Makefile

@@ -69,18 +69,18 @@ NANO_FILENAME=$(NANO).tar.gz
 NANO_DOWNLOAD=http://www.nano-editor.org/dist/v2.8/$(NANO_FILENAME)
 
 PYTHON3_VERSION0=3.5
-PYTHON3_VERSION=$(PYTHON3_VERSION0).6
+PYTHON3_VERSION=$(PYTHON3_VERSION0).3
 PYTHON3=Python-$(PYTHON3_VERSION)
 PYTHON3_PACKAGE_NAME=$(PYTHON3)-1
 PYTHON3_FILENAME=$(PYTHON3).tgz
 PYTHON3_DOWNLOAD=https://www.python.org/ftp/python/$(PYTHON3_VERSION)/$(PYTHON3_FILENAME)
 
-MULTICAST_RTP_PACKAGE_NAME=multicast-rtp-2
+MULTICAST_RTP_PACKAGE_NAME=multicast-rtp-1
 
 TVHEADEND_COMMIT=master
 
-# 10663 10937 11234 11398
+# 10663 10937 11234
-OSCAM_REV=11434
+OSCAM_REV=11398
 
 define GIT_CLONE
 	@mkdir -p apps/host
@@ -161,7 +161,7 @@ fs.cpio: $(CPIO_SRCS)
 	  $(foreach f,$(notdir $(wildcard apps/minisatip8/html/*)), -e "apps/minisatip8/html/$f:usr/share/minisatip8/html/$f") \
 	  -e "apps/$(NANO)/src/nano:usr/bin/nano" \
 	  -e "apps/mtd-utils/nandwrite:usr/sbin/nandwrite2" \
-	  -e "apps/oscam-svn/Distribution/oscam-1.20_svn$(OSCAM_REV)-sh4-linux:sbin/oscamd"
+	  -e "apps/oscam-svn/Distribution/oscam-1.20-unstable_svn$(OSCAM_REV)-sh4-linux:sbin/oscamd"
 
 .PHONY: fs-list
 fs-list:

README.md

@@ -5,23 +5,47 @@ A firmware with minisatip for Inverto IDL-400s/Grundig GSS.BOX/Telestar Digibit
 
 [![paypal](https://www.paypalobjects.com/en_US/i/btn/btn_donateCC_LG.gif)](http://paypal.me/perex)
 
-The firmware contains various versions of [minisatip](https://github.com/catalinii/minisatip)
-which is tuned to get the best performance on this hardware. There are many extensions for
-the complex hobby satellite reception (like free input mode - use any tuner with any physical input,
-DVB-S2 multistream support etc.).
-
-There is no DLNA server, but there is HTTP and FTP server to server for
-example m3u playlists to clients.
-
 Releases:
 ---------
 
-  - download from [github releases](https://github.com/perexg/satip-axe/releases)
   - see to [dist](https://github.com/perexg/satip-axe/tree/master/dist) directory - README file
   - a TTL USB serial is not required to boot this precompiled firmware
     from the USB stick or an installation to the internal flash
 
-Developers:
+A notes for developers (might be outdated):
------------
+-------------------------------------------
 
-  - see [debug](https://github.com/perexg/satip-axe/tree/master/debug)
+Requirements:
+
+  - git, python
+  - STLinux 2.4 (all-sh4-glibc) - http://www.stlinux.com - installed to /opt/STM/STLinux-2.4/
+  - fakeroot package/tools
+
+Compilation:
+
+  - just type 'make'
+  - kernel with rootfs is in kernel/arch/sh/boot/uImage.gz
+
+Booting uImage.gz on Inverto IDL-400S/Grundig GSS.BOX/Telestar Digibit R1 from USB:
+
+  - connect TTL USB serial adapter to J3 connector (4 pins at the power supply)
+    - pin 1 = 3.6V (do not use), pin 2 = GND, pin 3 = RXD (STM CPU), pin 4 = TXD (STM CPU)
+    - parameters: 115200,8N1
+  - press 'Enter' when you turn on the box (you have only one second) to get 'idl4k> ' prompt
+    (it seems that 'Enter' is required also to enable the serial console)
+  - modify bootargs (optional - for original firmware)
+
+  set bootargs=console=ttyAS0,115200
+
+  - set debugfw environment variable
+
+  set debugfw "debugfw=usb start;usb start;fatload usb 0 0x84000000 uimage.gz;set bootargs console=ttyAS0,115200 bigphysarea=20000;bootm 0x84000000"
+
+  - you may type 'save' to store this settings permanently
+  - to execute the debugfw type 'run debugfw'
+  - note that the USB stick should be in the first (upper) USB connector
+
+Configuration
+
+  - dhcp client, telnetd, dropbear (ssh daemon) and minisatip are active by default
+  - configuration is stored in /etc/sysconfig/config

