /* 04h */
U32 NodeNameHigh; /* 08h */
U32 NodeNameLow; /* 0Ch */
} WWNFORMAT,
WwnFormat_t;
/* Link Service Buffer Post Reply */
typedef struct _MSG_LINK_SERVICE_BUFFER_POST_REPLY
{
U8 Flags; /* 00h */
U8 Reserved; /* 01h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U16 Reserved1; /* 04h */
U8 PortNumber; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U16 Reserved2; /* 0Ch */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U32 TransferLength; /* 14h */
U32 TransactionContext; /* 18h */
U32 Rctl_Did; /* 1Ch */
U32 Csctl_Sid; /* 20h */
U32 Type_Fctl; /* 24h */
U16 SeqCnt; /* 28h */
U8 Dfctl; /* 2Ah */
U8 SeqId; /* 2Bh */
U16 Rxid; /* 2Ch */
U16 Oxid; /* 2Eh */
U32 Parameter; /* 30h */
WWNFORMAT Wwn; /* 34h */
} MSG_LINK_SERVICE_BUFFER_POST_REPLY, MPI_POINTER PTR_MSG_LINK_SERVICE_BUFFER_POST_REPLY,
LinkServiceBufferPostReply_t, MPI_POINTER pLinkServiceBufferPostReply_t;
#define MPI_LS_BUF_POST_REPLY_FLAG_NO_RSP_NEEDED (0x80)
#define MPI_FC_DID_MASK (0x00FFFFFF)
#define MPI_FC_DID_SHIFT (0)
#define MPI_FC_RCTL_MASK (0xFF000000)
#define MPI_FC_RCTL_SHIFT (24)
#define MPI_FC_SID_MASK (0x00FFFFFF)
#define MPI_FC_SID_SHIFT (0)
#define MPI_FC_CSCTL_MASK (0xFF000000)
#define MPI_FC_CSCTL_SHIFT (24)
#define MPI_FC_FCTL_MASK (0x00FFFFFF)
#define MPI_FC_FCTL_SHIFT (0)
#define MPI_FC_TYPE_MASK (0xFF000000)
#define MPI_FC_TYPE_SHIFT (24)
/* obsolete name for the above */
#define FCP_TARGET_DID_MASK (0x00FFFFFF)
#define FCP_TARGET_DID_SHIFT (0)
#define FCP_TARGET_RCTL_MASK (0xFF000000)
#define FCP_TARGET_RCTL_SHIFT (24)
#define FCP_TARGET_SID_MASK (0x00FFFFFF)
#define FCP_TARGET_SID_SHIFT (0)
#define FCP_TARGET_CSCTL_MASK (0xFF000000)
#define FCP_TARGET_CSCTL_SHIFT (24)
#define FCP_TARGET_FCTL_MASK (0x00FFFFFF)
#define FCP_TARGET_FCTL_SHIFT (0)
#define FCP_TARGET_TYPE_MASK (0xFF000000)
#define FCP_TARGET_TYPE_SHIFT (24)
/****************************************************************************/
/* Link Service Response messages */
/****************************************************************************/
typedef struct _MSG_LINK_SERVICE_RSP_REQUEST
{
U8 RspFlags; /* 00h */
U8 RspLength; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 Reserved1; /* 04h */
U8 Reserved2; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U32 Rctl_Did; /* 0Ch */
U32 Csctl_Sid; /* 10h */
U32 Type_Fctl; /* 14h */
U16 SeqCnt; /* 18h */
U8 Dfctl; /* 1Ah */
U8 SeqId; /* 1Bh */
U16 Rxid; /* 1Ch */
U16 Oxid; /* 1Eh */
U32 Parameter; /* 20h */
SGE_SIMPLE_UNION SGL; /* 24h */
} MSG_LINK_SERVICE_RSP_REQUEST, MPI_POINTER PTR_MSG_LINK_SERVICE_RSP_REQUEST,
LinkServiceRspRequest_t, MPI_POINTER pLinkServiceRspRequest_t;
#define LINK_SERVICE_RSP_FLAGS_IMMEDIATE (0x80)
#define LINK_SERVICE_RSP_FLAGS_PORT_MASK (0x01)
/* Link Service Response Reply */
typedef struct _MSG_LINK_SERVICE_RSP_REPLY
{
U16 Reserved; /* 00h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U16 Reserved1; /* 04h */
U8 Reserved_0100_InitiatorIndex; /* 06h */ /* obsolete InitiatorIndex */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U16 Reserved3; /* 0Ch */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U32 InitiatorIndex; /* 14h */
} MSG_LINK_SERVICE_RSP_REPLY, MPI_POINTER PTR_MSG_LINK_SERVICE_RSP_REPLY,
LinkServiceRspReply_t, MPI_POINTER pLinkServiceRspReply_t;
/****************************************************************************/
/* Extended Link Service Send messages */
/****************************************************************************/
typedef struct _MSG_EXLINK_SERVICE_SEND_REQUEST
{
U8 SendFlags; /* 00h */
U8 AliasIndex; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U32 MsgFlags_Did; /* 04h */
U32 MsgContext; /* 08h */
U32 ElsCommandCode; /* 0Ch */
SGE_SIMPLE_UNION SGL; /* 10h */
} MSG_EXLINK_SERVICE_SEND_REQUEST, MPI_POINTER PTR_MSG_EXLINK_SERVICE_SEND_REQUEST,
ExLinkServiceSendRequest_t, MPI_POINTER pExLinkServiceSendRequest_t;
#define EX_LINK_SERVICE_SEND_DID_MASK (0x00FFFFFF)
#define EX_LINK_SERVICE_SEND_DID_SHIFT (0)
#define EX_LINK_SERVICE_SEND_MSGFLAGS_MASK (0xFF000000)
#define EX_LINK_SERVICE_SEND_MSGFLAGS_SHIFT (24)
/* Extended Link Service Send Reply */
typedef struct _MSG_EXLINK_SERVICE_SEND_REPLY
{
U8 Reserved; /* 00h */
U8 AliasIndex; /* 01h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U16 Reserved1; /* 04h */
U8 Reserved2; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U16 Reserved3; /* 0Ch */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U32 ResponseLength; /* 14h */
} MSG_EXLINK_SERVICE_SEND_REPLY, MPI_POINTER PTR_MSG_EXLINK_SERVICE_SEND_REPLY,
ExLinkServiceSendReply_t, MPI_POINTER pExLinkServiceSendReply_t;
/****************************************************************************/
/* FC Abort messages */
/****************************************************************************/
typedef struct _MSG_FC_ABORT_REQUEST
{
U8 AbortFlags; /* 00h */
U8 AbortType; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 Reserved1; /* 04h */
U8 Reserved2; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U32 TransactionContextToAbort; /* 0Ch */
} MSG_FC_ABORT_REQUEST, MPI_POINTER PTR_MSG_FC_ABORT_REQUEST,
FcAbortRequest_t, MPI_POINTER pFcAbortRequest_t;
#define FC_ABORT_FLAG_PORT_MASK (0x01)
#define FC_ABORT_TYPE_ALL_FC_BUFFERS (0x00)
#define FC_ABORT_TYPE_EXACT_FC_BUFFER (0x01)
#define FC_ABORT_TYPE_CT_SEND_REQUEST (0x02)
#define FC_ABORT_TYPE_EXLINKSEND_REQUEST (0x03)
/* FC Abort Reply */
typedef struct _MSG_FC_ABORT_REPLY
{
U16 Reserved; /* 00h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U16 Reserved1; /* 04h */
U8 Reserved2; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U16 Reserved3; /* 0Ch */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
} MSG_FC_ABORT_REPLY, MPI_POINTER PTR_MSG_FC_ABORT_REPLY,
FcAbortReply_t, MPI_POINTER pFcAbortReply_t;
/****************************************************************************/
/* FC Common Transport Send messages */
/****************************************************************************/
typedef struct _MSG_FC_COMMON_TRANSPORT_SEND_REQUEST
{
U8 SendFlags; /* 00h */
U8 AliasIndex; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U32 MsgFlags_Did; /* 04h */
U32 MsgContext; /* 08h */
U16 CTCommandCode; /* 0Ch */
U8 FsType; /* 0Eh */
U8 Reserved1; /* 0Fh */
SGE_SIMPLE_UNION SGL; /* 10h */
} MSG_FC_COMMON_TRANSPORT_SEND_REQUEST,
MPI_POINTER PTR_MSG_FC_COMMON_TRANSPORT_SEND_REQUEST,
FcCommonTransportSendRequest_t, MPI_POINTER pFcCommonTransportSendRequest_t;
#define MPI_FC_CT_SEND_DID_MASK (0x00FFFFFF)
#define MPI_FC_CT_SEND_DID_SHIFT (0)
#define MPI_FC_CT_SEND_MSGFLAGS_MASK (0xFF000000)
#define MPI_FC_CT_SEND_MSGFLAGS_SHIFT (24)
/* FC Common Transport Send Reply */
typedef struct _MSG_FC_COMMON_TRANSPORT_SEND_REPLY
{
U8 Reserved; /* 00h */
U8 AliasIndex; /* 01h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U16 Reserved1; /* 04h */
U8 Reserved2; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U16 Reserved3; /* 0Ch */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U32 ResponseLength; /* 14h */
} MSG_FC_COMMON_TRANSPORT_SEND_REPLY, MPI_POINTER PTR_MSG_FC_COMMON_TRANSPORT_SEND_REPLY,
FcCommonTransportSendReply_t, MPI_POINTER pFcCommonTransportSendReply_t;
/****************************************************************************/
/* FC Primitive Send messages */
/****************************************************************************/
typedef struct _MSG_FC_PRIMITIVE_SEND_REQUEST
{
U8 SendFlags; /* 00h */
U8 Reserved; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 Reserved1; /* 04h */
U8 Reserved2; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 FcPrimitive[4]; /* 0Ch */
} MSG_FC_PRIMITIVE_SEND_REQUEST, MPI_POINTER PTR_MSG_FC_PRIMITIVE_SEND_REQUEST,
FcPrimitiveSendRequest_t, MPI_POINTER pFcPrimitiveSendRequest_t;
#define MPI_FC_PRIM_SEND_FLAGS_PORT_MASK (0x01)
#define MPI_FC_PRIM_SEND_FLAGS_ML_RESET_LINK (0x02)
#define MPI_FC_PRIM_SEND_FLAGS_RESET_LINK (0x04)
#define MPI_FC_PRIM_SEND_FLAGS_STOP_SEND (0x08)
#define MPI_FC_PRIM_SEND_FLAGS_SEND_ONCE (0x10)
#define MPI_FC_PRIM_SEND_FLAGS_SEND_AROUND (0x20)
#define MPI_FC_PRIM_SEND_FLAGS_UNTIL_FULL (0x40)
#define MPI_FC_PRIM_SEND_FLAGS_FOREVER (0x80)
/* FC Primitive Send Reply */
typedef struct _MSG_FC_PRIMITIVE_SEND_REPLY
{
U8 SendFlags; /* 00h */
U8 Reserved; /* 01h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U16 Reserved1; /* 04h */
U8 Reserved2; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U16 Reserved3; /* 0Ch */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
} MSG_FC_PRIMITIVE_SEND_REPLY, MPI_POINTER PTR_MSG_FC_PRIMITIVE_SEND_REPLY,
FcPrimitiveSendReply_t, MPI_POINTER pFcPrimitiveSendReply_t;
#endif

