583 lines
15 KiB
C
583 lines
15 KiB
C
/*
|
|
* Support for OR51211 (pcHDTV HD-2000) - VSB
|
|
*
|
|
* Copyright (C) 2005 Kirk Lapray <kirk_lapray@bigfoot.com>
|
|
*
|
|
* Based on code from Jack Kelliher (kelliher@xmission.com)
|
|
* Copyright (C) 2002 & pcHDTV, inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* This driver needs external firmware. Please use the command
|
|
* "<kerneldir>/Documentation/dvb/get_dvb_firmware or51211" to
|
|
* download/extract it, and then copy it to /usr/lib/hotplug/firmware
|
|
* or /lib/firmware (depending on configuration of firmware hotplug).
|
|
*/
|
|
#define OR51211_DEFAULT_FIRMWARE "dvb-fe-or51211.fw"
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/device.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/string.h>
|
|
#include <linux/slab.h>
|
|
#include <asm/byteorder.h>
|
|
|
|
#include "dvb_math.h"
|
|
#include "dvb_frontend.h"
|
|
#include "or51211.h"
|
|
|
|
static int debug;
|
|
#define dprintk(args...) \
|
|
do { \
|
|
if (debug) printk(KERN_DEBUG "or51211: " args); \
|
|
} while (0)
|
|
|
|
static u8 run_buf[] = {0x7f,0x01};
|
|
static u8 cmd_buf[] = {0x04,0x01,0x50,0x80,0x06}; // ATSC
|
|
|
|
struct or51211_state {
|
|
|
|
struct i2c_adapter* i2c;
|
|
|
|
/* Configuration settings */
|
|
const struct or51211_config* config;
|
|
|
|
struct dvb_frontend frontend;
|
|
struct bt878* bt;
|
|
|
|
/* Demodulator private data */
|
|
u8 initialized:1;
|
|
u32 snr; /* Result of last SNR claculation */
|
|
|
|
/* Tuner private data */
|
|
u32 current_frequency;
|
|
};
|
|
|
|
static int i2c_writebytes (struct or51211_state* state, u8 reg, const u8 *buf,
|
|
int len)
|
|
{
|
|
int err;
|
|
struct i2c_msg msg;
|
|
msg.addr = reg;
|
|
msg.flags = 0;
|
|
msg.len = len;
|
|
msg.buf = (u8 *)buf;
|
|
|
|
if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
|
|
printk(KERN_WARNING "or51211: i2c_writebytes error "
|
|
"(addr %02x, err == %i)\n", reg, err);
|
|
return -EREMOTEIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_readbytes(struct or51211_state *state, u8 reg, u8 *buf, int len)
|
|
{
|
|
int err;
|
|
struct i2c_msg msg;
|
|
msg.addr = reg;
|
|
msg.flags = I2C_M_RD;
|
|
msg.len = len;
|
|
msg.buf = buf;
|
|
|
|
if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
|
|
printk(KERN_WARNING "or51211: i2c_readbytes error "
|
|
"(addr %02x, err == %i)\n", reg, err);
|
|
return -EREMOTEIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int or51211_load_firmware (struct dvb_frontend* fe,
|
|
const struct firmware *fw)
|
|
{
|
|
struct or51211_state* state = fe->demodulator_priv;
|
|
u8 tudata[585];
|
|
int i;
|
|
|
|
dprintk("Firmware is %zd bytes\n",fw->size);
|
|
|
|
/* Get eprom data */
|
|
tudata[0] = 17;
|
|
if (i2c_writebytes(state,0x50,tudata,1)) {
|
|
printk(KERN_WARNING "or51211:load_firmware error eprom addr\n");
|
|
return -1;
|
|
}
|
|
if (i2c_readbytes(state,0x50,&tudata[145],192)) {
|
|
printk(KERN_WARNING "or51211: load_firmware error eprom\n");
|
|
return -1;
|
|
}
|
|
|
|
/* Create firmware buffer */
|
|
for (i = 0; i < 145; i++)
|
|
tudata[i] = fw->data[i];
|
|
|
|
for (i = 0; i < 248; i++)
|
|
tudata[i+337] = fw->data[145+i];
