satip-axe/kernel/drivers/scsi/aic94xx/aic94xx_reg_def.h
2015-03-26 17:24:57 +01:00

2400 lines
72 KiB
C

/*
* Aic94xx SAS/SATA driver hardware registers defintions.
*
* Copyright (C) 2004 Adaptec, Inc. All rights reserved.
* Copyright (C) 2004 David Chaw <david_chaw@adaptec.com>
* Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
*
* Luben Tuikov: Some register value updates to make it work with the window
* agnostic register r/w functions. Some register corrections, sizes,
* etc.
*
* This file is licensed under GPLv2.
*
* This file is part of the aic94xx driver.
*
* The aic94xx driver is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; version 2 of the
* License.
*
* The aic94xx driver is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with the aic94xx driver; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* $Id: //depot/aic94xx/aic94xx_reg_def.h#27 $
*
*/
#ifndef _ADP94XX_REG_DEF_H_
#define _ADP94XX_REG_DEF_H_
/*
* Common definitions.
*/
#define CSEQ_MODE_PAGE_SIZE 0x200 /* CSEQ mode page size */
#define LmSEQ_MODE_PAGE_SIZE 0x200 /* LmSEQ mode page size */
#define LmSEQ_HOST_REG_SIZE 0x4000 /* LmSEQ Host Register size */
/********************* COM_SAS registers definition *************************/
/* The base is REG_BASE_ADDR, defined in aic94xx_reg.h.
*/
/*
* CHIM Registers, Address Range : (0x00-0xFF)
*/
#define COMBIST (REG_BASE_ADDR + 0x00)
/* bits 31:24 */
#define L7BLKRST 0x80000000
#define L6BLKRST 0x40000000
#define L5BLKRST 0x20000000
#define L4BLKRST 0x10000000
#define L3BLKRST 0x08000000
#define L2BLKRST 0x04000000
#define L1BLKRST 0x02000000
#define L0BLKRST 0x01000000
#define LmBLKRST 0xFF000000
#define LmBLKRST_COMBIST(phyid) (1 << (24 + phyid))
#define OCMBLKRST 0x00400000
#define CTXMEMBLKRST 0x00200000
#define CSEQBLKRST 0x00100000
#define EXSIBLKRST 0x00040000
#define DPIBLKRST 0x00020000
#define DFIFBLKRST 0x00010000
#define HARDRST 0x00000200
#define COMBLKRST 0x00000100
#define FRCDFPERR 0x00000080
#define FRCCIOPERR 0x00000020
#define FRCBISTERR 0x00000010
#define COMBISTEN 0x00000004
#define COMBISTDONE 0x00000002 /* ro */
#define COMBISTFAIL 0x00000001 /* ro */
#define COMSTAT (REG_BASE_ADDR + 0x04)
#define REQMBXREAD 0x00000040
#define RSPMBXAVAIL 0x00000020
#define CSBUFPERR 0x00000008
#define OVLYERR 0x00000004
#define CSERR 0x00000002
#define OVLYDMADONE 0x00000001
#define COMSTAT_MASK (REQMBXREAD | RSPMBXAVAIL | \
CSBUFPERR | OVLYERR | CSERR |\
OVLYDMADONE)
#define COMSTATEN (REG_BASE_ADDR + 0x08)
#define EN_REQMBXREAD 0x00000040
#define EN_RSPMBXAVAIL 0x00000020
#define EN_CSBUFPERR 0x00000008
#define EN_OVLYERR 0x00000004
#define EN_CSERR 0x00000002
#define EN_OVLYDONE 0x00000001
#define SCBPRO (REG_BASE_ADDR + 0x0C)
#define SCBCONS_MASK 0xFFFF0000
#define SCBPRO_MASK 0x0000FFFF
#define CHIMREQMBX (REG_BASE_ADDR + 0x10)
#define CHIMRSPMBX (REG_BASE_ADDR + 0x14)
#define CHIMINT (REG_BASE_ADDR + 0x18)
#define EXT_INT0 0x00000800
#define EXT_INT1 0x00000400
#define PORRSTDET 0x00000200
#define HARDRSTDET 0x00000100
#define DLAVAILQ 0x00000080 /* ro */
#define HOSTERR 0x00000040
#define INITERR 0x00000020
#define DEVINT 0x00000010
#define COMINT 0x00000008
#define DEVTIMER2 0x00000004
#define DEVTIMER1 0x00000002
#define DLAVAIL 0x00000001
#define CHIMINT_MASK (HOSTERR | INITERR | DEVINT | COMINT |\
DEVTIMER2 | DEVTIMER1 | DLAVAIL)
#define DEVEXCEPT_MASK (HOSTERR | INITERR | DEVINT | COMINT)
#define CHIMINTEN (REG_BASE_ADDR + 0x1C)
#define RST_EN_EXT_INT1 0x01000000
#define RST_EN_EXT_INT0 0x00800000
#define RST_EN_HOSTERR 0x00400000
#define RST_EN_INITERR 0x00200000
#define RST_EN_DEVINT 0x00100000
#define RST_EN_COMINT 0x00080000
#define RST_EN_DEVTIMER2 0x00040000
#define RST_EN_DEVTIMER1 0x00020000
#define RST_EN_DLAVAIL 0x00010000
#define SET_EN_EXT_INT1 0x00000100
#define SET_EN_EXT_INT0 0x00000080
#define SET_EN_HOSTERR 0x00000040
#define SET_EN_INITERR 0x00000020
#define SET_EN_DEVINT 0x00000010
#define SET_EN_COMINT 0x00000008
#define SET_EN_DEVTIMER2 0x00000004
#define SET_EN_DEVTIMER1 0x00000002
#define SET_EN_DLAVAIL 0x00000001
#define RST_CHIMINTEN (RST_EN_HOSTERR | RST_EN_INITERR | \
RST_EN_DEVINT | RST_EN_COMINT | \
RST_EN_DEVTIMER2 | RST_EN_DEVTIMER1 |\
RST_EN_DLAVAIL)
#define SET_CHIMINTEN (SET_EN_HOSTERR | SET_EN_INITERR |\
SET_EN_DEVINT | SET_EN_COMINT |\
SET_EN_DLAVAIL)
#define OVLYDMACTL (REG_BASE_ADDR + 0x20)
#define OVLYADR_MASK 0x07FF0000
#define OVLYLSEQ_MASK 0x0000FF00
#define OVLYCSEQ 0x00000080
#define OVLYHALTERR 0x00000040
#define PIOCMODE 0x00000020
#define RESETOVLYDMA 0x00000008 /* wo */
#define STARTOVLYDMA 0x00000004
#define STOPOVLYDMA 0x00000002 /* wo */
#define OVLYDMAACT 0x00000001 /* ro */
#define OVLYDMACNT (REG_BASE_ADDR + 0x24)
#define OVLYDOMAIN1 0x20000000 /* ro */
#define OVLYDOMAIN0 0x10000000
#define OVLYBUFADR_MASK 0x007F0000
#define OVLYDMACNT_MASK 0x00003FFF
#define OVLYDMAADR (REG_BASE_ADDR + 0x28)
#define DMAERR (REG_BASE_ADDR + 0x30)
#define OVLYERRSTAT_MASK 0x0000FF00 /* ro */
#define CSERRSTAT_MASK 0x000000FF /* ro */
#define SPIODATA (REG_BASE_ADDR + 0x34)
/* 0x38 - 0x3C are reserved */
#define T1CNTRLR (REG_BASE_ADDR + 0x40)
#define T1DONE 0x00010000 /* ro */
#define TIMER64 0x00000400
#define T1ENABLE 0x00000200
#define T1RELOAD 0x00000100
#define T1PRESCALER_MASK 0x00000003
#define T1CMPR (REG_BASE_ADDR + 0x44)
#define T1CNTR (REG_BASE_ADDR + 0x48)
#define T2CNTRLR (REG_BASE_ADDR + 0x4C)
#define T2DONE 0x00010000 /* ro */
#define T2ENABLE 0x00000200
#define T2RELOAD 0x00000100
#define T2PRESCALER_MASK 0x00000003
#define T2CMPR (REG_BASE_ADDR + 0x50)
#define T2CNTR (REG_BASE_ADDR + 0x54)
/* 0x58h - 0xFCh are reserved */
/*
* DCH_SAS Registers, Address Range : (0x800-0xFFF)
*/
#define CMDCTXBASE (REG_BASE_ADDR + 0x800)
#define DEVCTXBASE (REG_BASE_ADDR + 0x808)
#define CTXDOMAIN (REG_BASE_ADDR + 0x810)
#define DEVCTXDOMAIN1 0x00000008 /* ro */
#define DEVCTXDOMAIN0 0x00000004
#define CMDCTXDOMAIN1 0x00000002 /* ro */
#define CMDCTXDOMAIN0 0x00000001
#define DCHCTL (REG_BASE_ADDR + 0x814)
#define OCMBISTREPAIR 0x00080000
#define OCMBISTEN 0x00040000
#define OCMBISTDN 0x00020000 /* ro */
#define OCMBISTFAIL 0x00010000 /* ro */
#define DDBBISTEN 0x00004000
#define DDBBISTDN 0x00002000 /* ro */
#define DDBBISTFAIL 0x00001000 /* ro */
#define SCBBISTEN 0x00000400
#define SCBBISTDN 0x00000200 /* ro */
#define SCBBISTFAIL 0x00000100 /* ro */
#define MEMSEL_MASK 0x000000E0
#define MEMSEL_CCM_LSEQ 0x00000000
#define MEMSEL_CCM_IOP 0x00000020
#define MEMSEL_CCM_SASCTL 0x00000040
#define MEMSEL_DCM_LSEQ 0x00000060
#define MEMSEL_DCM_IOP 0x00000080
#define MEMSEL_OCM 0x000000A0
#define FRCERR 0x00000010
#define AUTORLS 0x00000001
#define DCHREVISION (REG_BASE_ADDR + 0x818)
#define DCHREVISION_MASK 0x000000FF
#define DCHSTATUS (REG_BASE_ADDR + 0x81C)
#define EN_CFIFTOERR 0x00020000
#define CFIFTOERR 0x00000200
#define CSEQINT 0x00000100 /* ro */
#define LSEQ7INT 0x00000080 /* ro */
#define LSEQ6INT 0x00000040 /* ro */
#define LSEQ5INT 0x00000020 /* ro */
#define LSEQ4INT 0x00000010 /* ro */
#define LSEQ3INT 0x00000008 /* ro */
#define LSEQ2INT 0x00000004 /* ro */
#define LSEQ1INT 0x00000002 /* ro */
#define LSEQ0INT 0x00000001 /* ro */
#define LSEQINT_MASK (LSEQ7INT | LSEQ6INT | LSEQ5INT |\
LSEQ4INT | LSEQ3INT | LSEQ2INT |\
LSEQ1INT | LSEQ0INT)
#define DCHDFIFDEBUG (REG_BASE_ADDR + 0x820)
#define ENFAIRMST 0x00FF0000
#define DISWRMST9 0x00000200
#define DISWRMST8 0x00000100
#define DISRDMST 0x000000FF
#define ATOMICSTATCTL (REG_BASE_ADDR + 0x824)
/* 8 bit wide */
#define AUTOINC 0x80
#define ATOMICERR 0x04
#define ATOMICWIN 0x02
#define ATOMICDONE 0x01
#define ALTCIOADR (REG_BASE_ADDR + 0x828)
/* 16 bit; bits 8:0 define CIO addr space of CSEQ */
#define ASCBPTR (REG_BASE_ADDR + 0x82C)
/* 16 bit wide */
#define ADDBPTR (REG_BASE_ADDR + 0x82E)
/* 16 bit wide */
#define ANEWDATA (REG_BASE_ADDR + 0x830)
/* 16 bit */
#define AOLDDATA (REG_BASE_ADDR + 0x834)
/* 16 bit */
#define CTXACCESS (REG_BASE_ADDR + 0x838)
/* 32 bit */
/* 0x83Ch - 0xFFCh are reserved */
/*
* ARP2 External Processor Registers, Address Range : (0x00-0x1F)
*/
#define ARP2CTL 0x00
#define FRCSCRPERR 0x00040000
#define FRCARP2PERR 0x00020000
#define FRCARP2ILLOPC 0x00010000
#define ENWAITTO 0x00008000
#define PERRORDIS 0x00004000
#define FAILDIS 0x00002000
#define CIOPERRDIS 0x00001000
#define BREAKEN3 0x00000800
#define BREAKEN2 0x00000400
#define BREAKEN1 0x00000200
#define BREAKEN0 0x00000100
#define EPAUSE 0x00000008
#define PAUSED 0x00000004 /* ro */
#define STEP 0x00000002
#define ARP2RESET 0x00000001 /* wo */
#define ARP2INT 0x04
#define HALTCODE_MASK 0x00FF0000 /* ro */
#define ARP2WAITTO 0x00000100
#define ARP2HALTC 0x00000080
#define ARP2ILLOPC 0x00000040
#define ARP2PERR 0x00000020
#define ARP2CIOPERR 0x00000010
#define ARP2BREAK3 0x00000008
#define ARP2BREAK2 0x00000004
#define ARP2BREAK1 0x00000002
#define ARP2BREAK0 0x00000001
#define ARP2INTEN 0x08
#define EN_ARP2WAITTO 0x00000100
#define EN_ARP2HALTC 0x00000080
#define EN_ARP2ILLOPC 0x00000040
#define EN_ARP2PERR 0x00000020
#define EN_ARP2CIOPERR 0x00000010
#define EN_ARP2BREAK3 0x00000008
#define EN_ARP2BREAK2 0x00000004
#define EN_ARP2BREAK1 0x00000002
#define EN_ARP2BREAK0 0x00000001
#define ARP2BREAKADR01 0x0C
#define BREAKADR1_MASK 0x0FFF0000
#define BREAKADR0_MASK 0x00000FFF
#define ARP2BREAKADR23 0x10
#define BREAKADR3_MASK 0x0FFF0000
#define BREAKADR2_MASK 0x00000FFF
/* 0x14h - 0x1Ch are reserved */
/*
* ARP2 Registers, Address Range : (0x00-0x1F)
* The definitions have the same address offset for CSEQ and LmSEQ
* CIO Bus Registers.