868
kernel/drivers/message/fusion/lsi/mpi_history.txt Normal file
View File

@@ -0,0 +1,868 @@
==============================
MPI Header File Change History
==============================
Copyright (c) 2000-2008 LSI Corporation.
---------------------------------------
Header Set Release Version: 01.05.19
Header Set Release Date: 03-28-08
---------------------------------------
Filename Current version Prior version
---------- --------------- -------------
mpi.h 01.05.16 01.05.15
mpi_ioc.h 01.05.16 01.05.15
mpi_cnfg.h 01.05.18 01.05.17
mpi_init.h 01.05.09 01.05.09
mpi_targ.h 01.05.06 01.05.06
mpi_fc.h 01.05.01 01.05.01
mpi_lan.h 01.05.01 01.05.01
mpi_raid.h 01.05.05 01.05.05
mpi_tool.h 01.05.03 01.05.03
mpi_inb.h 01.05.01 01.05.01
mpi_sas.h 01.05.05 01.05.05
mpi_type.h 01.05.02 01.05.02
mpi_history.txt 01.05.19 01.05.18
* Date Version Description
* -------- -------- ------------------------------------------------------
mpi.h
* 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
* 05-24-00 00.10.02 Added MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH definition.
* 06-06-00 01.00.01 Update MPI_VERSION_MAJOR and MPI_VERSION_MINOR.
* 06-22-00 01.00.02 Added MPI_IOCSTATUS_LAN_ definitions.
* Removed LAN_SUSPEND function definition.
* Added MPI_MSGFLAGS_CONTINUATION_REPLY definition.
* 06-30-00 01.00.03 Added MPI_CONTEXT_REPLY_TYPE_LAN definition.
* Added MPI_GET/SET_CONTEXT_REPLY_TYPE macros.
* 07-27-00 01.00.04 Added MPI_FAULT_ definitions.
* Removed MPI_IOCSTATUS_MSG/DATA_XFER_ERROR definitions.
* Added MPI_IOCSTATUS_INTERNAL_ERROR definition.
* Added MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH.
* 11-02-00 01.01.01 Original release for post 1.0 work
* 12-04-00 01.01.02 Added new function codes.
* 01-09-01 01.01.03 Added more definitions to the system interface section
* Added MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT.
* 01-25-01 01.01.04 Changed MPI_VERSION_MINOR from 0x00 to 0x01.
* 02-20-01 01.01.05 Started using MPI_POINTER.
* Added defines for MPI_DIAG_PREVENT_IOC_BOOT and
* MPI_DIAG_CLEAR_FLASH_BAD_SIG.
* Obsoleted MPI_IOCSTATUS_TARGET_FC_ defines.
* 02-27-01 01.01.06 Removed MPI_HOST_INDEX_REGISTER define.
* Added function codes for RAID.
* 04-09-01 01.01.07 Added alternate define for MPI_DOORBELL_ACTIVE,
* MPI_DOORBELL_USED, to better match the spec.
* 08-08-01 01.02.01 Original release for v1.2 work.
* Changed MPI_VERSION_MINOR from 0x01 to 0x02.
* Added define MPI_FUNCTION_TOOLBOX.
* 09-28-01 01.02.02 New function code MPI_SCSI_ENCLOSURE_PROCESSOR.
* 11-01-01 01.02.03 Changed name to MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR.
* 03-14-02 01.02.04 Added MPI_HEADER_VERSION_ defines.
* 05-31-02 01.02.05 Bumped MPI_HEADER_VERSION_UNIT.
* 07-12-02 01.02.06 Added define for MPI_FUNCTION_MAILBOX.
* 09-16-02 01.02.07 Bumped value for MPI_HEADER_VERSION_UNIT.
* 11-15-02 01.02.08 Added define MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX and
* obsoleted define MPI_IOCSTATUS_TARGET_INVALID_IOCINDEX.
* 04-01-03 01.02.09 New IOCStatus code: MPI_IOCSTATUS_FC_EXCHANGE_CANCELED
* 06-26-03 01.02.10 Bumped MPI_HEADER_VERSION_UNIT value.
* 01-16-04 01.02.11 Added define for MPI_IOCLOGINFO_TYPE_SHIFT.
* 04-29-04 01.02.12 Added function codes for MPI_FUNCTION_DIAG_BUFFER_POST
* and MPI_FUNCTION_DIAG_RELEASE.
* Added MPI_IOCSTATUS_DIAGNOSTIC_RELEASED define.
* Bumped MPI_HEADER_VERSION_UNIT value.
* 05-11-04 01.03.01 Bumped MPI_VERSION_MINOR for MPI v1.3.
* Added codes for Inband.
* 08-19-04 01.05.01 Added defines for Host Buffer Access Control doorbell.
* Added define for offset of High Priority Request Queue.
* Added new function codes and new IOCStatus codes.
* Added a IOCLogInfo type of SAS.
* 12-07-04 01.05.02 Bumped MPI_HEADER_VERSION_UNIT.
* 12-09-04 01.05.03 Bumped MPI_HEADER_VERSION_UNIT.
* 01-15-05 01.05.04 Bumped MPI_HEADER_VERSION_UNIT.
* 02-09-05 01.05.05 Bumped MPI_HEADER_VERSION_UNIT.
* 02-22-05 01.05.06 Bumped MPI_HEADER_VERSION_UNIT.
* 03-11-05 01.05.07 Removed function codes for SCSI IO 32 and
* TargetAssistExtended requests.
* Removed EEDP IOCStatus codes.
* 06-24-05 01.05.08 Added function codes for SCSI IO 32 and
* TargetAssistExtended requests.
* Added EEDP IOCStatus codes.
* 08-03-05 01.05.09 Bumped MPI_HEADER_VERSION_UNIT.
* 08-30-05 01.05.10 Added 2 new IOCStatus codes for Target.
* 03-27-06 01.05.11 Bumped MPI_HEADER_VERSION_UNIT.
* 10-11-06 01.05.12 Bumped MPI_HEADER_VERSION_UNIT.
* 05-24-07 01.05.13 Bumped MPI_HEADER_VERSION_UNIT.
* 08-07-07 01.05.14 Bumped MPI_HEADER_VERSION_UNIT.
* 01-15-08 01.05.15 Bumped MPI_HEADER_VERSION_UNIT.
* 03-28-08 01.05.16 Bumped MPI_HEADER_VERSION_UNIT.
* --------------------------------------------------------------------------
mpi_ioc.h
* 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
* 05-24-00 00.10.02 Added _MSG_IOC_INIT_REPLY structure.
* 06-06-00 01.00.01 Added CurReplyFrameSize field to _MSG_IOC_FACTS_REPLY.
* 06-12-00 01.00.02 Added _MSG_PORT_ENABLE_REPLY structure.
* Added _MSG_EVENT_ACK_REPLY structure.
* Added _MSG_FW_DOWNLOAD_REPLY structure.
* Added _MSG_TOOLBOX_REPLY structure.
* 06-30-00 01.00.03 Added MaxLanBuckets to _PORT_FACT_REPLY structure.
* 07-27-00 01.00.04 Added _EVENT_DATA structure definitions for _SCSI,
* _LINK_STATUS, _LOOP_STATE and _LOGOUT.
* 08-11-00 01.00.05 Switched positions of MsgLength and Function fields in
* _MSG_EVENT_ACK_REPLY structure to match specification.
* 11-02-00 01.01.01 Original release for post 1.0 work
* Added a value for Manufacturer to WhoInit
* 12-04-00 01.01.02 Modified IOCFacts reply, added FWUpload messages, and
* removed toolbox message.
* 01-09-01 01.01.03 Added event enabled and disabled defines.
* Added structures for FwHeader and DataHeader.
* Added ImageType to FwUpload reply.
* 02-20-01 01.01.04 Started using MPI_POINTER.
* 02-27-01 01.01.05 Added event for RAID status change and its event data.
* Added IocNumber field to MSG_IOC_FACTS_REPLY.
* 03-27-01 01.01.06 Added defines for ProductId field of MPI_FW_HEADER.
* Added structure offset comments.
* 04-09-01 01.01.07 Added structure EVENT_DATA_EVENT_CHANGE.
* 08-08-01 01.02.01 Original release for v1.2 work.
* New format for FWVersion and ProductId in
* MSG_IOC_FACTS_REPLY and MPI_FW_HEADER.
* 08-31-01 01.02.02 Added event MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE and
* related structure and defines.
* Added event MPI_EVENT_ON_BUS_TIMER_EXPIRED.
* Added MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE.
* Replaced a reserved field in MSG_IOC_FACTS_REPLY with
* IOCExceptions and changed DataImageSize to reserved.
* Added MPI_FW_DOWNLOAD_ITYPE_NVSTORE_DATA and
* MPI_FW_UPLOAD_ITYPE_NVDATA.
* 09-28-01 01.02.03 Modified Event Data for Integrated RAID.
* 11-01-01 01.02.04 Added defines for MPI_EXT_IMAGE_HEADER ImageType field.
* 03-14-02 01.02.05 Added HeaderVersion field to MSG_IOC_FACTS_REPLY.
* 05-31-02 01.02.06 Added define for
* MPI_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID.
* Added AliasIndex to EVENT_DATA_LOGOUT structure.
* 04-01-03 01.02.07 Added defines for MPI_FW_HEADER_SIGNATURE_.
* 06-26-03 01.02.08 Added new values to the product family defines.
* 04-29-04 01.02.09 Added IOCCapabilities field to MSG_IOC_FACTS_REPLY and
* added related defines.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Added four new fields to MSG_IOC_INIT.
* Added three new fields to MSG_IOC_FACTS_REPLY.
* Defined four new bits for the IOCCapabilities field of
* the IOCFacts reply.
* Added two new PortTypes for the PortFacts reply.
* Added six new events along with their EventData
* structures.
* Added a new MsgFlag to the FwDownload request to
* indicate last segment.
* Defined a new image type of boot loader.
* Added FW family codes for SAS product families.
* 10-05-04 01.05.02 Added ReplyFifoHostSignalingAddr field to
* MSG_IOC_FACTS_REPLY.
* 12-07-04 01.05.03 Added more defines for SAS Discovery Error event.
* 12-09-04 01.05.04 Added Unsupported device to SAS Device event.
* 01-15-05 01.05.05 Added event data for SAS SES Event.
* 02-09-05 01.05.06 Added MPI_FW_UPLOAD_ITYPE_FW_BACKUP define.
* 02-22-05 01.05.07 Added Host Page Buffer Persistent flag to IOC Facts
* Reply and IOC Init Request.
* 03-11-05 01.05.08 Added family code for 1068E family.
* Removed IOCFacts Reply EEDP Capability bit.
* 06-24-05 01.05.09 Added 5 new IOCFacts Reply IOCCapabilities bits.
* Added Max SATA Targets to SAS Discovery Error event.
* 08-30-05 01.05.10 Added 4 new events and their event data structures.
* Added new ReasonCode value for SAS Device Status Change
* event.
* Added new family code for FC949E.
* 03-27-06 01.05.11 Added MPI_IOCFACTS_CAPABILITY_TLR.
* Added additional Reason Codes and more event data fields
* to EVENT_DATA_SAS_DEVICE_STATUS_CHANGE.
* Added EVENT_DATA_SAS_BROADCAST_PRIMITIVE structure and
* new event.
* Added MPI_EVENT_SAS_SMP_ERROR and event data structure.
* Added MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE and event
* data structure.
* Added MPI_EVENT_SAS_INIT_TABLE_OVERFLOW and event
* data structure.
* Added MPI_EXT_IMAGE_TYPE_INITIALIZATION.
* 10-11-06 01.05.12 Added MPI_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED.
* Added MaxInitiators field to PortFacts reply.
* Added SAS Device Status Change ReasonCode for
* asynchronous notification.
* Added MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE and event
* data structure.
* Added new ImageType values for FWDownload and FWUpload
* requests.
* 02-28-07 01.05.13 Added MPI_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT for SAS
* Broadcast Event Data (replacing _RESERVED2).
* For Discovery Error Event Data DiscoveryStatus field,
* replaced _MULTPL_PATHS with _UNSUPPORTED_DEVICE and
* added _MULTI_PORT_DOMAIN.
* 05-24-07 01.05.14 Added Common Boot Block type to FWDownload Request.
* Added Common Boot Block type to FWUpload Request.
* 08-07-07 01.05.15 Added MPI_EVENT_SAS_INIT_RC_REMOVED define.
* Added MPI_EVENT_IR2_RC_DUAL_PORT_ADDED and
* MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED for IR2 event data.
* Added SASAddress field to SAS Initiator Device Table
* Overflow event data structure.
* 03-28-08 01.05.16 Added two new ReasonCode values to SAS Device Status
* Change Event data to indicate completion of internally
* generated task management.
* Added MPI_EVENT_DSCVRY_ERR_DS_SATA_INIT_FAILURE define.
* Added MPI_EVENT_SAS_INIT_RC_INACCESSIBLE define.
* --------------------------------------------------------------------------
mpi_cnfg.h
* 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
* 06-06-00 01.00.01 Update version number for 1.0 release.
* 06-08-00 01.00.02 Added _PAGEVERSION definitions for all pages.
* Added FcPhLowestVersion, FcPhHighestVersion, Reserved2
* fields to FC_DEVICE_0 page, updated the page version.
* Changed _FREE_RUNNING_CLOCK to _PACING_TRANSFERS in
* SCSI_PORT_0, SCSI_DEVICE_0 and SCSI_DEVICE_1 pages
* and updated the page versions.
* Added _RESPONSE_ID_MASK definition to SCSI_PORT_1
* page and updated the page version.
* Added Information field and _INFO_PARAMS_NEGOTIATED
* definitionto SCSI_DEVICE_0 page.
* 06-22-00 01.00.03 Removed batch controls from LAN_0 page and updated the
* page version.
* Added BucketsRemaining to LAN_1 page, redefined the
* state values, and updated the page version.
* Revised bus width definitions in SCSI_PORT_0,
* SCSI_DEVICE_0 and SCSI_DEVICE_1 pages.
* 06-30-00 01.00.04 Added MaxReplySize to LAN_1 page and updated the page
* version.
* Moved FC_DEVICE_0 PageAddress description to spec.
* 07-27-00 01.00.05 Corrected the SubsystemVendorID and SubsystemID field
* widths in IOC_0 page and updated the page version.
* 11-02-00 01.01.01 Original release for post 1.0 work
* Added Manufacturing pages, IO Unit Page 2, SCSI SPI
* Port Page 2, FC Port Page 4, FC Port Page 5
* 12-04-00 01.01.03 Config page changes to match MPI rev 1.00.01.
* 12-05-00 01.01.04 Modified config page actions.
* 01-09-01 01.01.05 Added defines for page address formats.
* Data size for Manufacturing pages 2 and 3 no longer
* defined here.
* Io Unit Page 2 size is fixed at 4 adapters and some
* flags were changed.
* SCSI Port Page 2 Device Settings modified.
* New fields added to FC Port Page 0 and some flags
* cleaned up.
* Removed impedance flash from FC Port Page 1.
* Added FC Port pages 6 and 7.
* 01-25-01 01.01.06 Added MaxInitiators field to FcPortPage0.
* 01-29-01 01.01.07 Changed some defines to make them 32 character unique.
* Added some LinkType defines for FcPortPage0.
* 02-20-01 01.01.08 Started using MPI_POINTER.
* 02-27-01 01.01.09 Replaced MPI_CONFIG_PAGETYPE_SCSI_LUN with
* MPI_CONFIG_PAGETYPE_RAID_VOLUME.
* Added definitions and structures for IOC Page 2 and
* RAID Volume Page 2.
* 03-27-01 01.01.10 Added CONFIG_PAGE_FC_PORT_8 and CONFIG_PAGE_FC_PORT_9.
* CONFIG_PAGE_FC_PORT_3 now supports persistent by DID.
* Added VendorId and ProductRevLevel fields to
* RAIDVOL2_IM_PHYS_ID struct.
* Modified values for MPI_FCPORTPAGE0_FLAGS_ATTACH_
* defines to make them compatible to MPI version 1.0.
* Added structure offset comments.
* 04-09-01 01.01.11 Added some new defines for the PageAddress field and
* removed some obsolete ones.
* Added IO Unit Page 3.
* Modified defines for Scsi Port Page 2.
* Modified RAID Volume Pages.
* 08-08-01 01.02.01 Original release for v1.2 work.
* Added SepID and SepBus to RVP2 IMPhysicalDisk struct.
* Added defines for the SEP bits in RVP2 VolumeSettings.
* Modified the DeviceSettings field in RVP2 to use the
* proper structure.
* Added defines for SES, SAF-TE, and cross channel for
* IOCPage2 CapabilitiesFlags.
* Removed define for MPI_IOUNITPAGE2_FLAGS_RAID_DISABLE.
* Removed define for
* MPI_SCSIPORTPAGE2_PORT_FLAGS_PARITY_ENABLE.
* Added define for MPI_CONFIG_PAGEATTR_RO_PERSISTENT.
* 08-29-01 01.02.02 Fixed value for MPI_MANUFACTPAGE_DEVID_53C1035.
* Added defines for MPI_FCPORTPAGE1_FLAGS_HARD_ALPA_ONLY
* and MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY.
* Removed MPI_SCSIPORTPAGE0_CAP_PACING_TRANSFERS,
* MPI_SCSIDEVPAGE0_NP_PACING_TRANSFERS, and
* MPI_SCSIDEVPAGE1_RP_PACING_TRANSFERS, and
* MPI_SCSIDEVPAGE1_CONF_PPR_ALLOWED.
* Added defines for MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED
* and MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED.
* Added OnBusTimerValue to CONFIG_PAGE_SCSI_PORT_1.
* Added rejected bits to SCSI Device Page 0 Information.
* Increased size of ALPA array in FC Port Page 2 by one
* and removed a one byte reserved field.
* 09-28-01 01.02.03 Swapped NegWireSpeedLow and NegWireSpeedLow in
* CONFIG_PAGE_LAN_1 to match preferred 64-bit ordering.
* Added structures for Manufacturing Page 4, IO Unit
* Page 3, IOC Page 3, IOC Page 4, RAID Volume Page 0, and
* RAID PhysDisk Page 0.
* 10-04-01 01.02.04 Added define for MPI_CONFIG_PAGETYPE_RAID_PHYSDISK.
* Modified some of the new defines to make them 32
* character unique.
* Modified how variable length pages (arrays) are defined.
* Added generic defines for hot spare pools and RAID
* volume types.
* 11-01-01 01.02.05 Added define for MPI_IOUNITPAGE1_DISABLE_IR.
* 03-14-02 01.02.06 Added PCISlotNum field to CONFIG_PAGE_IOC_1 along with
* related define, and bumped the page version define.
* 05-31-02 01.02.07 Added a Flags field to CONFIG_PAGE_IOC_2_RAID_VOL in a
* reserved byte and added a define.
* Added define for
* MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE.
* Added new config page: CONFIG_PAGE_IOC_5.
* Added MaxAliases, MaxHardAliases, and NumCurrentAliases
* fields to CONFIG_PAGE_FC_PORT_0.
* Added AltConnector and NumRequestedAliases fields to
* CONFIG_PAGE_FC_PORT_1.
* Added new config page: CONFIG_PAGE_FC_PORT_10.
* 07-12-02 01.02.08 Added more MPI_MANUFACTPAGE_DEVID_ defines.
* Added additional MPI_SCSIDEVPAGE0_NP_ defines.
* Added more MPI_SCSIDEVPAGE1_RP_ defines.
* Added define for
* MPI_SCSIDEVPAGE1_CONF_EXTENDED_PARAMS_ENABLE.
* Added new config page: CONFIG_PAGE_SCSI_DEVICE_3.
* Modified MPI_FCPORTPAGE5_FLAGS_ defines.
* 09-16-02 01.02.09 Added MPI_SCSIDEVPAGE1_CONF_FORCE_PPR_MSG define.
* 11-15-02 01.02.10 Added ConnectedID defines for CONFIG_PAGE_SCSI_PORT_0.
* Added more Flags defines for CONFIG_PAGE_FC_PORT_1.
* Added more Flags defines for CONFIG_PAGE_FC_DEVICE_0.
* 04-01-03 01.02.11 Added RR_TOV field and additional Flags defines for
* CONFIG_PAGE_FC_PORT_1.
* Added define MPI_FCPORTPAGE5_FLAGS_DISABLE to disable
* an alias.
* Added more device id defines.
* 06-26-03 01.02.12 Added MPI_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID define.
* Added TargetConfig and IDConfig fields to
* CONFIG_PAGE_SCSI_PORT_1.
* Added more PortFlags defines for CONFIG_PAGE_SCSI_PORT_2
* to control DV.
* Added more Flags defines for CONFIG_PAGE_FC_PORT_1.
* In CONFIG_PAGE_FC_DEVICE_0, replaced Reserved1 field
* with ADISCHardALPA.
* Added MPI_FC_DEVICE_PAGE0_PROT_FCP_RETRY define.
* 01-16-04 01.02.13 Added InitiatorDeviceTimeout and InitiatorIoPendTimeout
* fields and related defines to CONFIG_PAGE_FC_PORT_1.
* Added define for
* MPI_FCPORTPAGE1_FLAGS_SOFT_ALPA_FALLBACK.
* Added new fields to the substructures of
* CONFIG_PAGE_FC_PORT_10.
* 04-29-04 01.02.14 Added define for IDP bit for CONFIG_PAGE_SCSI_PORT_0,
* CONFIG_PAGE_SCSI_DEVICE_0, and
* CONFIG_PAGE_SCSI_DEVICE_1. Also bumped Page Version for
* these pages.
* 05-11-04 01.03.01 Added structure for CONFIG_PAGE_INBAND_0.
* 08-19-04 01.05.01 Modified MSG_CONFIG request to support extended config
* pages.
* Added a new structure for extended config page header.
* Added new extended config pages types and structures for
* SAS IO Unit, SAS Expander, SAS Device, and SAS PHY.
* Replaced a reserved byte in CONFIG_PAGE_MANUFACTURING_4
* to add a Flags field.
* Two new Manufacturing config pages (5 and 6).
* Two new bits defined for IO Unit Page 1 Flags field.
* Modified CONFIG_PAGE_IO_UNIT_2 to add three new fields
* to specify the BIOS boot device.
* Four new Flags bits defined for IO Unit Page 2.
* Added IO Unit Page 4.
* Added EEDP Flags settings to IOC Page 1.
* Added new BIOS Page 1 config page.
* 10-05-04 01.05.02 Added define for
* MPI_IOCPAGE1_INITIATOR_CONTEXT_REPLY_DISABLE.
* Added new Flags field to CONFIG_PAGE_MANUFACTURING_5 and
* associated defines.
* Added more defines for SAS IO Unit Page 0
* DiscoveryStatus field.
* Added define for MPI_SAS_IOUNIT0_DS_SUBTRACTIVE_LINK
* and MPI_SAS_IOUNIT0_DS_TABLE_LINK.
* Added defines for Physical Mapping Modes to SAS IO Unit
* Page 2.
* Added define for
* MPI_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH.
* 10-27-04 01.05.03 Added defines for new SAS PHY page addressing mode.
* Added defines for MaxTargetSpinUp to BIOS Page 1.
* Added 5 new ControlFlags defines for SAS IO Unit
* Page 1.
* Added MaxNumPhysicalMappedIDs field to SAS IO Unit
* Page 2.
* Added AccessStatus field to SAS Device Page 0 and added
* new Flags bits for supported SATA features.
* 12-07-04 01.05.04 Added config page structures for BIOS Page 2, RAID
* Volume Page 1, and RAID Physical Disk Page 1.
* Replaced IO Unit Page 1 BootTargetID,BootBus, and
* BootAdapterNum with reserved field.
* Added DataScrubRate and ResyncRate to RAID Volume
* Page 0.
* Added MPI_SAS_IOUNIT2_FLAGS_RESERVE_ID_0_FOR_BOOT
* define.
* 12-09-04 01.05.05 Added Target Mode Large CDB Enable to FC Port Page 1
* Flags field.
* Added Auto Port Config flag define for SAS IOUNIT
* Page 1 ControlFlags.
* Added Disabled bad Phy define to Expander Page 1
* Discovery Info field.
* Added SAS/SATA device support to SAS IOUnit Page 1
* ControlFlags.
* Added Unsupported device to SAS Dev Page 0 Flags field
* Added disable use SATA Hash Address for SAS IOUNIT
* page 1 in ControlFields.
* 01-15-05 01.05.06 Added defaults for data scrub rate and resync rate to
* Manufacturing Page 4.
* Added new defines for BIOS Page 1 IOCSettings field.
* Added ExtDiskIdentifier field to RAID Physical Disk
* Page 0.
* Added new defines for SAS IO Unit Page 1 ControlFlags
* and to SAS Device Page 0 Flags to control SATA devices.
* Added defines and structures for the new Log Page 0, a
* new type of configuration page.
* 02-09-05 01.05.07 Added InactiveStatus field to RAID Volume Page 0.
* Added WWID field to RAID Volume Page 1.
* Added PhysicalPort field to SAS Expander pages 0 and 1.
* 03-11-05 01.05.08 Removed the EEDP flags from IOC Page 1.
* Added Enclosure/Slot boot device format to BIOS Page 2.
* New status value for RAID Volume Page 0 VolumeStatus
* (VolumeState subfield).
* New value for RAID Physical Page 0 InactiveStatus.
* Added Inactive Volume Member flag RAID Physical Disk
* Page 0 PhysDiskStatus field.
* New physical mapping mode in SAS IO Unit Page 2.
* Added CONFIG_PAGE_SAS_ENCLOSURE_0.
* Added Slot and Enclosure fields to SAS Device Page 0.
* 06-24-05 01.05.09 Added EEDP defines to IOC Page 1.
* Added more RAID type defines to IOC Page 2.
* Added Port Enable Delay settings to BIOS Page 1.
* Added Bad Block Table Full define to RAID Volume Page 0.
* Added Previous State defines to RAID Physical Disk
* Page 0.
* Added Max Sata Targets define for DiscoveryStatus field
* of SAS IO Unit Page 0.
* Added Device Self Test to Control Flags of SAS IO Unit
* Page 1.
* Added Direct Attach Starting Slot Number define for SAS
* IO Unit Page 2.
* Added new fields in SAS Device Page 2 for enclosure
* mapping.
