# # SATIP AXE firmware configuration # CFGVER="10" HOSTNAME="satip-axe" KMODULES="drivers/usb/serial/cp210x.ko drivers/usb/serial/pl2303.ko drivers/usb/serial/ftdi_sio.ko" # # STV6210 baseband amplifier gain (0dB .. 16dB - 2dB step) # STV6210_BAMP="16dB" #DEMUXTS_OLD="yes" # # ttyUSB names # TTYUSB1_DEV="2-1:1.0" TTYUSB1_NAME="ttyUSBupper" TTYUSB2_DEV="4-1:1.0" TTYUSB2_NAME="ttyUSBlower" TTYUSB3_DEV="1-1.1:1.0" # USB hub port#1 in upper port TTYUSB3_NAME="ttyUSBupper1" TTYUSB4_DEV="3-1.2:1.0" # USB hub port#2 in lower port TTYUSB4_NAME="ttyUSBlower2" # # IPV4 config # IPV4="dhcp" # or #IPV4="192.168.1.240" #IPV4_NETMASK="255.255.255.0" #IPV4_BROADCAST="192.168.1.255" #IPV4_GATEWAY="192.168.1.1" # # ntpd # NTPD_OPTS="-p 0.pool.ntp.org" # # telnetd # TELNETD="yes" # # dropbear # DROPBEAR="yes" # # minisatip # MINISATIP="yes" MINISATIP_OPTS="" # # inetd (httpd,ftpd) # INETD="yes" # # crond # CROND="yes" # # nfsd v3 # NFSD="yes" NFSD_HOTPLUG_EXPORT="*" # replace with host or subnet, '*' = world # # oscamd # OSCAMD="yes" # # custom daemon/service/setup executed from sysinit # #CUSTOMD="/etc/sysconfig/myboot"