*/
#define MODEPTR 0x00
#define DSTMODE 0xF0
#define SRCMODE 0x0F
#define ALTMODE 0x01
#define ALTDMODE 0xF0
#define ALTSMODE 0x0F
#define ATOMICXCHG 0x02
#define FLAG 0x04
#define INTCODE_MASK 0xF0
#define ALTMODEV2 0x04
#define CARRY_INT 0x02
#define CARRY 0x01
#define ARP2INTCTL 0x05
#define PAUSEDIS 0x80
#define RSTINTCTL 0x40
#define POPALTMODE 0x08
#define ALTMODEV 0x04
#define INTMASK 0x02
#define IRET 0x01
#define STACK 0x06
#define FUNCTION1 0x07
#define PRGMCNT 0x08
#define ACCUM 0x0A
#define SINDEX 0x0C
#define DINDEX 0x0E
#define ALLONES 0x10
#define ALLZEROS 0x11
#define SINDIR 0x12
#define DINDIR 0x13
#define JUMLDIR 0x14
#define ARP2HALTCODE 0x15
#define CURRADDR 0x16
#define LASTADDR 0x18
#define NXTLADDR 0x1A
#define DBGPORTPTR 0x1C
#define DBGPORT 0x1D
/*
* CIO Registers.
* The definitions have the same address offset for CSEQ and LmSEQ
* CIO Bus Registers.
*/
#define MnSCBPTR 0x20
#define MnDDBPTR 0x22
#define SCRATCHPAGE 0x24
#define MnSCRATCHPAGE 0x25
#define SCRATCHPAGESV 0x26
#define MnSCRATCHPAGESV 0x27
#define MnDMAERRS 0x46
#define MnSGDMAERRS 0x47
#define MnSGBUF 0x53
#define MnSGDMASTAT 0x5b
#define MnDDMACTL 0x5c /* RAZOR.rspec.fm rev 1.5 is wrong */
#define MnDDMASTAT 0x5d /* RAZOR.rspec.fm rev 1.5 is wrong */
#define MnDDMAMODE 0x5e /* RAZOR.rspec.fm rev 1.5 is wrong */
#define MnDMAENG 0x60
#define MnPIPECTL 0x61
#define MnSGBADR 0x65
#define MnSCB_SITE 0x100
#define MnDDB_SITE 0x180
/*
* The common definitions below have the same address offset for both
* CSEQ and LmSEQ.
*/
#define BISTCTL0 0x4C
#define BISTCTL1 0x50
#define MAPPEDSCR 0x800
/*
* CSEQ Host Register, Address Range : (0x000-0xFFC)
*/
#define CSEQ_HOST_REG_BASE_ADR 0xB8001000
#define CARP2CTL (CSEQ_HOST_REG_BASE_ADR + ARP2CTL)
#define CARP2INT (CSEQ_HOST_REG_BASE_ADR + ARP2INT)
#define CARP2INTEN (CSEQ_HOST_REG_BASE_ADR + ARP2INTEN)
#define CARP2BREAKADR01 (CSEQ_HOST_REG_BASE_ADR+ARP2BREAKADR01)
#define CARP2BREAKADR23 (CSEQ_HOST_REG_BASE_ADR+ARP2BREAKADR23)
#define CBISTCTL (CSEQ_HOST_REG_BASE_ADR + BISTCTL1)
#define CSEQRAMBISTEN 0x00000040
#define CSEQRAMBISTDN 0x00000020 /* ro */
#define CSEQRAMBISTFAIL 0x00000010 /* ro */
#define CSEQSCRBISTEN 0x00000004
#define CSEQSCRBISTDN 0x00000002 /* ro */
#define CSEQSCRBISTFAIL 0x00000001 /* ro */
#define CMAPPEDSCR (CSEQ_HOST_REG_BASE_ADR + MAPPEDSCR)
/*
* CSEQ CIO Bus Registers, Address Range : (0x0000-0x1FFC)
* 16 modes, each mode is 512 bytes.
* Unless specified, the register should valid for all modes.
*/
#define CSEQ_CIO_REG_BASE_ADR REG_BASE_ADDR_CSEQCIO
#define CSEQm_CIO_REG(Mode, Reg) \
(CSEQ_CIO_REG_BASE_ADR + \
((u32) (Mode) * CSEQ_MODE_PAGE_SIZE) + (u32) (Reg))
#define CMODEPTR (CSEQ_CIO_REG_BASE_ADR + MODEPTR)
#define CALTMODE (CSEQ_CIO_REG_BASE_ADR + ALTMODE)
#define CATOMICXCHG (CSEQ_CIO_REG_BASE_ADR + ATOMICXCHG)
#define CFLAG (CSEQ_CIO_REG_BASE_ADR + FLAG)
#define CARP2INTCTL (CSEQ_CIO_REG_BASE_ADR + ARP2INTCTL)
#define CSTACK (CSEQ_CIO_REG_BASE_ADR + STACK)
#define CFUNCTION1 (CSEQ_CIO_REG_BASE_ADR + FUNCTION1)
#define CPRGMCNT (CSEQ_CIO_REG_BASE_ADR + PRGMCNT)
#define CACCUM (CSEQ_CIO_REG_BASE_ADR + ACCUM)
#define CSINDEX (CSEQ_CIO_REG_BASE_ADR + SINDEX)
#define CDINDEX (CSEQ_CIO_REG_BASE_ADR + DINDEX)
#define CALLONES (CSEQ_CIO_REG_BASE_ADR + ALLONES)
#define CALLZEROS (CSEQ_CIO_REG_BASE_ADR + ALLZEROS)
#define CSINDIR (CSEQ_CIO_REG_BASE_ADR + SINDIR)
#define CDINDIR (CSEQ_CIO_REG_BASE_ADR + DINDIR)
#define CJUMLDIR (CSEQ_CIO_REG_BASE_ADR + JUMLDIR)
#define CARP2HALTCODE (CSEQ_CIO_REG_BASE_ADR + ARP2HALTCODE)
#define CCURRADDR (CSEQ_CIO_REG_BASE_ADR + CURRADDR)
#define CLASTADDR (CSEQ_CIO_REG_BASE_ADR + LASTADDR)
#define CNXTLADDR (CSEQ_CIO_REG_BASE_ADR + NXTLADDR)
#define CDBGPORTPTR (CSEQ_CIO_REG_BASE_ADR + DBGPORTPTR)
#define CDBGPORT (CSEQ_CIO_REG_BASE_ADR + DBGPORT)
#define CSCRATCHPAGE (CSEQ_CIO_REG_BASE_ADR + SCRATCHPAGE)
#define CMnSCBPTR(Mode) CSEQm_CIO_REG(Mode, MnSCBPTR)
#define CMnDDBPTR(Mode) CSEQm_CIO_REG(Mode, MnDDBPTR)
#define CMnSCRATCHPAGE(Mode) CSEQm_CIO_REG(Mode, MnSCRATCHPAGE)
#define CLINKCON (CSEQ_CIO_REG_BASE_ADR + 0x28)
#define CCIOAACESS (CSEQ_CIO_REG_BASE_ADR + 0x2C)
/* mode 0-7 */
#define MnREQMBX 0x30
#define CMnREQMBX(Mode) CSEQm_CIO_REG(Mode, 0x30)
/* mode 8 */
#define CSEQCON CSEQm_CIO_REG(8, 0x30)
/* mode 0-7 */
#define MnRSPMBX 0x34
#define CMnRSPMBX(Mode) CSEQm_CIO_REG(Mode, 0x34)
/* mode 8 */
#define CSEQCOMCTL CSEQm_CIO_REG(8, 0x34)
/* mode 8 */
#define CSEQCOMSTAT CSEQm_CIO_REG(8, 0x35)
/* mode 8 */
#define CSEQCOMINTEN CSEQm_CIO_REG(8, 0x36)
/* mode 8 */
#define CSEQCOMDMACTL CSEQm_CIO_REG(8, 0x37)
#define CSHALTERR 0x10
#define RESETCSDMA 0x08 /* wo */
#define STARTCSDMA 0x04
#define STOPCSDMA 0x02 /* wo */
#define CSDMAACT 0x01 /* ro */
/* mode 0-7 */
#define MnINT 0x38
#define CMnINT(Mode) CSEQm_CIO_REG(Mode, 0x38)
#define CMnREQMBXE 0x02
#define CMnRSPMBXF 0x01
#define CMnINT_MASK 0x00000003
/* mode 8 */
#define CSEQREQMBX CSEQm_CIO_REG(8, 0x38)
/* mode 0-7 */
#define MnINTEN 0x3C
#define CMnINTEN(Mode) CSEQm_CIO_REG(Mode, 0x3C)
#define EN_CMnRSPMBXF 0x01
/* mode 8 */
#define CSEQRSPMBX CSEQm_CIO_REG(8, 0x3C)
/* mode 8 */
#define CSDMAADR CSEQm_CIO_REG(8, 0x40)
/* mode 8 */
#define CSDMACNT CSEQm_CIO_REG(8, 0x48)
/* mode 8 */
#define CSEQDLCTL CSEQm_CIO_REG(8, 0x4D)
#define DONELISTEND 0x10
#define DONELISTSIZE_MASK 0x0F
#define DONELISTSIZE_8ELEM 0x01
#define DONELISTSIZE_16ELEM 0x02
#define DONELISTSIZE_32ELEM 0x03
#define DONELISTSIZE_64ELEM 0x04
#define DONELISTSIZE_128ELEM 0x05
#define DONELISTSIZE_256ELEM 0x06
#define DONELISTSIZE_512ELEM 0x07
#define DONELISTSIZE_1024ELEM 0x08
#define DONELISTSIZE_2048ELEM 0x09
#define DONELISTSIZE_4096ELEM 0x0A
#define DONELISTSIZE_8192ELEM 0x0B
#define DONELISTSIZE_16384ELEM 0x0C
/* mode 8 */
#define CSEQDLOFFS CSEQm_CIO_REG(8, 0x4E)
/* mode 11 */
#define CM11INTVEC0 CSEQm_CIO_REG(11, 0x50)
/* mode 11 */
#define CM11INTVEC1 CSEQm_CIO_REG(11, 0x52)
/* mode 11 */
#define CM11INTVEC2 CSEQm_CIO_REG(11, 0x54)
#define CCONMSK (CSEQ_CIO_REG_BASE_ADR + 0x60)
#define CCONEXIST (CSEQ_CIO_REG_BASE_ADR + 0x61)
#define CCONMODE (CSEQ_CIO_REG_BASE_ADR + 0x62)
#define CTIMERCALC (CSEQ_CIO_REG_BASE_ADR + 0x64)
#define CINTDIS (CSEQ_CIO_REG_BASE_ADR + 0x68)
/* mode 8, 32x32 bits, 128 bytes of mapped buffer */
#define CSBUFFER CSEQm_CIO_REG(8, 0x80)
#define CSCRATCH (CSEQ_CIO_REG_BASE_ADR + 0x1C0)
/* mode 0-8 */
#define CMnSCRATCH(Mode) CSEQm_CIO_REG(Mode, 0x1E0)
/*
* CSEQ Mapped Instruction RAM Page, Address Range : (0x0000-0x1FFC)
*/
#define CSEQ_RAM_REG_BASE_ADR 0xB8004000
/*
* The common definitions below have the same address offset for all the Link
* sequencers.