* Added OwnerDevHandle and Flags field to SAS PHY Page 0.
* Added IOC GPIO Flags define to SAS Enclosure Page 0.
* Fixed the value for MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT.
* 08-03-05 01.05.10 Removed ISDataScrubRate and ISResyncRate from
* Manufacturing Page 4.
* Added MPI_IOUNITPAGE1_SATA_WRITE_CACHE_DISABLE bit.
* Added NumDevsPerEnclosure field to SAS IO Unit page 2.
* Added MPI_SAS_IOUNIT2_FLAGS_HOST_ASSIGNED_PHYS_MAP
* define.
* Added EnclosureHandle field to SAS Expander page 0.
* Removed redundant NumTableEntriesProg field from SAS
* Expander Page 1.
* 08-30-05 01.05.11 Added DeviceID for FC949E and changed the DeviceID for
* SAS1078.
* Added more defines for Manufacturing Page 4 Flags field.
* Added more defines for IOCSettings and added
* ExpanderSpinup field to Bios Page 1.
* Added postpone SATA Init bit to SAS IO Unit Page 1
* ControlFlags.
* Changed LogEntry format for Log Page 0.
* 03-27-06 01.05.12 Added two new Flags defines for Manufacturing Page 4.
* Added Manufacturing Page 7.
* Added MPI_IOCPAGE2_CAP_FLAGS_RAID_64_BIT_ADDRESSING.
* Added IOC Page 6.
* Added PrevBootDeviceForm field to CONFIG_PAGE_BIOS_2.
* Added MaxLBAHigh field to RAID Volume Page 0.
* Added Nvdata version fields to SAS IO Unit Page 0.
* Added AdditionalControlFlags, MaxTargetPortConnectTime,
* ReportDeviceMissingDelay, and IODeviceMissingDelay
* fields to SAS IO Unit Page 1.
* 10-11-06 01.05.13 Added NumForceWWID field and ForceWWID array to
* Manufacturing Page 5.
* Added Manufacturing pages 8 through 10.
* Added defines for supported metadata size bits in
* CapabilitiesFlags field of IOC Page 6.
* Added defines for metadata size bits in VolumeSettings
* field of RAID Volume Page 0.
* Added SATA Link Reset settings, Enable SATA Asynchronous
* Notification bit, and HideNonZeroAttachedPhyIdentifiers
* bit to AdditionalControlFlags field of SAS IO Unit
* Page 1.
* Added defines for Enclosure Devices Unmapped and
* Device Limit Exceeded bits in Status field of SAS IO
* Unit Page 2.
* Added more AccessStatus values for SAS Device Page 0.
* Added bit for SATA Asynchronous Notification Support in
* Flags field of SAS Device Page 0.
* 02-28-07 01.05.14 Added ExtFlags field to Manufacturing Page 4.
* Added Disable SMART Polling for CapabilitiesFlags of
* IOC Page 6.
* Added Disable SMART Polling to DeviceSettings of BIOS
* Page 1.
* Added Multi-Port Domain bit for DiscoveryStatus field
* of SAS IO Unit Page.
* Added Multi-Port Domain Illegal flag for SAS IO Unit
* Page 1 AdditionalControlFlags field.
* 05-24-07 01.05.15 Added Hide Physical Disks with Non-Integrated RAID
* Metadata bit to Manufacturing Page 4 ExtFlags field.
* Added Internal Connector to End Device Present bit to
* Expander Page 0 Flags field.
* Fixed define for
* MPI_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED.
* 08-07-07 01.05.16 Added MPI_IOCPAGE6_CAP_FLAGS_MULTIPORT_DRIVE_SUPPORT
* define.
* Added BIOS Page 4 structure.
* Added MPI_RAID_PHYS_DISK1_PATH_MAX define for RAID
* Physcial Disk Page 1.
* 01-15-07 01.05.17 Added additional bit defines for ExtFlags field of
* Manufacturing Page 4.
* Added Solid State Drives Supported bit to IOC Page 6
* Capabilities Flags.
* Added new value for AccessStatus field of SAS Device
* Page 0 (_SATA_NEEDS_INITIALIZATION).
* 03-28-08 01.05.18 Defined new bits in Manufacturing Page 4 ExtFlags field
* to control coercion size and the mixing of SAS and SATA
* SSD drives.
* --------------------------------------------------------------------------
mpi_init.h
* 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
* 05-24-00 00.10.02 Added SenseBufferLength to _MSG_SCSI_IO_REPLY.
* 06-06-00 01.00.01 Update version number for 1.0 release.
* 06-08-00 01.00.02 Added MPI_SCSI_RSP_INFO_ definitions.
* 11-02-00 01.01.01 Original release for post 1.0 work
* 12-04-00 01.01.02 Added MPI_SCSIIO_CONTROL_NO_DISCONNECT.
* 02-20-01 01.01.03 Started using MPI_POINTER.
* 03-27-01 01.01.04 Added structure offset comments.
* 04-10-01 01.01.05 Added new MsgFlag for MSG_SCSI_TASK_MGMT.
* 08-08-01 01.02.01 Original release for v1.2 work.
* 08-29-01 01.02.02 Added MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET.
* Added MPI_SCSI_STATE_QUEUE_TAG_REJECTED for
* MSG_SCSI_IO_REPLY.
* 09-28-01 01.02.03 Added structures and defines for SCSI Enclosure
* Processor messages.
* 10-04-01 01.02.04 Added defines for SEP request Action field.
* 05-31-02 01.02.05 Added MPI_SCSIIO_MSGFLGS_CMD_DETERMINES_DATA_DIR define
* for SCSI IO requests.
* 11-15-02 01.02.06 Added special extended SCSI Status defines for FCP.
* 06-26-03 01.02.07 Added MPI_SCSI_STATUS_FCPEXT_UNASSIGNED define.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Added MsgFlags defines for EEDP to SCSI IO request.
* Added new word to MSG_SCSI_IO_REPLY to add TaskTag field
* and a reserved U16.
* Added new MSG_SCSI_IO32_REQUEST structure.
* Added a TaskType of Clear Task Set to SCSI
* Task Management request.
* 12-07-04 01.05.02 Added support for Task Management Query Task.
* 01-15-05 01.05.03 Modified SCSI Enclosure Processor Request to support
* WWID addressing.
* 03-11-05 01.05.04 Removed EEDP flags from SCSI IO Request.
* Removed SCSI IO 32 Request.
* Modified SCSI Enclosure Processor Request and Reply to
* support Enclosure/Slot addressing rather than WWID
* addressing.
* 06-24-05 01.05.05 Added SCSI IO 32 structures and defines.
* Added four new defines for SEP SlotStatus.
* 08-03-05 01.05.06 Fixed some MPI_SCSIIO32_MSGFLGS_ defines to make them
* unique in the first 32 characters.
* 03-27-06 01.05.07 Added Task Management type of Clear ACA.
* 10-11-06 01.05.08 Shortened define for Task Management type of Clear ACA.
* 02-28-07 01.05.09 Defined two new MsgFlags bits for SCSI Task Management
* Request: Do Not Send Task IU and Soft Reset Option.
* --------------------------------------------------------------------------
mpi_targ.h
* 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
* 06-06-00 01.00.01 Update version number for 1.0 release.
* 06-22-00 01.00.02 Added _MSG_TARGET_CMD_BUFFER_POST_REPLY structure.
* Corrected DECSRIPTOR typo to DESCRIPTOR.
* 11-02-00 01.01.01 Original release for post 1.0 work
* Modified target mode to use IoIndex instead of
* HostIndex and IocIndex. Added Alias.
* 01-09-01 01.01.02 Added defines for TARGET_ASSIST_FLAGS_REPOST_CMD_BUFFER
* and TARGET_STATUS_SEND_FLAGS_REPOST_CMD_BUFFER.
* 02-20-01 01.01.03 Started using MPI_POINTER.
* Added structures for MPI_TARGET_SCSI_SPI_CMD_BUFFER and
* MPI_TARGET_FCP_CMD_BUFFER.
* 03-27-01 01.01.04 Added structure offset comments.
* 08-08-01 01.02.01 Original release for v1.2 work.
* 09-28-01 01.02.02 Added structure for MPI_TARGET_SCSI_SPI_STATUS_IU.
* Added PriorityReason field to some replies and
* defined more PriorityReason codes.
* Added some defines for to support previous version
* of MPI.
* 10-04-01 01.02.03 Added PriorityReason to MSG_TARGET_ERROR_REPLY.
* 11-01-01 01.02.04 Added define for TARGET_STATUS_SEND_FLAGS_HIGH_PRIORITY.
* 03-14-02 01.02.05 Modified MPI_TARGET_FCP_RSP_BUFFER to get the proper
* byte ordering.
* 05-31-02 01.02.06 Modified TARGET_MODE_REPLY_ALIAS_MASK to only include
* one bit.
* Added AliasIndex field to MPI_TARGET_FCP_CMD_BUFFER.
* 09-16-02 01.02.07 Added flags for confirmed completion.
* Added PRIORITY_REASON_TARGET_BUSY.
* 11-15-02 01.02.08 Added AliasID field to MPI_TARGET_SCSI_SPI_CMD_BUFFER.
* 04-01-03 01.02.09 Added OptionalOxid field to MPI_TARGET_FCP_CMD_BUFFER.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Added new request message structures for
* MSG_TARGET_CMD_BUF_POST_BASE_REQUEST,
* MSG_TARGET_CMD_BUF_POST_LIST_REQUEST, and
* MSG_TARGET_ASSIST_EXT_REQUEST.
* Added new structures for SAS SSP Command buffer, SSP
* Task buffer, and SSP Status IU.
* 10-05-04 01.05.02 MSG_TARGET_CMD_BUFFER_POST_BASE_LIST_REPLY added.
* 02-22-05 01.05.03 Changed a comment.
* 03-11-05 01.05.04 Removed TargetAssistExtended Request.
* 06-24-05 01.05.05 Added TargetAssistExtended structures and defines.
* 03-27-06 01.05.06 Added a comment.
* --------------------------------------------------------------------------
mpi_fc.h
* 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
* 06-06-00 01.00.01 Update version number for 1.0 release.
* 06-12-00 01.00.02 Added _MSG_FC_ABORT_REPLY structure.
* 11-02-00 01.01.01 Original release for post 1.0 work
* 12-04-00 01.01.02 Added messages for Common Transport Send and
* Primitive Send.
* 01-09-01 01.01.03 Modified some of the new flags to have an MPI prefix
* and modified the FcPrimitiveSend flags.
* 01-25-01 01.01.04 Move InitiatorIndex in LinkServiceRsp reply to a larger
* field.
* Added FC_ABORT_TYPE_CT_SEND_REQUEST and
* FC_ABORT_TYPE_EXLINKSEND_REQUEST for FcAbort request.
* Added MPI_FC_PRIM_SEND_FLAGS_STOP_SEND.
* 02-20-01 01.01.05 Started using MPI_POINTER.
* 03-27-01 01.01.06 Added Flags field to MSG_LINK_SERVICE_BUFFER_POST_REPLY
* and defined MPI_LS_BUF_POST_REPLY_FLAG_NO_RSP_NEEDED.
* Added MPI_FC_PRIM_SEND_FLAGS_RESET_LINK define.
* Added structure offset comments.
* 04-09-01 01.01.07 Added RspLength field to MSG_LINK_SERVICE_RSP_REQUEST.
* 08-08-01 01.02.01 Original release for v1.2 work.
* 09-28-01 01.02.02 Change name of reserved field in
* MSG_LINK_SERVICE_RSP_REPLY.
* 05-31-02 01.02.03 Adding AliasIndex to FC Direct Access requests.
* 01-16-04 01.02.04 Added define for MPI_FC_PRIM_SEND_FLAGS_ML_RESET_LINK.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Original release for MPI v1.5.
* --------------------------------------------------------------------------
mpi_lan.h
* 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
* 05-24-00 00.10.02 Added LANStatus field to _MSG_LAN_SEND_REPLY.
* Added LANStatus field to _MSG_LAN_RECEIVE_POST_REPLY.
* Moved ListCount field in _MSG_LAN_RECEIVE_POST_REPLY.
* 06-06-00 01.00.01 Update version number for 1.0 release.
* 06-12-00 01.00.02 Added MPI_ to BUCKETSTATUS_ definitions.
* 06-22-00 01.00.03 Major changes to match new LAN definition in 1.0 spec.
* 06-30-00 01.00.04 Added Context Reply definitions per revised proposal.
* Changed transaction context usage to bucket/buffer.
* 07-05-00 01.00.05 Removed LAN_RECEIVE_POST_BUCKET_CONTEXT_MASK definition
* to lan private header file
* 11-02-00 01.01.01 Original release for post 1.0 work
* 02-20-01 01.01.02 Started using MPI_POINTER.
* 03-27-01 01.01.03 Added structure offset comments.
* 08-08-01 01.02.01 Original release for v1.2 work.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Original release for MPI v1.5.
* --------------------------------------------------------------------------
mpi_raid.h
* 02-27-01 01.01.01 Original release for this file.
* 03-27-01 01.01.02 Added structure offset comments.
* 08-08-01 01.02.01 Original release for v1.2 work.
* 08-29-01 01.02.02 Added DIAG_DATA_UPLOAD_HEADER and related defines.
* 09-28-01 01.02.02 Major rework for MPI v1.2 Integrated RAID changes.
* 10-04-01 01.02.03 Added ActionData defines for
* MPI_RAID_ACTION_DELETE_VOLUME action.
* 11-01-01 01.02.04 Added define for MPI_RAID_ACTION_ADATA_DO_NOT_SYNC.
* 03-14-02 01.02.05 Added define for MPI_RAID_ACTION_ADATA_LOW_LEVEL_INIT.
* 05-07-02 01.02.06 Added define for MPI_RAID_ACTION_ACTIVATE_VOLUME,
* MPI_RAID_ACTION_INACTIVATE_VOLUME, and
* MPI_RAID_ACTION_ADATA_INACTIVATE_ALL.
* 07-12-02 01.02.07 Added structures for Mailbox request and reply.
* 11-15-02 01.02.08 Added missing MsgContext field to MSG_MAILBOX_REQUEST.
* 04-01-03 01.02.09 New action data option flag for
* MPI_RAID_ACTION_DELETE_VOLUME.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Original release for MPI v1.5.
* 01-15-05 01.05.02 Added defines for the two new RAID Actions for
* _SET_RESYNC_RATE and _SET_DATA_SCRUB_RATE.
* 02-28-07 01.05.03 Added new RAID Action, Device FW Update Mode, and
* associated defines.
* 08-07-07 01.05.04 Added Disable Full Rebuild bit to the ActionDataWord
* for the RAID Action MPI_RAID_ACTION_DISABLE_VOLUME.
* 01-15-08 01.05.05 Added define for MPI_RAID_ACTION_SET_VOLUME_NAME.
* --------------------------------------------------------------------------
mpi_tool.h
* 08-08-01 01.02.01 Original release.
* 08-29-01 01.02.02 Added DIAG_DATA_UPLOAD_HEADER and related defines.
* 01-16-04 01.02.03 Added defines and structures for new tools
*. MPI_TOOLBOX_ISTWI_READ_WRITE_TOOL and
* MPI_TOOLBOX_FC_MANAGEMENT_TOOL.
* 04-29-04 01.02.04 Added message structures for Diagnostic Buffer Post and
* Diagnostic Release requests and replies.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Original release for MPI v1.5.
* 10-06-04 01.05.02 Added define for MPI_DIAG_BUF_TYPE_COUNT.
* 02-09-05 01.05.03 Added frame size option to FC management tool.
* Added Beacon tool to the Toolbox.
* --------------------------------------------------------------------------
mpi_inb.h
* 05-11-04 01.03.01 Original release.
* 08-19-04 01.05.01 Original release for MPI v1.5.
* --------------------------------------------------------------------------
mpi_sas.h
* 08-19-04 01.05.01 Original release.
* 08-30-05 01.05.02 Added DeviceInfo bit for SEP.
* Added PrimFlags and Primitive field to SAS IO Unit
* Control request, and added a new operation code.
* 03-27-06 01.05.03 Added Force Full Discovery, Transmit Port Select Signal,
* and Remove Device operations to SAS IO Unit Control.
* Added DevHandle field to SAS IO Unit Control request and
* reply.
* 10-11-06 01.05.04 Fixed the name of a define for Operation field of SAS IO
* Unit Control request.
* 01-15-08 01.05.05 Added support for MPI_SAS_OP_SET_IOC_PARAMETER,
* including adding IOCParameter and IOCParameter value
* fields to SAS IO Unit Control Request.
* Added MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC define.
* --------------------------------------------------------------------------
mpi_type.h
* 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
* 06-06-00 01.00.01 Update version number for 1.0 release.
* 11-02-00 01.01.01 Original release for post 1.0 work
* 02-20-01 01.01.02 Added define and ifdef for MPI_POINTER.
* 08-08-01 01.02.01 Original release for v1.2 work.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Original release for MPI v1.5.
* 08-30-05 01.05.02 Added PowerPC option to #ifdef's.
* --------------------------------------------------------------------------
mpi_history.txt Parts list history
Filename 01.05.19 01.05.18 01.05.17 01.05.16 01.05.15
---------- -------- -------- -------- -------- --------
mpi.h 01.05.16 01.05.15 01.05.14 01.05.13 01.05.12
mpi_ioc.h 01.05.16 01.05.15 01.05.15 01.05.14 01.05.13
mpi_cnfg.h 01.05.18 01.05.17 01.05.16 01.05.15 01.05.14
mpi_init.h 01.05.09 01.05.09 01.05.09 01.05.09 01.05.09
mpi_targ.h 01.05.06 01.05.06 01.05.06 01.05.06 01.05.06
mpi_fc.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
mpi_lan.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
mpi_raid.h 01.05.05 01.05.05 01.05.04 01.05.03 01.05.03
mpi_tool.h 01.05.03 01.05.03 01.05.03 01.05.03 01.05.03
mpi_inb.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
mpi_sas.h 01.05.05 01.05.05 01.05.04 01.05.04 01.05.04
mpi_type.h 01.05.02 01.05.02 01.05.02 01.05.02 01.05.02
Filename 01.05.14 01.05.13 01.05.12 01.05.11 01.05.10 01.05.09
---------- -------- -------- -------- -------- -------- --------
mpi.h 01.05.12 01.05.11 01.05.10 01.05.09 01.05.08 01.05.07
mpi_ioc.h 01.05.12 01.05.11 01.05.10 01.05.09 01.05.09 01.05.08
mpi_cnfg.h 01.05.13 01.05.12 01.05.11 01.05.10 01.05.09 01.05.08
mpi_init.h 01.05.08 01.05.07 01.05.06 01.05.06 01.05.05 01.05.04
mpi_targ.h 01.05.06 01.05.06 01.05.05 01.05.05 01.05.05 01.05.04
mpi_fc.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
mpi_lan.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
mpi_raid.h 01.05.02 01.05.02 01.05.02 01.05.02 01.05.02 01.05.02
mpi_tool.h 01.05.03 01.05.03 01.05.03 01.05.03 01.05.03 01.05.03
mpi_inb.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
mpi_sas.h 01.05.04 01.05.03 01.05.02 01.05.01 01.05.01 01.05.01
mpi_type.h 01.05.02 01.05.02 01.05.02 01.05.01 01.05.01 01.05.01
Filename 01.05.08 01.05.07 01.05.06 01.05.05 01.05.04 01.05.03
---------- -------- -------- -------- -------- -------- --------
mpi.h 01.05.06 01.05.05 01.05.04 01.05.03 01.05.02 01.05.01
mpi_ioc.h 01.05.07 01.05.06 01.05.05 01.05.04 01.05.03 01.05.02
mpi_cnfg.h 01.05.07 01.05.07 01.05.06 01.05.05 01.05.04 01.05.03
mpi_init.h 01.05.03 01.05.03 01.05.03 01.05.02 01.05.02 01.05.01
mpi_targ.h 01.05.03 01.05.02 01.05.02 01.05.02 01.05.02 01.05.02
mpi_fc.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
mpi_lan.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
mpi_raid.h 01.05.02 01.05.02 01.05.02 01.05.01 01.05.01 01.05.01
mpi_tool.h 01.05.03 01.05.03 01.05.02 01.05.02 01.05.02 01.05.02
mpi_inb.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
mpi_sas.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
mpi_type.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
Filename 01.05.02 01.05.01 01.03.01 01.02.14 01.02.13 01.02.12
---------- -------- -------- -------- -------- -------- --------
mpi.h 01.05.01 01.05.01 01.03.01 01.02.12 01.02.11 01.02.10
mpi_ioc.h 01.05.02 01.05.01 01.03.01 01.02.09 01.02.08 01.02.08
mpi_cnfg.h 01.05.02 01.05.01 01.03.01 01.02.14 01.02.13 01.02.12
mpi_init.h 01.05.01 01.05.01 01.03.01 01.02.07 01.02.07 01.02.07
mpi_targ.h 01.05.02 01.05.01 01.03.01 01.02.09 01.02.09 01.02.09
mpi_fc.h 01.05.01 01.05.01 01.03.01 01.02.04 01.02.04 01.02.03
mpi_lan.h 01.05.01 01.05.01 01.03.01 01.02.01 01.02.01 01.02.01
mpi_raid.h 01.05.01 01.05.01 01.03.01 01.02.09 01.02.09 01.02.09
mpi_tool.h 01.05.02 01.05.01 01.03.01 01.02.01 01.02.01 01.02.01
mpi_inb.h 01.05.01 01.05.01 01.03.01
mpi_sas.h 01.05.01 01.05.01
mpi_type.h 01.05.01 01.05.01 01.03.01 01.02.04 01.02.03 01.02.02
Filename 01.02.11 01.02.10 01.02.09 01.02.08 01.02.07 01.02.06
---------- -------- -------- -------- -------- -------- --------
mpi.h 01.02.09 01.02.08 01.02.07 01.02.06 01.02.05 01.02.04
mpi_ioc.h 01.02.07 01.02.06 01.02.06 01.02.06 01.02.06 01.02.05
mpi_cnfg.h 01.02.11 01.02.10 01.02.09 01.02.08 01.02.07 01.02.06
mpi_init.h 01.02.06 01.02.06 01.02.05 01.02.05 01.02.05 01.02.04
mpi_targ.h 01.02.09 01.02.08 01.02.07 01.02.06 01.02.06 01.02.05
mpi_fc.h 01.02.03 01.02.03 01.02.03 01.02.03 01.02.03 01.02.02
mpi_lan.h 01.02.01 01.02.01 01.02.01 01.02.01 01.02.01 01.02.01
mpi_raid.h 01.02.09 01.02.08 01.02.07 01.02.07 01.02.06 01.02.05
mpi_tool.h 01.02.01 01.02.01 01.02.01 01.02.01 01.02.01 01.02.01
mpi_type.h 01.02.02 01.02.02 01.02.02 01.02.02 01.02.02 01.02.02
Filename 01.02.05 01.02.04 01.02.03 01.02.02 01.02.01 01.01.10
---------- -------- -------- -------- -------- -------- --------
mpi.h 01.02.03 01.02.02 01.02.02 01.02.01 01.02.01 01.01.07
mpi_ioc.h 01.02.04 01.02.03 01.02.03 01.02.02 01.02.01 01.01.07
mpi_cnfg.h 01.02.05 01.02.04 01.02.03 01.02.02 01.02.01 01.01.11
mpi_init.h 01.02.04 01.02.04 01.02.03 01.02.02 01.02.01 01.01.05
mpi_targ.h 01.02.04 01.02.03 01.02.02 01.02.01 01.02.01 01.01.04
mpi_fc.h 01.02.02 01.02.02 01.02.02 01.02.01 01.02.01 01.01.07
mpi_lan.h 01.02.01 01.02.01 01.02.01 01.02.01 01.02.01 01.01.03
mpi_raid.h 01.02.04 01.02.03 01.02.02 01.02.01 01.02.01 01.01.02
mpi_tool.h 01.02.02 01.02.02 01.02.02 01.02.02 01.02.01
mpi_type.h 01.02.02 01.02.02 01.02.02 01.02.02 01.02.01 01.01.02
Filename 01.01.09 01.01.08 01.01.07 01.01.06 01.01.05 01.01.04
---------- -------- -------- -------- -------- -------- --------
mpi.h 01.01.06 01.01.06 01.01.05 01.01.04 01.01.04 01.01.03
mpi_ioc.h 01.01.06 01.01.05 01.01.04 01.01.03 01.01.03 01.01.03
mpi_cnfg.h 01.01.10 01.01.09 01.01.08 01.01.07 01.01.06 01.01.05
mpi_init.h 01.01.04 01.01.03 01.01.03 01.01.02 01.01.02 01.01.02
mpi_targ.h 01.01.04 01.01.03 01.01.03 01.01.02 01.01.02 01.01.02
mpi_fc.h 01.01.06 01.01.05 01.01.05 01.01.04 01.01.04 01.01.03
mpi_lan.h 01.01.03 01.01.02 01.01.02 01.01.01 01.01.01 01.01.01
mpi_raid.h 01.01.02 01.01.01
mpi_type.h 01.01.02 01.01.02 01.01.02 01.01.01 01.01.01 01.01.01
Filename 01.01.03 01.01.02 01.01.01 01.00.07 01.00.06 01.00.05
---------- -------- -------- -------- -------- -------- --------
mpi.h 01.01.02 01.01.02 01.01.01 01.00.04 01.00.04 01.00.03
mpi_ioc.h 01.01.02 01.01.02 01.01.01 01.00.05 01.00.04 01.00.03
mpi_cnfg.h 01.01.04 01.01.03 01.01.01 01.00.05 01.00.05 01.00.04
mpi_init.h 01.01.02 01.01.02 01.01.01 01.00.02 01.00.02 01.00.02
mpi_targ.h 01.01.01 01.01.01 01.01.01 01.00.02 01.00.02 01.00.02
mpi_fc.h 01.01.02 01.01.02 01.01.01 01.00.02 01.00.02 01.00.02
mpi_lan.h 01.01.01 01.01.01 01.01.01 01.00.05 01.00.05 01.00.05
mpi_type.h 01.01.01 01.01.01 01.01.01 01.00.01 01.00.01 01.00.01
Filename 01.00.04 01.00.03 01.00.02 01.00.01 00.10.02 00.10.01
---------- -------- -------- -------- -------- -------- --------
mpi.h 01.00.02 01.00.01 01.00.01 01.00.01 00.10.02 00.10.01
mpi_ioc.h 01.00.02 01.00.02 01.00.01 01.00.01 00.10.02 00.10.01
mpi_cnfg.h 01.00.03 01.00.02 01.00.02 01.00.01 00.10.01 00.10.01
mpi_init.h 01.00.02 01.00.02 01.00.02 01.00.01 00.10.02 00.10.01
mpi_targ.h 01.00.02 01.00.01 01.00.01 01.00.01 00.10.01 00.10.01
mpi_fc.h 01.00.02 01.00.02 01.00.01 01.00.01 00.10.01 00.10.01
mpi_lan.h 01.00.03 01.00.02 01.00.01 01.00.01 00.10.02 00.10.01
mpi_type.h 01.00.01 01.00.01 01.00.01 01.00.01 00.10.01 00.10.01
* --------------------------------------------------------------------------