|
|
|
|
state->config->reset(fe);
|
|
|
|
if (i2c_writebytes(state,state->config->demod_address,tudata,585)) {
|
|
printk(KERN_WARNING "or51211: load_firmware error 1\n");
|
|
return -1;
|
|
}
|
|
msleep(1);
|
|
|
|
if (i2c_writebytes(state,state->config->demod_address,
|
|
&fw->data[393],8125)) {
|
|
printk(KERN_WARNING "or51211: load_firmware error 2\n");
|
|
return -1;
|
|
}
|
|
msleep(1);
|
|
|
|
if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) {
|
|
printk(KERN_WARNING "or51211: load_firmware error 3\n");
|
|
return -1;
|
|
}
|
|
|
|
/* Wait at least 5 msec */
|
|
msleep(10);
|
|
if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) {
|
|
printk(KERN_WARNING "or51211: load_firmware error 4\n");
|
|
return -1;
|
|
}
|
|
msleep(10);
|
|
|
|
printk("or51211: Done.\n");
|
|
return 0;
|
|
};
|
|
|
|
static int or51211_setmode(struct dvb_frontend* fe, int mode)
|
|
{
|
|
struct or51211_state* state = fe->demodulator_priv;
|
|
u8 rec_buf[14];
|
|
|
|
state->config->setmode(fe, mode);
|
|
|
|
if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) {
|
|
printk(KERN_WARNING "or51211: setmode error 1\n");
|
|
return -1;
|
|
}
|
|
|
|
/* Wait at least 5 msec */
|
|
msleep(10);
|
|
if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) {
|
|
printk(KERN_WARNING "or51211: setmode error 2\n");
|
|
return -1;
|
|
}
|
|
|
|
msleep(10);
|
|
|
|
/* Set operation mode in Receiver 1 register;
|
|
* type 1:
|
|
* data 0x50h Automatic sets receiver channel conditions
|
|
* Automatic NTSC rejection filter
|
|
* Enable MPEG serial data output
|
|
* MPEG2tr
|
|
* High tuner phase noise
|
|
* normal +/-150kHz Carrier acquisition range
|
|
*/
|
|
if (i2c_writebytes(state,state->config->demod_address,cmd_buf,3)) {
|
|
printk(KERN_WARNING "or51211: setmode error 3\n");
|
|
return -1;
|
|
}
|
|
|
|
rec_buf[0] = 0x04;
|
|
rec_buf[1] = 0x00;
|
|
rec_buf[2] = 0x03;
|
|
rec_buf[3] = 0x00;
|
|
msleep(20);
|
|
if (i2c_writebytes(state,state->config->demod_address,rec_buf,3)) {
|
|
printk(KERN_WARNING "or51211: setmode error 5\n");
|
|
}
|
|
msleep(3);
|
|
if (i2c_readbytes(state,state->config->demod_address,&rec_buf[10],2)) {
|
|
printk(KERN_WARNING "or51211: setmode error 6");
|
|
return -1;
|
|
}
|
|
dprintk("setmode rec status %02x %02x\n",rec_buf[10],rec_buf[11]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int or51211_set_parameters(struct dvb_frontend* fe,
|
|
struct dvb_frontend_parameters *param)
|
|
{
|
|
struct or51211_state* state = fe->demodulator_priv;
|
|
|
|
/* Change only if we are actually changing the channel */
|
|
if (state->current_frequency != param->frequency) {
|
|
if (fe->ops.tuner_ops.set_params) {
|
|
fe->ops.tuner_ops.set_params(fe, param);
|
|
if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
|
|
}
|
|
|
|
/* Set to ATSC mode */
|
|
or51211_setmode(fe,0);
|
|
|
|
/* Update current frequency */
|
|
state->current_frequency = param->frequency;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int or51211_read_status(struct dvb_frontend* fe, fe_status_t* status)
|
|
{
|
|
struct or51211_state* state = fe->demodulator_priv;
|
|
unsigned char rec_buf[2];
|
|