debug/README.md

@@ -1,37 +0,0 @@
-A notes for developers (might be outdated):
--------------------------------------------
-
-Requirements:
-
-  - git, python
-  - STLinux 2.4 (all-sh4-glibc) - http://www.stlinux.com - installed to /opt/STM/STLinux-2.4/
-  - fakeroot package/tools
-
-Compilation:
-
-  - just type 'make'
-  - kernel with rootfs is in kernel/arch/sh/boot/uImage.gz
-
-Booting uImage.gz on Inverto IDL-400S/Grundig GSS.BOX/Telestar Digibit R1 from USB:
-
-  - connect TTL USB serial adapter to J3 connector (4 pins at the power supply)
-    - pin 1 = 3.6V (do not use), pin 2 = GND, pin 3 = RXD (STM CPU), pin 4 = TXD (STM CPU)
-    - parameters: 115200,8N1
-  - press 'Enter' when you turn on the box (you have only one second) to get 'idl4k> ' prompt
-    (it seems that 'Enter' is required also to enable the serial console)
-  - modify bootargs (optional - for original firmware)
-
-  set bootargs=console=ttyAS0,115200
-
-  - set debugfw environment variable
-
-  set debugfw "debugfw=usb start;usb start;fatload usb 0 0x84000000 uimage.gz;set bootargs console=ttyAS0,115200 bigphysarea=20000;bootm 0x84000000"
-
-  - you may type 'save' to store this settings permanently
-  - to execute the debugfw type 'run debugfw'
-  - note that the USB stick should be in the first (upper) USB connector
-
-Configuration
-
-  - dhcp client, telnetd, dropbear (ssh daemon) and minisatip are active by default
-  - configuration is stored in /etc/sysconfig/config

dist/README

@@ -79,7 +79,6 @@ Customization:
   - if /etc/sysconfig/profile script exists, it is executed at login
   - writeable ftp - copy /etc/inetd.conf to /etc/sysconfig/inetd.conf and
     add -w argument to the ftpd daemon
-  - flash drives are automounted on /media
 
 httpd:
 ------
@@ -201,11 +200,6 @@ Notes:
   - the original firmware uses fw1-nand0 flash region (32M)
   - the satip-axe firmware uses fw2-nand0 flash region (32M)
   - data block is named data-nand0 - uses rest of flash
-  - the original firmware provides a web interface for administration, the
-    satip-axe uses local files for configuration.
-  - the original firmware provides a DLNA server. Within satip-axe the http
-    server can be used to provide for example channels maps in the form of
-    .m3u files
 
 Disclaimer:
 -----------
@@ -250,24 +244,19 @@ Bugs:
 History:
 --------
 
-satip-axe-201810211549-15 - Sun Oct 21 2018
+satip-axe-2018 - ??
-  - moved the releases (firmware files) to github
   - added minisatip8
-    - theaded mode is turned on by default (use -T to toggle)
     - updated minisatip code (latest minisatip 0.7.16)
     - note that some options were removed (-M) or added (-2)
     - follow /etc/config.default and this file
-    - fixed reported VDR problems (issue #108)
+    - fixed reported VDR problem (issue #108)
-    - added DVB-S2 multistream support
   - fixed the improper tuner release problem for complex diseqc settings
     where one input is used by multiple tuners (minisatip7 and minisatip8)
   - added SYSLOGD_OPTS to pass extra options to syslog
   - modified net.ipv4.tcp_wmem (issue #102)
   - increased net.core.wmem_max=12582912 , it might help to prevent
     the UDP packet loss (issue #88)
-  - partly fixed time sync (ntpd) issue when DHCP is used (issue #109)
+  - fixed time sync (ntpd) issue when DHCP is used (issue #109)
-  - upgraded python to 3.5.6 (package)
-  - upgraded oscam to rev.11434
 
 satip-axe-201705251044-14 - Wed Jun  7 2017
   - kernel modules from idl4k-1.25.0.157 (frontend + demux)

dist/minisatip.md

@@ -11,7 +11,7 @@ NOTE: Some options identifiers were changed between minisatip5 and minisatip7:
 minisatip7,8 | minisatip5/minisatip | description
 -------------|----------------------|-----------------------------------
 -7           | -L                   | tuner linking
--9           | -X                   | unicable input
+-9           | -X                   | unicable input (-S for minisatip8)
 -W           | -P                   | AXE power
 -8           | -Z                   | quattro hiband mode
 

fs-add/sbin/upgrade-fw

@@ -1,12 +1,11 @@
 #!/bin/sh
 
 FILE="$1"
-DOWNLOAD=""
 MTDDEV="/dev/mtd3"
 SAFEFILE="/root/new.fw"
 CHECKSTR="Linux-2.6.32.42_stm24_0208-idl4k"
-
+GITHUB1="https://github.com/perexg/satip-axe/tree/master/dist"
-GITHUB1="https://api.github.com/repos/perexg/satip-axe/releases"
+GITHUB2="https://github.com/perexg/satip-axe/blob/master/dist/$FILE?raw=true"
 
 if test "$PWD" != "/root" -a "$PWD" != "/"; then
   echo "Run this utility from / or /root directory"
@@ -18,65 +17,23 @@ if test "$FILE" = "-h" -o "$FILE" = "--help"; then
   exit 1
 fi
 