580
kernel/drivers/message/fusion/lsi/mpi_init.h Normal file
View File

@@ -0,0 +1,580 @@
/*
* Copyright (c) 2000-2008 LSI Corporation.
*
*
* Name: mpi_init.h
* Title: MPI initiator mode messages and structures
* Creation Date: June 8, 2000
*
* mpi_init.h Version: 01.05.09
*
* Version History
* ---------------
*
* Date Version Description
* -------- -------- ------------------------------------------------------
* 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
* 05-24-00 00.10.02 Added SenseBufferLength to _MSG_SCSI_IO_REPLY.
* 06-06-00 01.00.01 Update version number for 1.0 release.
* 06-08-00 01.00.02 Added MPI_SCSI_RSP_INFO_ definitions.
* 11-02-00 01.01.01 Original release for post 1.0 work.
* 12-04-00 01.01.02 Added MPI_SCSIIO_CONTROL_NO_DISCONNECT.
* 02-20-01 01.01.03 Started using MPI_POINTER.
* 03-27-01 01.01.04 Added structure offset comments.
* 04-10-01 01.01.05 Added new MsgFlag for MSG_SCSI_TASK_MGMT.
* 08-08-01 01.02.01 Original release for v1.2 work.
* 08-29-01 01.02.02 Added MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET.
* Added MPI_SCSI_STATE_QUEUE_TAG_REJECTED for
* MSG_SCSI_IO_REPLY.
* 09-28-01 01.02.03 Added structures and defines for SCSI Enclosure
* Processor messages.
* 10-04-01 01.02.04 Added defines for SEP request Action field.
* 05-31-02 01.02.05 Added MPI_SCSIIO_MSGFLGS_CMD_DETERMINES_DATA_DIR define
* for SCSI IO requests.
* 11-15-02 01.02.06 Added special extended SCSI Status defines for FCP.
* 06-26-03 01.02.07 Added MPI_SCSI_STATUS_FCPEXT_UNASSIGNED define.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Added MsgFlags defines for EEDP to SCSI IO request.
* Added new word to MSG_SCSI_IO_REPLY to add TaskTag field
* and a reserved U16.
* Added new MSG_SCSI_IO32_REQUEST structure.
* Added a TaskType of Clear Task Set to SCSI
* Task Management request.
* 12-07-04 01.05.02 Added support for Task Management Query Task.
* 01-15-05 01.05.03 Modified SCSI Enclosure Processor Request to support
* WWID addressing.
* 03-11-05 01.05.04 Removed EEDP flags from SCSI IO Request.
* Removed SCSI IO 32 Request.
* Modified SCSI Enclosure Processor Request and Reply to
* support Enclosure/Slot addressing rather than WWID
* addressing.
* 06-24-05 01.05.05 Added SCSI IO 32 structures and defines.
* Added four new defines for SEP SlotStatus.
* 08-03-05 01.05.06 Fixed some MPI_SCSIIO32_MSGFLGS_ defines to make them
* unique in the first 32 characters.
* 03-27-06 01.05.07 Added Task Management type of Clear ACA.
* 10-11-06 01.05.08 Shortened define for Task Management type of Clear ACA.
* 02-28-07 01.05.09 Defined two new MsgFlags bits for SCSI Task Management
* Request: Do Not Send Task IU and Soft Reset Option.
* --------------------------------------------------------------------------
*/
#ifndef MPI_INIT_H
#define MPI_INIT_H
/*****************************************************************************
*
* S C S I I n i t i a t o r M e s s a g e s
*
*****************************************************************************/
/****************************************************************************/
/* SCSI IO messages and associated structures */
/****************************************************************************/
typedef struct _MSG_SCSI_IO_REQUEST
{
U8 TargetID; /* 00h */
U8 Bus; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U8 CDBLength; /* 04h */
U8 SenseBufferLength; /* 05h */
U8 Reserved; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 LUN[8]; /* 0Ch */
U32 Control; /* 14h */
U8 CDB[16]; /* 18h */
U32 DataLength; /* 28h */
U32 SenseBufferLowAddr; /* 2Ch */
SGE_IO_UNION SGL; /* 30h */
} MSG_SCSI_IO_REQUEST, MPI_POINTER PTR_MSG_SCSI_IO_REQUEST,
SCSIIORequest_t, MPI_POINTER pSCSIIORequest_t;
/* SCSI IO MsgFlags bits */
#define MPI_SCSIIO_MSGFLGS_SENSE_WIDTH (0x01)
#define MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_32 (0x00)
#define MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_64 (0x01)
#define MPI_SCSIIO_MSGFLGS_SENSE_LOCATION (0x02)
#define MPI_SCSIIO_MSGFLGS_SENSE_LOC_HOST (0x00)
#define MPI_SCSIIO_MSGFLGS_SENSE_LOC_IOC (0x02)
#define MPI_SCSIIO_MSGFLGS_CMD_DETERMINES_DATA_DIR (0x04)
/* SCSI IO LUN fields */
#define MPI_SCSIIO_LUN_FIRST_LEVEL_ADDRESSING (0x0000FFFF)
#define MPI_SCSIIO_LUN_SECOND_LEVEL_ADDRESSING (0xFFFF0000)
#define MPI_SCSIIO_LUN_THIRD_LEVEL_ADDRESSING (0x0000FFFF)
#define MPI_SCSIIO_LUN_FOURTH_LEVEL_ADDRESSING (0xFFFF0000)
#define MPI_SCSIIO_LUN_LEVEL_1_WORD (0xFF00)
#define MPI_SCSIIO_LUN_LEVEL_1_DWORD (0x0000FF00)
/* SCSI IO Control bits */
#define MPI_SCSIIO_CONTROL_DATADIRECTION_MASK (0x03000000)
#define MPI_SCSIIO_CONTROL_NODATATRANSFER (0x00000000)
#define MPI_SCSIIO_CONTROL_WRITE (0x01000000)
#define MPI_SCSIIO_CONTROL_READ (0x02000000)
#define MPI_SCSIIO_CONTROL_ADDCDBLEN_MASK (0x3C000000)
#define MPI_SCSIIO_CONTROL_ADDCDBLEN_SHIFT (26)
#define MPI_SCSIIO_CONTROL_TASKATTRIBUTE_MASK (0x00000700)
#define MPI_SCSIIO_CONTROL_SIMPLEQ (0x00000000)
#define MPI_SCSIIO_CONTROL_HEADOFQ (0x00000100)
#define MPI_SCSIIO_CONTROL_ORDEREDQ (0x00000200)
#define MPI_SCSIIO_CONTROL_ACAQ (0x00000400)
#define MPI_SCSIIO_CONTROL_UNTAGGED (0x00000500)
#define MPI_SCSIIO_CONTROL_NO_DISCONNECT (0x00000700)
#define MPI_SCSIIO_CONTROL_TASKMANAGE_MASK (0x00FF0000)
#define MPI_SCSIIO_CONTROL_OBSOLETE (0x00800000)
#define MPI_SCSIIO_CONTROL_CLEAR_ACA_RSV (0x00400000)
#define MPI_SCSIIO_CONTROL_TARGET_RESET (0x00200000)
#define MPI_SCSIIO_CONTROL_LUN_RESET_RSV (0x00100000)
#define MPI_SCSIIO_CONTROL_RESERVED (0x00080000)
#define MPI_SCSIIO_CONTROL_CLR_TASK_SET_RSV (0x00040000)
#define MPI_SCSIIO_CONTROL_ABORT_TASK_SET (0x00020000)
#define MPI_SCSIIO_CONTROL_RESERVED2 (0x00010000)
/* SCSI IO reply structure */
typedef struct _MSG_SCSI_IO_REPLY
{
U8 TargetID; /* 00h */
U8 Bus; /* 01h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U8 CDBLength; /* 04h */
U8 SenseBufferLength; /* 05h */
U8 Reserved; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 SCSIStatus; /* 0Ch */
U8 SCSIState; /* 0Dh */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U32 TransferCount; /* 14h */
U32 SenseCount; /* 18h */
U32 ResponseInfo; /* 1Ch */
U16 TaskTag; /* 20h */
U16 Reserved1; /* 22h */
} MSG_SCSI_IO_REPLY, MPI_POINTER PTR_MSG_SCSI_IO_REPLY,
SCSIIOReply_t, MPI_POINTER pSCSIIOReply_t;
/* SCSI IO Reply SCSIStatus values (SAM-2 status codes) */
#define MPI_SCSI_STATUS_SUCCESS (0x00)
#define MPI_SCSI_STATUS_CHECK_CONDITION (0x02)
#define MPI_SCSI_STATUS_CONDITION_MET (0x04)
#define MPI_SCSI_STATUS_BUSY (0x08)
#define MPI_SCSI_STATUS_INTERMEDIATE (0x10)
#define MPI_SCSI_STATUS_INTERMEDIATE_CONDMET (0x14)
#define MPI_SCSI_STATUS_RESERVATION_CONFLICT (0x18)
#define MPI_SCSI_STATUS_COMMAND_TERMINATED (0x22)
#define MPI_SCSI_STATUS_TASK_SET_FULL (0x28)
#define MPI_SCSI_STATUS_ACA_ACTIVE (0x30)
#define MPI_SCSI_STATUS_FCPEXT_DEVICE_LOGGED_OUT (0x80)
#define MPI_SCSI_STATUS_FCPEXT_NO_LINK (0x81)
#define MPI_SCSI_STATUS_FCPEXT_UNASSIGNED (0x82)
/* SCSI IO Reply SCSIState values */
#define MPI_SCSI_STATE_AUTOSENSE_VALID (0x01)
#define MPI_SCSI_STATE_AUTOSENSE_FAILED (0x02)
#define MPI_SCSI_STATE_NO_SCSI_STATUS (0x04)
#define MPI_SCSI_STATE_TERMINATED (0x08)
#define MPI_SCSI_STATE_RESPONSE_INFO_VALID (0x10)
#define MPI_SCSI_STATE_QUEUE_TAG_REJECTED (0x20)
/* SCSI IO Reply ResponseInfo values */
/* (FCP-1 RSP_CODE values and SPI-3 Packetized Failure codes) */
#define MPI_SCSI_RSP_INFO_FUNCTION_COMPLETE (0x00000000)
#define MPI_SCSI_RSP_INFO_FCP_BURST_LEN_ERROR (0x01000000)
#define MPI_SCSI_RSP_INFO_CMND_FIELDS_INVALID (0x02000000)
#define MPI_SCSI_RSP_INFO_FCP_DATA_RO_ERROR (0x03000000)
#define MPI_SCSI_RSP_INFO_TASK_MGMT_UNSUPPORTED (0x04000000)
#define MPI_SCSI_RSP_INFO_TASK_MGMT_FAILED (0x05000000)
#define MPI_SCSI_RSP_INFO_SPI_LQ_INVALID_TYPE (0x06000000)
#define MPI_SCSI_TASKTAG_UNKNOWN (0xFFFF)
/****************************************************************************/
/* SCSI IO 32 messages and associated structures */
/****************************************************************************/
typedef struct
{
U8 CDB[20]; /* 00h */
U32 PrimaryReferenceTag; /* 14h */
U16 PrimaryApplicationTag; /* 18h */
U16 PrimaryApplicationTagMask; /* 1Ah */
U32 TransferLength; /* 1Ch */
} MPI_SCSI_IO32_CDB_EEDP32, MPI_POINTER PTR_MPI_SCSI_IO32_CDB_EEDP32,
MpiScsiIo32CdbEedp32_t, MPI_POINTER pMpiScsiIo32CdbEedp32_t;
typedef struct
{
U8 CDB[16]; /* 00h */
U32 DataLength; /* 10h */
U32 PrimaryReferenceTag; /* 14h */
U16 PrimaryApplicationTag; /* 18h */
U16 PrimaryApplicationTagMask; /* 1Ah */
U32 TransferLength; /* 1Ch */
} MPI_SCSI_IO32_CDB_EEDP16, MPI_POINTER PTR_MPI_SCSI_IO32_CDB_EEDP16,
MpiScsiIo32CdbEedp16_t, MPI_POINTER pMpiScsiIo32CdbEedp16_t;
typedef union
{
U8 CDB32[32];
MPI_SCSI_IO32_CDB_EEDP32 EEDP32;
MPI_SCSI_IO32_CDB_EEDP16 EEDP16;
SGE_SIMPLE_UNION SGE;
} MPI_SCSI_IO32_CDB_UNION, MPI_POINTER PTR_MPI_SCSI_IO32_CDB_UNION,
MpiScsiIo32Cdb_t, MPI_POINTER pMpiScsiIo32Cdb_t;
typedef struct
{
U8 TargetID; /* 00h */
U8 Bus; /* 01h */
U16 Reserved1; /* 02h */
U32 Reserved2; /* 04h */
} MPI_SCSI_IO32_BUS_TARGET_ID_FORM, MPI_POINTER PTR_MPI_SCSI_IO32_BUS_TARGET_ID_FORM,
MpiScsiIo32BusTargetIdForm_t, MPI_POINTER pMpiScsiIo32BusTargetIdForm_t;
typedef union
{
MPI_SCSI_IO32_BUS_TARGET_ID_FORM SCSIID;
U64 WWID;
} MPI_SCSI_IO32_ADDRESS, MPI_POINTER PTR_MPI_SCSI_IO32_ADDRESS,
MpiScsiIo32Address_t, MPI_POINTER pMpiScsiIo32Address_t;
typedef struct _MSG_SCSI_IO32_REQUEST
{
U8 Port; /* 00h */
U8 Reserved1; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U8 CDBLength; /* 04h */
U8 SenseBufferLength; /* 05h */
U8 Flags; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 LUN[8]; /* 0Ch */
U32 Control; /* 14h */
MPI_SCSI_IO32_CDB_UNION CDB; /* 18h */
U32 DataLength; /* 38h */
U32 BidirectionalDataLength; /* 3Ch */
U32 SecondaryReferenceTag; /* 40h */
U16 SecondaryApplicationTag; /* 44h */
U16 Reserved2; /* 46h */
U16 EEDPFlags; /* 48h */
U16 ApplicationTagTranslationMask; /* 4Ah */
U32 EEDPBlockSize; /* 4Ch */
MPI_SCSI_IO32_ADDRESS DeviceAddress; /* 50h */
U8 SGLOffset0; /* 58h */
U8 SGLOffset1; /* 59h */
U8 SGLOffset2; /* 5Ah */
U8 SGLOffset3; /* 5Bh */
U32 Reserved3; /* 5Ch */
U32 Reserved4; /* 60h */
U32 SenseBufferLowAddr; /* 64h */
SGE_IO_UNION SGL; /* 68h */
} MSG_SCSI_IO32_REQUEST, MPI_POINTER PTR_MSG_SCSI_IO32_REQUEST,
SCSIIO32Request_t, MPI_POINTER pSCSIIO32Request_t;
/* SCSI IO 32 MsgFlags bits */
#define MPI_SCSIIO32_MSGFLGS_SENSE_WIDTH (0x01)
#define MPI_SCSIIO32_MSGFLGS_32_SENSE_WIDTH (0x00)
#define MPI_SCSIIO32_MSGFLGS_64_SENSE_WIDTH (0x01)
#define MPI_SCSIIO32_MSGFLGS_SENSE_LOCATION (0x02)
#define MPI_SCSIIO32_MSGFLGS_SENSE_LOC_HOST (0x00)
#define MPI_SCSIIO32_MSGFLGS_SENSE_LOC_IOC (0x02)
#define MPI_SCSIIO32_MSGFLGS_CMD_DETERMINES_DATA_DIR (0x04)
#define MPI_SCSIIO32_MSGFLGS_SGL_OFFSETS_CHAINS (0x08)
#define MPI_SCSIIO32_MSGFLGS_MULTICAST (0x10)
#define MPI_SCSIIO32_MSGFLGS_BIDIRECTIONAL (0x20)
#define MPI_SCSIIO32_MSGFLGS_LARGE_CDB (0x40)
/* SCSI IO 32 Flags bits */
#define MPI_SCSIIO32_FLAGS_FORM_MASK (0x03)
#define MPI_SCSIIO32_FLAGS_FORM_SCSIID (0x00)
#define MPI_SCSIIO32_FLAGS_FORM_WWID (0x01)
/* SCSI IO 32 LUN fields */
#define MPI_SCSIIO32_LUN_FIRST_LEVEL_ADDRESSING (0x0000FFFF)
#define MPI_SCSIIO32_LUN_SECOND_LEVEL_ADDRESSING (0xFFFF0000)
#define MPI_SCSIIO32_LUN_THIRD_LEVEL_ADDRESSING (0x0000FFFF)
#define MPI_SCSIIO32_LUN_FOURTH_LEVEL_ADDRESSING (0xFFFF0000)
#define MPI_SCSIIO32_LUN_LEVEL_1_WORD (0xFF00)
#define MPI_SCSIIO32_LUN_LEVEL_1_DWORD (0x0000FF00)
/* SCSI IO 32 Control bits */
#define MPI_SCSIIO32_CONTROL_DATADIRECTION_MASK (0x03000000)
#define MPI_SCSIIO32_CONTROL_NODATATRANSFER (0x00000000)
#define MPI_SCSIIO32_CONTROL_WRITE (0x01000000)
#define MPI_SCSIIO32_CONTROL_READ (0x02000000)
#define MPI_SCSIIO32_CONTROL_BIDIRECTIONAL (0x03000000)
#define MPI_SCSIIO32_CONTROL_ADDCDBLEN_MASK (0xFC000000)
#define MPI_SCSIIO32_CONTROL_ADDCDBLEN_SHIFT (26)
#define MPI_SCSIIO32_CONTROL_TASKATTRIBUTE_MASK (0x00000700)
#define MPI_SCSIIO32_CONTROL_SIMPLEQ (0x00000000)
#define MPI_SCSIIO32_CONTROL_HEADOFQ (0x00000100)
#define MPI_SCSIIO32_CONTROL_ORDEREDQ (0x00000200)
#define MPI_SCSIIO32_CONTROL_ACAQ (0x00000400)
#define MPI_SCSIIO32_CONTROL_UNTAGGED (0x00000500)
#define MPI_SCSIIO32_CONTROL_NO_DISCONNECT (0x00000700)
#define MPI_SCSIIO32_CONTROL_TASKMANAGE_MASK (0x00FF0000)
#define MPI_SCSIIO32_CONTROL_OBSOLETE (0x00800000)
#define MPI_SCSIIO32_CONTROL_CLEAR_ACA_RSV (0x00400000)
#define MPI_SCSIIO32_CONTROL_TARGET_RESET (0x00200000)
#define MPI_SCSIIO32_CONTROL_LUN_RESET_RSV (0x00100000)
#define MPI_SCSIIO32_CONTROL_RESERVED (0x00080000)
#define MPI_SCSIIO32_CONTROL_CLR_TASK_SET_RSV (0x00040000)
#define MPI_SCSIIO32_CONTROL_ABORT_TASK_SET (0x00020000)
#define MPI_SCSIIO32_CONTROL_RESERVED2 (0x00010000)
/* SCSI IO 32 EEDPFlags */
#define MPI_SCSIIO32_EEDPFLAGS_MASK_OP (0x0007)
#define MPI_SCSIIO32_EEDPFLAGS_NOOP_OP (0x0000)
#define MPI_SCSIIO32_EEDPFLAGS_CHK_OP (0x0001)
#define MPI_SCSIIO32_EEDPFLAGS_STRIP_OP (0x0002)
#define MPI_SCSIIO32_EEDPFLAGS_CHKRM_OP (0x0003)
#define MPI_SCSIIO32_EEDPFLAGS_INSERT_OP (0x0004)
#define MPI_SCSIIO32_EEDPFLAGS_REPLACE_OP (0x0006)
#define MPI_SCSIIO32_EEDPFLAGS_CHKREGEN_OP (0x0007)
#define MPI_SCSIIO32_EEDPFLAGS_PASS_REF_TAG (0x0008)
#define MPI_SCSIIO32_EEDPFLAGS_8_9THS_MODE (0x0010)
#define MPI_SCSIIO32_EEDPFLAGS_T10_CHK_MASK (0x0700)
#define MPI_SCSIIO32_EEDPFLAGS_T10_CHK_GUARD (0x0100)
#define MPI_SCSIIO32_EEDPFLAGS_T10_CHK_REFTAG (0x0200)
#define MPI_SCSIIO32_EEDPFLAGS_T10_CHK_LBATAG (0x0400)
#define MPI_SCSIIO32_EEDPFLAGS_T10_CHK_SHIFT (8)
#define MPI_SCSIIO32_EEDPFLAGS_INC_SEC_APPTAG (0x1000)
#define MPI_SCSIIO32_EEDPFLAGS_INC_PRI_APPTAG (0x2000)
#define MPI_SCSIIO32_EEDPFLAGS_INC_SEC_REFTAG (0x4000)
#define MPI_SCSIIO32_EEDPFLAGS_INC_PRI_REFTAG (0x8000)
/* SCSIIO32 IO reply structure */
typedef struct _MSG_SCSIIO32_IO_REPLY
{
U8 Port; /* 00h */
U8 Reserved1; /* 01h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U8 CDBLength; /* 04h */
U8 SenseBufferLength; /* 05h */
U8 Flags; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 SCSIStatus; /* 0Ch */
U8 SCSIState; /* 0Dh */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U32 TransferCount; /* 14h */
U32 SenseCount; /* 18h */
U32 ResponseInfo; /* 1Ch */
U16 TaskTag; /* 20h */
U16 Reserved2; /* 22h */
U32 BidirectionalTransferCount; /* 24h */
} MSG_SCSIIO32_IO_REPLY, MPI_POINTER PTR_MSG_SCSIIO32_IO_REPLY,
SCSIIO32Reply_t, MPI_POINTER pSCSIIO32Reply_t;
/****************************************************************************/
/* SCSI Task Management messages */
/****************************************************************************/
typedef struct _MSG_SCSI_TASK_MGMT
{
U8 TargetID; /* 00h */
U8 Bus; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U8 Reserved; /* 04h */
U8 TaskType; /* 05h */
U8 Reserved1; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 LUN[8]; /* 0Ch */
U32 Reserved2[7]; /* 14h */
U32 TaskMsgContext; /* 30h */
} MSG_SCSI_TASK_MGMT, MPI_POINTER PTR_SCSI_TASK_MGMT,
SCSITaskMgmt_t, MPI_POINTER pSCSITaskMgmt_t;
/* TaskType values */
#define MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK (0x01)
#define MPI_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET (0x02)
#define MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET (0x03)
#define MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS (0x04)
#define MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05)
#define MPI_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06)
#define MPI_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07)
#define MPI_SCSITASKMGMT_TASKTYPE_CLR_ACA (0x08)
/* MsgFlags bits */
#define MPI_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x01)
#define MPI_SCSITASKMGMT_MSGFLAGS_TARGET_RESET_OPTION (0x00)
#define MPI_SCSITASKMGMT_MSGFLAGS_LIP_RESET_OPTION (0x02)
#define MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION (0x04)
#define MPI_SCSITASKMGMT_MSGFLAGS_SOFT_RESET_OPTION (0x08)
/* SCSI Task Management Reply */
typedef struct _MSG_SCSI_TASK_MGMT_REPLY
{
U8 TargetID; /* 00h */
U8 Bus; /* 01h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U8 ResponseCode; /* 04h */
U8 TaskType; /* 05h */
U8 Reserved1; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 Reserved2[2]; /* 0Ch */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U32 TerminationCount; /* 14h */
} MSG_SCSI_TASK_MGMT_REPLY, MPI_POINTER PTR_MSG_SCSI_TASK_MGMT_REPLY,
SCSITaskMgmtReply_t, MPI_POINTER pSCSITaskMgmtReply_t;
/* ResponseCode values */
#define MPI_SCSITASKMGMT_RSP_TM_COMPLETE (0x00)
#define MPI_SCSITASKMGMT_RSP_INVALID_FRAME (0x02)
#define MPI_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED (0x04)
#define MPI_SCSITASKMGMT_RSP_TM_FAILED (0x05)
#define MPI_SCSITASKMGMT_RSP_TM_SUCCEEDED (0x08)
#define MPI_SCSITASKMGMT_RSP_TM_INVALID_LUN (0x09)
#define MPI_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC (0x80)
/****************************************************************************/
/* SCSI Enclosure Processor messages */
/****************************************************************************/
typedef struct _MSG_SEP_REQUEST
{
U8 TargetID; /* 00h */
U8 Bus; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U8 Action; /* 04h */
U8 Flags; /* 05h */
U8 Reserved1; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U32 SlotStatus; /* 0Ch */
U32 Reserved2; /* 10h */
U32 Reserved3; /* 14h */
U32 Reserved4; /* 18h */
U16 Slot; /* 1Ch */
U16 EnclosureHandle; /* 1Eh */
} MSG_SEP_REQUEST, MPI_POINTER PTR_MSG_SEP_REQUEST,
SEPRequest_t, MPI_POINTER pSEPRequest_t;
/* Action defines */
#define MPI_SEP_REQ_ACTION_WRITE_STATUS (0x00)
#define MPI_SEP_REQ_ACTION_READ_STATUS (0x01)
/* Flags defines */
#define MPI_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS (0x01)
#define MPI_SEP_REQ_FLAGS_BUS_TARGETID_ADDRESS (0x00)
/* SlotStatus bits for MSG_SEP_REQUEST */
#define MPI_SEP_REQ_SLOTSTATUS_NO_ERROR (0x00000001)
#define MPI_SEP_REQ_SLOTSTATUS_DEV_FAULTY (0x00000002)
#define MPI_SEP_REQ_SLOTSTATUS_DEV_REBUILDING (0x00000004)
#define MPI_SEP_REQ_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008)
#define MPI_SEP_REQ_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010)
#define MPI_SEP_REQ_SLOTSTATUS_PARITY_CHECK (0x00000020)
#define MPI_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT (0x00000040)
#define MPI_SEP_REQ_SLOTSTATUS_UNCONFIGURED (0x00000080)
#define MPI_SEP_REQ_SLOTSTATUS_HOT_SPARE (0x00000100)
#define MPI_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED (0x00000200)
#define MPI_SEP_REQ_SLOTSTATUS_REQ_CONSISTENCY_CHECK (0x00001000)
#define MPI_SEP_REQ_SLOTSTATUS_DISABLE (0x00002000)
#define MPI_SEP_REQ_SLOTSTATUS_REQ_RESERVED_DEVICE (0x00004000)
#define MPI_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000)
#define MPI_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE (0x00040000)
#define MPI_SEP_REQ_SLOTSTATUS_REQUEST_INSERT (0x00080000)
#define MPI_SEP_REQ_SLOTSTATUS_DO_NOT_MOVE (0x00400000)
#define MPI_SEP_REQ_SLOTSTATUS_ACTIVE (0x00800000)
#define MPI_SEP_REQ_SLOTSTATUS_B_ENABLE_BYPASS (0x04000000)
#define MPI_SEP_REQ_SLOTSTATUS_A_ENABLE_BYPASS (0x08000000)
#define MPI_SEP_REQ_SLOTSTATUS_DEV_OFF (0x10000000)
#define MPI_SEP_REQ_SLOTSTATUS_SWAP_RESET (0x80000000)
typedef struct _MSG_SEP_REPLY
{
U8 TargetID; /* 00h */
U8 Bus; /* 01h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U8 Action; /* 04h */
U8 Reserved1; /* 05h */
U8 Reserved2; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U16 Reserved3; /* 0Ch */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U32 SlotStatus; /* 14h */
U32 Reserved4; /* 18h */
U16 Slot; /* 1Ch */
U16 EnclosureHandle; /* 1Eh */
} MSG_SEP_REPLY, MPI_POINTER PTR_MSG_SEP_REPLY,
SEPReply_t, MPI_POINTER pSEPReply_t;
/* SlotStatus bits for MSG_SEP_REPLY */
#define MPI_SEP_REPLY_SLOTSTATUS_NO_ERROR (0x00000001)
#define MPI_SEP_REPLY_SLOTSTATUS_DEV_FAULTY (0x00000002)
#define MPI_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING (0x00000004)
#define MPI_SEP_REPLY_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008)
#define MPI_SEP_REPLY_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010)
#define MPI_SEP_REPLY_SLOTSTATUS_PARITY_CHECK (0x00000020)
#define MPI_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT (0x00000040)
#define MPI_SEP_REPLY_SLOTSTATUS_UNCONFIGURED (0x00000080)
#define MPI_SEP_REPLY_SLOTSTATUS_HOT_SPARE (0x00000100)
#define MPI_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED (0x00000200)
#define MPI_SEP_REPLY_SLOTSTATUS_CONSISTENCY_CHECK (0x00001000)
#define MPI_SEP_REPLY_SLOTSTATUS_DISABLE (0x00002000)
#define MPI_SEP_REPLY_SLOTSTATUS_RESERVED_DEVICE (0x00004000)
#define MPI_SEP_REPLY_SLOTSTATUS_REPORT (0x00010000)
#define MPI_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000)
#define MPI_SEP_REPLY_SLOTSTATUS_REMOVE_READY (0x00040000)
#define MPI_SEP_REPLY_SLOTSTATUS_INSERT_READY (0x00080000)
#define MPI_SEP_REPLY_SLOTSTATUS_DO_NOT_REMOVE (0x00400000)
#define MPI_SEP_REPLY_SLOTSTATUS_ACTIVE (0x00800000)
#define MPI_SEP_REPLY_SLOTSTATUS_B_BYPASS_ENABLED (0x01000000)
#define MPI_SEP_REPLY_SLOTSTATUS_A_BYPASS_ENABLED (0x02000000)
#define MPI_SEP_REPLY_SLOTSTATUS_B_ENABLE_BYPASS (0x04000000)
#define MPI_SEP_REPLY_SLOTSTATUS_A_ENABLE_BYPASS (0x08000000)
#define MPI_SEP_REPLY_SLOTSTATUS_DEV_OFF (0x10000000)
#define MPI_SEP_REPLY_SLOTSTATUS_FAULT_SENSED (0x40000000)
#define MPI_SEP_REPLY_SLOTSTATUS_SWAPPED (0x80000000)
#endif

1206
kernel/drivers/message/fusion/lsi/mpi_ioc.h Normal file
View File

File diff suppressed because it is too large Load Diff

214
kernel/drivers/message/fusion/lsi/mpi_lan.h Normal file
View File

@@ -0,0 +1,214 @@
/*
* Copyright (c) 2000-2008 LSI Corporation.
*
*
* Name: mpi_lan.h
* Title: MPI LAN messages and structures
* Creation Date: June 30, 2000
*
* mpi_lan.h Version: 01.05.01
*
* Version History
* ---------------
*
* Date Version Description
* -------- -------- ------------------------------------------------------
* 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
* 05-24-00 00.10.02 Added LANStatus field to _MSG_LAN_SEND_REPLY.
* Added LANStatus field to _MSG_LAN_RECEIVE_POST_REPLY.
* Moved ListCount field in _MSG_LAN_RECEIVE_POST_REPLY.
* 06-06-00 01.00.01 Update version number for 1.0 release.
* 06-12-00 01.00.02 Added MPI_ to BUCKETSTATUS_ definitions.
* 06-22-00 01.00.03 Major changes to match new LAN definition in 1.0 spec.
* 06-30-00 01.00.04 Added Context Reply definitions per revised proposal.
* Changed transaction context usage to bucket/buffer.
* 07-05-00 01.00.05 Removed LAN_RECEIVE_POST_BUCKET_CONTEXT_MASK definition
* to lan private header file
* 11-02-00 01.01.01 Original release for post 1.0 work
* 02-20-01 01.01.02 Started using MPI_POINTER.
* 03-27-01 01.01.03 Added structure offset comments.
* 08-08-01 01.02.01 Original release for v1.2 work.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Original release for MPI v1.5.
* --------------------------------------------------------------------------
*/
#ifndef MPI_LAN_H
#define MPI_LAN_H
/******************************************************************************
*
* L A N M e s s a g e s
*
*******************************************************************************/
/* LANSend messages */
typedef struct _MSG_LAN_SEND_REQUEST
{
U16 Reserved; /* 00h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 Reserved2; /* 04h */
U8 PortNumber; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
SGE_MPI_UNION SG_List[1]; /* 0Ch */
} MSG_LAN_SEND_REQUEST, MPI_POINTER PTR_MSG_LAN_SEND_REQUEST,
LANSendRequest_t, MPI_POINTER pLANSendRequest_t;
typedef struct _MSG_LAN_SEND_REPLY
{
U16 Reserved; /* 00h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U8 Reserved2; /* 04h */
U8 NumberOfContexts; /* 05h */
U8 PortNumber; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U16 Reserved3; /* 0Ch */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U32 BufferContext; /* 14h */
} MSG_LAN_SEND_REPLY, MPI_POINTER PTR_MSG_LAN_SEND_REPLY,
LANSendReply_t, MPI_POINTER pLANSendReply_t;
/* LANReceivePost */
typedef struct _MSG_LAN_RECEIVE_POST_REQUEST
{
U16 Reserved; /* 00h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 Reserved2; /* 04h */
U8 PortNumber; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U32 BucketCount; /* 0Ch */
SGE_MPI_UNION SG_List[1]; /* 10h */
} MSG_LAN_RECEIVE_POST_REQUEST, MPI_POINTER PTR_MSG_LAN_RECEIVE_POST_REQUEST,
LANReceivePostRequest_t, MPI_POINTER pLANReceivePostRequest_t;
typedef struct _MSG_LAN_RECEIVE_POST_REPLY
{
U16 Reserved; /* 00h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U8 Reserved2; /* 04h */
U8 NumberOfContexts; /* 05h */
U8 PortNumber; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U16 Reserved3; /* 0Ch */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U32 BucketsRemaining; /* 14h */
U32 PacketOffset; /* 18h */
U32 PacketLength; /* 1Ch */
U32 BucketContext[1]; /* 20h */
} MSG_LAN_RECEIVE_POST_REPLY, MPI_POINTER PTR_MSG_LAN_RECEIVE_POST_REPLY,
LANReceivePostReply_t, MPI_POINTER pLANReceivePostReply_t;
/* LANReset */
typedef struct _MSG_LAN_RESET_REQUEST
{
U16 Reserved; /* 00h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 Reserved2; /* 04h */
U8 PortNumber; /* 05h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
} MSG_LAN_RESET_REQUEST, MPI_POINTER PTR_MSG_LAN_RESET_REQUEST,
LANResetRequest_t, MPI_POINTER pLANResetRequest_t;
typedef struct _MSG_LAN_RESET_REPLY
{
U16 Reserved; /* 00h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U16 Reserved2; /* 04h */
U8 PortNumber; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U16 Reserved3; /* 0Ch */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
} MSG_LAN_RESET_REPLY, MPI_POINTER PTR_MSG_LAN_RESET_REPLY,
LANResetReply_t, MPI_POINTER pLANResetReply_t;
/****************************************************************************/
/* LAN Context Reply defines and macros */
/****************************************************************************/
#define LAN_REPLY_PACKET_LENGTH_MASK (0x0000FFFF)
#define LAN_REPLY_PACKET_LENGTH_SHIFT (0)
#define LAN_REPLY_BUCKET_CONTEXT_MASK (0x07FF0000)
#define LAN_REPLY_BUCKET_CONTEXT_SHIFT (16)
#define LAN_REPLY_BUFFER_CONTEXT_MASK (0x07FFFFFF)
#define LAN_REPLY_BUFFER_CONTEXT_SHIFT (0)
#define LAN_REPLY_FORM_MASK (0x18000000)
#define LAN_REPLY_FORM_RECEIVE_SINGLE (0x00)
#define LAN_REPLY_FORM_RECEIVE_MULTIPLE (0x01)
#define LAN_REPLY_FORM_SEND_SINGLE (0x02)
#define LAN_REPLY_FORM_MESSAGE_CONTEXT (0x03)
#define LAN_REPLY_FORM_SHIFT (27)
#define GET_LAN_PACKET_LENGTH(x) (((x) & LAN_REPLY_PACKET_LENGTH_MASK) \
>> LAN_REPLY_PACKET_LENGTH_SHIFT)
#define SET_LAN_PACKET_LENGTH(x, lth) \
((x) = ((x) & ~LAN_REPLY_PACKET_LENGTH_MASK) | \
(((lth) << LAN_REPLY_PACKET_LENGTH_SHIFT) & \
LAN_REPLY_PACKET_LENGTH_MASK))
#define GET_LAN_BUCKET_CONTEXT(x) (((x) & LAN_REPLY_BUCKET_CONTEXT_MASK) \
>> LAN_REPLY_BUCKET_CONTEXT_SHIFT)
#define SET_LAN_BUCKET_CONTEXT(x, ctx) \
((x) = ((x) & ~LAN_REPLY_BUCKET_CONTEXT_MASK) | \
(((ctx) << LAN_REPLY_BUCKET_CONTEXT_SHIFT) & \
LAN_REPLY_BUCKET_CONTEXT_MASK))
#define GET_LAN_BUFFER_CONTEXT(x) (((x) & LAN_REPLY_BUFFER_CONTEXT_MASK) \
>> LAN_REPLY_BUFFER_CONTEXT_SHIFT)
#define SET_LAN_BUFFER_CONTEXT(x, ctx) \
((x) = ((x) & ~LAN_REPLY_BUFFER_CONTEXT_MASK) | \
(((ctx) << LAN_REPLY_BUFFER_CONTEXT_SHIFT) & \
LAN_REPLY_BUFFER_CONTEXT_MASK))
#define GET_LAN_FORM(x) (((x) & LAN_REPLY_FORM_MASK) \
>> LAN_REPLY_FORM_SHIFT)
#define SET_LAN_FORM(x, frm) \
((x) = ((x) & ~LAN_REPLY_FORM_MASK) | \
(((frm) << LAN_REPLY_FORM_SHIFT) & \
LAN_REPLY_FORM_MASK))
/****************************************************************************/
/* LAN Current Device State defines */
/****************************************************************************/
#define MPI_LAN_DEVICE_STATE_RESET (0x00)
#define MPI_LAN_DEVICE_STATE_OPERATIONAL (0x01)
/****************************************************************************/
/* LAN Loopback defines */
/****************************************************************************/
#define MPI_LAN_TX_MODES_ENABLE_LOOPBACK_SUPPRESSION (0x01)
#endif