unsigned char snd_buf[] = {0x04,0x00,0x03,0x00};
|
|
*status = 0;
|
|
|
|
/* Receiver Status */
|
|
if (i2c_writebytes(state,state->config->demod_address,snd_buf,3)) {
|
|
printk(KERN_WARNING "or51132: read_status write error\n");
|
|
return -1;
|
|
}
|
|
msleep(3);
|
|
if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) {
|
|
printk(KERN_WARNING "or51132: read_status read error\n");
|
|
return -1;
|
|
}
|
|
dprintk("read_status %x %x\n",rec_buf[0],rec_buf[1]);
|
|
|
|
if (rec_buf[0] & 0x01) { /* Receiver Lock */
|
|
*status |= FE_HAS_SIGNAL;
|
|
*status |= FE_HAS_CARRIER;
|
|
*status |= FE_HAS_VITERBI;
|
|
*status |= FE_HAS_SYNC;
|
|
*status |= FE_HAS_LOCK;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* Calculate SNR estimation (scaled by 2^24)
|
|
|
|
8-VSB SNR equation from Oren datasheets
|
|
|
|
For 8-VSB:
|
|
SNR[dB] = 10 * log10(219037.9454 / MSE^2 )
|
|
|
|
We re-write the snr equation as:
|
|
SNR * 2^24 = 10*(c - 2*intlog10(MSE))
|
|
Where for 8-VSB, c = log10(219037.9454) * 2^24 */
|
|
|
|
static u32 calculate_snr(u32 mse, u32 c)
|
|
{
|
|
if (mse == 0) /* No signal */
|
|
return 0;
|
|
|
|
mse = 2*intlog10(mse);
|
|
if (mse > c) {
|
|
/* Negative SNR, which is possible, but realisticly the
|
|
demod will lose lock before the signal gets this bad. The
|
|
API only allows for unsigned values, so just return 0 */
|
|
return 0;
|
|
}
|
|
return 10*(c - mse);
|
|
}
|
|
|
|
static int or51211_read_snr(struct dvb_frontend* fe, u16* snr)
|
|
{
|
|
struct or51211_state* state = fe->demodulator_priv;
|
|
u8 rec_buf[2];
|
|
u8 snd_buf[3];
|
|
|
|
/* SNR after Equalizer */
|
|
snd_buf[0] = 0x04;
|
|
snd_buf[1] = 0x00;
|
|
snd_buf[2] = 0x04;
|
|
|
|
if (i2c_writebytes(state,state->config->demod_address,snd_buf,3)) {
|
|
printk(KERN_WARNING "%s: error writing snr reg\n",
|
|
__func__);
|
|
return -1;
|
|
}
|
|
if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) {
|
|
printk(KERN_WARNING "%s: read_status read error\n",
|
|
__func__);
|
|
return -1;
|
|
}
|
|
|
|
state->snr = calculate_snr(rec_buf[0], 89599047);
|
|
*snr = (state->snr) >> 16;
|
|
|
|
dprintk("%s: noise = 0x%02x, snr = %d.%02d dB\n", __func__, rec_buf[0],
|
|
state->snr >> 24, (((state->snr>>8) & 0xffff) * 100) >> 16);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int or51211_read_signal_strength(struct dvb_frontend* fe, u16* strength)
|
|
{
|
|
/* Calculate Strength from SNR up to 35dB */
|
|
/* Even though the SNR can go higher than 35dB, there is some comfort */
|
|
/* factor in having a range of strong signals that can show at 100% */
|
|
struct or51211_state* state = (struct or51211_state*)fe->demodulator_priv;
|
|
u16 snr;
|
|
int ret;
|
|
|
|
ret = fe->ops.read_snr(fe, &snr);
|
|
if (ret != 0)
|
|
return ret;
|
|
/* Rather than use the 8.8 value snr, use state->snr which is 8.24 */
|
|
/* scale the range 0 - 35*2^24 into 0 - 65535 */
|
|
if (state->snr >= 8960 * 0x10000)
|
|
*strength = 0xffff;
|
|
else
|
|
*strength = state->snr / 8960;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int or51211_read_ber(struct dvb_frontend* fe, u32* ber)
|
|
{
|
|
*ber = -ENOSYS;
|
|
return 0;
|
|
}
|
|
|
|
static int or51211_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