*/
#define MODECTL 0x40
#define DBGMODE 0x44
#define CONTROL 0x48
#define LEDTIMER 0x00010000
#define LEDTIMERS_10us 0x00000000
#define LEDTIMERS_1ms 0x00000800
#define LEDTIMERS_100ms 0x00001000
#define LEDMODE_TXRX 0x00000000
#define LEDMODE_CONNECTED 0x00000200
#define LEDPOL 0x00000100
#define LSEQRAM 0x1000
/*
* LmSEQ Host Registers, Address Range : (0x0000-0x3FFC)
*/
#define LSEQ0_HOST_REG_BASE_ADR 0xB8020000
#define LSEQ1_HOST_REG_BASE_ADR 0xB8024000
#define LSEQ2_HOST_REG_BASE_ADR 0xB8028000
#define LSEQ3_HOST_REG_BASE_ADR 0xB802C000
#define LSEQ4_HOST_REG_BASE_ADR 0xB8030000
#define LSEQ5_HOST_REG_BASE_ADR 0xB8034000
#define LSEQ6_HOST_REG_BASE_ADR 0xB8038000
#define LSEQ7_HOST_REG_BASE_ADR 0xB803C000
#define LmARP2CTL(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
ARP2CTL)
#define LmARP2INT(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
ARP2INT)
#define LmARP2INTEN(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
ARP2INTEN)
#define LmDBGMODE(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
DBGMODE)
#define LmCONTROL(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
CONTROL)
#define LmARP2BREAKADR01(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
ARP2BREAKADR01)
#define LmARP2BREAKADR23(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
ARP2BREAKADR23)
#define LmMODECTL(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
MODECTL)
#define LmAUTODISCI 0x08000000
#define LmDSBLBITLT 0x04000000
#define LmDSBLANTT 0x02000000
#define LmDSBLCRTT 0x01000000
#define LmDSBLCONT 0x00000100
#define LmPRIMODE 0x00000080
#define LmDSBLHOLD 0x00000040
#define LmDISACK 0x00000020
#define LmBLIND48 0x00000010
#define LmRCVMODE_MASK 0x0000000C
#define LmRCVMODE_PLD 0x00000000
#define LmRCVMODE_HPC 0x00000004
#define LmDBGMODE(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
DBGMODE)
#define LmFRCPERR 0x80000000
#define LmMEMSEL_MASK 0x30000000
#define LmFRCRBPERR 0x00000000
#define LmFRCTBPERR 0x10000000
#define LmFRCSGBPERR 0x20000000
#define LmFRCARBPERR 0x30000000
#define LmRCVIDW 0x00080000
#define LmINVDWERR 0x00040000
#define LmRCVDISP 0x00004000
#define LmDISPERR 0x00002000
#define LmDSBLDSCR 0x00000800
#define LmDSBLSCR 0x00000400
#define LmFRCNAK 0x00000200
#define LmFRCROFS 0x00000100
#define LmFRCCRC 0x00000080
#define LmFRMTYPE_MASK 0x00000070
#define LmSG_DATA 0x00000000
#define LmSG_COMMAND 0x00000010
#define LmSG_TASK 0x00000020
#define LmSG_TGTXFER 0x00000030
#define LmSG_RESPONSE 0x00000040
#define LmSG_IDENADDR 0x00000050
#define LmSG_OPENADDR 0x00000060
#define LmDISCRCGEN 0x00000008
#define LmDISCRCCHK 0x00000004
#define LmSSXMTFRM 0x00000002
#define LmSSRCVFRM 0x00000001
#define LmCONTROL(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
CONTROL)
#define LmSTEPXMTFRM 0x00000002
#define LmSTEPRCVFRM 0x00000001
#define LmBISTCTL0(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
((LinkNum)*LmSEQ_HOST_REG_SIZE) + \
BISTCTL0)
#define ARBBISTEN 0x40000000
#define ARBBISTDN 0x20000000 /* ro */
#define ARBBISTFAIL 0x10000000 /* ro */
#define TBBISTEN 0x00000400
#define TBBISTDN 0x00000200 /* ro */
#define TBBISTFAIL 0x00000100 /* ro */
#define RBBISTEN 0x00000040
#define RBBISTDN 0x00000020 /* ro */
#define RBBISTFAIL 0x00000010 /* ro */
#define SGBISTEN 0x00000004
#define SGBISTDN 0x00000002 /* ro */
#define SGBISTFAIL 0x00000001 /* ro */
#define LmBISTCTL1(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
((LinkNum)*LmSEQ_HOST_REG_SIZE) +\
BISTCTL1)
#define LmRAMPAGE1 0x00000200
#define LmRAMPAGE0 0x00000100
#define LmIMEMBISTEN 0x00000040
#define LmIMEMBISTDN 0x00000020 /* ro */
#define LmIMEMBISTFAIL 0x00000010 /* ro */
#define LmSCRBISTEN 0x00000004
#define LmSCRBISTDN 0x00000002 /* ro */
#define LmSCRBISTFAIL 0x00000001 /* ro */
#define LmRAMPAGE (LmRAMPAGE1 + LmRAMPAGE0)
#define LmRAMPAGE_LSHIFT 0x8
#define LmSCRATCH(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
((LinkNum) * LmSEQ_HOST_REG_SIZE) +\
MAPPEDSCR)
#define LmSEQRAM(LinkNum) (LSEQ0_HOST_REG_BASE_ADR + \
((LinkNum) * LmSEQ_HOST_REG_SIZE) +\
LSEQRAM)
/*
* LmSEQ CIO Bus Register, Address Range : (0x0000-0xFFC)
* 8 modes, each mode is 512 bytes.
* Unless specified, the register should valid for all modes.
*/
#define LmSEQ_CIOBUS_REG_BASE 0x2000
#define LmSEQ_PHY_BASE(Mode, LinkNum) \
(LSEQ0_HOST_REG_BASE_ADR + \
(LmSEQ_HOST_REG_SIZE * (u32) (LinkNum)) + \
LmSEQ_CIOBUS_REG_BASE + \
((u32) (Mode) * LmSEQ_MODE_PAGE_SIZE))
#define LmSEQ_PHY_REG(Mode, LinkNum, Reg) \
(LmSEQ_PHY_BASE(Mode, LinkNum) + (u32) (Reg))
#define LmMODEPTR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, MODEPTR)
#define LmALTMODE(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ALTMODE)
#define LmATOMICXCHG(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ATOMICXCHG)
#define LmFLAG(LinkNum) LmSEQ_PHY_REG(0, LinkNum, FLAG)
#define LmARP2INTCTL(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ARP2INTCTL)
#define LmSTACK(LinkNum) LmSEQ_PHY_REG(0, LinkNum, STACK)
#define LmFUNCTION1(LinkNum) LmSEQ_PHY_REG(0, LinkNum, FUNCTION1)
#define LmPRGMCNT(LinkNum) LmSEQ_PHY_REG(0, LinkNum, PRGMCNT)
#define LmACCUM(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ACCUM)
#define LmSINDEX(LinkNum) LmSEQ_PHY_REG(0, LinkNum, SINDEX)
#define LmDINDEX(LinkNum) LmSEQ_PHY_REG(0, LinkNum, DINDEX)
#define LmALLONES(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ALLONES)
#define LmALLZEROS(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ALLZEROS)
#define LmSINDIR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, SINDIR)
#define LmDINDIR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, DINDIR)
#define LmJUMLDIR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, JUMLDIR)
#define LmARP2HALTCODE(LinkNum) LmSEQ_PHY_REG(0, LinkNum, ARP2HALTCODE)
#define LmCURRADDR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, CURRADDR)
#define LmLASTADDR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, LASTADDR)
#define LmNXTLADDR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, NXTLADDR)
#define LmDBGPORTPTR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, DBGPORTPTR)
#define LmDBGPORT(LinkNum) LmSEQ_PHY_REG(0, LinkNum, DBGPORT)
#define LmSCRATCHPAGE(LinkNum) LmSEQ_PHY_REG(0, LinkNum, SCRATCHPAGE)
#define LmMnSCRATCHPAGE(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, \
MnSCRATCHPAGE)
#define LmTIMERCALC(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x28)
#define LmREQMBX(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x30)
#define LmRSPMBX(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x34)
#define LmMnINT(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x38)
#define CTXMEMSIZE 0x80000000 /* ro */
#define LmACKREQ 0x08000000
#define LmNAKREQ 0x04000000
#define LmMnXMTERR 0x02000000
#define LmM5OOBSVC 0x01000000
#define LmHWTINT 0x00800000
#define LmMnCTXDONE 0x00100000
#define LmM2REQMBXF 0x00080000
#define LmM2RSPMBXE 0x00040000
#define LmMnDMAERR 0x00020000
#define LmRCVPRIM 0x00010000
#define LmRCVERR 0x00008000
#define LmADDRRCV 0x00004000
#define LmMnHDRMISS 0x00002000
#define LmMnWAITSCB 0x00001000
#define LmMnRLSSCB 0x00000800
#define LmMnSAVECTX 0x00000400
#define LmMnFETCHSG 0x00000200
#define LmMnLOADCTX 0x00000100
#define LmMnCFGICL 0x00000080
#define LmMnCFGSATA 0x00000040
#define LmMnCFGEXPSATA 0x00000020
#define LmMnCFGCMPLT 0x00000010
#define LmMnCFGRBUF 0x00000008
#define LmMnSAVETTR 0x00000004
#define LmMnCFGRDAT 0x00000002
#define LmMnCFGHDR 0x00000001
#define LmMnINTEN(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x3C)
#define EN_LmACKREQ 0x08000000
#define EN_LmNAKREQ 0x04000000
#define EN_LmMnXMTERR 0x02000000
#define EN_LmM5OOBSVC 0x01000000
#define EN_LmHWTINT 0x00800000
#define EN_LmMnCTXDONE 0x00100000
#define EN_LmM2REQMBXF 0x00080000
#define EN_LmM2RSPMBXE 0x00040000
#define EN_LmMnDMAERR 0x00020000
#define EN_LmRCVPRIM 0x00010000
#define EN_LmRCVERR 0x00008000
#define EN_LmADDRRCV 0x00004000
#define EN_LmMnHDRMISS 0x00002000
#define EN_LmMnWAITSCB 0x00001000
#define EN_LmMnRLSSCB 0x00000800
#define EN_LmMnSAVECTX 0x00000400
#define EN_LmMnFETCHSG 0x00000200
#define EN_LmMnLOADCTX 0x00000100
#define EN_LmMnCFGICL 0x00000080
#define EN_LmMnCFGSATA 0x00000040
#define EN_LmMnCFGEXPSATA 0x00000020
#define EN_LmMnCFGCMPLT 0x00000010
#define EN_LmMnCFGRBUF 0x00000008
#define EN_LmMnSAVETTR 0x00000004
#define EN_LmMnCFGRDAT 0x00000002
#define EN_LmMnCFGHDR 0x00000001
#define LmM0INTEN_MASK (EN_LmMnCFGCMPLT | EN_LmMnCFGRBUF | \
EN_LmMnSAVETTR | EN_LmMnCFGRDAT | \
EN_LmMnCFGHDR | EN_LmRCVERR | \
EN_LmADDRRCV | EN_LmMnHDRMISS | \
EN_LmMnRLSSCB | EN_LmMnSAVECTX | \
EN_LmMnFETCHSG | EN_LmMnLOADCTX | \
EN_LmHWTINT | EN_LmMnCTXDONE | \
EN_LmRCVPRIM | EN_LmMnCFGSATA | \
EN_LmMnCFGEXPSATA | EN_LmMnDMAERR)
#define LmM1INTEN_MASK (EN_LmMnCFGCMPLT | EN_LmADDRRCV | \
EN_LmMnRLSSCB | EN_LmMnSAVECTX | \
EN_LmMnFETCHSG | EN_LmMnLOADCTX | \
EN_LmMnXMTERR | EN_LmHWTINT | \
EN_LmMnCTXDONE | EN_LmRCVPRIM | \
EN_LmRCVERR | EN_LmMnDMAERR)
#define LmM2INTEN_MASK (EN_LmADDRRCV | EN_LmHWTINT | \
EN_LmM2REQMBXF | EN_LmRCVPRIM | \
EN_LmRCVERR)
#define LmM5INTEN_MASK (EN_LmADDRRCV | EN_LmM5OOBSVC | \
EN_LmHWTINT | EN_LmRCVPRIM | \
EN_LmRCVERR)
#define LmXMTPRIMD(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x40)
#define LmXMTPRIMCS(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x44)
#define LmCONSTAT(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x45)
#define LmMnDMAERRS(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x46)
#define LmMnSGDMAERRS(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x47)
#define LmM0EXPHDRP(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x48)
#define LmM1SASALIGN(LinkNum) LmSEQ_PHY_REG(1, LinkNum, 0x48)
#define SAS_ALIGN_DEFAULT 0xFF
#define LmM0MSKHDRP(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x49)
#define LmM1STPALIGN(LinkNum) LmSEQ_PHY_REG(1, LinkNum, 0x49)
#define STP_ALIGN_DEFAULT 0x1F
#define LmM0RCVHDRP(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x4A)
#define LmM1XMTHDRP(LinkNum) LmSEQ_PHY_REG(1, LinkNum, 0x4A)
#define LmM0ICLADR(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x4B)
#define LmM1ALIGNMODE(LinkNum) LmSEQ_PHY_REG(1, LinkNum, 0x4B)
#define LmDISALIGN 0x20
#define LmROTSTPALIGN 0x10
#define LmSTPALIGN 0x08
#define LmROTNOTIFY 0x04
#define LmDUALALIGN 0x02
#define LmROTALIGN 0x01
#define LmM0EXPRCVNT(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x4C)
#define LmM1XMTCNT(LinkNum) LmSEQ_PHY_REG(1, LinkNum, 0x4C)
#define LmMnBUFSTAT(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x4E)