89
kernel/drivers/message/fusion/lsi/mpi_log_fc.h Normal file
View File

@@ -0,0 +1,89 @@
/*
* Copyright (c) 2000-2008 LSI Corporation. All rights reserved.
*
* NAME: fc_log.h
* SUMMARY: MPI IocLogInfo definitions for the SYMFC9xx chips
* DESCRIPTION: Contains the enumerated list of values that may be returned
* in the IOCLogInfo field of a MPI Default Reply Message.
*
* CREATION DATE: 6/02/2000
* ID: $Id: fc_log.h,v 4.6 2001/07/26 14:41:33 sschremm Exp $
*/
/*
* MpiIocLogInfo_t enum
*
* These 32 bit values are used in the IOCLogInfo field of the MPI reply
* messages.
* The value is 0xabcccccc where
* a = The type of log info as per the MPI spec. Since these codes are
* all for Fibre Channel this value will always be 2.
* b = Specifies a subclass of the firmware where
* 0 = FCP Initiator
* 1 = FCP Target
* 2 = LAN
* 3 = MPI Message Layer
* 4 = FC Link
* 5 = Context Manager
* 6 = Invalid Field Offset
* 7 = State Change Info
* all others are reserved for future use
* c = A specific value within the subclass.
*
* NOTE: Any new values should be added to the end of each subclass so that the
* codes remain consistent across firmware releases.
*/
typedef enum _MpiIocLogInfoFc
{
MPI_IOCLOGINFO_FC_INIT_BASE = 0x20000000,
MPI_IOCLOGINFO_FC_INIT_ERROR_OUT_OF_ORDER_FRAME = 0x20000001, /* received an out of order frame - unsupported */
MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_START_OF_FRAME = 0x20000002, /* Bad Rx Frame, bad start of frame primative */
MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_END_OF_FRAME = 0x20000003, /* Bad Rx Frame, bad end of frame primative */
MPI_IOCLOGINFO_FC_INIT_ERROR_OVER_RUN = 0x20000004, /* Bad Rx Frame, overrun */
MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OTHER = 0x20000005, /* Other errors caught by IOC which require retries */
MPI_IOCLOGINFO_FC_INIT_ERROR_SUBPROC_DEAD = 0x20000006, /* Main processor could not initialize sub-processor */
MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OVERRUN = 0x20000007, /* Scatter Gather overrun */
MPI_IOCLOGINFO_FC_INIT_ERROR_RX_BAD_STATUS = 0x20000008, /* Receiver detected context mismatch via invalid header */
MPI_IOCLOGINFO_FC_INIT_ERROR_RX_UNEXPECTED_FRAME= 0x20000009, /* CtxMgr detected unsupported frame type */
MPI_IOCLOGINFO_FC_INIT_ERROR_LINK_FAILURE = 0x2000000A, /* Link failure occurred */
MPI_IOCLOGINFO_FC_INIT_ERROR_TX_TIMEOUT = 0x2000000B, /* Transmitter timeout error */
MPI_IOCLOGINFO_FC_TARGET_BASE = 0x21000000,
MPI_IOCLOGINFO_FC_TARGET_NO_PDISC = 0x21000001, /* not sent because we are waiting for a PDISC from the initiator */
MPI_IOCLOGINFO_FC_TARGET_NO_LOGIN = 0x21000002, /* not sent because we are not logged in to the remote node */
MPI_IOCLOGINFO_FC_TARGET_DOAR_KILLED_BY_LIP = 0x21000003, /* Data Out, Auto Response, not sent due to a LIP */
MPI_IOCLOGINFO_FC_TARGET_DIAR_KILLED_BY_LIP = 0x21000004, /* Data In, Auto Response, not sent due to a LIP */
MPI_IOCLOGINFO_FC_TARGET_DIAR_MISSING_DATA = 0x21000005, /* Data In, Auto Response, missing data frames */
MPI_IOCLOGINFO_FC_TARGET_DONR_KILLED_BY_LIP = 0x21000006, /* Data Out, No Response, not sent due to a LIP */
MPI_IOCLOGINFO_FC_TARGET_WRSP_KILLED_BY_LIP = 0x21000007, /* Auto-response after a write not sent due to a LIP */
MPI_IOCLOGINFO_FC_TARGET_DINR_KILLED_BY_LIP = 0x21000008, /* Data In, No Response, not completed due to a LIP */
MPI_IOCLOGINFO_FC_TARGET_DINR_MISSING_DATA = 0x21000009, /* Data In, No Response, missing data frames */
MPI_IOCLOGINFO_FC_TARGET_MRSP_KILLED_BY_LIP = 0x2100000a, /* Manual Response not sent due to a LIP */
MPI_IOCLOGINFO_FC_TARGET_NO_CLASS_3 = 0x2100000b, /* not sent because remote node does not support Class 3 */
MPI_IOCLOGINFO_FC_TARGET_LOGIN_NOT_VALID = 0x2100000c, /* not sent because login to remote node not validated */
MPI_IOCLOGINFO_FC_TARGET_FROM_OUTBOUND = 0x2100000e, /* cleared from the outbound queue after a logout */
MPI_IOCLOGINFO_FC_TARGET_WAITING_FOR_DATA_IN = 0x2100000f, /* cleared waiting for data after a logout */
MPI_IOCLOGINFO_FC_LAN_BASE = 0x22000000,
MPI_IOCLOGINFO_FC_LAN_TRANS_SGL_MISSING = 0x22000001, /* Transaction Context Sgl Missing */
MPI_IOCLOGINFO_FC_LAN_TRANS_WRONG_PLACE = 0x22000002, /* Transaction Context found before an EOB */
MPI_IOCLOGINFO_FC_LAN_TRANS_RES_BITS_SET = 0x22000003, /* Transaction Context value has reserved bits set */
MPI_IOCLOGINFO_FC_LAN_WRONG_SGL_FLAG = 0x22000004, /* Invalid SGL Flags */
MPI_IOCLOGINFO_FC_MSG_BASE = 0x23000000,
MPI_IOCLOGINFO_FC_LINK_BASE = 0x24000000,
MPI_IOCLOGINFO_FC_LINK_LOOP_INIT_TIMEOUT = 0x24000001, /* Loop initialization timed out */
MPI_IOCLOGINFO_FC_LINK_ALREADY_INITIALIZED = 0x24000002, /* Another system controller already initialized the loop */
MPI_IOCLOGINFO_FC_LINK_LINK_NOT_ESTABLISHED = 0x24000003, /* Not synchronized to signal or still negotiating (possible cable problem) */
MPI_IOCLOGINFO_FC_LINK_CRC_ERROR = 0x24000004, /* CRC check detected error on received frame */
MPI_IOCLOGINFO_FC_CTX_BASE = 0x25000000,
MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET = 0x26000000, /* The lower 24 bits give the byte offset of the field in the request message that is invalid */
MPI_IOCLOGINFO_FC_INVALID_FIELD_MAX_OFFSET = 0x26ffffff,
MPI_IOCLOGINFO_FC_STATE_CHANGE = 0x27000000 /* The lower 24 bits give additional information concerning state change */
} MpiIocLogInfoFc_t;

322
kernel/drivers/message/fusion/lsi/mpi_log_sas.h Normal file
View File

@@ -0,0 +1,322 @@
/***************************************************************************
* *
* Copyright (c) 2000-2008 LSI Corporation. All rights reserved. *
* *
* Description *
* ------------ *
* This include file contains SAS firmware interface IOC Log Info codes *
* *
*-------------------------------------------------------------------------*
*/
#ifndef IOPI_IOCLOGINFO_H_INCLUDED
#define IOPI_IOCLOGINFO_H_INCLUDED
#define SAS_LOGINFO_NEXUS_LOSS 0x31170000
#define SAS_LOGINFO_MASK 0xFFFF0000
/****************************************************************************/
/* IOC LOGINFO defines, 0x00000000 - 0x0FFFFFFF */
/* Format: */
/* Bits 31-28: MPI_IOCLOGINFO_TYPE_SAS (3) */
/* Bits 27-24: IOC_LOGINFO_ORIGINATOR: 0=IOP, 1=PL, 2=IR */
/* Bits 23-16: LOGINFO_CODE */
/* Bits 15-0: LOGINFO_CODE Specific */
/****************************************************************************/
/****************************************************************************/
/* IOC_LOGINFO_ORIGINATOR defines */
/****************************************************************************/
#define IOC_LOGINFO_ORIGINATOR_IOP (0x00000000)
#define IOC_LOGINFO_ORIGINATOR_PL (0x01000000)
#define IOC_LOGINFO_ORIGINATOR_IR (0x02000000)
#define IOC_LOGINFO_ORIGINATOR_MASK (0x0F000000)
/****************************************************************************/
/* LOGINFO_CODE defines */
/****************************************************************************/
#define IOC_LOGINFO_CODE_MASK (0x00FF0000)
#define IOC_LOGINFO_CODE_SHIFT (16)
/****************************************************************************/
/* IOP LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = IOP */
/****************************************************************************/
#define IOP_LOGINFO_CODE_INVALID_SAS_ADDRESS (0x00010000)
#define IOP_LOGINFO_CODE_UNUSED2 (0x00020000)
#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE (0x00030000)
#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_RT (0x00030100) /* Route Table Entry not found */
#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PN (0x00030200) /* Invalid Page Number */
#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_FORM (0x00030300) /* Invalid FORM */
#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT (0x00030400) /* Invalid Page Type */
#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DNM (0x00030500) /* Device Not Mapped */
#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PERSIST (0x00030600) /* Persistent Page not found */
#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DEFAULT (0x00030700) /* Default Page not found */
#define IOP_LOGINFO_CODE_FWUPLOAD_NO_FLASH_AVAILABLE (0x0003E000) /* Tried to upload from flash, but there is none */
#define IOP_LOGINFO_CODE_FWUPLOAD_UNKNOWN_IMAGE_TYPE (0x0003E001) /* ImageType field contents were invalid */
#define IOP_LOGINFO_CODE_FWUPLOAD_WRONG_IMAGE_SIZE (0x0003E002) /* ImageSize field in TCSGE was bad/offset in MfgPg 4 was wrong */
#define IOP_LOGINFO_CODE_FWUPLOAD_ENTIRE_FLASH_UPLOAD_FAILED (0x0003E003) /* Error occured while attempting to upload the entire flash */
#define IOP_LOGINFO_CODE_FWUPLOAD_REGION_UPLOAD_FAILED (0x0003E004) /* Error occured while attempting to upload single flash region */
#define IOP_LOGINFO_CODE_FWUPLOAD_DMA_FAILURE (0x0003E005) /* Problem occured while DMAing FW to host memory */
#define IOP_LOGINFO_CODE_DIAG_MSG_ERROR (0x00040000) /* Error handling diag msg - or'd with diag status */
#define IOP_LOGINFO_CODE_TASK_TERMINATED (0x00050000)
#define IOP_LOGINFO_CODE_ENCL_MGMT_READ_ACTION_ERR0R (0x00060001) /* Read Action not supported for SEP msg */
#define IOP_LOGINFO_CODE_ENCL_MGMT_INVALID_BUS_ID_ERR0R (0x00060002) /* Invalid Bus/ID in SEP msg */
#define IOP_LOGINFO_CODE_TARGET_ASSIST_TERMINATED (0x00070001)
#define IOP_LOGINFO_CODE_TARGET_STATUS_SEND_TERMINATED (0x00070002)
#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_ALL_IO (0x00070003)
#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO (0x00070004)
#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO_REQ (0x00070005)
#define IOP_LOGINFO_CODE_LOG_TIMESTAMP_EVENT (0x00080000)
/****************************************************************************/
/* PL LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = PL */
/****************************************************************************/
#define PL_LOGINFO_CODE_OPEN_FAILURE (0x00010000) /* see SUB_CODE_OPEN_FAIL_ below */
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_NO_DEST_TIME_OUT (0x00000001)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_PATHWAY_BLOCKED (0x00000002)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RES_CONTINUE0 (0x00000003)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RES_CONTINUE1 (0x00000004)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RES_INITIALIZE0 (0x00000005)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RES_INITIALIZE1 (0x00000006)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RES_STOP0 (0x00000007)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RES_STOP1 (0x00000008)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RETRY (0x00000009)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_BREAK (0x0000000A)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_UNUSED_0B (0x0000000B)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_OPEN_TIMEOUT_EXP (0x0000000C)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_UNUSED_0D (0x0000000D)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_DVTBLE_ACCSS_FAIL (0x0000000E)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_BAD_DEST (0x00000011)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RATE_NOT_SUPP (0x00000012)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_PROT_NOT_SUPP (0x00000013)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RESERVED_ABANDON0 (0x00000014)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RESERVED_ABANDON1 (0x00000015)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RESERVED_ABANDON2 (0x00000016)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RESERVED_ABANDON3 (0x00000017)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_STP_RESOURCES_BSY (0x00000018)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_WRONG_DESTINATION (0x00000019)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_PATH_BLOCKED (0x0000001B) /* Retry Timeout */
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_AWT_MAXED (0x0000001C) /* Retry Timeout */
#define PL_LOGINFO_CODE_INVALID_SGL (0x00020000)
#define PL_LOGINFO_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00030000)
#define PL_LOGINFO_CODE_FRAME_XFER_ERROR (0x00040000)
#define PL_LOGINFO_CODE_TX_FM_CONNECTED_LOW (0x00050000)
#define PL_LOGINFO_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET (0x00060000)
#define PL_LOGINFO_CODE_SATA_READ_LOG_RECEIVE_DATA_ERR (0x00070000)
#define PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR (0x00080000)
#define PL_LOGINFO_CODE_SATA_ERR_IN_RCV_SET_DEV_BIT_FIS (0x00090000)
#define PL_LOGINFO_CODE_RX_FM_INVALID_MESSAGE (0x000A0000)
#define PL_LOGINFO_CODE_RX_CTX_MESSAGE_VALID_ERROR (0x000B0000)
#define PL_LOGINFO_CODE_RX_FM_CURRENT_FRAME_ERROR (0x000C0000)
#define PL_LOGINFO_CODE_SATA_LINK_DOWN (0x000D0000)
#define PL_LOGINFO_CODE_DISCOVERY_SATA_INIT_W_IOS (0x000E0000)
#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE (0x000F0000)
#define PL_LOGINFO_CODE_CONFIG_PL_NOT_INITIALIZED (0x000F0001) /* PL not yet initialized, can't do config page req. */
#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT (0x000F0100) /* Invalid Page Type */
#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NUM_PHYS (0x000F0200) /* Invalid Number of Phys */
#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NOT_IMP (0x000F0300) /* Case Not Handled */
#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_DEV (0x000F0400) /* No Device Found */
#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_FORM (0x000F0500) /* Invalid FORM */
#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PHY (0x000F0600) /* Invalid Phy */
#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_OWNER (0x000F0700) /* No Owner Found */
#define PL_LOGINFO_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00100000)
#define PL_LOGINFO_CODE_RESET (0x00110000) /* See Sub-Codes below (PL_LOGINFO_SUB_CODE) */
#define PL_LOGINFO_CODE_ABORT (0x00120000) /* See Sub-Codes below (PL_LOGINFO_SUB_CODE)*/
#define PL_LOGINFO_CODE_IO_NOT_YET_EXECUTED (0x00130000)
#define PL_LOGINFO_CODE_IO_EXECUTED (0x00140000)
#define PL_LOGINFO_CODE_PERS_RESV_OUT_NOT_AFFIL_OWNER (0x00150000)
#define PL_LOGINFO_CODE_OPEN_TXDMA_ABORT (0x00160000)
#define PL_LOGINFO_CODE_IO_DEVICE_MISSING_DELAY_RETRY (0x00170000)
#define PL_LOGINFO_CODE_IO_CANCELLED_DUE_TO_R_ERR (0x00180000)
#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE (0x00000100)
#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_NO_DEST_TIMEOUT (0x00000101)
#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_SATA_NEG_RATE_2HI (0x00000102)
#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_RATE_NOT_SUPPORTED (0x00000103)
#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_BREAK (0x00000104)
#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ZONE_VIOLATION (0x00000114)
#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ABANDON0 (0x00000114) /* Open Reject (Zone Violation) - available on SAS-2 devices */
#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ABANDON1 (0x00000115)
#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ABANDON2 (0x00000116)
#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ABANDON3 (0x00000117)
#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ORR_TIMEOUT (0x0000011A) /* Open Reject (Retry) Timeout */
#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_PATH_BLOCKED (0x0000011B)
#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_AWT_MAXED (0x0000011C) /* Arbitration Wait Timer Maxed */
#define PL_LOGINFO_SUB_CODE_TARGET_BUS_RESET (0x00000120)
#define PL_LOGINFO_SUB_CODE_TRANSPORT_LAYER (0x00000130) /* Leave lower nibble (1-f) reserved. */
#define PL_LOGINFO_SUB_CODE_PORT_LAYER (0x00000140) /* Leave lower nibble (1-f) reserved. */
#define PL_LOGINFO_SUB_CODE_INVALID_SGL (0x00000200)
#define PL_LOGINFO_SUB_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00000300)
#define PL_LOGINFO_SUB_CODE_FRAME_XFER_ERROR (0x00000400)
/* Bits 0-3 encode Transport Status Register (offset 0x08) */
/* Bit 0 is Status Bit 0: FrameXferErr */
/* Bit 1 & 2 are Status Bits 16 and 17: FrameXmitErrStatus */
/* Bit 3 is Status Bit 18 WriteDataLenghtGTDataLengthErr */
#define PL_LOGINFO_SUB_CODE_TX_FM_CONNECTED_LOW (0x00000500)
#define PL_LOGINFO_SUB_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET (0x00000600)
#define PL_LOGINFO_SUB_CODE_SATA_READ_LOG_RECEIVE_DATA_ERR (0x00000700)
#define PL_LOGINFO_SUB_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR (0x00000800)
#define PL_LOGINFO_SUB_CODE_SATA_ERR_IN_RCV_SET_DEV_BIT_FIS (0x00000900)
#define PL_LOGINFO_SUB_CODE_RX_FM_INVALID_MESSAGE (0x00000A00)
#define PL_LOGINFO_SUB_CODE_RX_CTX_MESSAGE_VALID_ERROR (0x00000B00)
#define PL_LOGINFO_SUB_CODE_RX_FM_CURRENT_FRAME_ERROR (0x00000C00)
#define PL_LOGINFO_SUB_CODE_SATA_LINK_DOWN (0x00000D00)
#define PL_LOGINFO_SUB_CODE_DISCOVERY_SATA_INIT_W_IOS (0x00000E00)
#define PL_LOGINFO_SUB_CODE_DISCOVERY_REMOTE_SEP_RESET (0x00000E01)
#define PL_LOGINFO_SUB_CODE_SECOND_OPEN (0x00000F00)
#define PL_LOGINFO_SUB_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00001000)
#define PL_LOGINFO_SUB_CODE_BREAK_ON_SATA_CONNECTION (0x00002000)
/* not currently used in mainline */
#define PL_LOGINFO_SUB_CODE_BREAK_ON_STUCK_LINK (0x00003000)
#define PL_LOGINFO_SUB_CODE_BREAK_ON_STUCK_LINK_AIP (0x00004000)
#define PL_LOGINFO_SUB_CODE_BREAK_ON_INCOMPLETE_BREAK_RCVD (0x00005000)
#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_FAILURE (0x00200000) /* Can't get SMP Frame */
#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR (0x00200010) /* Error occured on SMP Read */
#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR (0x00200020) /* Error occured on SMP Write */
#define PL_LOGINFO_CODE_ENCL_MGMT_NOT_SUPPORTED_ON_ENCL (0x00200040) /* Encl Mgmt services not available for this WWID */
#define PL_LOGINFO_CODE_ENCL_MGMT_ADDR_MODE_NOT_SUPPORTED (0x00200050) /* Address Mode not suppored */
#define PL_LOGINFO_CODE_ENCL_MGMT_BAD_SLOT_NUM (0x00200060) /* Invalid Slot Number in SEP Msg */
#define PL_LOGINFO_CODE_ENCL_MGMT_SGPIO_NOT_PRESENT (0x00200070) /* SGPIO not present/enabled */
#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_NOT_CONFIGURED (0x00200080) /* GPIO not configured */
#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_FRAME_ERROR (0x00200090) /* GPIO can't allocate a frame */
#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_CONFIG_PAGE_ERROR (0x002000A0) /* GPIO failed config page request */
#define PL_LOGINFO_CODE_ENCL_MGMT_SES_FRAME_ALLOC_ERROR (0x002000B0) /* Can't get frame for SES command */
#define PL_LOGINFO_CODE_ENCL_MGMT_SES_IO_ERROR (0x002000C0) /* I/O execution error */
#define PL_LOGINFO_CODE_ENCL_MGMT_SES_RETRIES_EXHAUSTED (0x002000D0) /* SEP I/O retries exhausted */
#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_ALLOC_ERROR (0x002000E0) /* Can't get frame for SMP command */
#define PL_LOGINFO_DA_SEP_NOT_PRESENT (0x00200100) /* SEP not present when msg received */
#define PL_LOGINFO_DA_SEP_SINGLE_THREAD_ERROR (0x00200101) /* Can only accept 1 msg at a time */
#define PL_LOGINFO_DA_SEP_ISTWI_INTR_IN_IDLE_STATE (0x00200102) /* ISTWI interrupt recvd. while IDLE */
#define PL_LOGINFO_DA_SEP_RECEIVED_NACK_FROM_SLAVE (0x00200103) /* SEP NACK'd, it is busy */
#define PL_LOGINFO_DA_SEP_DID_NOT_RECEIVE_ACK (0x00200104) /* SEP didn't rcv. ACK (Last Rcvd Bit = 1) */
#define PL_LOGINFO_DA_SEP_BAD_STATUS_HDR_CHKSUM (0x00200105) /* SEP stopped or sent bad chksum in Hdr */
#define PL_LOGINFO_DA_SEP_STOP_ON_DATA (0x00200106) /* SEP stopped while transfering data */
#define PL_LOGINFO_DA_SEP_STOP_ON_SENSE_DATA (0x00200107) /* SEP stopped while transfering sense data */
#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_1 (0x00200108) /* SEP returned unknown scsi status */
#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_2 (0x00200109) /* SEP returned unknown scsi status */
#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP (0x0020010A) /* SEP returned bad chksum after STOP */
#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP_GETDATA (0x0020010B) /* SEP returned bad chksum after STOP while gettin data*/
#define PL_LOGINFO_DA_SEP_UNSUPPORTED_COMMAND (0x0020010C) /* SEP doesn't support CDB opcode f/w location 1 */
#define PL_LOGINFO_DA_SEP_UNSUPPORTED_COMMAND_2 (0x0020010D) /* SEP doesn't support CDB opcode f/w location 2 */
#define PL_LOGINFO_DA_SEP_UNSUPPORTED_COMMAND_3 (0x0020010E) /* SEP doesn't support CDB opcode f/w location 3 */
/****************************************************************************/
/* IR LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = IR */
/****************************************************************************/
#define IR_LOGINFO_RAID_ACTION_ERROR (0x00010000)
#define IR_LOGINFO_CODE_UNUSED2 (0x00020000)
/* Amount of information passed down for Create Volume is too large */
#define IR_LOGINFO_VOLUME_CREATE_INVALID_LENGTH (0x00010001)
/* Creation of duplicate volume attempted (Bus/Target ID checked) */
#define IR_LOGINFO_VOLUME_CREATE_DUPLICATE (0x00010002)
/* Creation failed due to maximum number of supported volumes exceeded */
#define IR_LOGINFO_VOLUME_CREATE_NO_SLOTS (0x00010003)
/* Creation failed due to DMA error in trying to read from host */
#define IR_LOGINFO_VOLUME_CREATE_DMA_ERROR (0x00010004)
/* Creation failed due to invalid volume type passed down */
#define IR_LOGINFO_VOLUME_CREATE_INVALID_VOLUME_TYPE (0x00010005)
/* Creation failed due to error reading MFG Page 4 */
#define IR_LOGINFO_VOLUME_MFG_PAGE4_ERROR (0x00010006)
/* Creation failed when trying to create internal structures */
#define IR_LOGINFO_VOLUME_INTERNAL_CONFIG_STRUCTURE_ERROR (0x00010007)
/* Activation failed due to trying to activate an already active volume */
#define IR_LOGINFO_VOLUME_ACTIVATING_AN_ACTIVE_VOLUME (0x00010010)
/* Activation failed due to trying to active unsupported volume type */
#define IR_LOGINFO_VOLUME_ACTIVATING_INVALID_VOLUME_TYPE (0x00010011)
/* Activation failed due to trying to active too many volumes */
#define IR_LOGINFO_VOLUME_ACTIVATING_TOO_MANY_VOLUMES (0x00010012)
/* Activation failed due to Volume ID in use already */
#define IR_LOGINFO_VOLUME_ACTIVATING_VOLUME_ID_IN_USE (0x00010013)
/* Activation failed call to activateVolume returned failure */
#define IR_LOGINFO_VOLUME_ACTIVATE_VOLUME_FAILED (0x00010014)
/* Activation failed trying to import the volume */
#define IR_LOGINFO_VOLUME_ACTIVATING_IMPORT_VOLUME_FAILED (0x00010015)
/* Activation failed trying to import the volume */
#define IR_LOGINFO_VOLUME_ACTIVATING_TOO_MANY_PHYS_DISKS (0x00010016)
/* Phys Disk failed, too many phys disks */
#define IR_LOGINFO_PHYSDISK_CREATE_TOO_MANY_DISKS (0x00010020)
/* Amount of information passed down for Create Pnysdisk is too large */
#define IR_LOGINFO_PHYSDISK_CREATE_INVALID_LENGTH (0x00010021)
/* Creation failed due to DMA error in trying to read from host */
#define IR_LOGINFO_PHYSDISK_CREATE_DMA_ERROR (0x00010022)
/* Creation failed due to invalid Bus TargetID passed down */
#define IR_LOGINFO_PHYSDISK_CREATE_BUS_TID_INVALID (0x00010023)
/* Creation failed due to error in creating RAID Phys Disk Config Page */
#define IR_LOGINFO_PHYSDISK_CREATE_CONFIG_PAGE_ERROR (0x00010024)
/* Compatibility Error : IR Disabled */
#define IR_LOGINFO_COMPAT_ERROR_RAID_DISABLED (0x00010030)
/* Compatibility Error : Inquiry Comand failed */
#define IR_LOGINFO_COMPAT_ERROR_INQUIRY_FAILED (0x00010031)
/* Compatibility Error : Device not direct access device */
#define IR_LOGINFO_COMPAT_ERROR_NOT_DIRECT_ACCESS (0x00010032)
/* Compatibility Error : Removable device found */
#define IR_LOGINFO_COMPAT_ERROR_REMOVABLE_FOUND (0x00010033)
/* Compatibility Error : Device SCSI Version not 2 or higher */
#define IR_LOGINFO_COMPAT_ERROR_NEED_SCSI_2_OR_HIGHER (0x00010034)
/* Compatibility Error : SATA device, 48 BIT LBA not supported */
#define IR_LOGINFO_COMPAT_ERROR_SATA_48BIT_LBA_NOT_SUPPORTED (0x00010035)
/* Compatibility Error : Device does not have 512 byte block sizes */
#define IR_LOGINFO_COMPAT_ERROR_DEVICE_NOT_512_BYTE_BLOCK (0x00010036)
/* Compatibility Error : Volume Type check failed */
#define IR_LOGINFO_COMPAT_ERROR_VOLUME_TYPE_CHECK_FAILED (0x00010037)
/* Compatibility Error : Volume Type is unsupported by FW */
#define IR_LOGINFO_COMPAT_ERROR_UNSUPPORTED_VOLUME_TYPE (0x00010038)
/* Compatibility Error : Disk drive too small for use in volume */
#define IR_LOGINFO_COMPAT_ERROR_DISK_TOO_SMALL (0x00010039)
/* Compatibility Error : Phys disk for Create Volume not found */
#define IR_LOGINFO_COMPAT_ERROR_PHYS_DISK_NOT_FOUND (0x0001003A)
/* Compatibility Error : membership count error, too many or too few disks for volume type */
#define IR_LOGINFO_COMPAT_ERROR_MEMBERSHIP_COUNT (0x0001003B)
/* Compatibility Error : Disk stripe sizes must be 64KB */
#define IR_LOGINFO_COMPAT_ERROR_NON_64K_STRIPE_SIZE (0x0001003C)
/* Compatibility Error : IME size limited to < 2TB */
#define IR_LOGINFO_COMPAT_ERROR_IME_VOL_NOT_CURRENTLY_SUPPORTED (0x0001003D)
/* Device Firmware Update: DFU can only be started once */
#define IR_LOGINFO_DEV_FW_UPDATE_ERR_DFU_IN_PROGRESS (0x00010050)
/* Device Firmware Update: Volume must be Optimal/Active/non-Quiesced */
#define IR_LOGINFO_DEV_FW_UPDATE_ERR_DEVICE_IN_INVALID_STATE (0x00010051)
/* Device Firmware Update: DFU Timeout cannot be zero */
#define IR_LOGINFO_DEV_FW_UPDATE_ERR_INVALID_TIMEOUT (0x00010052)
/* Device Firmware Update: CREATE TIMER FAILED */
#define IR_LOGINFO_DEV_FW_UPDATE_ERR_NO_TIMERS (0x00010053)
/* Device Firmware Update: Failed to read SAS_IO_UNIT_PG_1 */
#define IR_LOGINFO_DEV_FW_UPDATE_ERR_READING_CFG_PAGE (0x00010054)
/* Device Firmware Update: Invalid SAS_IO_UNIT_PG_1 value(s) */
#define IR_LOGINFO_DEV_FW_UPDATE_ERR_PORT_IO_TIMEOUTS_REQUIRED (0x00010055)
/* Device Firmware Update: Unable to allocate memory for page */
#define IR_LOGINFO_DEV_FW_UPDATE_ERR_ALLOC_CFG_PAGE (0x00010056)
/****************************************************************************/
/* Defines for convenience */
/****************************************************************************/
#define IOC_LOGINFO_PREFIX_IOP ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_IOP)
#define IOC_LOGINFO_PREFIX_PL ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_PL)
#define IOC_LOGINFO_PREFIX_IR ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_IR)
#endif /* end of file */