|
|
{
|
|
*ucblocks = -ENOSYS;
|
|
return 0;
|
|
}
|
|
|
|
static int or51211_sleep(struct dvb_frontend* fe)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int or51211_init(struct dvb_frontend* fe)
|
|
{
|
|
struct or51211_state* state = fe->demodulator_priv;
|
|
const struct or51211_config* config = state->config;
|
|
const struct firmware* fw;
|
|
unsigned char get_ver_buf[] = {0x04,0x00,0x30,0x00,0x00};
|
|
unsigned char rec_buf[14];
|
|
int ret,i;
|
|
|
|
if (!state->initialized) {
|
|
/* Request the firmware, this will block until it uploads */
|
|
printk(KERN_INFO "or51211: Waiting for firmware upload "
|
|
"(%s)...\n", OR51211_DEFAULT_FIRMWARE);
|
|
ret = config->request_firmware(fe, &fw,
|
|
OR51211_DEFAULT_FIRMWARE);
|
|
printk(KERN_INFO "or51211:Got Hotplug firmware\n");
|
|
if (ret) {
|
|
printk(KERN_WARNING "or51211: No firmware uploaded "
|
|
"(timeout or file not found?)\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = or51211_load_firmware(fe, fw);
|
|
release_firmware(fw);
|
|
if (ret) {
|
|
printk(KERN_WARNING "or51211: Writing firmware to "
|
|
"device failed!\n");
|
|
return ret;
|
|
}
|
|
printk(KERN_INFO "or51211: Firmware upload complete.\n");
|
|
|
|
/* Set operation mode in Receiver 1 register;
|
|
* type 1:
|
|
* data 0x50h Automatic sets receiver channel conditions
|
|
* Automatic NTSC rejection filter
|
|
* Enable MPEG serial data output
|
|
* MPEG2tr
|
|
* High tuner phase noise
|
|
* normal +/-150kHz Carrier acquisition range
|
|
*/
|
|
if (i2c_writebytes(state,state->config->demod_address,
|
|
cmd_buf,3)) {
|
|
printk(KERN_WARNING "or51211: Load DVR Error 5\n");
|
|
return -1;
|
|
}
|
|
|
|
/* Read back ucode version to besure we loaded correctly */
|
|
/* and are really up and running */
|
|
rec_buf[0] = 0x04;
|
|
rec_buf[1] = 0x00;
|
|
rec_buf[2] = 0x03;
|
|
rec_buf[3] = 0x00;
|
|
msleep(30);
|
|
if (i2c_writebytes(state,state->config->demod_address,
|
|
rec_buf,3)) {
|
|
printk(KERN_WARNING "or51211: Load DVR Error A\n");
|
|
return -1;
|
|
}
|
|
msleep(3);
|
|
if (i2c_readbytes(state,state->config->demod_address,
|
|
&rec_buf[10],2)) {
|
|
printk(KERN_WARNING "or51211: Load DVR Error B\n");
|
|
return -1;
|
|
}
|
|
|
|
rec_buf[0] = 0x04;
|
|
rec_buf[1] = 0x00;
|
|
rec_buf[2] = 0x01;
|
|
rec_buf[3] = 0x00;
|
|
msleep(20);
|
|
if (i2c_writebytes(state,state->config->demod_address,
|
|
rec_buf,3)) {
|
|
printk(KERN_WARNING "or51211: Load DVR Error C\n");
|
|
return -1;
|
|
}
|
|
msleep(3);
|
|
if (i2c_readbytes(state,state->config->demod_address,
|
|
&rec_buf[12],2)) {
|
|
printk(KERN_WARNING "or51211: Load DVR Error D\n");
|
|
return -1;
|
|
}
|
|
|
|
for (i = 0; i < 8; i++)
|
|
rec_buf[i]=0xed;
|
|
|
|
for (i = 0; i < 5; i++) {
|
|
msleep(30);
|
|
get_ver_buf[4] = i+1;
|
|
if (i2c_writebytes(state,state->config->demod_address,
|
|
get_ver_buf,5)) {
|
|
printk(KERN_WARNING "or51211:Load DVR Error 6"
|
|
" - %d\n",i);
|
|
return -1;
|
|
}
|
|
msleep(3);
|
|
|
|
if (i2c_readbytes(state,state->config->demod_address,
|
|
&rec_buf[i*2],2)) {
|
|
printk(KERN_WARNING "or51211:Load DVR Error 7"
|
|
" - %d\n",i);
|
|
return -1;
|
|
}
|
|