#define LmMnBUFPERR 0x01
/* mode 0-1 */
#define LmMnXFRLVL(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x59)
#define LmMnXFRLVL_128 0x05
#define LmMnXFRLVL_256 0x04
#define LmMnXFRLVL_512 0x03
#define LmMnXFRLVL_1024 0x02
#define LmMnXFRLVL_1536 0x01
#define LmMnXFRLVL_2048 0x00
/* mode 0-1 */
#define LmMnSGDMACTL(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x5A)
#define LmMnRESETSG 0x04
#define LmMnSTOPSG 0x02
#define LmMnSTARTSG 0x01
/* mode 0-1 */
#define LmMnSGDMASTAT(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x5B)
/* mode 0-1 */
#define LmMnDDMACTL(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x5C)
#define LmMnFLUSH 0x40 /* wo */
#define LmMnRLSRTRY 0x20 /* wo */
#define LmMnDISCARD 0x10 /* wo */
#define LmMnRESETDAT 0x08 /* wo */
#define LmMnSUSDAT 0x04 /* wo */
#define LmMnSTOPDAT 0x02 /* wo */
#define LmMnSTARTDAT 0x01 /* wo */
/* mode 0-1 */
#define LmMnDDMASTAT(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x5D)
#define LmMnDPEMPTY 0x80
#define LmMnFLUSHING 0x40
#define LmMnDDMAREQ 0x20
#define LmMnHDMAREQ 0x10
#define LmMnDATFREE 0x08
#define LmMnDATSUS 0x04
#define LmMnDATACT 0x02
#define LmMnDATEN 0x01
/* mode 0-1 */
#define LmMnDDMAMODE(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x5E)
#define LmMnDMATYPE_NORMAL 0x0000
#define LmMnDMATYPE_HOST_ONLY_TX 0x0001
#define LmMnDMATYPE_DEVICE_ONLY_TX 0x0002
#define LmMnDMATYPE_INVALID 0x0003
#define LmMnDMATYPE_MASK 0x0003
#define LmMnDMAWRAP 0x0004
#define LmMnBITBUCKET 0x0008
#define LmMnDISHDR 0x0010
#define LmMnSTPCRC 0x0020
#define LmXTEST 0x0040
#define LmMnDISCRC 0x0080
#define LmMnENINTLK 0x0100
#define LmMnADDRFRM 0x0400
#define LmMnENXMTCRC 0x0800
/* mode 0-1 */
#define LmMnXFRCNT(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x70)
/* mode 0-1 */
#define LmMnDPSEL(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x7B)
#define LmMnDPSEL_MASK 0x07
#define LmMnEOLPRE 0x40
#define LmMnEOSPRE 0x80
/* Registers used in conjunction with LmMnDPSEL and LmMnDPACC registers */
/* Receive Mode n = 0 */
#define LmMnHRADDR 0x00
#define LmMnHBYTECNT 0x01
#define LmMnHREWIND 0x02
#define LmMnDWADDR 0x03
#define LmMnDSPACECNT 0x04
#define LmMnDFRMSIZE 0x05
/* Registers used in conjunction with LmMnDPSEL and LmMnDPACC registers */
/* Transmit Mode n = 1 */
#define LmMnHWADDR 0x00
#define LmMnHSPACECNT 0x01
/* #define LmMnHREWIND 0x02 */
#define LmMnDRADDR 0x03
#define LmMnDBYTECNT 0x04
/* #define LmMnDFRMSIZE 0x05 */
/* mode 0-1 */
#define LmMnDPACC(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x78)
#define LmMnDPACC_MASK 0x00FFFFFF
/* mode 0-1 */
#define LmMnHOLDLVL(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x7D)
#define LmPRMSTAT0(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x80)
#define LmPRMSTAT0BYTE0 0x80
#define LmPRMSTAT0BYTE1 0x81
#define LmPRMSTAT0BYTE2 0x82
#define LmPRMSTAT0BYTE3 0x83
#define LmFRAMERCVD 0x80000000
#define LmXFRRDYRCVD 0x40000000
#define LmUNKNOWNP 0x20000000
#define LmBREAK 0x10000000
#define LmDONE 0x08000000
#define LmOPENACPT 0x04000000
#define LmOPENRJCT 0x02000000
#define LmOPENRTRY 0x01000000
#define LmCLOSERV1 0x00800000
#define LmCLOSERV0 0x00400000
#define LmCLOSENORM 0x00200000
#define LmCLOSECLAF 0x00100000
#define LmNOTIFYRV2 0x00080000
#define LmNOTIFYRV1 0x00040000
#define LmNOTIFYRV0 0x00020000
#define LmNOTIFYSPIN 0x00010000
#define LmBROADRV4 0x00008000
#define LmBROADRV3 0x00004000
#define LmBROADRV2 0x00002000
#define LmBROADRV1 0x00001000
#define LmBROADSES 0x00000800
#define LmBROADRVCH1 0x00000400
#define LmBROADRVCH0 0x00000200
#define LmBROADCH 0x00000100
#define LmAIPRVWP 0x00000080
#define LmAIPWP 0x00000040
#define LmAIPWD 0x00000020
#define LmAIPWC 0x00000010
#define LmAIPRV2 0x00000008
#define LmAIPRV1 0x00000004
#define LmAIPRV0 0x00000002
#define LmAIPNRML 0x00000001
#define LmBROADCAST_MASK (LmBROADCH | LmBROADRVCH0 | \
LmBROADRVCH1)
#define LmPRMSTAT1(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0x84)
#define LmPRMSTAT1BYTE0 0x84
#define LmPRMSTAT1BYTE1 0x85
#define LmPRMSTAT1BYTE2 0x86
#define LmPRMSTAT1BYTE3 0x87
#define LmFRMRCVDSTAT 0x80000000
#define LmBREAK_DET 0x04000000
#define LmCLOSE_DET 0x02000000
#define LmDONE_DET 0x01000000
#define LmXRDY 0x00040000
#define LmSYNCSRST 0x00020000
#define LmSYNC 0x00010000
#define LmXHOLD 0x00008000
#define LmRRDY 0x00004000
#define LmHOLD 0x00002000
#define LmROK 0x00001000
#define LmRIP 0x00000800
#define LmCRBLK 0x00000400
#define LmACK 0x00000200
#define LmNAK 0x00000100
#define LmHARDRST 0x00000080
#define LmERROR 0x00000040
#define LmRERR 0x00000020
#define LmPMREQP 0x00000010
#define LmPMREQS 0x00000008
#define LmPMACK 0x00000004
#define LmPMNAK 0x00000002
#define LmDMAT 0x00000001
/* mode 1 */
#define LmMnSATAFS(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x7E)
#define LmMnXMTSIZE(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0x93)
/* mode 0 */
#define LmMnFRMERR(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0xB0)
#define LmACRCERR 0x00000800
#define LmPHYOVRN 0x00000400
#define LmOBOVRN 0x00000200
#define LmMnZERODATA 0x00000100
#define LmSATAINTLK 0x00000080
#define LmMnCRCERR 0x00000020
#define LmRRDYOVRN 0x00000010
#define LmMISSSOAF 0x00000008
#define LmMISSSOF 0x00000004
#define LmMISSEOAF 0x00000002
#define LmMISSEOF 0x00000001
#define LmFRMERREN(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xB4)
#define EN_LmACRCERR 0x00000800
#define EN_LmPHYOVRN 0x00000400
#define EN_LmOBOVRN 0x00000200
#define EN_LmMnZERODATA 0x00000100
#define EN_LmSATAINTLK 0x00000080
#define EN_LmFRMBAD 0x00000040
#define EN_LmMnCRCERR 0x00000020
#define EN_LmRRDYOVRN 0x00000010
#define EN_LmMISSSOAF 0x00000008
#define EN_LmMISSSOF 0x00000004
#define EN_LmMISSEOAF 0x00000002
#define EN_LmMISSEOF 0x00000001
#define LmFRMERREN_MASK (EN_LmSATAINTLK | EN_LmMnCRCERR | \
EN_LmRRDYOVRN | EN_LmMISSSOF | \
EN_LmMISSEOAF | EN_LmMISSEOF | \
EN_LmACRCERR | LmPHYOVRN | \
EN_LmOBOVRN | EN_LmMnZERODATA)
#define LmHWTSTATEN(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xC5)
#define EN_LmDONETO 0x80
#define EN_LmINVDISP 0x40
#define EN_LmINVDW 0x20
#define EN_LmDWSEVENT 0x08
#define EN_LmCRTTTO 0x04
#define EN_LmANTTTO 0x02
#define EN_LmBITLTTO 0x01
#define LmHWTSTATEN_MASK (EN_LmINVDISP | EN_LmINVDW | \
EN_LmDWSEVENT | EN_LmCRTTTO | \
EN_LmANTTTO | EN_LmDONETO | \
EN_LmBITLTTO)
#define LmHWTSTAT(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xC7)
#define LmDONETO 0x80
#define LmINVDISP 0x40
#define LmINVDW 0x20
#define LmDWSEVENT 0x08
#define LmCRTTTO 0x04
#define LmANTTTO 0x02
#define LmBITLTTO 0x01
#define LmMnDATABUFADR(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0xC8)
#define LmDATABUFADR_MASK 0x0FFF
#define LmMnDATABUF(LinkNum, Mode) LmSEQ_PHY_REG(Mode, LinkNum, 0xCA)
#define LmPRIMSTAT0EN(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xE0)
#define EN_LmUNKNOWNP 0x20000000
#define EN_LmBREAK 0x10000000
#define EN_LmDONE 0x08000000
#define EN_LmOPENACPT 0x04000000
#define EN_LmOPENRJCT 0x02000000
#define EN_LmOPENRTRY 0x01000000
#define EN_LmCLOSERV1 0x00800000
#define EN_LmCLOSERV0 0x00400000
#define EN_LmCLOSENORM 0x00200000
#define EN_LmCLOSECLAF 0x00100000
#define EN_LmNOTIFYRV2 0x00080000
#define EN_LmNOTIFYRV1 0x00040000
#define EN_LmNOTIFYRV0 0x00020000
#define EN_LmNOTIFYSPIN 0x00010000
#define EN_LmBROADRV4 0x00008000
#define EN_LmBROADRV3 0x00004000
#define EN_LmBROADRV2 0x00002000
#define EN_LmBROADRV1 0x00001000
#define EN_LmBROADRV0 0x00000800
#define EN_LmBROADRVCH1 0x00000400
#define EN_LmBROADRVCH0 0x00000200
#define EN_LmBROADCH 0x00000100
#define EN_LmAIPRVWP 0x00000080
#define EN_LmAIPWP 0x00000040
#define EN_LmAIPWD 0x00000020
#define EN_LmAIPWC 0x00000010
#define EN_LmAIPRV2 0x00000008
#define EN_LmAIPRV1 0x00000004
#define EN_LmAIPRV0 0x00000002
#define EN_LmAIPNRML 0x00000001
#define LmPRIMSTAT0EN_MASK (EN_LmBREAK | \
EN_LmDONE | EN_LmOPENACPT | \
EN_LmOPENRJCT | EN_LmOPENRTRY | \
EN_LmCLOSERV1 | EN_LmCLOSERV0 | \
EN_LmCLOSENORM | EN_LmCLOSECLAF | \
EN_LmBROADRV4 | EN_LmBROADRV3 | \
EN_LmBROADRV2 | EN_LmBROADRV1 | \
EN_LmBROADRV0 | EN_LmBROADRVCH1 | \
EN_LmBROADRVCH0 | EN_LmBROADCH | \
EN_LmAIPRVWP | EN_LmAIPWP | \
EN_LmAIPWD | EN_LmAIPWC | \
EN_LmAIPRV2 | EN_LmAIPRV1 | \
EN_LmAIPRV0 | EN_LmAIPNRML)
#define LmPRIMSTAT1EN(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xE4)
#define EN_LmXRDY 0x00040000
#define EN_LmSYNCSRST 0x00020000
#define EN_LmSYNC 0x00010000
#define EN_LmXHOLD 0x00008000
#define EN_LmRRDY 0x00004000
#define EN_LmHOLD 0x00002000
#define EN_LmROK 0x00001000
#define EN_LmRIP 0x00000800
#define EN_LmCRBLK 0x00000400
#define EN_LmACK 0x00000200
#define EN_LmNAK 0x00000100
#define EN_LmHARDRST 0x00000080
#define EN_LmERROR 0x00000040
#define EN_LmRERR 0x00000020
#define EN_LmPMREQP 0x00000010
#define EN_LmPMREQS 0x00000008
#define EN_LmPMACK 0x00000004
#define EN_LmPMNAK 0x00000002
#define EN_LmDMAT 0x00000001
#define LmPRIMSTAT1EN_MASK (EN_LmHARDRST | \
EN_LmSYNCSRST | \
EN_LmPMREQP | EN_LmPMREQS | \
EN_LmPMACK | EN_LmPMNAK)
#define LmSMSTATE(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xE8)
#define LmSMSTATEBRK(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xEC)
#define LmSMDBGCTL(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xF0)
/*
* LmSEQ CIO Bus Mode 3 Register.
* Mode 3: Configuration and Setup, IOP Context SCB.
*/
#define LmM3SATATIMER(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x48)
#define LmM3INTVEC0(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x90)
#define LmM3INTVEC1(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x92)
#define LmM3INTVEC2(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x94)
#define LmM3INTVEC3(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x96)
#define LmM3INTVEC4(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x98)
#define LmM3INTVEC5(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x9A)
#define LmM3INTVEC6(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x9C)
#define LmM3INTVEC7(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0x9E)
#define LmM3INTVEC8(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0xA4)
#define LmM3INTVEC9(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0xA6)
#define LmM3INTVEC10(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0xB0)
#define LmM3FRMGAP(LinkNum) LmSEQ_PHY_REG(3, LinkNum, 0xB4)
#define LmBITL_TIMER(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xA2)
#define LmWWN(LinkNum) LmSEQ_PHY_REG(0, LinkNum, 0xA8)
/*
* LmSEQ CIO Bus Mode 5 Registers.
* Mode 5: Phy/OOB Control and Status.