259
kernel/drivers/message/fusion/lsi/mpi_raid.h Normal file
View File

@@ -0,0 +1,259 @@
/*
* Copyright (c) 2001-2008 LSI Corporation.
*
*
* Name: mpi_raid.h
* Title: MPI RAID message and structures
* Creation Date: February 27, 2001
*
* mpi_raid.h Version: 01.05.05
*
* Version History
* ---------------
*
* Date Version Description
* -------- -------- ------------------------------------------------------
* 02-27-01 01.01.01 Original release for this file.
* 03-27-01 01.01.02 Added structure offset comments.
* 08-08-01 01.02.01 Original release for v1.2 work.
* 09-28-01 01.02.02 Major rework for MPI v1.2 Integrated RAID changes.
* 10-04-01 01.02.03 Added ActionData defines for
* MPI_RAID_ACTION_DELETE_VOLUME action.
* 11-01-01 01.02.04 Added define for MPI_RAID_ACTION_ADATA_DO_NOT_SYNC.
* 03-14-02 01.02.05 Added define for MPI_RAID_ACTION_ADATA_LOW_LEVEL_INIT.
* 05-07-02 01.02.06 Added define for MPI_RAID_ACTION_ACTIVATE_VOLUME,
* MPI_RAID_ACTION_INACTIVATE_VOLUME, and
* MPI_RAID_ACTION_ADATA_INACTIVATE_ALL.
* 07-12-02 01.02.07 Added structures for Mailbox request and reply.
* 11-15-02 01.02.08 Added missing MsgContext field to MSG_MAILBOX_REQUEST.
* 04-01-03 01.02.09 New action data option flag for
* MPI_RAID_ACTION_DELETE_VOLUME.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Original release for MPI v1.5.
* 01-15-05 01.05.02 Added defines for the two new RAID Actions for
* _SET_RESYNC_RATE and _SET_DATA_SCRUB_RATE.
* 02-28-07 01.05.03 Added new RAID Action, Device FW Update Mode, and
* associated defines.
* 08-07-07 01.05.04 Added Disable Full Rebuild bit to the ActionDataWord
* for the RAID Action MPI_RAID_ACTION_DISABLE_VOLUME.
* 01-15-08 01.05.05 Added define for MPI_RAID_ACTION_SET_VOLUME_NAME.
* --------------------------------------------------------------------------
*/
#ifndef MPI_RAID_H
#define MPI_RAID_H
/******************************************************************************
*
* R A I D M e s s a g e s
*
*******************************************************************************/
/****************************************************************************/
/* RAID Action Request */
/****************************************************************************/
typedef struct _MSG_RAID_ACTION
{
U8 Action; /* 00h */
U8 Reserved1; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U8 VolumeID; /* 04h */
U8 VolumeBus; /* 05h */
U8 PhysDiskNum; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U32 Reserved2; /* 0Ch */
U32 ActionDataWord; /* 10h */
SGE_SIMPLE_UNION ActionDataSGE; /* 14h */
} MSG_RAID_ACTION_REQUEST, MPI_POINTER PTR_MSG_RAID_ACTION_REQUEST,
MpiRaidActionRequest_t , MPI_POINTER pMpiRaidActionRequest_t;
/* RAID Action request Action values */
#define MPI_RAID_ACTION_STATUS (0x00)
#define MPI_RAID_ACTION_INDICATOR_STRUCT (0x01)
#define MPI_RAID_ACTION_CREATE_VOLUME (0x02)
#define MPI_RAID_ACTION_DELETE_VOLUME (0x03)
#define MPI_RAID_ACTION_DISABLE_VOLUME (0x04)
#define MPI_RAID_ACTION_ENABLE_VOLUME (0x05)
#define MPI_RAID_ACTION_QUIESCE_PHYS_IO (0x06)
#define MPI_RAID_ACTION_ENABLE_PHYS_IO (0x07)
#define MPI_RAID_ACTION_CHANGE_VOLUME_SETTINGS (0x08)
#define MPI_RAID_ACTION_PHYSDISK_OFFLINE (0x0A)
#define MPI_RAID_ACTION_PHYSDISK_ONLINE (0x0B)
#define MPI_RAID_ACTION_CHANGE_PHYSDISK_SETTINGS (0x0C)
#define MPI_RAID_ACTION_CREATE_PHYSDISK (0x0D)
#define MPI_RAID_ACTION_DELETE_PHYSDISK (0x0E)
#define MPI_RAID_ACTION_FAIL_PHYSDISK (0x0F)
#define MPI_RAID_ACTION_REPLACE_PHYSDISK (0x10)
#define MPI_RAID_ACTION_ACTIVATE_VOLUME (0x11)
#define MPI_RAID_ACTION_INACTIVATE_VOLUME (0x12)
#define MPI_RAID_ACTION_SET_RESYNC_RATE (0x13)
#define MPI_RAID_ACTION_SET_DATA_SCRUB_RATE (0x14)
#define MPI_RAID_ACTION_DEVICE_FW_UPDATE_MODE (0x15)
#define MPI_RAID_ACTION_SET_VOLUME_NAME (0x16)
/* ActionDataWord defines for use with MPI_RAID_ACTION_CREATE_VOLUME action */
#define MPI_RAID_ACTION_ADATA_DO_NOT_SYNC (0x00000001)
#define MPI_RAID_ACTION_ADATA_LOW_LEVEL_INIT (0x00000002)
/* ActionDataWord defines for use with MPI_RAID_ACTION_DELETE_VOLUME action */
#define MPI_RAID_ACTION_ADATA_KEEP_PHYS_DISKS (0x00000000)
#define MPI_RAID_ACTION_ADATA_DEL_PHYS_DISKS (0x00000001)
#define MPI_RAID_ACTION_ADATA_KEEP_LBA0 (0x00000000)
#define MPI_RAID_ACTION_ADATA_ZERO_LBA0 (0x00000002)
/* ActionDataWord defines for use with MPI_RAID_ACTION_DISABLE_VOLUME action */
#define MPI_RAID_ACTION_ADATA_DISABLE_FULL_REBUILD (0x00000001)
/* ActionDataWord defines for use with MPI_RAID_ACTION_ACTIVATE_VOLUME action */
#define MPI_RAID_ACTION_ADATA_INACTIVATE_ALL (0x00000001)
/* ActionDataWord defines for use with MPI_RAID_ACTION_SET_RESYNC_RATE action */
#define MPI_RAID_ACTION_ADATA_RESYNC_RATE_MASK (0x000000FF)
/* ActionDataWord defines for use with MPI_RAID_ACTION_SET_DATA_SCRUB_RATE action */
#define MPI_RAID_ACTION_ADATA_DATA_SCRUB_RATE_MASK (0x000000FF)
/* ActionDataWord defines for use with MPI_RAID_ACTION_DEVICE_FW_UPDATE_MODE action */
#define MPI_RAID_ACTION_ADATA_ENABLE_FW_UPDATE (0x00000001)
#define MPI_RAID_ACTION_ADATA_MASK_FW_UPDATE_TIMEOUT (0x0000FF00)
#define MPI_RAID_ACTION_ADATA_SHIFT_FW_UPDATE_TIMEOUT (8)
/* RAID Action reply message */
typedef struct _MSG_RAID_ACTION_REPLY
{
U8 Action; /* 00h */
U8 Reserved; /* 01h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U8 VolumeID; /* 04h */
U8 VolumeBus; /* 05h */
U8 PhysDiskNum; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U16 ActionStatus; /* 0Ch */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U32 VolumeStatus; /* 14h */
U32 ActionData; /* 18h */
} MSG_RAID_ACTION_REPLY, MPI_POINTER PTR_MSG_RAID_ACTION_REPLY,
MpiRaidActionReply_t, MPI_POINTER pMpiRaidActionReply_t;
/* RAID Volume reply ActionStatus values */
#define MPI_RAID_ACTION_ASTATUS_SUCCESS (0x0000)
#define MPI_RAID_ACTION_ASTATUS_INVALID_ACTION (0x0001)
#define MPI_RAID_ACTION_ASTATUS_FAILURE (0x0002)
#define MPI_RAID_ACTION_ASTATUS_IN_PROGRESS (0x0003)
/* RAID Volume reply RAID Volume Indicator structure */
typedef struct _MPI_RAID_VOL_INDICATOR
{
U64 TotalBlocks; /* 00h */
U64 BlocksRemaining; /* 08h */
} MPI_RAID_VOL_INDICATOR, MPI_POINTER PTR_MPI_RAID_VOL_INDICATOR,
MpiRaidVolIndicator_t, MPI_POINTER pMpiRaidVolIndicator_t;
/****************************************************************************/
/* SCSI IO RAID Passthrough Request */
/****************************************************************************/
typedef struct _MSG_SCSI_IO_RAID_PT_REQUEST
{
U8 PhysDiskNum; /* 00h */
U8 Reserved1; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U8 CDBLength; /* 04h */
U8 SenseBufferLength; /* 05h */
U8 Reserved2; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 LUN[8]; /* 0Ch */
U32 Control; /* 14h */
U8 CDB[16]; /* 18h */
U32 DataLength; /* 28h */
U32 SenseBufferLowAddr; /* 2Ch */
SGE_IO_UNION SGL; /* 30h */
} MSG_SCSI_IO_RAID_PT_REQUEST, MPI_POINTER PTR_MSG_SCSI_IO_RAID_PT_REQUEST,
SCSIIORaidPassthroughRequest_t, MPI_POINTER pSCSIIORaidPassthroughRequest_t;
/* SCSI IO RAID Passthrough reply structure */
typedef struct _MSG_SCSI_IO_RAID_PT_REPLY
{
U8 PhysDiskNum; /* 00h */
U8 Reserved1; /* 01h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U8 CDBLength; /* 04h */
U8 SenseBufferLength; /* 05h */
U8 Reserved2; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 SCSIStatus; /* 0Ch */
U8 SCSIState; /* 0Dh */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U32 TransferCount; /* 14h */
U32 SenseCount; /* 18h */
U32 ResponseInfo; /* 1Ch */
} MSG_SCSI_IO_RAID_PT_REPLY, MPI_POINTER PTR_MSG_SCSI_IO_RAID_PT_REPLY,
SCSIIORaidPassthroughReply_t, MPI_POINTER pSCSIIORaidPassthroughReply_t;
/****************************************************************************/
/* Mailbox reqeust structure */
/****************************************************************************/
typedef struct _MSG_MAILBOX_REQUEST
{
U16 Reserved1;
U8 ChainOffset;
U8 Function;
U16 Reserved2;
U8 Reserved3;
U8 MsgFlags;
U32 MsgContext;
U8 Command[10];
U16 Reserved4;
SGE_IO_UNION SGL;
} MSG_MAILBOX_REQUEST, MPI_POINTER PTR_MSG_MAILBOX_REQUEST,
MailboxRequest_t, MPI_POINTER pMailboxRequest_t;
/* Mailbox reply structure */
typedef struct _MSG_MAILBOX_REPLY
{
U16 Reserved1; /* 00h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U16 Reserved2; /* 04h */
U8 Reserved3; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U16 MailboxStatus; /* 0Ch */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U32 Reserved4; /* 14h */
} MSG_MAILBOX_REPLY, MPI_POINTER PTR_MSG_MAILBOX_REPLY,
MailboxReply_t, MPI_POINTER pMailboxReply_t;
#endif

278
kernel/drivers/message/fusion/lsi/mpi_sas.h Normal file
View File

@@ -0,0 +1,278 @@
/*
* Copyright (c) 2004-2008 LSI Corporation.
*
*
* Name: mpi_sas.h
* Title: MPI Serial Attached SCSI structures and definitions
* Creation Date: August 19, 2004
*
* mpi_sas.h Version: 01.05.05
*
* Version History
* ---------------
*
* Date Version Description
* -------- -------- ------------------------------------------------------
* 08-19-04 01.05.01 Original release.
* 08-30-05 01.05.02 Added DeviceInfo bit for SEP.
* Added PrimFlags and Primitive field to SAS IO Unit
* Control request, and added a new operation code.
* 03-27-06 01.05.03 Added Force Full Discovery, Transmit Port Select Signal,
* and Remove Device operations to SAS IO Unit Control.
* Added DevHandle field to SAS IO Unit Control request and
* reply.
* 10-11-06 01.05.04 Fixed the name of a define for Operation field of SAS IO
* Unit Control request.
* 01-15-08 01.05.05 Added support for MPI_SAS_OP_SET_IOC_PARAMETER,
* including adding IOCParameter and IOCParameter value
* fields to SAS IO Unit Control Request.
* Added MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC define.
* --------------------------------------------------------------------------
*/
#ifndef MPI_SAS_H
#define MPI_SAS_H
/*
* Values for SASStatus.
*/
#define MPI_SASSTATUS_SUCCESS (0x00)
#define MPI_SASSTATUS_UNKNOWN_ERROR (0x01)
#define MPI_SASSTATUS_INVALID_FRAME (0x02)
#define MPI_SASSTATUS_UTC_BAD_DEST (0x03)
#define MPI_SASSTATUS_UTC_BREAK_RECEIVED (0x04)
#define MPI_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05)
#define MPI_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06)
#define MPI_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07)
#define MPI_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08)
#define MPI_SASSTATUS_UTC_WRONG_DESTINATION (0x09)
#define MPI_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A)
#define MPI_SASSTATUS_LONG_INFORMATION_UNIT (0x0B)
#define MPI_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C)
#define MPI_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D)
#define MPI_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E)
#define MPI_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F)
#define MPI_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10)
#define MPI_SASSTATUS_DATA_OFFSET_ERROR (0x11)
#define MPI_SASSTATUS_SDSF_NAK_RECEIVED (0x12)
#define MPI_SASSTATUS_SDSF_CONNECTION_FAILED (0x13)
#define MPI_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14)
/*
* Values for the SAS DeviceInfo field used in SAS Device Status Change Event
* data and SAS IO Unit Configuration pages.
*/
#define MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC (0xF0000000)
#define MPI_SAS_DEVICE_INFO_SEP (0x00004000)
#define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000)
#define MPI_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000)
#define MPI_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800)
#define MPI_SAS_DEVICE_INFO_SSP_TARGET (0x00000400)
#define MPI_SAS_DEVICE_INFO_STP_TARGET (0x00000200)
#define MPI_SAS_DEVICE_INFO_SMP_TARGET (0x00000100)
#define MPI_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080)
#define MPI_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040)
#define MPI_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020)
#define MPI_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010)
#define MPI_SAS_DEVICE_INFO_SATA_HOST (0x00000008)
#define MPI_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007)
#define MPI_SAS_DEVICE_INFO_NO_DEVICE (0x00000000)
#define MPI_SAS_DEVICE_INFO_END_DEVICE (0x00000001)
#define MPI_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002)
#define MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003)
/*****************************************************************************
*
* S e r i a l A t t a c h e d S C S I M e s s a g e s
*
*****************************************************************************/
/****************************************************************************/
/* Serial Management Protocol Passthrough Request */
/****************************************************************************/
typedef struct _MSG_SMP_PASSTHROUGH_REQUEST
{
U8 PassthroughFlags; /* 00h */
U8 PhysicalPort; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 RequestDataLength; /* 04h */
U8 ConnectionRate; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U32 Reserved1; /* 0Ch */
U64 SASAddress; /* 10h */
U32 Reserved2; /* 18h */
U32 Reserved3; /* 1Ch */
SGE_SIMPLE_UNION SGL; /* 20h */
} MSG_SMP_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REQUEST,
SmpPassthroughRequest_t, MPI_POINTER pSmpPassthroughRequest_t;
/* values for PassthroughFlags field */
#define MPI_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80)
/* values for ConnectionRate field */
#define MPI_SMP_PT_REQ_CONNECT_RATE_NEGOTIATED (0x00)
#define MPI_SMP_PT_REQ_CONNECT_RATE_1_5 (0x08)
#define MPI_SMP_PT_REQ_CONNECT_RATE_3_0 (0x09)
/* Serial Management Protocol Passthrough Reply */
typedef struct _MSG_SMP_PASSTHROUGH_REPLY
{
U8 PassthroughFlags; /* 00h */
U8 PhysicalPort; /* 01h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U16 ResponseDataLength; /* 04h */
U8 Reserved1; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 Reserved2; /* 0Ch */
U8 SASStatus; /* 0Dh */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U32 Reserved3; /* 14h */
U8 ResponseData[4]; /* 18h */
} MSG_SMP_PASSTHROUGH_REPLY, MPI_POINTER PTR_MSG_SMP_PASSTHROUGH_REPLY,
SmpPassthroughReply_t, MPI_POINTER pSmpPassthroughReply_t;
#define MPI_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE (0x80)
/****************************************************************************/
/* SATA Passthrough Request */
/****************************************************************************/
typedef struct _MSG_SATA_PASSTHROUGH_REQUEST
{
U8 TargetID; /* 00h */
U8 Bus; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 PassthroughFlags; /* 04h */
U8 ConnectionRate; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U32 Reserved1; /* 0Ch */
U32 Reserved2; /* 10h */
U32 Reserved3; /* 14h */
U32 DataLength; /* 18h */
U8 CommandFIS[20]; /* 1Ch */
SGE_SIMPLE_UNION SGL; /* 30h */
} MSG_SATA_PASSTHROUGH_REQUEST, MPI_POINTER PTR_MSG_SATA_PASSTHROUGH_REQUEST,
SataPassthroughRequest_t, MPI_POINTER pSataPassthroughRequest_t;
/* values for PassthroughFlags field */
#define MPI_SATA_PT_REQ_PT_FLAGS_RESET_DEVICE (0x0200)
#define MPI_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG (0x0100)
#define MPI_SATA_PT_REQ_PT_FLAGS_DMA_QUEUED (0x0080)
#define MPI_SATA_PT_REQ_PT_FLAGS_PACKET_COMMAND (0x0040)
#define MPI_SATA_PT_REQ_PT_FLAGS_DMA (0x0020)
#define MPI_SATA_PT_REQ_PT_FLAGS_PIO (0x0010)
#define MPI_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004)
#define MPI_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002)
#define MPI_SATA_PT_REQ_PT_FLAGS_READ (0x0001)
/* values for ConnectionRate field */
#define MPI_SATA_PT_REQ_CONNECT_RATE_NEGOTIATED (0x00)
#define MPI_SATA_PT_REQ_CONNECT_RATE_1_5 (0x08)
#define MPI_SATA_PT_REQ_CONNECT_RATE_3_0 (0x09)
/* SATA Passthrough Reply */
typedef struct _MSG_SATA_PASSTHROUGH_REPLY
{
U8 TargetID; /* 00h */
U8 Bus; /* 01h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U16 PassthroughFlags; /* 04h */
U8 Reserved1; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 Reserved2; /* 0Ch */
U8 SASStatus; /* 0Dh */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U8 StatusFIS[20]; /* 14h */
U32 StatusControlRegisters; /* 28h */
U32 TransferCount; /* 2Ch */
} MSG_SATA_PASSTHROUGH_REPLY, MPI_POINTER PTR_MSG_SATA_PASSTHROUGH_REPLY,
SataPassthroughReply_t, MPI_POINTER pSataPassthroughReply_t;
/****************************************************************************/
/* SAS IO Unit Control Request */
/****************************************************************************/
typedef struct _MSG_SAS_IOUNIT_CONTROL_REQUEST
{
U8 Operation; /* 00h */
U8 Reserved1; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 DevHandle; /* 04h */
U8 IOCParameter; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 TargetID; /* 0Ch */
U8 Bus; /* 0Dh */
U8 PhyNum; /* 0Eh */
U8 PrimFlags; /* 0Fh */
U32 Primitive; /* 10h */
U64 SASAddress; /* 14h */
U32 IOCParameterValue; /* 1Ch */
} MSG_SAS_IOUNIT_CONTROL_REQUEST, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REQUEST,
SasIoUnitControlRequest_t, MPI_POINTER pSasIoUnitControlRequest_t;
/* values for the Operation field */
#define MPI_SAS_OP_CLEAR_NOT_PRESENT (0x01)
#define MPI_SAS_OP_CLEAR_ALL_PERSISTENT (0x02)
#define MPI_SAS_OP_PHY_LINK_RESET (0x06)
#define MPI_SAS_OP_PHY_HARD_RESET (0x07)
#define MPI_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08)
#define MPI_SAS_OP_MAP_CURRENT (0x09)
#define MPI_SAS_OP_SEND_PRIMITIVE (0x0A)
#define MPI_SAS_OP_FORCE_FULL_DISCOVERY (0x0B)
#define MPI_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C)
#define MPI_SAS_OP_TRANSMIT_REMOVE_DEVICE (0x0D) /* obsolete name */
#define MPI_SAS_OP_REMOVE_DEVICE (0x0D)
#define MPI_SAS_OP_SET_IOC_PARAMETER (0x0E)
#define MPI_SAS_OP_PRODUCT_SPECIFIC_MIN (0x80)
/* values for the PrimFlags field */
#define MPI_SAS_PRIMFLAGS_SINGLE (0x08)
#define MPI_SAS_PRIMFLAGS_TRIPLE (0x02)
#define MPI_SAS_PRIMFLAGS_REDUNDANT (0x01)
/* SAS IO Unit Control Reply */
typedef struct _MSG_SAS_IOUNIT_CONTROL_REPLY
{
U8 Operation; /* 00h */
U8 Reserved1; /* 01h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U16 DevHandle; /* 04h */
U8 IOCParameter; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U16 Reserved4; /* 0Ch */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
} MSG_SAS_IOUNIT_CONTROL_REPLY, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REPLY,
SasIoUnitControlReply_t, MPI_POINTER pSasIoUnitControlReply_t;
#endif