/* If we didn't receive the right index, try again */
|
|
if ((int)rec_buf[i*2+1]!=i+1){
|
|
i--;
|
|
}
|
|
}
|
|
dprintk("read_fwbits %x %x %x %x %x %x %x %x %x %x\n",
|
|
rec_buf[0], rec_buf[1], rec_buf[2], rec_buf[3],
|
|
rec_buf[4], rec_buf[5], rec_buf[6], rec_buf[7],
|
|
rec_buf[8], rec_buf[9]);
|
|
|
|
printk(KERN_INFO "or51211: ver TU%02x%02x%02x VSB mode %02x"
|
|
" Status %02x\n",
|
|
rec_buf[2], rec_buf[4],rec_buf[6],
|
|
rec_buf[12],rec_buf[10]);
|
|
|
|
rec_buf[0] = 0x04;
|
|
rec_buf[1] = 0x00;
|
|
rec_buf[2] = 0x03;
|
|
rec_buf[3] = 0x00;
|
|
msleep(20);
|
|
if (i2c_writebytes(state,state->config->demod_address,
|
|
rec_buf,3)) {
|
|
printk(KERN_WARNING "or51211: Load DVR Error 8\n");
|
|
return -1;
|
|
}
|
|
msleep(20);
|
|
if (i2c_readbytes(state,state->config->demod_address,
|
|
&rec_buf[8],2)) {
|
|
printk(KERN_WARNING "or51211: Load DVR Error 9\n");
|
|
return -1;
|
|
}
|
|
state->initialized = 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int or51211_get_tune_settings(struct dvb_frontend* fe,
|
|
struct dvb_frontend_tune_settings* fesettings)
|
|
{
|
|
fesettings->min_delay_ms = 500;
|
|
fesettings->step_size = 0;
|
|
fesettings->max_drift = 0;
|
|
return 0;
|
|
}
|
|
|
|
static void or51211_release(struct dvb_frontend* fe)
|
|
{
|
|
struct or51211_state* state = fe->demodulator_priv;
|
|
state->config->sleep(fe);
|
|
kfree(state);
|
|
}
|
|
|
|
static struct dvb_frontend_ops or51211_ops;
|
|
|
|
struct dvb_frontend* or51211_attach(const struct or51211_config* config,
|
|
struct i2c_adapter* i2c)
|
|
{
|
|
struct or51211_state* state = NULL;
|
|
|
|
/* Allocate memory for the internal state */
|
|
state = kzalloc(sizeof(struct or51211_state), GFP_KERNEL);
|
|
if (state == NULL)
|
|
return NULL;
|
|
|
|
/* Setup the state */
|
|
state->config = config;
|
|
state->i2c = i2c;
|
|
state->initialized = 0;
|
|
state->current_frequency = 0;
|
|
|
|
/* Create dvb_frontend */
|
|
memcpy(&state->frontend.ops, &or51211_ops, sizeof(struct dvb_frontend_ops));
|
|
state->frontend.demodulator_priv = state;
|
|
return &state->frontend;
|
|
}
|
|
|
|
static struct dvb_frontend_ops or51211_ops = {
|
|
|
|
.info = {
|
|
.name = "Oren OR51211 VSB Frontend",
|
|
.type = FE_ATSC,
|
|
.frequency_min = 44000000,
|
|
.frequency_max = 958000000,
|
|
.frequency_stepsize = 166666,
|
|
.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
|
|
FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
|
|
FE_CAN_8VSB
|
|
},
|
|
|
|
.release = or51211_release,
|
|
|
|
.init = or51211_init,
|
|
.sleep = or51211_sleep,
|
|
|
|
.set_frontend = or51211_set_parameters,
|
|
.get_tune_settings = or51211_get_tune_settings,
|
|
|
|
.read_status = or51211_read_status,
|
|
.read_ber = or51211_read_ber,
|
|
.read_signal_strength = or51211_read_signal_strength,
|
|
.read_snr = or51211_read_snr,
|
|
.read_ucblocks = or51211_read_ucblocks,
|
|
};
|
|
|
|
module_param(debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
|
|
|
|
MODULE_DESCRIPTION("Oren OR51211 VSB [pcHDTV HD-2000] Demodulator Driver");
|
|
MODULE_AUTHOR("Kirk Lapray");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
EXPORT_SYMBOL(or51211_attach);
|
|
|