*/
#define LmSEQ_OOB_REG(phy_id, reg) LmSEQ_PHY_REG(5, (phy_id), (reg))
#define OOB_BFLTR 0x100
#define BFLTR_THR_MASK 0xF0
#define BFLTR_TC_MASK 0x0F
#define OOB_INIT_MIN 0x102
#define OOB_INIT_MAX 0x104
#define OOB_INIT_NEG 0x106
#define OOB_SAS_MIN 0x108
#define OOB_SAS_MAX 0x10A
#define OOB_SAS_NEG 0x10C
#define OOB_WAKE_MIN 0x10E
#define OOB_WAKE_MAX 0x110
#define OOB_WAKE_NEG 0x112
#define OOB_IDLE_MAX 0x114
#define OOB_BURST_MAX 0x116
#define OOB_DATA_KBITS 0x126
#define OOB_ALIGN_0_DATA 0x12C
#define OOB_ALIGN_1_DATA 0x130
#define D10_2_DATA_k 0x00
#define SYNC_DATA_k 0x02
#define ALIGN_1_DATA_k 0x04
#define ALIGN_0_DATA_k 0x08
#define BURST_DATA_k 0x10
#define OOB_PHY_RESET_COUNT 0x13C
#define OOB_SIG_GEN 0x140
#define START_OOB 0x80
#define START_DWS 0x40
#define ALIGN_CNT3 0x30
#define ALIGN_CNT2 0x20
#define ALIGN_CNT1 0x10
#define ALIGN_CNT4 0x00
#define STOP_DWS 0x08
#define SEND_COMSAS 0x04
#define SEND_COMINIT 0x02
#define SEND_COMWAKE 0x01
#define OOB_XMIT 0x141
#define TX_ENABLE 0x80
#define XMIT_OOB_BURST 0x10
#define XMIT_D10_2 0x08
#define XMIT_SYNC 0x04
#define XMIT_ALIGN_1 0x02
#define XMIT_ALIGN_0 0x01
#define FUNCTION_MASK 0x142
#define SAS_MODE_DIS 0x80
#define SATA_MODE_DIS 0x40
#define SPINUP_HOLD_DIS 0x20
#define HOT_PLUG_DIS 0x10
#define SATA_PS_DIS 0x08
#define FUNCTION_MASK_DEFAULT (SPINUP_HOLD_DIS | SATA_PS_DIS)
#define OOB_MODE 0x143
#define SAS_MODE 0x80
#define SATA_MODE 0x40
#define SLOW_CLK 0x20
#define FORCE_XMIT_15 0x08
#define PHY_SPEED_60 0x04
#define PHY_SPEED_30 0x02
#define PHY_SPEED_15 0x01
#define CURRENT_STATUS 0x144
#define CURRENT_OOB_DONE 0x80
#define CURRENT_LOSS_OF_SIGNAL 0x40
#define CURRENT_SPINUP_HOLD 0x20
#define CURRENT_HOT_PLUG_CNCT 0x10
#define CURRENT_GTO_TIMEOUT 0x08
#define CURRENT_OOB_TIMEOUT 0x04
#define CURRENT_DEVICE_PRESENT 0x02
#define CURRENT_OOB_ERROR 0x01
#define CURRENT_OOB1_ERROR (CURRENT_HOT_PLUG_CNCT | \
CURRENT_GTO_TIMEOUT)
#define CURRENT_OOB2_ERROR (CURRENT_HOT_PLUG_CNCT | \
CURRENT_OOB_ERROR)
#define DEVICE_ADDED_W_CNT (CURRENT_OOB_DONE | \
CURRENT_HOT_PLUG_CNCT | \
CURRENT_DEVICE_PRESENT)
#define DEVICE_ADDED_WO_CNT (CURRENT_OOB_DONE | \
CURRENT_DEVICE_PRESENT)
#define DEVICE_REMOVED CURRENT_LOSS_OF_SIGNAL
#define CURRENT_PHY_MASK (CURRENT_OOB_DONE | \
CURRENT_LOSS_OF_SIGNAL | \
CURRENT_SPINUP_HOLD | \
CURRENT_HOT_PLUG_CNCT | \
CURRENT_GTO_TIMEOUT | \
CURRENT_DEVICE_PRESENT | \
CURRENT_OOB_ERROR )
#define CURRENT_ERR_MASK (CURRENT_LOSS_OF_SIGNAL | \
CURRENT_GTO_TIMEOUT | \
CURRENT_OOB_TIMEOUT | \
CURRENT_OOB_ERROR )
#define SPEED_MASK 0x145
#define SATA_SPEED_30_DIS 0x10
#define SATA_SPEED_15_DIS 0x08
#define SAS_SPEED_60_DIS 0x04
#define SAS_SPEED_30_DIS 0x02
#define SAS_SPEED_15_DIS 0x01
#define SAS_SPEED_MASK_DEFAULT 0x00
#define OOB_TIMER_ENABLE 0x14D
#define HOT_PLUG_EN 0x80
#define RCD_EN 0x40
#define COMTIMER_EN 0x20
#define SNTT_EN 0x10
#define SNLT_EN 0x04
#define SNWT_EN 0x02
#define ALIGN_EN 0x01
#define OOB_STATUS 0x14E
#define OOB_DONE 0x80
#define LOSS_OF_SIGNAL 0x40 /* ro */
#define SPINUP_HOLD 0x20
#define HOT_PLUG_CNCT 0x10 /* ro */
#define GTO_TIMEOUT 0x08 /* ro */
#define OOB_TIMEOUT 0x04 /* ro */
#define DEVICE_PRESENT 0x02 /* ro */
#define OOB_ERROR 0x01 /* ro */
#define OOB_STATUS_ERROR_MASK (LOSS_OF_SIGNAL | GTO_TIMEOUT | \
OOB_TIMEOUT | OOB_ERROR)
#define OOB_STATUS_CLEAR 0x14F
#define OOB_DONE_CLR 0x80
#define LOSS_OF_SIGNAL_CLR 0x40
#define SPINUP_HOLD_CLR 0x20
#define HOT_PLUG_CNCT_CLR 0x10
#define GTO_TIMEOUT_CLR 0x08
#define OOB_TIMEOUT_CLR 0x04
#define OOB_ERROR_CLR 0x01
#define HOT_PLUG_DELAY 0x150
/* In 5 ms units. 20 = 100 ms. */
#define HOTPLUG_DELAY_TIMEOUT 20
#define INT_ENABLE_2 0x15A
#define OOB_DONE_EN 0x80
#define LOSS_OF_SIGNAL_EN 0x40
#define SPINUP_HOLD_EN 0x20
#define HOT_PLUG_CNCT_EN 0x10
#define GTO_TIMEOUT_EN 0x08
#define OOB_TIMEOUT_EN 0x04
#define DEVICE_PRESENT_EN 0x02
#define OOB_ERROR_EN 0x01
#define PHY_CONTROL_0 0x160
#define PHY_LOWPWREN_TX 0x80
#define PHY_LOWPWREN_RX 0x40
#define SPARE_REG_160_B5 0x20
#define OFFSET_CANCEL_RX 0x10
/* bits 3:2 */
#define PHY_RXCOMCENTER_60V 0x00
#define PHY_RXCOMCENTER_70V 0x04
#define PHY_RXCOMCENTER_80V 0x08
#define PHY_RXCOMCENTER_90V 0x0C
#define PHY_RXCOMCENTER_MASK 0x0C
#define PHY_RESET 0x02
#define SAS_DEFAULT_SEL 0x01
#define PHY_CONTROL_1 0x161
/* bits 2:0 */
#define SATA_PHY_DETLEVEL_50mv 0x00
#define SATA_PHY_DETLEVEL_75mv 0x01
#define SATA_PHY_DETLEVEL_100mv 0x02
#define SATA_PHY_DETLEVEL_125mv 0x03
#define SATA_PHY_DETLEVEL_150mv 0x04
#define SATA_PHY_DETLEVEL_175mv 0x05
#define SATA_PHY_DETLEVEL_200mv 0x06
#define SATA_PHY_DETLEVEL_225mv 0x07
#define SATA_PHY_DETLEVEL_MASK 0x07
/* bits 5:3 */
#define SAS_PHY_DETLEVEL_50mv 0x00
#define SAS_PHY_DETLEVEL_75mv 0x08
#define SAS_PHY_DETLEVEL_100mv 0x10
#define SAS_PHY_DETLEVEL_125mv 0x11
#define SAS_PHY_DETLEVEL_150mv 0x20
#define SAS_PHY_DETLEVEL_175mv 0x21
#define SAS_PHY_DETLEVEL_200mv 0x30
#define SAS_PHY_DETLEVEL_225mv 0x31
#define SAS_PHY_DETLEVEL_MASK 0x38
#define PHY_CONTROL_2 0x162
/* bits 7:5 */
#define SATA_PHY_DRV_400mv 0x00
#define SATA_PHY_DRV_450mv 0x20
#define SATA_PHY_DRV_500mv 0x40
#define SATA_PHY_DRV_550mv 0x60
#define SATA_PHY_DRV_600mv 0x80
#define SATA_PHY_DRV_650mv 0xA0
#define SATA_PHY_DRV_725mv 0xC0
#define SATA_PHY_DRV_800mv 0xE0
#define SATA_PHY_DRV_MASK 0xE0
/* bits 4:3 */
#define SATA_PREEMP_0 0x00
#define SATA_PREEMP_1 0x08
#define SATA_PREEMP_2 0x10
#define SATA_PREEMP_3 0x18
#define SATA_PREEMP_MASK 0x18
#define SATA_CMSH1P5 0x04
/* bits 1:0 */
#define SATA_SLEW_0 0x00
#define SATA_SLEW_1 0x01
#define SATA_SLEW_2 0x02
#define SATA_SLEW_3 0x03
#define SATA_SLEW_MASK 0x03
#define PHY_CONTROL_3 0x163
/* bits 7:5 */
#define SAS_PHY_DRV_400mv 0x00
#define SAS_PHY_DRV_450mv 0x20
#define SAS_PHY_DRV_500mv 0x40
#define SAS_PHY_DRV_550mv 0x60
#define SAS_PHY_DRV_600mv 0x80
#define SAS_PHY_DRV_650mv 0xA0
#define SAS_PHY_DRV_725mv 0xC0
#define SAS_PHY_DRV_800mv 0xE0
#define SAS_PHY_DRV_MASK 0xE0
/* bits 4:3 */
#define SAS_PREEMP_0 0x00
#define SAS_PREEMP_1 0x08
#define SAS_PREEMP_2 0x10
#define SAS_PREEMP_3 0x18
#define SAS_PREEMP_MASK 0x18
#define SAS_CMSH1P5 0x04
/* bits 1:0 */
#define SAS_SLEW_0 0x00
#define SAS_SLEW_1 0x01
#define SAS_SLEW_2 0x02
#define SAS_SLEW_3 0x03
#define SAS_SLEW_MASK 0x03
#define PHY_CONTROL_4 0x168
#define PHY_DONE_CAL_TX 0x80
#define PHY_DONE_CAL_RX 0x40
#define RX_TERM_LOAD_DIS 0x20
#define TX_TERM_LOAD_DIS 0x10
#define AUTO_TERM_CAL_DIS 0x08
#define PHY_SIGDET_FLTR_EN 0x04
#define OSC_FREQ 0x02
#define PHY_START_CAL 0x01
/*
* HST_PCIX2 Registers, Addresss Range: (0x00-0xFC)
*/
#define PCIX_REG_BASE_ADR 0xB8040000
#define PCIC_VENDOR_ID 0x00
#define PCIC_DEVICE_ID 0x02
#define PCIC_COMMAND 0x04
#define INT_DIS 0x0400
#define FBB_EN 0x0200 /* ro */
#define SERR_EN 0x0100
#define STEP_EN 0x0080 /* ro */
#define PERR_EN 0x0040
#define VGA_EN 0x0020 /* ro */
#define MWI_EN 0x0010
#define SPC_EN 0x0008
#define MST_EN 0x0004
#define MEM_EN 0x0002
#define IO_EN 0x0001
#define PCIC_STATUS 0x06
#define PERR_DET 0x8000
#define SERR_GEN 0x4000
#define MABT_DET 0x2000
#define TABT_DET 0x1000
#define TABT_GEN 0x0800
#define DPERR_DET 0x0100
#define CAP_LIST 0x0010
#define INT_STAT 0x0008
#define PCIC_DEVREV_ID 0x08
#define PCIC_CLASS_CODE 0x09
#define PCIC_CACHELINE_SIZE 0x0C
#define PCIC_MBAR0 0x10
#define PCIC_MBAR0_OFFSET 0
#define PCIC_MBAR1 0x18
#define PCIC_MBAR1_OFFSET 2
#define PCIC_IOBAR 0x20
#define PCIC_IOBAR_OFFSET 4
#define PCIC_SUBVENDOR_ID 0x2C
#define PCIC_SUBSYTEM_ID 0x2E
#define PCIX_STATUS 0x44
#define RCV_SCE 0x20000000
#define UNEXP_SC 0x00080000
#define SC_DISCARD 0x00040000
#define ECC_CTRL_STAT 0x48
#define UNCOR_ECCERR 0x00000008
#define PCIC_PM_CSR 0x5C
#define PWR_STATE_D0 0
#define PWR_STATE_D1 1 /* not supported */
#define PWR_STATE_D2 2 /* not supported */
#define PWR_STATE_D3 3