650
kernel/drivers/message/fusion/lsi/mpi_targ.h Normal file
View File

@@ -0,0 +1,650 @@
/*
* Copyright (c) 2000-2008 LSI Corporation.
*
*
* Name: mpi_targ.h
* Title: MPI Target mode messages and structures
* Creation Date: June 22, 2000
*
* mpi_targ.h Version: 01.05.06
*
* Version History
* ---------------
*
* Date Version Description
* -------- -------- ------------------------------------------------------
* 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
* 06-06-00 01.00.01 Update version number for 1.0 release.
* 06-22-00 01.00.02 Added _MSG_TARGET_CMD_BUFFER_POST_REPLY structure.
* Corrected DECSRIPTOR typo to DESCRIPTOR.
* 11-02-00 01.01.01 Original release for post 1.0 work
* Modified target mode to use IoIndex instead of
* HostIndex and IocIndex. Added Alias.
* 01-09-01 01.01.02 Added defines for TARGET_ASSIST_FLAGS_REPOST_CMD_BUFFER
* and TARGET_STATUS_SEND_FLAGS_REPOST_CMD_BUFFER.
* 02-20-01 01.01.03 Started using MPI_POINTER.
* Added structures for MPI_TARGET_SCSI_SPI_CMD_BUFFER and
* MPI_TARGET_FCP_CMD_BUFFER.
* 03-27-01 01.01.04 Added structure offset comments.
* 08-08-01 01.02.01 Original release for v1.2 work.
* 09-28-01 01.02.02 Added structure for MPI_TARGET_SCSI_SPI_STATUS_IU.
* Added PriorityReason field to some replies and
* defined more PriorityReason codes.
* Added some defines for to support previous version
* of MPI.
* 10-04-01 01.02.03 Added PriorityReason to MSG_TARGET_ERROR_REPLY.
* 11-01-01 01.02.04 Added define for TARGET_STATUS_SEND_FLAGS_HIGH_PRIORITY.
* 03-14-02 01.02.05 Modified MPI_TARGET_FCP_RSP_BUFFER to get the proper
* byte ordering.
* 05-31-02 01.02.06 Modified TARGET_MODE_REPLY_ALIAS_MASK to only include
* one bit.
* Added AliasIndex field to MPI_TARGET_FCP_CMD_BUFFER.
* 09-16-02 01.02.07 Added flags for confirmed completion.
* Added PRIORITY_REASON_TARGET_BUSY.
* 11-15-02 01.02.08 Added AliasID field to MPI_TARGET_SCSI_SPI_CMD_BUFFER.
* 04-01-03 01.02.09 Added OptionalOxid field to MPI_TARGET_FCP_CMD_BUFFER.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Added new request message structures for
* MSG_TARGET_CMD_BUF_POST_BASE_REQUEST,
* MSG_TARGET_CMD_BUF_POST_LIST_REQUEST, and
* MSG_TARGET_ASSIST_EXT_REQUEST.
* Added new structures for SAS SSP Command buffer, SSP
* Task buffer, and SSP Status IU.
* 10-05-04 01.05.02 MSG_TARGET_CMD_BUFFER_POST_BASE_LIST_REPLY added.
* 02-22-05 01.05.03 Changed a comment.
* 03-11-05 01.05.04 Removed TargetAssistExtended Request.
* 06-24-05 01.05.05 Added TargetAssistExtended structures and defines.
* 03-27-06 01.05.06 Added a comment.
* --------------------------------------------------------------------------
*/
#ifndef MPI_TARG_H
#define MPI_TARG_H
/******************************************************************************
*
* S C S I T a r g e t M e s s a g e s
*
*******************************************************************************/
typedef struct _CMD_BUFFER_DESCRIPTOR
{
U16 IoIndex; /* 00h */
U16 Reserved; /* 02h */
union /* 04h */
{
U32 PhysicalAddress32;
U64 PhysicalAddress64;
} u;
} CMD_BUFFER_DESCRIPTOR, MPI_POINTER PTR_CMD_BUFFER_DESCRIPTOR,
CmdBufferDescriptor_t, MPI_POINTER pCmdBufferDescriptor_t;
/****************************************************************************/
/* Target Command Buffer Post Request */
/****************************************************************************/
typedef struct _MSG_TARGET_CMD_BUFFER_POST_REQUEST
{
U8 BufferPostFlags; /* 00h */
U8 BufferCount; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U8 BufferLength; /* 04h */
U8 Reserved; /* 05h */
U8 Reserved1; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
CMD_BUFFER_DESCRIPTOR Buffer[1]; /* 0Ch */
} MSG_TARGET_CMD_BUFFER_POST_REQUEST, MPI_POINTER PTR_MSG_TARGET_CMD_BUFFER_POST_REQUEST,
TargetCmdBufferPostRequest_t, MPI_POINTER pTargetCmdBufferPostRequest_t;
#define CMD_BUFFER_POST_FLAGS_PORT_MASK (0x01)
#define CMD_BUFFER_POST_FLAGS_ADDR_MODE_MASK (0x80)
#define CMD_BUFFER_POST_FLAGS_ADDR_MODE_32 (0)
#define CMD_BUFFER_POST_FLAGS_ADDR_MODE_64 (1)
#define CMD_BUFFER_POST_FLAGS_64_BIT_ADDR (0x80)
#define CMD_BUFFER_POST_IO_INDEX_MASK (0x00003FFF)
#define CMD_BUFFER_POST_IO_INDEX_MASK_0100 (0x000003FF) /* obsolete */
typedef struct _MSG_TARGET_CMD_BUFFER_POST_REPLY
{
U8 BufferPostFlags; /* 00h */
U8 BufferCount; /* 01h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U8 BufferLength; /* 04h */
U8 Reserved; /* 05h */
U8 Reserved1; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U16 Reserved2; /* 0Ch */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
} MSG_TARGET_CMD_BUFFER_POST_REPLY, MPI_POINTER PTR_MSG_TARGET_CMD_BUFFER_POST_REPLY,
TargetCmdBufferPostReply_t, MPI_POINTER pTargetCmdBufferPostReply_t;
/* the following structure is obsolete as of MPI v1.2 */
typedef struct _MSG_PRIORITY_CMD_RECEIVED_REPLY
{
U16 Reserved; /* 00h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U16 Reserved1; /* 04h */
U8 Reserved2; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 PriorityReason; /* 0Ch */
U8 Reserved3; /* 0Dh */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U32 ReplyWord; /* 14h */
} MSG_PRIORITY_CMD_RECEIVED_REPLY, MPI_POINTER PTR_MSG_PRIORITY_CMD_RECEIVED_REPLY,
PriorityCommandReceivedReply_t, MPI_POINTER pPriorityCommandReceivedReply_t;
typedef struct _MSG_TARGET_CMD_BUFFER_POST_ERROR_REPLY
{
U16 Reserved; /* 00h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U16 Reserved1; /* 04h */
U8 Reserved2; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 PriorityReason; /* 0Ch */
U8 Reserved3; /* 0Dh */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U32 ReplyWord; /* 14h */
} MSG_TARGET_CMD_BUFFER_POST_ERROR_REPLY,
MPI_POINTER PTR_MSG_TARGET_CMD_BUFFER_POST_ERROR_REPLY,
TargetCmdBufferPostErrorReply_t, MPI_POINTER pTargetCmdBufferPostErrorReply_t;
#define PRIORITY_REASON_NO_DISCONNECT (0x00)
#define PRIORITY_REASON_SCSI_TASK_MANAGEMENT (0x01)
#define PRIORITY_REASON_CMD_PARITY_ERR (0x02)
#define PRIORITY_REASON_MSG_OUT_PARITY_ERR (0x03)
#define PRIORITY_REASON_LQ_CRC_ERR (0x04)
#define PRIORITY_REASON_CMD_CRC_ERR (0x05)
#define PRIORITY_REASON_PROTOCOL_ERR (0x06)
#define PRIORITY_REASON_DATA_OUT_PARITY_ERR (0x07)
#define PRIORITY_REASON_DATA_OUT_CRC_ERR (0x08)
#define PRIORITY_REASON_TARGET_BUSY (0x09)
#define PRIORITY_REASON_UNKNOWN (0xFF)
/****************************************************************************/
/* Target Command Buffer Post Base Request */
/****************************************************************************/
typedef struct _MSG_TARGET_CMD_BUF_POST_BASE_REQUEST
{
U8 BufferPostFlags; /* 00h */
U8 PortNumber; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 TotalCmdBuffers; /* 04h */
U8 Reserved; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U32 Reserved1; /* 0Ch */
U16 CmdBufferLength; /* 10h */
U16 NextCmdBufferOffset; /* 12h */
U32 BaseAddressLow; /* 14h */
U32 BaseAddressHigh; /* 18h */
} MSG_TARGET_CMD_BUF_POST_BASE_REQUEST,
MPI_POINTER PTR__MSG_TARGET_CMD_BUF_POST_BASE_REQUEST,
TargetCmdBufferPostBaseRequest_t,
MPI_POINTER pTargetCmdBufferPostBaseRequest_t;
#define CMD_BUFFER_POST_BASE_FLAGS_AUTO_POST_ALL (0x01)
typedef struct _MSG_TARGET_CMD_BUFFER_POST_BASE_LIST_REPLY
{
U16 Reserved; /* 00h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U16 Reserved1; /* 04h */
U8 Reserved2; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U16 Reserved3; /* 0Ch */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
} MSG_TARGET_CMD_BUFFER_POST_BASE_LIST_REPLY,
MPI_POINTER PTR_MSG_TARGET_CMD_BUFFER_POST_BASE_LIST_REPLY,
TargetCmdBufferPostBaseListReply_t,
MPI_POINTER pTargetCmdBufferPostBaseListReply_t;
/****************************************************************************/
/* Target Command Buffer Post List Request */
/****************************************************************************/
typedef struct _MSG_TARGET_CMD_BUF_POST_LIST_REQUEST
{
U8 Reserved; /* 00h */
U8 PortNumber; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 CmdBufferCount; /* 04h */
U8 Reserved1; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U32 Reserved2; /* 0Ch */
U16 IoIndex[2]; /* 10h */
} MSG_TARGET_CMD_BUF_POST_LIST_REQUEST,
MPI_POINTER PTR_MSG_TARGET_CMD_BUF_POST_LIST_REQUEST,
TargetCmdBufferPostListRequest_t,
MPI_POINTER pTargetCmdBufferPostListRequest_t;
/****************************************************************************/
/* Command Buffer Formats (with 16 byte CDB) */
/****************************************************************************/
typedef struct _MPI_TARGET_FCP_CMD_BUFFER
{
U8 FcpLun[8]; /* 00h */
U8 FcpCntl[4]; /* 08h */
U8 FcpCdb[16]; /* 0Ch */
U32 FcpDl; /* 1Ch */
U8 AliasIndex; /* 20h */
U8 Reserved1; /* 21h */
U16 OptionalOxid; /* 22h */
} MPI_TARGET_FCP_CMD_BUFFER, MPI_POINTER PTR_MPI_TARGET_FCP_CMD_BUFFER,
MpiTargetFcpCmdBuffer, MPI_POINTER pMpiTargetFcpCmdBuffer;
typedef struct _MPI_TARGET_SCSI_SPI_CMD_BUFFER
{
/* SPI L_Q information unit */
U8 L_QType; /* 00h */
U8 Reserved; /* 01h */
U16 Tag; /* 02h */
U8 LogicalUnitNumber[8]; /* 04h */
U32 DataLength; /* 0Ch */
/* SPI command information unit */
U8 ReservedFirstByteOfCommandIU; /* 10h */
U8 TaskAttribute; /* 11h */
U8 TaskManagementFlags; /* 12h */
U8 AdditionalCDBLength; /* 13h */
U8 CDB[16]; /* 14h */
/* Alias ID */
U8 AliasID; /* 24h */
U8 Reserved1; /* 25h */
U16 Reserved2; /* 26h */
} MPI_TARGET_SCSI_SPI_CMD_BUFFER,
MPI_POINTER PTR_MPI_TARGET_SCSI_SPI_CMD_BUFFER,
MpiTargetScsiSpiCmdBuffer, MPI_POINTER pMpiTargetScsiSpiCmdBuffer;
typedef struct _MPI_TARGET_SSP_CMD_BUFFER
{
U8 FrameType; /* 00h */
U8 Reserved1; /* 01h */
U16 Reserved2; /* 02h */
U16 InitiatorTag; /* 04h */
U16 DevHandle; /* 06h */
/* COMMAND information unit starts here */
U8 LogicalUnitNumber[8]; /* 08h */
U8 Reserved3; /* 10h */
U8 TaskAttribute; /* lower 3 bits */ /* 11h */
U8 Reserved4; /* 12h */
U8 AdditionalCDBLength; /* upper 5 bits */ /* 13h */
U8 CDB[16]; /* 14h */
/* Additional CDB bytes extend past the CDB field */
} MPI_TARGET_SSP_CMD_BUFFER, MPI_POINTER PTR_MPI_TARGET_SSP_CMD_BUFFER,
MpiTargetSspCmdBuffer, MPI_POINTER pMpiTargetSspCmdBuffer;
typedef struct _MPI_TARGET_SSP_TASK_BUFFER
{
U8 FrameType; /* 00h */
U8 Reserved1; /* 01h */
U16 Reserved2; /* 02h */
U16 InitiatorTag; /* 04h */
U16 DevHandle; /* 06h */
/* TASK information unit starts here */
U8 LogicalUnitNumber[8]; /* 08h */
U8 Reserved3; /* 10h */
U8 Reserved4; /* 11h */
U8 TaskManagementFunction; /* 12h */
U8 Reserved5; /* 13h */
U16 ManagedTaskTag; /* 14h */
U16 Reserved6; /* 16h */
U32 Reserved7; /* 18h */
U32 Reserved8; /* 1Ch */
U32 Reserved9; /* 20h */
} MPI_TARGET_SSP_TASK_BUFFER, MPI_POINTER PTR_MPI_TARGET_SSP_TASK_BUFFER,
MpiTargetSspTaskBuffer, MPI_POINTER pMpiTargetSspTaskBuffer;
/****************************************************************************/
/* Target Assist Request */
/****************************************************************************/
typedef struct _MSG_TARGET_ASSIST_REQUEST
{
U8 StatusCode; /* 00h */
U8 TargetAssistFlags; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 QueueTag; /* 04h */
U8 Reserved; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U32 ReplyWord; /* 0Ch */
U8 LUN[8]; /* 10h */
U32 RelativeOffset; /* 18h */
U32 DataLength; /* 1Ch */
SGE_IO_UNION SGL[1]; /* 20h */
} MSG_TARGET_ASSIST_REQUEST, MPI_POINTER PTR_MSG_TARGET_ASSIST_REQUEST,
TargetAssistRequest_t, MPI_POINTER pTargetAssistRequest_t;
#define TARGET_ASSIST_FLAGS_DATA_DIRECTION (0x01)
#define TARGET_ASSIST_FLAGS_AUTO_STATUS (0x02)
#define TARGET_ASSIST_FLAGS_HIGH_PRIORITY (0x04)
#define TARGET_ASSIST_FLAGS_CONFIRMED (0x08)
#define TARGET_ASSIST_FLAGS_REPOST_CMD_BUFFER (0x80)
/* Standard Target Mode Reply message */
typedef struct _MSG_TARGET_ERROR_REPLY
{
U16 Reserved; /* 00h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U16 Reserved1; /* 04h */
U8 Reserved2; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 PriorityReason; /* 0Ch */
U8 Reserved3; /* 0Dh */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U32 ReplyWord; /* 14h */
U32 TransferCount; /* 18h */
} MSG_TARGET_ERROR_REPLY, MPI_POINTER PTR_MSG_TARGET_ERROR_REPLY,
TargetErrorReply_t, MPI_POINTER pTargetErrorReply_t;
/****************************************************************************/
/* Target Assist Extended Request */
/****************************************************************************/
typedef struct _MSG_TARGET_ASSIST_EXT_REQUEST
{
U8 StatusCode; /* 00h */
U8 TargetAssistFlags; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 QueueTag; /* 04h */
U8 Reserved1; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U32 ReplyWord; /* 0Ch */
U8 LUN[8]; /* 10h */
U32 RelativeOffset; /* 18h */
U32 Reserved2; /* 1Ch */
U32 Reserved3; /* 20h */
U32 PrimaryReferenceTag; /* 24h */
U16 PrimaryApplicationTag; /* 28h */
U16 PrimaryApplicationTagMask; /* 2Ah */
U32 Reserved4; /* 2Ch */
U32 DataLength; /* 30h */
U32 BidirectionalDataLength; /* 34h */
U32 SecondaryReferenceTag; /* 38h */
U16 SecondaryApplicationTag; /* 3Ch */
U16 Reserved5; /* 3Eh */
U16 EEDPFlags; /* 40h */
U16 ApplicationTagTranslationMask; /* 42h */
U32 EEDPBlockSize; /* 44h */
U8 SGLOffset0; /* 48h */
U8 SGLOffset1; /* 49h */
U8 SGLOffset2; /* 4Ah */
U8 SGLOffset3; /* 4Bh */
U32 Reserved6; /* 4Ch */
SGE_IO_UNION SGL[1]; /* 50h */
} MSG_TARGET_ASSIST_EXT_REQUEST, MPI_POINTER PTR_MSG_TARGET_ASSIST_EXT_REQUEST,
TargetAssistExtRequest_t, MPI_POINTER pTargetAssistExtRequest_t;
/* see the defines after MSG_TARGET_ASSIST_REQUEST for TargetAssistFlags */
/* defines for the MsgFlags field */
#define TARGET_ASSIST_EXT_MSGFLAGS_BIDIRECTIONAL (0x20)
#define TARGET_ASSIST_EXT_MSGFLAGS_MULTICAST (0x10)
#define TARGET_ASSIST_EXT_MSGFLAGS_SGL_OFFSET_CHAINS (0x08)
/* defines for the EEDPFlags field */
#define TARGET_ASSIST_EXT_EEDP_MASK_OP (0x0007)
#define TARGET_ASSIST_EXT_EEDP_NOOP_OP (0x0000)
#define TARGET_ASSIST_EXT_EEDP_CHK_OP (0x0001)
#define TARGET_ASSIST_EXT_EEDP_STRIP_OP (0x0002)
#define TARGET_ASSIST_EXT_EEDP_CHKRM_OP (0x0003)
#define TARGET_ASSIST_EXT_EEDP_INSERT_OP (0x0004)
#define TARGET_ASSIST_EXT_EEDP_REPLACE_OP (0x0006)
#define TARGET_ASSIST_EXT_EEDP_CHKREGEN_OP (0x0007)
#define TARGET_ASSIST_EXT_EEDP_PASS_REF_TAG (0x0008)
#define TARGET_ASSIST_EXT_EEDP_T10_CHK_MASK (0x0700)
#define TARGET_ASSIST_EXT_EEDP_T10_CHK_GUARD (0x0100)
#define TARGET_ASSIST_EXT_EEDP_T10_CHK_APPTAG (0x0200)
#define TARGET_ASSIST_EXT_EEDP_T10_CHK_REFTAG (0x0400)
#define TARGET_ASSIST_EXT_EEDP_T10_CHK_SHIFT (8)
#define TARGET_ASSIST_EXT_EEDP_INC_SEC_APPTAG (0x1000)
#define TARGET_ASSIST_EXT_EEDP_INC_PRI_APPTAG (0x2000)
#define TARGET_ASSIST_EXT_EEDP_INC_SEC_REFTAG (0x4000)
#define TARGET_ASSIST_EXT_EEDP_INC_PRI_REFTAG (0x8000)
/****************************************************************************/
/* Target Status Send Request */
/****************************************************************************/
typedef struct _MSG_TARGET_STATUS_SEND_REQUEST
{
U8 StatusCode; /* 00h */
U8 StatusFlags; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 QueueTag; /* 04h */
U8 Reserved; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U32 ReplyWord; /* 0Ch */
U8 LUN[8]; /* 10h */
SGE_SIMPLE_UNION StatusDataSGE; /* 18h */
} MSG_TARGET_STATUS_SEND_REQUEST, MPI_POINTER PTR_MSG_TARGET_STATUS_SEND_REQUEST,
TargetStatusSendRequest_t, MPI_POINTER pTargetStatusSendRequest_t;
#define TARGET_STATUS_SEND_FLAGS_AUTO_GOOD_STATUS (0x01)
#define TARGET_STATUS_SEND_FLAGS_HIGH_PRIORITY (0x04)
#define TARGET_STATUS_SEND_FLAGS_CONFIRMED (0x08)
#define TARGET_STATUS_SEND_FLAGS_REPOST_CMD_BUFFER (0x80)
/*
* NOTE: FCP_RSP data is big-endian. When used on a little-endian system, this
* structure properly orders the bytes.
*/
typedef struct _MPI_TARGET_FCP_RSP_BUFFER
{
U8 Reserved0[8]; /* 00h */
U8 Reserved1[2]; /* 08h */
U8 FcpFlags; /* 0Ah */
U8 FcpStatus; /* 0Bh */
U32 FcpResid; /* 0Ch */
U32 FcpSenseLength; /* 10h */
U32 FcpResponseLength; /* 14h */
U8 FcpResponseData[8]; /* 18h */
U8 FcpSenseData[32]; /* Pad to 64 bytes */ /* 20h */
} MPI_TARGET_FCP_RSP_BUFFER, MPI_POINTER PTR_MPI_TARGET_FCP_RSP_BUFFER,
MpiTargetFcpRspBuffer, MPI_POINTER pMpiTargetFcpRspBuffer;
/*
* NOTE: The SPI status IU is big-endian. When used on a little-endian system,
* this structure properly orders the bytes.
*/
typedef struct _MPI_TARGET_SCSI_SPI_STATUS_IU
{
U8 Reserved0; /* 00h */
U8 Reserved1; /* 01h */
U8 Valid; /* 02h */
U8 Status; /* 03h */
U32 SenseDataListLength; /* 04h */
U32 PktFailuresListLength; /* 08h */
U8 SenseData[52]; /* Pad the IU to 64 bytes */ /* 0Ch */
} MPI_TARGET_SCSI_SPI_STATUS_IU, MPI_POINTER PTR_MPI_TARGET_SCSI_SPI_STATUS_IU,
TargetScsiSpiStatusIU_t, MPI_POINTER pTargetScsiSpiStatusIU_t;
/*
* NOTE: The SSP status IU is big-endian. When used on a little-endian system,
* this structure properly orders the bytes.
*/
typedef struct _MPI_TARGET_SSP_RSP_IU
{
U32 Reserved0[6]; /* reserved for SSP header */ /* 00h */
/* start of RESPONSE information unit */
U32 Reserved1; /* 18h */
U32 Reserved2; /* 1Ch */
U16 Reserved3; /* 20h */
U8 DataPres; /* lower 2 bits */ /* 22h */
U8 Status; /* 23h */
U32 Reserved4; /* 24h */
U32 SenseDataLength; /* 28h */
U32 ResponseDataLength; /* 2Ch */
U8 ResponseSenseData[4]; /* 30h */
} MPI_TARGET_SSP_RSP_IU, MPI_POINTER PTR_MPI_TARGET_SSP_RSP_IU,
MpiTargetSspRspIu_t, MPI_POINTER pMpiTargetSspRspIu_t;
/****************************************************************************/
/* Target Mode Abort Request */
/****************************************************************************/
typedef struct _MSG_TARGET_MODE_ABORT_REQUEST
{
U8 AbortType; /* 00h */
U8 Reserved; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 Reserved1; /* 04h */
U8 Reserved2; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U32 ReplyWord; /* 0Ch */
U32 MsgContextToAbort; /* 10h */
} MSG_TARGET_MODE_ABORT, MPI_POINTER PTR_MSG_TARGET_MODE_ABORT,
TargetModeAbort_t, MPI_POINTER pTargetModeAbort_t;
#define TARGET_MODE_ABORT_TYPE_ALL_CMD_BUFFERS (0x00)
#define TARGET_MODE_ABORT_TYPE_ALL_IO (0x01)
#define TARGET_MODE_ABORT_TYPE_EXACT_IO (0x02)
#define TARGET_MODE_ABORT_TYPE_EXACT_IO_REQUEST (0x03)
/* Target Mode Abort Reply */
typedef struct _MSG_TARGET_MODE_ABORT_REPLY
{
U16 Reserved; /* 00h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U16 Reserved1; /* 04h */
U8 Reserved2; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U16 Reserved3; /* 0Ch */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U32 AbortCount; /* 14h */
} MSG_TARGET_MODE_ABORT_REPLY, MPI_POINTER PTR_MSG_TARGET_MODE_ABORT_REPLY,
TargetModeAbortReply_t, MPI_POINTER pTargetModeAbortReply_t;
/****************************************************************************/
/* Target Mode Context Reply */
/****************************************************************************/
#define TARGET_MODE_REPLY_IO_INDEX_MASK (0x00003FFF)
#define TARGET_MODE_REPLY_IO_INDEX_SHIFT (0)
#define TARGET_MODE_REPLY_INITIATOR_INDEX_MASK (0x03FFC000)
#define TARGET_MODE_REPLY_INITIATOR_INDEX_SHIFT (14)
#define TARGET_MODE_REPLY_ALIAS_MASK (0x04000000)
#define TARGET_MODE_REPLY_ALIAS_SHIFT (26)
#define TARGET_MODE_REPLY_PORT_MASK (0x10000000)
#define TARGET_MODE_REPLY_PORT_SHIFT (28)
#define GET_IO_INDEX(x) (((x) & TARGET_MODE_REPLY_IO_INDEX_MASK) \
>> TARGET_MODE_REPLY_IO_INDEX_SHIFT)
#define SET_IO_INDEX(t, i) \
((t) = ((t) & ~TARGET_MODE_REPLY_IO_INDEX_MASK) | \
(((i) << TARGET_MODE_REPLY_IO_INDEX_SHIFT) & \
TARGET_MODE_REPLY_IO_INDEX_MASK))
#define GET_INITIATOR_INDEX(x) (((x) & TARGET_MODE_REPLY_INITIATOR_INDEX_MASK) \
>> TARGET_MODE_REPLY_INITIATOR_INDEX_SHIFT)
#define SET_INITIATOR_INDEX(t, ii) \
((t) = ((t) & ~TARGET_MODE_REPLY_INITIATOR_INDEX_MASK) | \
(((ii) << TARGET_MODE_REPLY_INITIATOR_INDEX_SHIFT) & \
TARGET_MODE_REPLY_INITIATOR_INDEX_MASK))
#define GET_ALIAS(x) (((x) & TARGET_MODE_REPLY_ALIAS_MASK) \
>> TARGET_MODE_REPLY_ALIAS_SHIFT)
#define SET_ALIAS(t, a) ((t) = ((t) & ~TARGET_MODE_REPLY_ALIAS_MASK) | \
(((a) << TARGET_MODE_REPLY_ALIAS_SHIFT) & \
TARGET_MODE_REPLY_ALIAS_MASK))
#define GET_PORT(x) (((x) & TARGET_MODE_REPLY_PORT_MASK) \
>> TARGET_MODE_REPLY_PORT_SHIFT)
#define SET_PORT(t, p) ((t) = ((t) & ~TARGET_MODE_REPLY_PORT_MASK) | \
(((p) << TARGET_MODE_REPLY_PORT_SHIFT) & \
TARGET_MODE_REPLY_PORT_MASK))
/* the following obsolete values are for MPI v1.0 support */
#define TARGET_MODE_REPLY_0100_MASK_HOST_INDEX (0x000003FF)
#define TARGET_MODE_REPLY_0100_SHIFT_HOST_INDEX (0)
#define TARGET_MODE_REPLY_0100_MASK_IOC_INDEX (0x001FF800)
#define TARGET_MODE_REPLY_0100_SHIFT_IOC_INDEX (11)
#define TARGET_MODE_REPLY_0100_PORT_MASK (0x00400000)
#define TARGET_MODE_REPLY_0100_PORT_SHIFT (22)
#define TARGET_MODE_REPLY_0100_MASK_INITIATOR_INDEX (0x1F800000)
#define TARGET_MODE_REPLY_0100_SHIFT_INITIATOR_INDEX (23)
#define GET_HOST_INDEX_0100(x) (((x) & TARGET_MODE_REPLY_0100_MASK_HOST_INDEX) \
>> TARGET_MODE_REPLY_0100_SHIFT_HOST_INDEX)
#define SET_HOST_INDEX_0100(t, hi) \
((t) = ((t) & ~TARGET_MODE_REPLY_0100_MASK_HOST_INDEX) | \
(((hi) << TARGET_MODE_REPLY_0100_SHIFT_HOST_INDEX) & \
TARGET_MODE_REPLY_0100_MASK_HOST_INDEX))
#define GET_IOC_INDEX_0100(x) (((x) & TARGET_MODE_REPLY_0100_MASK_IOC_INDEX) \
>> TARGET_MODE_REPLY_0100_SHIFT_IOC_INDEX)
#define SET_IOC_INDEX_0100(t, ii) \
((t) = ((t) & ~TARGET_MODE_REPLY_0100_MASK_IOC_INDEX) | \
(((ii) << TARGET_MODE_REPLY_0100_SHIFT_IOC_INDEX) & \
TARGET_MODE_REPLY_0100_MASK_IOC_INDEX))
#define GET_INITIATOR_INDEX_0100(x) \
(((x) & TARGET_MODE_REPLY_0100_MASK_INITIATOR_INDEX) \
>> TARGET_MODE_REPLY_0100_SHIFT_INITIATOR_INDEX)
#define SET_INITIATOR_INDEX_0100(t, ii) \
((t) = ((t) & ~TARGET_MODE_REPLY_0100_MASK_INITIATOR_INDEX) | \
(((ii) << TARGET_MODE_REPLY_0100_SHIFT_INITIATOR_INDEX) & \
TARGET_MODE_REPLY_0100_MASK_INITIATOR_INDEX))
#endif