-if ! test -r "$FILE"; then
+if test -z "$FILE"; then
-  if test -z "$FILE"; then
   echo "Trying to fetch the list of available firmware files:"
-  else
+  if ! wget -q -O /root/list.txt "$GITHUB1"; then
-    echo "Trying to fetch the URL for the firmware:"
-  fi
-  if ! wget -q -O /root/list.json "$GITHUB1"; then
     echo "FAILED"
     exit 1
   fi
-  cat /root/list.json | grep -E '("name"|"browser_download_url")' | \
+  grep -o -E ">satip-axe-.*.fw<" /root/list.txt | grep -o -E "satip-axe.*.fw"
-                        grep -v -E '"name":.*.tgz' | \
+  rm /root/list.txt
-                        while IFS="\n" read line
-  do
-    case "$line" in
-      \ *\"name\":*)
-        name=$(echo "$line" | cut -d '"' -f 4)
-        ;;
-      \ *\"browser_download_url\":*)
-        fw=$(echo "$line" | cut -d '/' -f 9 | cut -d '"' -f 1 | cut -d '.' -f 1)
-        fw="$fw.fw"
-        if test -z "$FILE"; then
-          printf "%-40s : %s\n" "$name" "$fw"
-        else
-          if test "$FILE" = "$fw"; then
-            f=$(echo "$line" | cut -d '"' -f 4)
-            echo "$f" > /root/url.txt
-            printf "  %s\n" "$f"
-          fi
-        fi
-        name=''
-        ;;
-    esac
-  done
-  rm /root/list.json
-  if test -z "$FILE"; then
   exit 0
-  fi
-  if test -r /root/url.txt; then
-    DOWNLOAD=$(cat /root/url.txt)
-  fi
 fi
 
-if test -n "$DOWNLOAD"; then
+if ! test -r "$FILE"; then
-  echo "Downloading $FILE from $DOWNLOAD to $SAFEFILE:"
+  echo "Downloading $FILE:"
-  if ! wget -O - "$DOWNLOAD" | tar xOzf - "$FILE" > "$SAFEFILE"; then
+  if ! wget -O "$SAFEFILE" "$GITHUB2/$FILE"; then
-    echo "Unable to fetch firmware file $DOWNLOAD / $FILE"
+    echo "Unable to fetch firmware file $GITHUB2"
     exit 1
   fi
-  if ! test -r "$SAFEFILE"; then
-    echo "Unable to fetch firmware file $DOWNLOAD / $FILE"
-    exit 1
-  fi
-  FILESIZE=$(stat -c "%s" "$SAFEFILE")
-  if test -z "$FILESIZE" -o $FILESIZE -le 0; then
-    echo "Download failed (wrong file size)!"
-  else
-    echo "Downloaded firmware $FILE (file $SAFEFILE size $FILESIZE bytes)..."
-  fi
   FILE="$SAFEFILE"
 fi
 
@@ -112,7 +69,7 @@ while test 1 -eq 1; do
   nanddump -f "$SAFEFILE.old" -l "$FILESIZE" "$MTDDEV"
   FILESIZE2=$(stat -c "%s" "$SAFEFILE.old")
   if test "$FILESIZE" -gt "$FILESIZE2"; then
-    echo "Unable to verify (file sizes does not match - $FILESIZE > $FILESIZE2)"
+    echo "Unable to verify (file sizes does not match - $FILESIZE > $FILESIZE2"
     exit 1
   fi
   if ! dd if=/dev/null seek="$FILESIZE" bs=1 of="$SAFEFILE.old" 2> /dev/null; then
@@ -121,7 +78,7 @@ while test 1 -eq 1; do
   fi
   FILESIZE2=$(stat -c "%s" "$SAFEFILE.old")
   if test "$FILESIZE" != "$FILESIZE2"; then
-    echo "Unable to verify (file sizes does not match - $FILESIZE != $FILESIZE2)"
+    echo "Unable to verify (file sizes does not match - $FILESIZE != $FILESIZE2"
     exit 1
   fi
   result=$(diff "$SAFEFILE.old" "$SAFEFILE")

patches/python3-makefile.patch

@@ -1,6 +1,6 @@
---- Makefile.orig	2018-09-25 11:01:33.853198226 +0200
+--- Makefile.orig	2017-05-03 16:45:40.962475569 +0200
-+++ Makefile	2018-09-25 11:07:57.416371544 +0200
++++ Makefile	2017-05-03 16:48:52.644079190 +0200
-@@ -587,7 +587,7 @@
+@@ -618,7 +618,7 @@
  	    *) quiet="";; \
  	esac; \
  	$(RUNSHARED) CC='$(CC)' LDSHARED='$(BLDSHARED)' OPT='$(OPT)' \
@@ -9,7 +9,7 @@
  		$(PYTHON_FOR_BUILD) $(srcdir)/setup.py $$quiet build
  
  # Build static library
-@@ -697,6 +697,8 @@
+@@ -728,17 +728,19 @@
  ############################################################################
  # Importlib
  
@@ -18,35 +18,30 @@
  Programs/_freeze_importlib.o: Programs/_freeze_importlib.c Makefile
  