#define PCIC_BASE1 0x6C /* internal use only */
#define BASE1_RSVD 0xFFFFFFF8
#define PCIC_BASEA 0x70 /* internal use only */
#define BASEA_RSVD 0xFFFFFFC0
#define BASEA_START 0
#define PCIC_BASEB 0x74 /* internal use only */
#define BASEB_RSVD 0xFFFFFF80
#define BASEB_IOMAP_MASK 0x7F
#define BASEB_START 0x80
#define PCIC_BASEC 0x78 /* internal use only */
#define BASEC_RSVD 0xFFFFFFFC
#define BASEC_MASK 0x03
#define BASEC_START 0x58
#define PCIC_MBAR_KEY 0x7C /* internal use only */
#define MBAR_KEY_MASK 0xFFFFFFFF
#define PCIC_HSTPCIX_CNTRL 0xA0
#define REWIND_DIS 0x0800
#define SC_TMR_DIS 0x04000000
#define PCIC_MBAR0_MASK 0xA8
#define PCIC_MBAR0_SIZE_MASK 0x1FFFE000
#define PCIC_MBAR0_SIZE_SHIFT 13
#define PCIC_MBAR0_SIZE(val) \
(((val) & PCIC_MBAR0_SIZE_MASK) >> PCIC_MBAR0_SIZE_SHIFT)
#define PCIC_FLASH_MBAR 0xB8
#define PCIC_INTRPT_STAT 0xD4
#define PCIC_TP_CTRL 0xFC
/*
* EXSI Registers, Addresss Range: (0x00-0xFC)
*/
#define EXSI_REG_BASE_ADR REG_BASE_ADDR_EXSI
#define EXSICNFGR (EXSI_REG_BASE_ADR + 0x00)
#define OCMINITIALIZED 0x80000000
#define ASIEN 0x00400000
#define HCMODE 0x00200000
#define PCIDEF 0x00100000
#define COMSTOCK 0x00080000
#define SEEPROMEND 0x00040000
#define MSTTIMEN 0x00020000
#define XREGEX 0x00000200
#define NVRAMW 0x00000100
#define NVRAMEX 0x00000080
#define SRAMW 0x00000040
#define SRAMEX 0x00000020
#define FLASHW 0x00000010
#define FLASHEX 0x00000008
#define SEEPROMCFG 0x00000004
#define SEEPROMTYP 0x00000002
#define SEEPROMEX 0x00000001
#define EXSICNTRLR (EXSI_REG_BASE_ADR + 0x04)
#define MODINT_EN 0x00000001
#define PMSTATR (EXSI_REG_BASE_ADR + 0x10)
#define FLASHRST 0x00000002
#define FLASHRDY 0x00000001
#define FLCNFGR (EXSI_REG_BASE_ADR + 0x14)
#define FLWEH_MASK 0x30000000
#define FLWESU_MASK 0x0C000000
#define FLWEPW_MASK 0x03F00000
#define FLOEH_MASK 0x000C0000
#define FLOESU_MASK 0x00030000
#define FLOEPW_MASK 0x0000FC00
#define FLCSH_MASK 0x00000300
#define FLCSSU_MASK 0x000000C0
#define FLCSPW_MASK 0x0000003F
#define SRCNFGR (EXSI_REG_BASE_ADR + 0x18)
#define SRWEH_MASK 0x30000000
#define SRWESU_MASK 0x0C000000
#define SRWEPW_MASK 0x03F00000
#define SROEH_MASK 0x000C0000
#define SROESU_MASK 0x00030000
#define SROEPW_MASK 0x0000FC00
#define SRCSH_MASK 0x00000300
#define SRCSSU_MASK 0x000000C0
#define SRCSPW_MASK 0x0000003F
#define NVCNFGR (EXSI_REG_BASE_ADR + 0x1C)
#define NVWEH_MASK 0x30000000
#define NVWESU_MASK 0x0C000000
#define NVWEPW_MASK 0x03F00000
#define NVOEH_MASK 0x000C0000
#define NVOESU_MASK 0x00030000
#define NVOEPW_MASK 0x0000FC00
#define NVCSH_MASK 0x00000300
#define NVCSSU_MASK 0x000000C0
#define NVCSPW_MASK 0x0000003F
#define XRCNFGR (EXSI_REG_BASE_ADR + 0x20)
#define XRWEH_MASK 0x30000000
#define XRWESU_MASK 0x0C000000
#define XRWEPW_MASK 0x03F00000
#define XROEH_MASK 0x000C0000
#define XROESU_MASK 0x00030000
#define XROEPW_MASK 0x0000FC00
#define XRCSH_MASK 0x00000300
#define XRCSSU_MASK 0x000000C0
#define XRCSPW_MASK 0x0000003F
#define XREGADDR (EXSI_REG_BASE_ADR + 0x24)
#define XRADDRINCEN 0x80000000
#define XREGADD_MASK 0x007FFFFF
#define XREGDATAR (EXSI_REG_BASE_ADR + 0x28)
#define XREGDATA_MASK 0x0000FFFF
#define GPIOOER (EXSI_REG_BASE_ADR + 0x40)
#define GPIOODENR (EXSI_REG_BASE_ADR + 0x44)
#define GPIOINVR (EXSI_REG_BASE_ADR + 0x48)
#define GPIODATAOR (EXSI_REG_BASE_ADR + 0x4C)
#define GPIODATAIR (EXSI_REG_BASE_ADR + 0x50)
#define GPIOCNFGR (EXSI_REG_BASE_ADR + 0x54)
#define GPIO_EXTSRC 0x00000001
#define SCNTRLR (EXSI_REG_BASE_ADR + 0xA0)
#define SXFERDONE 0x00000100
#define SXFERCNT_MASK 0x000000E0
#define SCMDTYP_MASK 0x0000001C
#define SXFERSTART 0x00000002
#define SXFEREN 0x00000001
#define SRATER (EXSI_REG_BASE_ADR + 0xA4)
#define SADDRR (EXSI_REG_BASE_ADR + 0xA8)
#define SADDR_MASK 0x0000FFFF
#define SDATAOR (EXSI_REG_BASE_ADR + 0xAC)
#define SDATAOR0 (EXSI_REG_BASE_ADR + 0xAC)
#define SDATAOR1 (EXSI_REG_BASE_ADR + 0xAD)
#define SDATAOR2 (EXSI_REG_BASE_ADR + 0xAE)
#define SDATAOR3 (EXSI_REG_BASE_ADR + 0xAF)
#define SDATAIR (EXSI_REG_BASE_ADR + 0xB0)
#define SDATAIR0 (EXSI_REG_BASE_ADR + 0xB0)
#define SDATAIR1 (EXSI_REG_BASE_ADR + 0xB1)
#define SDATAIR2 (EXSI_REG_BASE_ADR + 0xB2)
#define SDATAIR3 (EXSI_REG_BASE_ADR + 0xB3)
#define ASISTAT0R (EXSI_REG_BASE_ADR + 0xD0)
#define ASIFMTERR 0x00000400
#define ASISEECHKERR 0x00000200
#define ASIERR 0x00000100
#define ASISTAT1R (EXSI_REG_BASE_ADR + 0xD4)
#define CHECKSUM_MASK 0x0000FFFF
#define ASIERRADDR (EXSI_REG_BASE_ADR + 0xD8)
#define ASIERRDATAR (EXSI_REG_BASE_ADR + 0xDC)
#define ASIERRSTATR (EXSI_REG_BASE_ADR + 0xE0)
#define CPI2ASIBYTECNT_MASK 0x00070000
#define CPI2ASIBYTEEN_MASK 0x0000F000
#define CPI2ASITARGERR_MASK 0x00000F00
#define CPI2ASITARGMID_MASK 0x000000F0
#define CPI2ASIMSTERR_MASK 0x0000000F
/*
* XSRAM, External SRAM (DWord and any BE pattern accessible)
*/
#define XSRAM_REG_BASE_ADDR 0xB8100000
#define XSRAM_SIZE 0x100000
/*
* NVRAM Registers, Address Range: (0x00000 - 0x3FFFF).
*/
#define NVRAM_REG_BASE_ADR 0xBF800000
#define NVRAM_MAX_BASE_ADR 0x003FFFFF
/* OCM base address */
#define OCM_BASE_ADDR 0xA0000000
#define OCM_MAX_SIZE 0x20000
/*
* Sequencers (Central and Link) Scratch RAM page definitions.
*/
/*
* The Central Management Sequencer (CSEQ) Scratch Memory is a 1024
* byte memory. It is dword accessible and has byte parity
* protection. The CSEQ accesses it in 32 byte windows, either as mode
* dependent or mode independent memory. Each mode has 96 bytes,
* (three 32 byte pages 0-2, not contiguous), leaving 128 bytes of
* Mode Independent memory (four 32 byte pages 3-7). Note that mode
* dependent scratch memory, Mode 8, page 0-3 overlaps mode
* independent scratch memory, pages 0-3.
* - 896 bytes of mode dependent scratch, 96 bytes per Modes 0-7, and
* 128 bytes in mode 8,
* - 259 bytes of mode independent scratch, common to modes 0-15.
*
* Sequencer scratch RAM is 1024 bytes. This scratch memory is
* divided into mode dependent and mode independent scratch with this
* memory further subdivided into pages of size 32 bytes. There are 5
* pages (160 bytes) of mode independent scratch and 3 pages of
* dependent scratch memory for modes 0-7 (768 bytes). Mode 8 pages
* 0-2 dependent scratch overlap with pages 0-2 of mode independent
* scratch memory.
*
* The host accesses this scratch in a different manner from the
* central sequencer. The sequencer has to use CSEQ registers CSCRPAGE
* and CMnSCRPAGE to access the scratch memory. A flat mapping of the
* scratch memory is available for software convenience and to prevent
* corruption while the sequencer is running. This memory is mapped
* onto addresses 800h - BFFh, total of 400h bytes.
*
* These addresses are mapped as follows:
*
* 800h-83Fh Mode Dependent Scratch Mode 0 Pages 0-1
* 840h-87Fh Mode Dependent Scratch Mode 1 Pages 0-1
* 880h-8BFh Mode Dependent Scratch Mode 2 Pages 0-1
* 8C0h-8FFh Mode Dependent Scratch Mode 3 Pages 0-1
* 900h-93Fh Mode Dependent Scratch Mode 4 Pages 0-1
* 940h-97Fh Mode Dependent Scratch Mode 5 Pages 0-1
* 980h-9BFh Mode Dependent Scratch Mode 6 Pages 0-1
* 9C0h-9FFh Mode Dependent Scratch Mode 7 Pages 0-1
* A00h-A5Fh Mode Dependent Scratch Mode 8 Pages 0-2
* Mode Independent Scratch Pages 0-2
* A60h-A7Fh Mode Dependent Scratch Mode 8 Page 3
* Mode Independent Scratch Page 3
* A80h-AFFh Mode Independent Scratch Pages 4-7
* B00h-B1Fh Mode Dependent Scratch Mode 0 Page 2
* B20h-B3Fh Mode Dependent Scratch Mode 1 Page 2
* B40h-B5Fh Mode Dependent Scratch Mode 2 Page 2
* B60h-B7Fh Mode Dependent Scratch Mode 3 Page 2
* B80h-B9Fh Mode Dependent Scratch Mode 4 Page 2
* BA0h-BBFh Mode Dependent Scratch Mode 5 Page 2
* BC0h-BDFh Mode Dependent Scratch Mode 6 Page 2
* BE0h-BFFh Mode Dependent Scratch Mode 7 Page 2
*/
/* General macros */
#define CSEQ_PAGE_SIZE 32 /* Scratch page size (in bytes) */
/* All macros start with offsets from base + 0x800 (CMAPPEDSCR).
* Mode dependent scratch page 0, mode 0.