354
kernel/drivers/message/fusion/lsi/mpi_tool.h Normal file
View File

@@ -0,0 +1,354 @@
/*
* Copyright (c) 2001-2008 LSI Corporation.
*
*
* Name: mpi_tool.h
* Title: MPI Toolbox structures and definitions
* Creation Date: July 30, 2001
*
* mpi_tool.h Version: 01.05.03
*
* Version History
* ---------------
*
* Date Version Description
* -------- -------- ------------------------------------------------------
* 08-08-01 01.02.01 Original release.
* 08-29-01 01.02.02 Added DIAG_DATA_UPLOAD_HEADER and related defines.
* 01-16-04 01.02.03 Added defines and structures for new tools
*. MPI_TOOLBOX_ISTWI_READ_WRITE_TOOL and
* MPI_TOOLBOX_FC_MANAGEMENT_TOOL.
* 04-29-04 01.02.04 Added message structures for Diagnostic Buffer Post and
* Diagnostic Release requests and replies.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Original release for MPI v1.5.
* 10-06-04 01.05.02 Added define for MPI_DIAG_BUF_TYPE_COUNT.
* 02-09-05 01.05.03 Added frame size option to FC management tool.
* Added Beacon tool to the Toolbox.
* --------------------------------------------------------------------------
*/
#ifndef MPI_TOOL_H
#define MPI_TOOL_H
#define MPI_TOOLBOX_CLEAN_TOOL (0x00)
#define MPI_TOOLBOX_MEMORY_MOVE_TOOL (0x01)
#define MPI_TOOLBOX_DIAG_DATA_UPLOAD_TOOL (0x02)
#define MPI_TOOLBOX_ISTWI_READ_WRITE_TOOL (0x03)
#define MPI_TOOLBOX_FC_MANAGEMENT_TOOL (0x04)
#define MPI_TOOLBOX_BEACON_TOOL (0x05)
/****************************************************************************/
/* Toolbox reply */
/****************************************************************************/
typedef struct _MSG_TOOLBOX_REPLY
{
U8 Tool; /* 00h */
U8 Reserved; /* 01h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U16 Reserved1; /* 04h */
U8 Reserved2; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U16 Reserved3; /* 0Ch */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
} MSG_TOOLBOX_REPLY, MPI_POINTER PTR_MSG_TOOLBOX_REPLY,
ToolboxReply_t, MPI_POINTER pToolboxReply_t;
/****************************************************************************/
/* Toolbox Clean Tool request */
/****************************************************************************/
typedef struct _MSG_TOOLBOX_CLEAN_REQUEST
{
U8 Tool; /* 00h */
U8 Reserved; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 Reserved1; /* 04h */
U8 Reserved2; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U32 Flags; /* 0Ch */
} MSG_TOOLBOX_CLEAN_REQUEST, MPI_POINTER PTR_MSG_TOOLBOX_CLEAN_REQUEST,
ToolboxCleanRequest_t, MPI_POINTER pToolboxCleanRequest_t;
#define MPI_TOOLBOX_CLEAN_NVSRAM (0x00000001)
#define MPI_TOOLBOX_CLEAN_SEEPROM (0x00000002)
#define MPI_TOOLBOX_CLEAN_FLASH (0x00000004)
#define MPI_TOOLBOX_CLEAN_BOOTLOADER (0x04000000)
#define MPI_TOOLBOX_CLEAN_FW_BACKUP (0x08000000)
#define MPI_TOOLBOX_CLEAN_FW_CURRENT (0x10000000)
#define MPI_TOOLBOX_CLEAN_OTHER_PERSIST_PAGES (0x20000000)
#define MPI_TOOLBOX_CLEAN_PERSIST_MANUFACT_PAGES (0x40000000)
#define MPI_TOOLBOX_CLEAN_BOOT_SERVICES (0x80000000)
/****************************************************************************/
/* Toolbox Memory Move request */
/****************************************************************************/
typedef struct _MSG_TOOLBOX_MEM_MOVE_REQUEST
{
U8 Tool; /* 00h */
U8 Reserved; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 Reserved1; /* 04h */
U8 Reserved2; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
SGE_SIMPLE_UNION SGL; /* 0Ch */
} MSG_TOOLBOX_MEM_MOVE_REQUEST, MPI_POINTER PTR_MSG_TOOLBOX_MEM_MOVE_REQUEST,
ToolboxMemMoveRequest_t, MPI_POINTER pToolboxMemMoveRequest_t;
/****************************************************************************/
/* Toolbox Diagnostic Data Upload request */
/****************************************************************************/
typedef struct _MSG_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST
{
U8 Tool; /* 00h */
U8 Reserved; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 Reserved1; /* 04h */
U8 Reserved2; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U32 Flags; /* 0Ch */
U32 Reserved3; /* 10h */
SGE_SIMPLE_UNION SGL; /* 14h */
} MSG_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST, MPI_POINTER PTR_MSG_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST,
ToolboxDiagDataUploadRequest_t, MPI_POINTER pToolboxDiagDataUploadRequest_t;
typedef struct _DIAG_DATA_UPLOAD_HEADER
{
U32 DiagDataLength; /* 00h */
U8 FormatCode; /* 04h */
U8 Reserved; /* 05h */
U16 Reserved1; /* 06h */
} DIAG_DATA_UPLOAD_HEADER, MPI_POINTER PTR_DIAG_DATA_UPLOAD_HEADER,
DiagDataUploadHeader_t, MPI_POINTER pDiagDataUploadHeader_t;
#define MPI_TB_DIAG_FORMAT_SCSI_PRINTF_1 (0x01)
#define MPI_TB_DIAG_FORMAT_SCSI_2 (0x02)
#define MPI_TB_DIAG_FORMAT_SCSI_3 (0x03)
#define MPI_TB_DIAG_FORMAT_FC_TRACE_1 (0x04)
/****************************************************************************/
/* Toolbox ISTWI Read Write request */
/****************************************************************************/
typedef struct _MSG_TOOLBOX_ISTWI_READ_WRITE_REQUEST
{
U8 Tool; /* 00h */
U8 Reserved; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 Reserved1; /* 04h */
U8 Reserved2; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 Flags; /* 0Ch */
U8 BusNum; /* 0Dh */
U16 Reserved3; /* 0Eh */
U8 NumAddressBytes; /* 10h */
U8 Reserved4; /* 11h */
U16 DataLength; /* 12h */
U8 DeviceAddr; /* 14h */
U8 Addr1; /* 15h */
U8 Addr2; /* 16h */
U8 Addr3; /* 17h */
U32 Reserved5; /* 18h */
SGE_SIMPLE_UNION SGL; /* 1Ch */
} MSG_TOOLBOX_ISTWI_READ_WRITE_REQUEST, MPI_POINTER PTR_MSG_TOOLBOX_ISTWI_READ_WRITE_REQUEST,
ToolboxIstwiReadWriteRequest_t, MPI_POINTER pToolboxIstwiReadWriteRequest_t;
#define MPI_TB_ISTWI_FLAGS_WRITE (0x00)
#define MPI_TB_ISTWI_FLAGS_READ (0x01)
/****************************************************************************/
/* Toolbox FC Management request */
/****************************************************************************/
/* ActionInfo for Bus and TargetId */
typedef struct _MPI_TB_FC_MANAGE_BUS_TID_AI
{
U16 Reserved; /* 00h */
U8 Bus; /* 02h */
U8 TargetId; /* 03h */
} MPI_TB_FC_MANAGE_BUS_TID_AI, MPI_POINTER PTR_MPI_TB_FC_MANAGE_BUS_TID_AI,
MpiTbFcManageBusTidAi_t, MPI_POINTER pMpiTbFcManageBusTidAi_t;
/* ActionInfo for port identifier */
typedef struct _MPI_TB_FC_MANAGE_PID_AI
{
U32 PortIdentifier; /* 00h */
} MPI_TB_FC_MANAGE_PID_AI, MPI_POINTER PTR_MPI_TB_FC_MANAGE_PID_AI,
MpiTbFcManagePidAi_t, MPI_POINTER pMpiTbFcManagePidAi_t;
/* ActionInfo for set max frame size */
typedef struct _MPI_TB_FC_MANAGE_FRAME_SIZE_AI
{
U16 FrameSize; /* 00h */
U8 PortNum; /* 02h */
U8 Reserved1; /* 03h */
} MPI_TB_FC_MANAGE_FRAME_SIZE_AI, MPI_POINTER PTR_MPI_TB_FC_MANAGE_FRAME_SIZE_AI,
MpiTbFcManageFrameSizeAi_t, MPI_POINTER pMpiTbFcManageFrameSizeAi_t;
/* union of ActionInfo */
typedef union _MPI_TB_FC_MANAGE_AI_UNION
{
MPI_TB_FC_MANAGE_BUS_TID_AI BusTid;
MPI_TB_FC_MANAGE_PID_AI Port;
MPI_TB_FC_MANAGE_FRAME_SIZE_AI FrameSize;
} MPI_TB_FC_MANAGE_AI_UNION, MPI_POINTER PTR_MPI_TB_FC_MANAGE_AI_UNION,
MpiTbFcManageAiUnion_t, MPI_POINTER pMpiTbFcManageAiUnion_t;
typedef struct _MSG_TOOLBOX_FC_MANAGE_REQUEST
{
U8 Tool; /* 00h */
U8 Reserved; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 Reserved1; /* 04h */
U8 Reserved2; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 Action; /* 0Ch */
U8 Reserved3; /* 0Dh */
U16 Reserved4; /* 0Eh */
MPI_TB_FC_MANAGE_AI_UNION ActionInfo; /* 10h */
} MSG_TOOLBOX_FC_MANAGE_REQUEST, MPI_POINTER PTR_MSG_TOOLBOX_FC_MANAGE_REQUEST,
ToolboxFcManageRequest_t, MPI_POINTER pToolboxFcManageRequest_t;
/* defines for the Action field */
#define MPI_TB_FC_MANAGE_ACTION_DISC_ALL (0x00)
#define MPI_TB_FC_MANAGE_ACTION_DISC_PID (0x01)
#define MPI_TB_FC_MANAGE_ACTION_DISC_BUS_TID (0x02)
#define MPI_TB_FC_MANAGE_ACTION_SET_MAX_FRAME_SIZE (0x03)
/****************************************************************************/
/* Toolbox Beacon Tool request */
/****************************************************************************/
typedef struct _MSG_TOOLBOX_BEACON_REQUEST
{
U8 Tool; /* 00h */
U8 Reserved; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 Reserved1; /* 04h */
U8 Reserved2; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 ConnectNum; /* 0Ch */
U8 PortNum; /* 0Dh */
U8 Reserved3; /* 0Eh */
U8 Flags; /* 0Fh */
} MSG_TOOLBOX_BEACON_REQUEST, MPI_POINTER PTR_MSG_TOOLBOX_BEACON_REQUEST,
ToolboxBeaconRequest_t, MPI_POINTER pToolboxBeaconRequest_t;
#define MPI_TOOLBOX_FLAGS_BEACON_MODE_OFF (0x00)
#define MPI_TOOLBOX_FLAGS_BEACON_MODE_ON (0x01)
/****************************************************************************/
/* Diagnostic Buffer Post request */
/****************************************************************************/
typedef struct _MSG_DIAG_BUFFER_POST_REQUEST
{
U8 TraceLevel; /* 00h */
U8 BufferType; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 Reserved1; /* 04h */
U8 Reserved2; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U32 ExtendedType; /* 0Ch */
U32 BufferLength; /* 10h */
U32 ProductSpecific[4]; /* 14h */
U32 Reserved3; /* 24h */
U64 BufferAddress; /* 28h */
} MSG_DIAG_BUFFER_POST_REQUEST, MPI_POINTER PTR_MSG_DIAG_BUFFER_POST_REQUEST,
DiagBufferPostRequest_t, MPI_POINTER pDiagBufferPostRequest_t;
#define MPI_DIAG_BUF_TYPE_TRACE (0x00)
#define MPI_DIAG_BUF_TYPE_SNAPSHOT (0x01)
#define MPI_DIAG_BUF_TYPE_EXTENDED (0x02)
/* count of the number of buffer types */
#define MPI_DIAG_BUF_TYPE_COUNT (0x03)
#define MPI_DIAG_EXTENDED_QTAG (0x00000001)
/* Diagnostic Buffer Post reply */
typedef struct _MSG_DIAG_BUFFER_POST_REPLY
{
U8 Reserved1; /* 00h */
U8 BufferType; /* 01h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U16 Reserved2; /* 04h */
U8 Reserved3; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U16 Reserved4; /* 0Ch */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U32 TransferLength; /* 14h */
} MSG_DIAG_BUFFER_POST_REPLY, MPI_POINTER PTR_MSG_DIAG_BUFFER_POST_REPLY,
DiagBufferPostReply_t, MPI_POINTER pDiagBufferPostReply_t;
/****************************************************************************/
/* Diagnostic Release request */
/****************************************************************************/
typedef struct _MSG_DIAG_RELEASE_REQUEST
{
U8 Reserved1; /* 00h */
U8 BufferType; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 Reserved2; /* 04h */
U8 Reserved3; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
} MSG_DIAG_RELEASE_REQUEST, MPI_POINTER PTR_MSG_DIAG_RELEASE_REQUEST,
DiagReleaseRequest_t, MPI_POINTER pDiagReleaseRequest_t;
/* Diagnostic Release reply */
typedef struct _MSG_DIAG_RELEASE_REPLY
{
U8 Reserved1; /* 00h */
U8 BufferType; /* 01h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U16 Reserved2; /* 04h */
U8 Reserved3; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U16 Reserved4; /* 0Ch */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
} MSG_DIAG_RELEASE_REPLY, MPI_POINTER PTR_MSG_DIAG_RELEASE_REPLY,
DiagReleaseReply_t, MPI_POINTER pDiagReleaseReply_t;
#endif

83
kernel/drivers/message/fusion/lsi/mpi_type.h Normal file
View File

@@ -0,0 +1,83 @@
/*
* Copyright (c) 2000-2008 LSI Corporation.
*
*
* Name: mpi_type.h
* Title: MPI Basic type definitions
* Creation Date: June 6, 2000
*
* mpi_type.h Version: 01.05.02
*
* Version History
* ---------------
*
* Date Version Description
* -------- -------- ------------------------------------------------------
* 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
* 06-06-00 01.00.01 Update version number for 1.0 release.
* 11-02-00 01.01.01 Original release for post 1.0 work
* 02-20-01 01.01.02 Added define and ifdef for MPI_POINTER.
* 08-08-01 01.02.01 Original release for v1.2 work.
* 05-11-04 01.03.01 Original release for MPI v1.3.
* 08-19-04 01.05.01 Original release for MPI v1.5.
* --------------------------------------------------------------------------
*/
#ifndef MPI_TYPE_H
#define MPI_TYPE_H
/*******************************************************************************
* Define MPI_POINTER if it hasn't already been defined. By default MPI_POINTER
* is defined to be a near pointer. MPI_POINTER can be defined as a far pointer
* by defining MPI_POINTER as "far *" before this header file is included.
*/
#ifndef MPI_POINTER
#define MPI_POINTER *
#endif
/*****************************************************************************
*
* B a s i c T y p e s
*
*****************************************************************************/
typedef signed char S8;
typedef unsigned char U8;
typedef signed short S16;
typedef unsigned short U16;
typedef int32_t S32;
typedef u_int32_t U32;
typedef struct _S64
{
U32 Low;
S32 High;
} S64;
typedef struct _U64
{
U32 Low;
U32 High;
} U64;
/****************************************************************************/
/* Pointers */
/****************************************************************************/
typedef S8 *PS8;
typedef U8 *PU8;
typedef S16 *PS16;
typedef U16 *PU16;
typedef S32 *PS32;
typedef U32 *PU32;
typedef S64 *PS64;
typedef U64 *PU64;
#endif