  Programs/_freeze_importlib: Programs/_freeze_importlib.o $(LIBRARY_OBJS_OMIT_FROZEN)
-@@ -706,12 +708,12 @@
+ 	$(LINKCC) $(PY_LDFLAGS) -o $@ Programs/_freeze_importlib.o $(LIBRARY_OBJS_OMIT_FROZEN) $(LIBS) $(MODLIBS) $(SYSLIBS) $(LDLAST)
- regen-importlib: Programs/_freeze_importlib
+ 
- 	# Regenerate Python/importlib_external.h
+ Python/importlib_external.h: # $(srcdir)/Lib/importlib/_bootstrap_external.py Programs/_freeze_importlib
- 	# from Lib/importlib/_bootstrap_external.py using _freeze_importlib
 -	./Programs/_freeze_importlib \
 +	$(FREEZE_IMPORTLIB) \
- 	    $(srcdir)/Lib/importlib/_bootstrap_external.py \
+ 	    $(srcdir)/Lib/importlib/_bootstrap_external.py Python/importlib_external.h
- 	    $(srcdir)/Python/importlib_external.h
+ 
- 	# Regenerate Python/importlib.h from Lib/importlib/_bootstrap.py
+ Python/importlib.h: # $(srcdir)/Lib/importlib/_bootstrap.py Programs/_freeze_importlib
- 	# using _freeze_importlib
 -	./Programs/_freeze_importlib \
 +	$(FREEZE_IMPORTLIB) \
- 	    $(srcdir)/Lib/importlib/_bootstrap.py \
+ 	    $(srcdir)/Lib/importlib/_bootstrap.py Python/importlib.h
- 	    $(srcdir)/Python/importlib.h
  
-@@ -778,11 +780,8 @@
  
- $(IO_OBJS): $(IO_H)
+@@ -805,9 +807,6 @@
+ $(GRAMMAR_C): # $(GRAMMAR_H)
+ 	touch $(GRAMMAR_C)
  
 -$(PGEN): $(PGENOBJS)
 -		$(CC) $(OPT) $(PY_LDFLAGS) $(PGENOBJS) $(LIBS) -o $(PGEN)
 -
- .PHONY: regen-grammar
+ Parser/grammar.o:	$(srcdir)/Parser/grammar.c \
--regen-grammar: $(PGEN)
+ 				$(srcdir)/Include/token.h \
-+regen-grammar:
+ 				$(srcdir)/Include/grammar.h
- 	# Regenerate Include/graminit.h and Python/graminit.c
+@@ -1620,7 +1619,7 @@
- 	# from Grammar/Grammar using pgen
- 	@$(MKDIR_P) Include
-@@ -1625,7 +1624,7 @@
  	rm -rf $(COVERAGE_REPORT)
  
  clobber: clean profile-removal

tools/i2c_mangle.c

@@ -14,8 +14,6 @@
 
 #define STV6120_1 (0xc0 >> 1)
 #define STV6120_2 (0xc6 >> 1)
-#define STV0900_1 (0xd0 >> 1)
-#define STV0900_2 (0xd2 >> 1)
 
 extern int (*i2c_transfer_mangle)(struct i2c_adapter *adap, struct i2c_msg *msg, int num);
 int i2c_transfer2(struct i2c_adapter *adap, struct i2c_msg *msg, int num);
@@ -24,34 +22,17 @@ static struct i2c_adapter *i2c_adapter0;
 static int i2c_mangle_enable = 1;
 static int i2c_mangle_debug = 0;
 static int stv6120_gain = 8;
-static int stv0900_mis[4] = { -1, -1, -1, -1 };
-static int stv0900_pls[4] = { 1, 1, 1, 1 }; /* ROOT code 1 is equal to GOLD code 0 */
 
 static void i2c_transfer_axe_dump(struct i2c_msg *msgs, int num)
 {
-	struct i2c_msg *m;
 	int ret;
-	u8 *b;
 
 	for (ret = 0; ret < num; ret++) {
-		m = msgs + ret;
-		b = m->buf;
 		printk("i2c master_xfer[%d] %c, addr=0x%02x, "
-			"len=%d%s, flags=0x%04x, "
+			"len=%d%s, flags=0x%x\n", ret, (msgs[ret].flags & I2C_M_RD)
-			"data[%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x]\n",
+			? 'R' : 'W', msgs[ret].addr, msgs[ret].len,
-			ret,
+			(msgs[ret].flags & I2C_M_RECV_LEN) ? "+" : "",
-			(m->flags & I2C_M_RD) ? 'R' : 'W',
+			msgs[ret].flags);
-			m->addr, m->len,
-			(m->flags & I2C_M_RECV_LEN) ? "+" : "",
-			m->flags,
-			m->len > 0 ? b[0] : 0,
-			m->len > 1 ? b[1] : 0,
-			m->len > 2 ? b[2] : 0,
-			m->len > 3 ? b[3] : 0,
-			m->len > 4 ? b[4] : 0,
-			m->len > 5 ? b[5] : 0,
-			m->len > 6 ? b[6] : 0,
-			m->len > 7 ? b[7] : 0);
 	}
 }
 
@@ -67,60 +48,7 @@ static void mangle(u8 *dst, struct i2c_msg *m, int i, int val, int shift, int ma
 		m->buf = dst;
 }
 