* For modes 1-7 you have to do arithmetic. */
#define CSEQ_LRM_SAVE_SINDEX (CMAPPEDSCR + 0x0000)
#define CSEQ_LRM_SAVE_SCBPTR (CMAPPEDSCR + 0x0002)
#define CSEQ_Q_LINK_HEAD (CMAPPEDSCR + 0x0004)
#define CSEQ_Q_LINK_TAIL (CMAPPEDSCR + 0x0006)
#define CSEQ_LRM_SAVE_SCRPAGE (CMAPPEDSCR + 0x0008)
/* Mode dependent scratch page 0 mode 8 macros. */
#define CSEQ_RET_ADDR (CMAPPEDSCR + 0x0200)
#define CSEQ_RET_SCBPTR (CMAPPEDSCR + 0x0202)
#define CSEQ_SAVE_SCBPTR (CMAPPEDSCR + 0x0204)
#define CSEQ_EMPTY_TRANS_CTX (CMAPPEDSCR + 0x0206)
#define CSEQ_RESP_LEN (CMAPPEDSCR + 0x0208)
#define CSEQ_TMF_SCBPTR (CMAPPEDSCR + 0x020A)
#define CSEQ_GLOBAL_PREV_SCB (CMAPPEDSCR + 0x020C)
#define CSEQ_GLOBAL_HEAD (CMAPPEDSCR + 0x020E)
#define CSEQ_CLEAR_LU_HEAD (CMAPPEDSCR + 0x0210)
#define CSEQ_TMF_OPCODE (CMAPPEDSCR + 0x0212)
#define CSEQ_SCRATCH_FLAGS (CMAPPEDSCR + 0x0213)
#define CSEQ_HSB_SITE (CMAPPEDSCR + 0x021A)
#define CSEQ_FIRST_INV_SCB_SITE (CMAPPEDSCR + 0x021C)
#define CSEQ_FIRST_INV_DDB_SITE (CMAPPEDSCR + 0x021E)
/* Mode dependent scratch page 1 mode 8 macros. */
#define CSEQ_LUN_TO_CLEAR (CMAPPEDSCR + 0x0220)
#define CSEQ_LUN_TO_CHECK (CMAPPEDSCR + 0x0228)
/* Mode dependent scratch page 2 mode 8 macros */
#define CSEQ_HQ_NEW_POINTER (CMAPPEDSCR + 0x0240)
#define CSEQ_HQ_DONE_BASE (CMAPPEDSCR + 0x0248)
#define CSEQ_HQ_DONE_POINTER (CMAPPEDSCR + 0x0250)
#define CSEQ_HQ_DONE_PASS (CMAPPEDSCR + 0x0254)
/* Mode independent scratch page 4 macros. */
#define CSEQ_Q_EXE_HEAD (CMAPPEDSCR + 0x0280)
#define CSEQ_Q_EXE_TAIL (CMAPPEDSCR + 0x0282)
#define CSEQ_Q_DONE_HEAD (CMAPPEDSCR + 0x0284)
#define CSEQ_Q_DONE_TAIL (CMAPPEDSCR + 0x0286)
#define CSEQ_Q_SEND_HEAD (CMAPPEDSCR + 0x0288)
#define CSEQ_Q_SEND_TAIL (CMAPPEDSCR + 0x028A)
#define CSEQ_Q_DMA2CHIM_HEAD (CMAPPEDSCR + 0x028C)
#define CSEQ_Q_DMA2CHIM_TAIL (CMAPPEDSCR + 0x028E)
#define CSEQ_Q_COPY_HEAD (CMAPPEDSCR + 0x0290)
#define CSEQ_Q_COPY_TAIL (CMAPPEDSCR + 0x0292)
#define CSEQ_REG0 (CMAPPEDSCR + 0x0294)
#define CSEQ_REG1 (CMAPPEDSCR + 0x0296)
#define CSEQ_REG2 (CMAPPEDSCR + 0x0298)
#define CSEQ_LINK_CTL_Q_MAP (CMAPPEDSCR + 0x029C)
#define CSEQ_MAX_CSEQ_MODE (CMAPPEDSCR + 0x029D)
#define CSEQ_FREE_LIST_HACK_COUNT (CMAPPEDSCR + 0x029E)
/* Mode independent scratch page 5 macros. */
#define CSEQ_EST_NEXUS_REQ_QUEUE (CMAPPEDSCR + 0x02A0)
#define CSEQ_EST_NEXUS_REQ_COUNT (CMAPPEDSCR + 0x02A8)
#define CSEQ_Q_EST_NEXUS_HEAD (CMAPPEDSCR + 0x02B0)
#define CSEQ_Q_EST_NEXUS_TAIL (CMAPPEDSCR + 0x02B2)
#define CSEQ_NEED_EST_NEXUS_SCB (CMAPPEDSCR + 0x02B4)
#define CSEQ_EST_NEXUS_REQ_HEAD (CMAPPEDSCR + 0x02B6)
#define CSEQ_EST_NEXUS_REQ_TAIL (CMAPPEDSCR + 0x02B7)
#define CSEQ_EST_NEXUS_SCB_OFFSET (CMAPPEDSCR + 0x02B8)
/* Mode independent scratch page 6 macros. */
#define CSEQ_INT_ROUT_RET_ADDR0 (CMAPPEDSCR + 0x02C0)
#define CSEQ_INT_ROUT_RET_ADDR1 (CMAPPEDSCR + 0x02C2)
#define CSEQ_INT_ROUT_SCBPTR (CMAPPEDSCR + 0x02C4)
#define CSEQ_INT_ROUT_MODE (CMAPPEDSCR + 0x02C6)
#define CSEQ_ISR_SCRATCH_FLAGS (CMAPPEDSCR + 0x02C7)
#define CSEQ_ISR_SAVE_SINDEX (CMAPPEDSCR + 0x02C8)
#define CSEQ_ISR_SAVE_DINDEX (CMAPPEDSCR + 0x02CA)
#define CSEQ_Q_MONIRTT_HEAD (CMAPPEDSCR + 0x02D0)
#define CSEQ_Q_MONIRTT_TAIL (CMAPPEDSCR + 0x02D2)
#define CSEQ_FREE_SCB_MASK (CMAPPEDSCR + 0x02D5)
#define CSEQ_BUILTIN_FREE_SCB_HEAD (CMAPPEDSCR + 0x02D6)
#define CSEQ_BUILTIN_FREE_SCB_TAIL (CMAPPEDSCR + 0x02D8)
#define CSEQ_EXTENDED_FREE_SCB_HEAD (CMAPPEDSCR + 0x02DA)
#define CSEQ_EXTENDED_FREE_SCB_TAIL (CMAPPEDSCR + 0x02DC)
/* Mode independent scratch page 7 macros. */
#define CSEQ_EMPTY_REQ_QUEUE (CMAPPEDSCR + 0x02E0)
#define CSEQ_EMPTY_REQ_COUNT (CMAPPEDSCR + 0x02E8)
#define CSEQ_Q_EMPTY_HEAD (CMAPPEDSCR + 0x02F0)
#define CSEQ_Q_EMPTY_TAIL (CMAPPEDSCR + 0x02F2)
#define CSEQ_NEED_EMPTY_SCB (CMAPPEDSCR + 0x02F4)
#define CSEQ_EMPTY_REQ_HEAD (CMAPPEDSCR + 0x02F6)
#define CSEQ_EMPTY_REQ_TAIL (CMAPPEDSCR + 0x02F7)
#define CSEQ_EMPTY_SCB_OFFSET (CMAPPEDSCR + 0x02F8)
#define CSEQ_PRIMITIVE_DATA (CMAPPEDSCR + 0x02FA)
#define CSEQ_TIMEOUT_CONST (CMAPPEDSCR + 0x02FC)
/***************************************************************************
* Link m Sequencer scratch RAM is 512 bytes.
* This scratch memory is divided into mode dependent and mode
* independent scratch with this memory further subdivided into
* pages of size 32 bytes. There are 4 pages (128 bytes) of
* mode independent scratch and 4 pages of dependent scratch
* memory for modes 0-2 (384 bytes).
*
* The host accesses this scratch in a different manner from the
* link sequencer. The sequencer has to use LSEQ registers
* LmSCRPAGE and LmMnSCRPAGE to access the scratch memory. A flat
* mapping of the scratch memory is avaliable for software
* convenience and to prevent corruption while the sequencer is
* running. This memory is mapped onto addresses 800h - 9FFh.
*
* These addresses are mapped as follows:
*
* 800h-85Fh Mode Dependent Scratch Mode 0 Pages 0-2
* 860h-87Fh Mode Dependent Scratch Mode 0 Page 3
* Mode Dependent Scratch Mode 5 Page 0
* 880h-8DFh Mode Dependent Scratch Mode 1 Pages 0-2
* 8E0h-8FFh Mode Dependent Scratch Mode 1 Page 3
* Mode Dependent Scratch Mode 5 Page 1
* 900h-95Fh Mode Dependent Scratch Mode 2 Pages 0-2
* 960h-97Fh Mode Dependent Scratch Mode 2 Page 3
* Mode Dependent Scratch Mode 5 Page 2
* 980h-9DFh Mode Independent Scratch Pages 0-3
* 9E0h-9FFh Mode Independent Scratch Page 3
* Mode Dependent Scratch Mode 5 Page 3
*
****************************************************************************/
/* General macros */
#define LSEQ_MODE_SCRATCH_SIZE 0x80 /* Size of scratch RAM per mode */
#define LSEQ_PAGE_SIZE 0x20 /* Scratch page size (in bytes) */
#define LSEQ_MODE5_PAGE0_OFFSET 0x60
/* Common mode dependent scratch page 0 macros for modes 0,1,2, and 5 */
/* Indexed using LSEQ_MODE_SCRATCH_SIZE * mode, for modes 0,1,2. */
#define LmSEQ_RET_ADDR(LinkNum) (LmSCRATCH(LinkNum) + 0x0000)
#define LmSEQ_REG0_MODE(LinkNum) (LmSCRATCH(LinkNum) + 0x0002)
#define LmSEQ_MODE_FLAGS(LinkNum) (LmSCRATCH(LinkNum) + 0x0004)
/* Mode flag macros (byte 0) */
#define SAS_SAVECTX_OCCURRED 0x80
#define SAS_OOBSVC_OCCURRED 0x40
#define SAS_OOB_DEVICE_PRESENT 0x20
#define SAS_CFGHDR_OCCURRED 0x10
#define SAS_RCV_INTS_ARE_DISABLED 0x08
#define SAS_OOB_HOT_PLUG_CNCT 0x04
#define SAS_AWAIT_OPEN_CONNECTION 0x02
#define SAS_CFGCMPLT_OCCURRED 0x01
/* Mode flag macros (byte 1) */
#define SAS_RLSSCB_OCCURRED 0x80
#define SAS_FORCED_HEADER_MISS 0x40
#define LmSEQ_RET_ADDR2(LinkNum) (LmSCRATCH(LinkNum) + 0x0006)
#define LmSEQ_RET_ADDR1(LinkNum) (LmSCRATCH(LinkNum) + 0x0008)
#define LmSEQ_OPCODE_TO_CSEQ(LinkNum) (LmSCRATCH(LinkNum) + 0x000B)
#define LmSEQ_DATA_TO_CSEQ(LinkNum) (LmSCRATCH(LinkNum) + 0x000C)
/* Mode dependent scratch page 0 macros for mode 0 (non-common) */
/* Absolute offsets */
#define LmSEQ_FIRST_INV_DDB_SITE(LinkNum) (LmSCRATCH(LinkNum) + 0x000E)
#define LmSEQ_EMPTY_TRANS_CTX(LinkNum) (LmSCRATCH(LinkNum) + 0x0010)
#define LmSEQ_RESP_LEN(LinkNum) (LmSCRATCH(LinkNum) + 0x0012)
#define LmSEQ_FIRST_INV_SCB_SITE(LinkNum) (LmSCRATCH(LinkNum) + 0x0014)
#define LmSEQ_INTEN_SAVE(LinkNum) (LmSCRATCH(LinkNum) + 0x0016)
#define LmSEQ_LINK_RST_FRM_LEN(LinkNum) (LmSCRATCH(LinkNum) + 0x001A)
#define LmSEQ_LINK_RST_PROTOCOL(LinkNum) (LmSCRATCH(LinkNum) + 0x001B)
#define LmSEQ_RESP_STATUS(LinkNum) (LmSCRATCH(LinkNum) + 0x001C)
#define LmSEQ_LAST_LOADED_SGE(LinkNum) (LmSCRATCH(LinkNum) + 0x001D)
#define LmSEQ_SAVE_SCBPTR(LinkNum) (LmSCRATCH(LinkNum) + 0x001E)
/* Mode dependent scratch page 0 macros for mode 1 (non-common) */
/* Absolute offsets */
#define LmSEQ_Q_XMIT_HEAD(LinkNum) (LmSCRATCH(LinkNum) + 0x008E)
#define LmSEQ_M1_EMPTY_TRANS_CTX(LinkNum) (LmSCRATCH(LinkNum) + 0x0090)
#define LmSEQ_INI_CONN_TAG(LinkNum) (LmSCRATCH(LinkNum) + 0x0092)
#define LmSEQ_FAILED_OPEN_STATUS(LinkNum) (LmSCRATCH(LinkNum) + 0x009A)
#define LmSEQ_XMIT_REQUEST_TYPE(LinkNum) (LmSCRATCH(LinkNum) + 0x009B)
#define LmSEQ_M1_RESP_STATUS(LinkNum) (LmSCRATCH(LinkNum) + 0x009C)
#define LmSEQ_M1_LAST_LOADED_SGE(LinkNum) (LmSCRATCH(LinkNum) + 0x009D)
#define LmSEQ_M1_SAVE_SCBPTR(LinkNum) (LmSCRATCH(LinkNum) + 0x009E)
/* Mode dependent scratch page 0 macros for mode 2 (non-common) */
#define LmSEQ_PORT_COUNTER(LinkNum) (LmSCRATCH(LinkNum) + 0x010E)
#define LmSEQ_PM_TABLE_PTR(LinkNum) (LmSCRATCH(LinkNum) + 0x0110)
#define LmSEQ_SATA_INTERLOCK_TMR_SAVE(LinkNum) (LmSCRATCH(LinkNum) + 0x0112)
#define LmSEQ_IP_BITL(LinkNum) (LmSCRATCH(LinkNum) + 0x0114)
#define LmSEQ_COPY_SMP_CONN_TAG(LinkNum) (LmSCRATCH(LinkNum) + 0x0116)
#define LmSEQ_P0M2_OFFS1AH(LinkNum) (LmSCRATCH(LinkNum) + 0x011A)
/* Mode dependent scratch page 0 macros for modes 4/5 (non-common) */
/* Absolute offsets */
#define LmSEQ_SAVED_OOB_STATUS(LinkNum) (LmSCRATCH(LinkNum) + 0x006E)
#define LmSEQ_SAVED_OOB_MODE(LinkNum) (LmSCRATCH(LinkNum) + 0x006F)
#define LmSEQ_Q_LINK_HEAD(LinkNum) (LmSCRATCH(LinkNum) + 0x0070)
#define LmSEQ_LINK_RST_ERR(LinkNum) (LmSCRATCH(LinkNum) + 0x0072)
#define LmSEQ_SAVED_OOB_SIGNALS(LinkNum) (LmSCRATCH(LinkNum) + 0x0073)