-#define REG_SET3(b1, b2, b3) \
+static void i2c_transfer_axe_mangle(struct i2c_msg *msgs, int num)
-	do { buf[num][0] = b1; buf[num][1] = b2; buf[num][2] = b3; num++; } while (0)
-
-static void demod_set_pls_and_mis(struct i2c_adapter *adap, struct i2c_msg *src, int p)
-{
-	struct i2c_msg m[6];
-	u8 buf[6][3];
-	int num = 0, r, mis, idx = p ? 1 : 0;
-	u32 pls;
-	u8 iaddr = p ? 0xf3 : 0xf5;
-
-	switch (src->addr) {
-	case STV0900_1: idx += 0; break;
-	case STV0900_2: idx += 2; break;
-	default: return;
-	}
-
-	mis = stv0900_mis[idx];
-	if (mis >= 0 && mis <= 255) {
-		/* PDELCTRL1 - enable filter */
-		REG_SET3(iaddr, 0x50, 0x20);
-		/* ISIENTRY */
-		REG_SET3(iaddr, 0x5e, mis);
-		/* ISIBITENA */
-		REG_SET3(iaddr, 0x5f, 0xff);
-	} else {
-		/* SWRST */
-		REG_SET3(iaddr, 0x72, 0xd1);
-		/* PDELCTRL1 - disable filter */
-		REG_SET3(iaddr, 0x50, 0x00);
-	}
-
-	/* set PLS code and mode (upper three bits) */
-	pls = stv0900_pls[idx];
-	REG_SET3(iaddr-1, 0xae, pls);			/* PLROOT0 */
-	REG_SET3(iaddr-1, 0xad, pls >> 8);		/* PLROOT1 */
-	REG_SET3(iaddr-1, 0xac, (pls >> 16) & 0x0f);	/* PLROOT3 */
-	if (i2c_mangle_debug & 4)
-		printk("i2c idx=%d: pls=%d mode=%d mis=%d\n", idx,
-			pls & 0x3ffff, (pls >> 18) & 3, mis);
-
-	for (r = 0; r < num; r++) {
-		m[r] = *src;
-		m[r].len = 3;
-		m[r].buf = buf[r];
-	}
-	if (i2c_mangle_debug & 1)
-		i2c_transfer_axe_dump(m, num);
-	r = i2c_transfer2(adap, m, num);
-	if (r < 0)
-		printk("i2c mangle demod pls and mis error! (%d)\n", r);
-}
-
-static void i2c_transfer_axe_mangle(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 {
 	static u8 mbuf[4][32];
 	struct i2c_msg *m;
@@ -130,27 +58,20 @@ static void i2c_transfer_axe_mangle(struct i2c_adapter *adap, struct i2c_msg *ms
 		m = msgs + ret;
 		if (m->len < 1 || (m->flags & I2C_M_RD) != 0)
 			continue;
-		if (m->addr == STV6120_1 || m->addr == STV6120_2) {
+		if (m->addr == STV6120_1 || m->addr == STV6120_2)
 			for (r = m->buf[0], i = 1; i < m->len; i++, r++)
 				if (r == 0x01 || r == 0x0b)
 					mangle(mbuf[ret], m, i, stv6120_gain, 0, 0x0f);
-		} else if (m->addr == STV0900_1 || m->addr == STV0900_2) {
-			/* inject pls/mis settings before TSCFGH path merger reset */
-			if (m->flags == 0 && m->len == 3 &&
-			    (m->buf[0] == 0xf3 || m->buf[0] == 0xf5) &&
-			    m->buf[1] == 0x72 && m->buf[2] == 0xd1)
-				demod_set_pls_and_mis(adap, m, m->buf[0] == 0xf3);
-		}
 	}
 }
 
 static int i2c_transfer_axe(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 {
 	if (adap == i2c_adapter0) {
-		if (i2c_mangle_enable)
-			i2c_transfer_axe_mangle(adap, msgs, num);
 		if (i2c_mangle_debug & 1)
 			i2c_transfer_axe_dump(msgs, num);
+		if (i2c_mangle_enable)
+			i2c_transfer_axe_mangle(msgs, num);
 	}
 	return i2c_transfer2(adap, msgs, num);
 }
@@ -219,166 +140,6 @@ static DEVICE_ATTR(stv6120_gain, 0644,
 		   stv6120_gain_show,
 		   stv6120_gain_store);
 
-static ssize_t stv0900_mis1_show
-  (struct device *dev, struct device_attribute *attr, char *page)
-{
-	return sprintf(page, "%i\n", stv0900_mis[0]);
-}
-
-static ssize_t stv0900_mis1_store
-  (struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	int val = 0;
-	if (sscanf(buf, "%i", &val) != 1)
-		return -EINVAL;
-	stv0900_mis[0] = val;
-	return count;
-}
-
-static DEVICE_ATTR(stv0900_mis1, 0644,
-		   stv0900_mis1_show,
-		   stv0900_mis1_store);
-
-static ssize_t stv0900_mis2_show
-  (struct device *dev, struct device_attribute *attr, char *page)
-{
-	return sprintf(page, "%i\n", stv0900_mis[1]);
-}
-
-static ssize_t stv0900_mis2_store
-  (struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	int val = 0;
-	if (sscanf(buf, "%i", &val) != 1)
-		return -EINVAL;
-	stv0900_mis[1] = val;
-	return count;
-}
-
-static DEVICE_ATTR(stv0900_mis2, 0644,
-		   stv0900_mis2_show,
-		   stv0900_mis2_store);
-
-static ssize_t stv0900_mis3_show
-  (struct device *dev, struct device_attribute *attr, char *page)
-{
-	return sprintf(page, "%i\n", stv0900_mis[2]);
-}
-
-static ssize_t stv0900_mis3_store
-  (struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	int val = 0;
-	if (sscanf(buf, "%i", &val) != 1)
-		return -EINVAL;
-	stv0900_mis[2] = val;
-	return count;
-}
-
-static DEVICE_ATTR(stv0900_mis3, 0644,
-		   stv0900_mis3_show,
-		   stv0900_mis3_store);
-
-static ssize_t stv0900_mis4_show
-  (struct device *dev, struct device_attribute *attr, char *page)
-{
-	return sprintf(page, "%i\n", stv0900_mis[3]);
-}
-
-static ssize_t stv0900_mis4_store
-  (struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	int val = 0;
-	if (sscanf(buf, "%i", &val) != 1)
-		return -EINVAL;
-	stv0900_mis[3] = val;
-	return count;
-}
-
-static DEVICE_ATTR(stv0900_mis4, 0644,
-		   stv0900_mis4_show,
-		   stv0900_mis4_store);
-
-static ssize_t stv0900_pls1_show
-  (struct device *dev, struct device_attribute *attr, char *page)
-{
-	return sprintf(page, "%i\n", stv0900_pls[0]);
-}
-
-static ssize_t stv0900_pls1_store
-  (struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	int val = 0;
-	if (sscanf(buf, "%i", &val) != 1)
-		return -EINVAL;
-	stv0900_pls[0] = val;
-	return count;
-}
-
-static DEVICE_ATTR(stv0900_pls1, 0644,
-		   stv0900_pls1_show,
-		   stv0900_pls1_store);
-
-static ssize_t stv0900_pls2_show
-  (struct device *dev, struct device_attribute *attr, char *page)
-{
-	return sprintf(page, "%i\n", stv0900_pls[1]);
-}
-
-static ssize_t stv0900_pls2_store
-  (struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	int val = 0;
-	if (sscanf(buf, "%i", &val) != 1)
-		return -EINVAL;
-	stv0900_pls[1] = val;
-	return count;
-}
-
-static DEVICE_ATTR(stv0900_pls2, 0644,
-		   stv0900_pls2_show,
-		   stv0900_pls2_store);
-
-static ssize_t stv0900_pls3_show
-  (struct device *dev, struct device_attribute *attr, char *page)
-{
-	return sprintf(page, "%i\n", stv0900_pls[2]);
-}
-
-static ssize_t stv0900_pls3_store
-  (struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	int val = 0;
-	if (sscanf(buf, "%i", &val) != 1)
-		return -EINVAL;
-	stv0900_pls[2] = val;
-	return count;
-}
-
-static DEVICE_ATTR(stv0900_pls3, 0644,
-		   stv0900_pls3_show,
-		   stv0900_pls3_store);
-
-static ssize_t stv0900_pls4_show
-  (struct device *dev, struct device_attribute *attr, char *page)
-{
-	return sprintf(page, "%i\n", stv0900_pls[3]);
-}
-
-static ssize_t stv0900_pls4_store
-  (struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	int val = 0;
-	if (sscanf(buf, "%i", &val) != 1)
-		return -EINVAL;
-	stv0900_pls[3] = val;
-	return count;
-}
-
-static DEVICE_ATTR(stv0900_pls4, 0644,
-		   stv0900_pls4_show,
-		   stv0900_pls4_store);
-
 static void sysfs_create_entries(void)
 {
 	struct kobject *kobj = &i2c_adapter0->dev.kobj;
@@ -386,14 +147,6 @@ static void sysfs_create_entries(void)
 	sysfs_create_file(kobj, &dev_attr_i2c_mangle_enable.attr);
 	sysfs_create_file(kobj, &dev_attr_i2c_mangle_debug.attr);
 	sysfs_create_file(kobj, &dev_attr_stv6120_gain.attr);
-	sysfs_create_file(kobj, &dev_attr_stv0900_mis1.attr);
-	sysfs_create_file(kobj, &dev_attr_stv0900_mis2.attr);
-	sysfs_create_file(kobj, &dev_attr_stv0900_mis3.attr);
-	sysfs_create_file(kobj, &dev_attr_stv0900_mis4.attr);
-	sysfs_create_file(kobj, &dev_attr_stv0900_pls1.attr);
-	sysfs_create_file(kobj, &dev_attr_stv0900_pls2.attr);
-	sysfs_create_file(kobj, &dev_attr_stv0900_pls3.attr);
-	sysfs_create_file(kobj, &dev_attr_stv0900_pls4.attr);
 }
 
 static void sysfs_remove_entries(void)
@@ -403,14 +156,6 @@ static void sysfs_remove_entries(void)
 	sysfs_remove_file(kobj, &dev_attr_i2c_mangle_enable.attr);
 	sysfs_remove_file(kobj, &dev_attr_i2c_mangle_debug.attr);
 	sysfs_remove_file(kobj, &dev_attr_stv6120_gain.attr);
-	sysfs_remove_file(kobj, &dev_attr_stv0900_mis1.attr);
-	sysfs_remove_file(kobj, &dev_attr_stv0900_mis2.attr);
-	sysfs_remove_file(kobj, &dev_attr_stv0900_mis3.attr);
-	sysfs_remove_file(kobj, &dev_attr_stv0900_mis4.attr);
-	sysfs_remove_file(kobj, &dev_attr_stv0900_pls1.attr);
-	sysfs_remove_file(kobj, &dev_attr_stv0900_pls2.attr);
-	sysfs_remove_file(kobj, &dev_attr_stv0900_pls3.attr);
-	sysfs_remove_file(kobj, &dev_attr_stv0900_pls4.attr);
 }
 