#define LmSEQ_SAS_RESET_MODE(LinkNum) (LmSCRATCH(LinkNum) + 0x0074)
#define LmSEQ_LINK_RESET_RETRY_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x0075)
#define LmSEQ_NUM_LINK_RESET_RETRIES(LinkNum) (LmSCRATCH(LinkNum) + 0x0076)
#define LmSEQ_OOB_INT_ENABLES(LinkNum) (LmSCRATCH(LinkNum) + 0x0078)
#define LmSEQ_NOTIFY_TIMER_DOWN_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x007A)
#define LmSEQ_NOTIFY_TIMER_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x007C)
#define LmSEQ_NOTIFY_TIMER_INITIAL_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x007E)
/* Mode dependent scratch page 1, mode 0 and mode 1 */
#define LmSEQ_SG_LIST_PTR_ADDR0(LinkNum) (LmSCRATCH(LinkNum) + 0x0020)
#define LmSEQ_SG_LIST_PTR_ADDR1(LinkNum) (LmSCRATCH(LinkNum) + 0x0030)
#define LmSEQ_M1_SG_LIST_PTR_ADDR0(LinkNum) (LmSCRATCH(LinkNum) + 0x00A0)
#define LmSEQ_M1_SG_LIST_PTR_ADDR1(LinkNum) (LmSCRATCH(LinkNum) + 0x00B0)
/* Mode dependent scratch page 1 macros for mode 2 */
/* Absolute offsets */
#define LmSEQ_INVALID_DWORD_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x0120)
#define LmSEQ_DISPARITY_ERROR_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x0124)
#define LmSEQ_LOSS_OF_SYNC_COUNT(LinkNum) (LmSCRATCH(LinkNum) + 0x0128)
/* Mode dependent scratch page 1 macros for mode 4/5 */
#define LmSEQ_FRAME_TYPE_MASK(LinkNum) (LmSCRATCH(LinkNum) + 0x00E0)
#define LmSEQ_HASHED_DEST_ADDR_MASK(LinkNum) (LmSCRATCH(LinkNum) + 0x00E1)
#define LmSEQ_HASHED_SRC_ADDR_MASK_PRINT(LinkNum) (LmSCRATCH(LinkNum) + 0x00E4)
#define LmSEQ_HASHED_SRC_ADDR_MASK(LinkNum) (LmSCRATCH(LinkNum) + 0x00E5)
#define LmSEQ_NUM_FILL_BYTES_MASK(LinkNum) (LmSCRATCH(LinkNum) + 0x00EB)
#define LmSEQ_TAG_MASK(LinkNum) (LmSCRATCH(LinkNum) + 0x00F0)
#define LmSEQ_TARGET_PORT_XFER_TAG(LinkNum) (LmSCRATCH(LinkNum) + 0x00F2)
#define LmSEQ_DATA_OFFSET(LinkNum) (LmSCRATCH(LinkNum) + 0x00F4)
/* Mode dependent scratch page 2 macros for mode 0 */
/* Absolute offsets */
#define LmSEQ_SMP_RCV_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0040)
#define LmSEQ_DEVICE_BITS(LinkNum) (LmSCRATCH(LinkNum) + 0x005B)
#define LmSEQ_SDB_DDB(LinkNum) (LmSCRATCH(LinkNum) + 0x005C)
#define LmSEQ_SDB_NUM_TAGS(LinkNum) (LmSCRATCH(LinkNum) + 0x005E)
#define LmSEQ_SDB_CURR_TAG(LinkNum) (LmSCRATCH(LinkNum) + 0x005F)
/* Mode dependent scratch page 2 macros for mode 1 */
/* Absolute offsets */
/* byte 0 bits 1-0 are domain select. */
#define LmSEQ_TX_ID_ADDR_FRAME(LinkNum) (LmSCRATCH(LinkNum) + 0x00C0)
#define LmSEQ_OPEN_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x00C8)
#define LmSEQ_SRST_AS_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x00CC)
#define LmSEQ_LAST_LOADED_SG_EL(LinkNum) (LmSCRATCH(LinkNum) + 0x00D4)
/* Mode dependent scratch page 2 macros for mode 2 */
/* Absolute offsets */
#define LmSEQ_STP_SHUTDOWN_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0140)
#define LmSEQ_CLOSE_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0144)
#define LmSEQ_BREAK_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0148)
#define LmSEQ_DWS_RESET_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x014C)
#define LmSEQ_SATA_INTERLOCK_TIMER_TERM_TS(LinkNum) \
(LmSCRATCH(LinkNum) + 0x0150)
#define LmSEQ_MCTL_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0154)
/* Mode dependent scratch page 2 macros for mode 5 */
#define LmSEQ_COMINIT_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0160)
#define LmSEQ_RCV_ID_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0164)
#define LmSEQ_RCV_FIS_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x0168)
#define LmSEQ_DEV_PRES_TIMER_TERM_TS(LinkNum) (LmSCRATCH(LinkNum) + 0x016C)
/* Mode dependent scratch page 3 macros for modes 0 and 1 */
/* None defined */
/* Mode dependent scratch page 3 macros for modes 2 and 5 */
/* None defined */
/* Mode Independent Scratch page 0 macros. */
#define LmSEQ_Q_TGTXFR_HEAD(LinkNum) (LmSCRATCH(LinkNum) + 0x0180)
#define LmSEQ_Q_TGTXFR_TAIL(LinkNum) (LmSCRATCH(LinkNum) + 0x0182)
#define LmSEQ_LINK_NUMBER(LinkNum) (LmSCRATCH(LinkNum) + 0x0186)
#define LmSEQ_SCRATCH_FLAGS(LinkNum) (LmSCRATCH(LinkNum) + 0x0187)
/*
* Currently only bit 0, SAS_DWSAQD, is used.
*/
#define SAS_DWSAQD 0x01 /*
* DWSSTATUS: DWSAQD
* bit las read in ISR.
*/
#define LmSEQ_CONNECTION_STATE(LinkNum) (LmSCRATCH(LinkNum) + 0x0188)
/* Connection states (byte 0) */
#define SAS_WE_OPENED_CS 0x01
#define SAS_DEVICE_OPENED_CS 0x02
#define SAS_WE_SENT_DONE_CS 0x04
#define SAS_DEVICE_SENT_DONE_CS 0x08
#define SAS_WE_SENT_CLOSE_CS 0x10
#define SAS_DEVICE_SENT_CLOSE_CS 0x20
#define SAS_WE_SENT_BREAK_CS 0x40
#define SAS_DEVICE_SENT_BREAK_CS 0x80
/* Connection states (byte 1) */
#define SAS_OPN_TIMEOUT_OR_OPN_RJCT_CS 0x01
#define SAS_AIP_RECEIVED_CS 0x02
#define SAS_CREDIT_TIMEOUT_OCCURRED_CS 0x04
#define SAS_ACKNAK_TIMEOUT_OCCURRED_CS 0x08
#define SAS_SMPRSP_TIMEOUT_OCCURRED_CS 0x10
#define SAS_DONE_TIMEOUT_OCCURRED_CS 0x20
/* Connection states (byte 2) */
#define SAS_SMP_RESPONSE_RECEIVED_CS 0x01
#define SAS_INTLK_TIMEOUT_OCCURRED_CS 0x02
#define SAS_DEVICE_SENT_DMAT_CS 0x04
#define SAS_DEVICE_SENT_SYNCSRST_CS 0x08
#define SAS_CLEARING_AFFILIATION_CS 0x20
#define SAS_RXTASK_ACTIVE_CS 0x40
#define SAS_TXTASK_ACTIVE_CS 0x80
/* Connection states (byte 3) */
#define SAS_PHY_LOSS_OF_SIGNAL_CS 0x01
#define SAS_DWS_TIMER_EXPIRED_CS 0x02
#define SAS_LINK_RESET_NOT_COMPLETE_CS 0x04
#define SAS_PHY_DISABLED_CS 0x08
#define SAS_LINK_CTL_TASK_ACTIVE_CS 0x10
#define SAS_PHY_EVENT_TASK_ACTIVE_CS 0x20
#define SAS_DEVICE_SENT_ID_FRAME_CS 0x40
#define SAS_DEVICE_SENT_REG_FIS_CS 0x40
#define SAS_DEVICE_SENT_HARD_RESET_CS 0x80
#define SAS_PHY_IS_DOWN_FLAGS (SAS_PHY_LOSS_OF_SIGNAL_CS|\
SAS_DWS_TIMER_EXPIRED_CS |\
SAS_LINK_RESET_NOT_COMPLETE_CS|\
SAS_PHY_DISABLED_CS)
#define SAS_LINK_CTL_PHY_EVENT_FLAGS (SAS_LINK_CTL_TASK_ACTIVE_CS |\
SAS_PHY_EVENT_TASK_ACTIVE_CS |\
SAS_DEVICE_SENT_ID_FRAME_CS |\
SAS_DEVICE_SENT_HARD_RESET_CS)
#define LmSEQ_CONCTL(LinkNum) (LmSCRATCH(LinkNum) + 0x018C)
#define LmSEQ_CONSTAT(LinkNum) (LmSCRATCH(LinkNum) + 0x018E)
#define LmSEQ_CONNECTION_MODES(LinkNum) (LmSCRATCH(LinkNum) + 0x018F)
#define LmSEQ_REG1_ISR(LinkNum) (LmSCRATCH(LinkNum) + 0x0192)
#define LmSEQ_REG2_ISR(LinkNum) (LmSCRATCH(LinkNum) + 0x0194)
#define LmSEQ_REG3_ISR(LinkNum) (LmSCRATCH(LinkNum) + 0x0196)
#define LmSEQ_REG0_ISR(LinkNum) (LmSCRATCH(LinkNum) + 0x0198)
/* Mode independent scratch page 1 macros. */
#define LmSEQ_EST_NEXUS_SCBPTR0(LinkNum) (LmSCRATCH(LinkNum) + 0x01A0)
#define LmSEQ_EST_NEXUS_SCBPTR1(LinkNum) (LmSCRATCH(LinkNum) + 0x01A2)
#define LmSEQ_EST_NEXUS_SCBPTR2(LinkNum) (LmSCRATCH(LinkNum) + 0x01A4)
#define LmSEQ_EST_NEXUS_SCBPTR3(LinkNum) (LmSCRATCH(LinkNum) + 0x01A6)
#define LmSEQ_EST_NEXUS_SCB_OPCODE0(LinkNum) (LmSCRATCH(LinkNum) + 0x01A8)
#define LmSEQ_EST_NEXUS_SCB_OPCODE1(LinkNum) (LmSCRATCH(LinkNum) + 0x01A9)
#define LmSEQ_EST_NEXUS_SCB_OPCODE2(LinkNum) (LmSCRATCH(LinkNum) + 0x01AA)
#define LmSEQ_EST_NEXUS_SCB_OPCODE3(LinkNum) (LmSCRATCH(LinkNum) + 0x01AB)
#define LmSEQ_EST_NEXUS_SCB_HEAD(LinkNum) (LmSCRATCH(LinkNum) + 0x01AC)
#define LmSEQ_EST_NEXUS_SCB_TAIL(LinkNum) (LmSCRATCH(LinkNum) + 0x01AD)
#define LmSEQ_EST_NEXUS_BUF_AVAIL(LinkNum) (LmSCRATCH(LinkNum) + 0x01AE)
#define LmSEQ_TIMEOUT_CONST(LinkNum) (LmSCRATCH(LinkNum) + 0x01B8)
#define LmSEQ_ISR_SAVE_SINDEX(LinkNum) (LmSCRATCH(LinkNum) + 0x01BC)
#define LmSEQ_ISR_SAVE_DINDEX(LinkNum) (LmSCRATCH(LinkNum) + 0x01BE)
/* Mode independent scratch page 2 macros. */
#define LmSEQ_EMPTY_SCB_PTR0(LinkNum) (LmSCRATCH(LinkNum) + 0x01C0)
#define LmSEQ_EMPTY_SCB_PTR1(LinkNum) (LmSCRATCH(LinkNum) + 0x01C2)
#define LmSEQ_EMPTY_SCB_PTR2(LinkNum) (LmSCRATCH(LinkNum) + 0x01C4)
#define LmSEQ_EMPTY_SCB_PTR3(LinkNum) (LmSCRATCH(LinkNum) + 0x01C6)
#define LmSEQ_EMPTY_SCB_OPCD0(LinkNum) (LmSCRATCH(LinkNum) + 0x01C8)
#define LmSEQ_EMPTY_SCB_OPCD1(LinkNum) (LmSCRATCH(LinkNum) + 0x01C9)
#define LmSEQ_EMPTY_SCB_OPCD2(LinkNum) (LmSCRATCH(LinkNum) + 0x01CA)
#define LmSEQ_EMPTY_SCB_OPCD3(LinkNum) (LmSCRATCH(LinkNum) + 0x01CB)
#define LmSEQ_EMPTY_SCB_HEAD(LinkNum) (LmSCRATCH(LinkNum) + 0x01CC)
#define LmSEQ_EMPTY_SCB_TAIL(LinkNum) (LmSCRATCH(LinkNum) + 0x01CD)
#define LmSEQ_EMPTY_BUFS_AVAIL(LinkNum) (LmSCRATCH(LinkNum) + 0x01CE)
#define LmSEQ_ATA_SCR_REGS(LinkNum) (LmSCRATCH(LinkNum) + 0x01D4)
/* Mode independent scratch page 3 macros. */
#define LmSEQ_DEV_PRES_TMR_TOUT_CONST(LinkNum) (LmSCRATCH(LinkNum) + 0x01E0)
#define LmSEQ_SATA_INTERLOCK_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01E4)
#define LmSEQ_STP_SHUTDOWN_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01E8)
#define LmSEQ_SRST_ASSERT_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01EC)
#define LmSEQ_RCV_FIS_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01F0)
#define LmSEQ_ONE_MILLISEC_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01F4)
#define LmSEQ_TEN_MS_COMINIT_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01F8)
#define LmSEQ_SMP_RCV_TIMEOUT(LinkNum) (LmSCRATCH(LinkNum) + 0x01FC)
#endif