 /*

tools/multicast-rtp

@@ -2,7 +2,6 @@
 #
 # Tiny SAT>IP client which activates multicast streaming.
 #
-# Use command line parameters of
 # Create /etc/sysconfig/multicast file with syntax:
 #
 # <mport>:<satip-params>
@@ -10,12 +9,12 @@
 # You can modify this file when the program is active and
 # reload the configuration using the SIGHUP signal.
 #
-# Configuration Example:
+# Example:
 #
-# # Channel 1 on multicast port 5554, using first orbital position
+# # Channel 1 on multicast port 5554, using first tuner (fe=1)
-# 5554:src=1&freq=11347&pol=v&ro=0.35&msys=dvbs2&\
+# 5554:fe=1&src=1&freq=12525&sr=27500&\
-#      mtype=8psk&plts=on&sr=22000&fec=23&\
+#      msys=dvbs&mtype=qpsk&pol=v&fec=34&\
-#      pids=0,17,18,6600,6610,6620,6630
+#      pids=0,1,16,17,18,52,57,100,104,165,299,1029,3002,3003
 #
 # The SAT>IP parameters should match the SAT>IP specification:
 #   http://www.satip.info/resources
@@ -24,100 +23,27 @@
 # option -r <ipv4_mcast> or --remote-rtp <ipv4_mcast>. By default,
 # this address is 239.255.255.250.
 #
-# Command-line example:
-#
-# ./multicast-rtp \
-#   -s 192.168.1.100:554 -d 239.0.0.1 -p 5554 \
-#   -u "src=1&freq=11347&pol=v&ro=0.35&msys=dvbs2&mtype=8psk&plts=on&sr=22000&fec=23&pids=0,17,18,6600,6610,6620,6630"
-#
-# Note: The SAT>IP server needs to support "target" spoofing
-# and multicast address as "unicast" (minisatip project does it)
-#
 
 import os
 import signal
 import functools
 import asyncio
 import syslog
-import argparse,sys
-import signal
 
-VERSION='0.2'
+VERSION='0.1'
-SYSLOG=False
 SERVER='127.0.0.1:554'
-CONFIG=''
+CONFIG='/etc/sysconfig/multicast'
-REQUEST=''
+SYSLOG=True
-TARGET_ADDR=''
+if not os.path.exists('/etc/init.d/axe-settings'):
-TARGET_PORT=0
+  SERVER='gssbox1:554'
-USE_CONFIG=True
+  CONFIG='multicast'
-QUIET=False
+  SYSLOG=False
-
-#
-# Command line parameters
-#
-
-parser = argparse.ArgumentParser(description='Request multicast streaming from a SAT>IP server.')
-parser.add_argument('-q', '--quiet', dest='quiet',
-  action='store_true',
-  help='quiet display option')
-parser.add_argument('-l', '--syslog', dest='syslog',
-  action='store_true',
-  help='enable System LOG')
-parser.add_argument('-s', '--server', dest='server',
-  required=True,
-  help='server to connect')
-parser.add_argument('-d', '--destination', dest='addr',
-  default='',
-  help='target address  (Note: Only if server accept it!)')
-parser.add_argument('-p', '--port', dest='port', type=int,
-  default=10000,
-  help='target port  (default: 10000)')
-group = parser.add_mutually_exclusive_group(required=True)
-group.add_argument('-u', '--uri', dest='uri',
-  default='',
-  help='URI to request')
-group.add_argument('-c', '--config', dest='config',
-  default='/etc/sysconfig/multicast',
-  help='config file with static multicast streams  (default: /etc/sysconfig/multicast)')
-
-args = parser.parse_args()
-
-SYSLOG = args.syslog
-
-if args.port > 0 and args.port < 65536 :
-  TARGET_PORT = args.port
-else :
-  parser.print_help()
-  sys.exit()
-
-if len(args.server) > 0 :
-  SERVER = args.server
-else :
-  parser.print_help()
-  sys.exit()
-
-if len(args.uri) > 0 :
-  REQUEST = args.uri
-elif len(args.config) > 0 :
-  CONFIG = args.config
-else :
-  parser.print_help()
-  sys.exit()
-
-TARGET_ADDR = args.addr
-QUIET = args.quiet
-
-if len(REQUEST) > 0 :
-  USE_CONFIG = False
 
 #
 #
 #
 
-
 def log(msg):
-  if QUIET :
-    return
   if SYSLOG:
     syslog.syslog(msg)
   else:
@@ -154,19 +80,14 @@ class RTSP_Protocol:
       s = 'rtsp://%s:%d/?%s' % (peer[0], peer[1], self.params)
       log('%d (open): %s' % (self.mport, s))
       msg = 'SETUP ' + s + ' RTSP/1.0\r\n'
-      if len(REQUEST) > 0 :
-        msg += 'Transport: RTP/AVP;unicast;destination=%s;client_port=%d-%d\r\n' % (TARGET_ADDR, self.mport, self.mport + 1)
-      else :
       msg += 'Transport: RTP/AVP;multicast;port=%d-%d\r\n' % (self.mport, self.mport + 1)
       msg += 'CSeq: 1\r\n\r\n'
-      log(' -----> : %s' % msg)
       transport.write(msg.encode())
       self.action = 'PLAY'
 
   def data_received(self, data):
     if not self.transport:
       return
-    log(' <----- : %s' % data)
     lines = data.decode("utf-8").splitlines()
     if lines[0] != 'RTSP/1.0 200 OK':
       return self.retry()
@@ -210,10 +131,6 @@ class RTSP_Protocol:
       self.cseq = 2
     elif self.action == 'OPTIONS' and self.cseq == 2:
       log('%d (play): OK' % self.mport)
-    elif self.action == 'TEARDOWN':
-      log('%d (close): OK' % self.mport)
-      self.retry()
-      return
 
   def options(self):
     if not self.transport:
@@ -227,19 +144,6 @@ class RTSP_Protocol:
       self.transport.write(msg.encode())
       self.client.loop.call_at(loop.time() + self.timeout/2, self.options)
 
-  def teardown(self):
-    self.action = 'TEARDOWN'
-    if not self.transport:
-      return
-    peer = self.transport._sock.getpeername()
-    log('%d (teardown): Session %s, streamID %d' % (self.mport, self.session, self.streamID))
-    self.cseq += 1
-    msg = 'TEARDOWN rtsp://%s:%d/stream=%d RTSP/1.0\r\n' % (peer[0], peer[1], self.streamID)
-    msg += 'Session: %s\r\n' % self.session
-    msg += 'CSeq: %d\r\n\r\n' % self.cseq
-    self.transport.write(msg.encode())
-    self.client.loop.call_at(loop.time() + 1, self.retry)
-
   def eof_received(self):
     self.connection_lost(None)
 
@@ -255,7 +159,7 @@ class RTSP_Protocol:
 
   def fatal(self):
     if self.transport:
-      self.teardown()
+      self.transport.close()
     self.client.protocol = None
     self.client.fatal()
 
@@ -291,7 +195,7 @@ class RTSP_Client:
     log("Remove multicast client: %s" % self.params)
     self.dead = True
     if self.protocol:
-      self.protocol.teardown()
+      self.protocol.fatal()
     self.clients.remove_client(self)
 
 #
@@ -303,12 +207,8 @@ class RTSP_Clients:
   def __init__(self, loop):
     self.loop = loop
     self.clients = []
-    if USE_CONFIG :
     self.parse_config_file()
     hupfcn = lambda: self.parse_config_file()
-    else :
-      self.parse_request()
-      hupfcn = lambda: self.parse_request()
     loop.add_signal_handler(signal.SIGHUP,
                             functools.partial(hupfcn))
 
@@ -324,23 +224,6 @@ class RTSP_Clients:
         return
     self.clients.append(RTSP_Client(self, params))
 
-  async def close_all(self):
-    for c in self.clients:
-      c.fatal()
-
-  def parse_request(self):
-    # mark clients
-    for c in self.clients:
-      c.deleteme = True
-    # parse command line
-    l = str(TARGET_PORT) + ':' + REQUEST
-    #print("parse_request: " + l)
-    self.add_client(l)
-    # remove marked clients
-    for c in self.clients:
-      if c.deleteme:
-        self.remove_client(c)
-
   def parse_config_file(self):
     # mark clients
     for c in self.clients:
@@ -368,43 +251,17 @@ class RTSP_Clients:
         self.remove_client(c)
 
 #
-# configuration
+# configuration file
 #
 
 if SYSLOG:
   syslog.openlog('multicast-rtp', 0, syslog.LOG_LOCAL7)
-
-silent = QUIET
-if QUIET :
-  QUIET = False
 log('Version %s' % VERSION)
-log('SERVER: %s' % SERVER)
-log('CONFIG: %s' % CONFIG)
-log('TARGET: %s:%d' % (TARGET_ADDR, TARGET_PORT))
-log('REQUEST: %s' % REQUEST)
-log('------------')
-if silent :
-  log(' Start.')
-  QUIET = True
-
 loop = asyncio.get_event_loop()
-loop.add_signal_handler(signal.SIGTERM, signal.getsignal(signal.SIGINT))
-
 clients = RTSP_Clients(loop)
-
 try:
     loop.run_forever()
-except (KeyboardInterrupt, SystemExit) as e:
-##  Send TEARDOWN before exit!
-    log(' Closing.')
-    loop.run_until_complete(clients.close_all())
-    loop.run_until_complete(asyncio.sleep(1.0))
-except:
-    print('*******')
 finally:
-    QUIET = False
-    log(' Stop.')
     loop.close()
 if SYSLOG:
   syslog.closelog()
-sys.exit(0)