satip-axe/kernel/drivers/stm/stx7108_hispeed.c
2015-03-26 17:24:57 +01:00

1406 lines
41 KiB
C

/*
* (c) 2010 STMicroelectronics Limited
*
* Author: Pawel Moll <pawel.moll@st.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ethtool.h>
#include <linux/dma-mapping.h>
#include <linux/phy.h>
#include <linux/stm/miphy.h>
#include <linux/stm/device.h>
#include <linux/stm/sysconf.h>
#include <linux/stm/emi.h>
#include <linux/stm/stx7108.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <asm/irq-ilc.h>
/* --------------------------------------------------------------------
* Ethernet MAC resources (PAD and Retiming)
* --------------------------------------------------------------------*/
#undef DEBUG_RETIME_CONF
/* Turn-on to only debug retiming setting for example on eth driver */
/*#define DEBUG_RETIME_CONF*/
#define ETH_MDIO_BIDIR(_gmac, _port, _pin, _retiming) \
{ \
.gpio = stm_gpio(_port, _pin), \
.direction = stm_pad_gpio_direction_custom, \
.function = 1 + _gmac, \
.priv = &(struct stx7108_pio_config) { \
.retime = &_retiming, \
.mode = &(struct stx7108_pio_mode_config) { \
.oe = 0, \
.pu = 1, \
.od = 0, \
}, \
}, \
}
static void stx7108_pio_dump_pad_config(const char *name, int port,
struct stm_pad_config *pad_config)
{
#ifdef DEBUG_RETIME_CONF
int i, gpios_num = pad_config->gpios_num;
pr_info("%s port=%d, gpios_num = %d\n", name, port, gpios_num);
pr_info("GPIO (retime\tclk1notclk0\tclknotdata\tdouble_edge\t"
"invertclk\tdelay_input)\n");
for (i = 0; i < gpios_num; i++) {
struct stm_pad_gpio *pad_gpio = &pad_config->gpios[i];
struct stx7108_pio_config *priv = pad_gpio->priv;
struct stx7108_pio_retime_config *retime = priv->retime;
pr_info("PIO%d[%d] %d\t\t%d\t\t%d\t%d\t\t%d\t\t%d\n",
stm_gpio_port(pad_gpio->gpio),
stm_gpio_pin(pad_gpio->gpio),
retime->retime, retime->clk1notclk0,
retime->clknotdata, retime->double_edge,
retime->invertclk, retime->delay_input);
}
#endif
}
/* MII Default Retiming Configuration */
static struct stx7108_pio_retime_config mii_retime_bypass = {
.retime = 0,
.clk1notclk0 = -1,
.clknotdata = 0,
.double_edge = -1,
.invertclk = -1,
.delay_input = -1,
};
static struct stx7108_pio_retime_config mii_retime_clock[] = {
[0] = {
.retime = -1,
.clk1notclk0 = 0,
.clknotdata = 1,
.double_edge = -1,
.invertclk = -1,
.delay_input = -1,
},
[1] = {
.retime = -1,
.clk1notclk0 = 1,
.clknotdata = 1,
.double_edge = -1,
.invertclk = -1,
.delay_input = -1,
}
};
static struct stx7108_pio_retime_config mii_retime_phy_clock = {
.retime = -1,
.clk1notclk0 = 0,
.clknotdata = 1,
.double_edge = -1,
.invertclk = -1,
.delay_input = -1,
};
static struct stx7108_pio_retime_config mii_retime_data[] = {
[0] = {
.retime = 1,
.clk1notclk0 = 0,
.clknotdata = 0,
.double_edge = -1,
.invertclk = -1,
.delay_input = -1,
},
[1] = {
.retime = 1,
.clk1notclk0 = 1,
.clknotdata = 0,
.double_edge = -1,
.invertclk = -1,
.delay_input = -1,
}
};
/* RMII Default Retiming Configuration */
static struct stx7108_pio_retime_config rmii_retime_data[] = {
[0] = {
.retime = 1,
.clk1notclk0 = 0,
.clknotdata = 0,
.double_edge = -1,
.invertclk = -1,
.delay_input = -1,
},
[1] = {
.retime = 1,
.clk1notclk0 = 0,
.clknotdata = 0,
.double_edge = -1,
.invertclk = -1,
.delay_input = -1,
}
};
/* GMII (GTX) Default Retiming Configuration */
static struct stx7108_pio_retime_config gmii_gtx_retime_clock = {
.retime = 1,
.clk1notclk0 = 1,
.clknotdata = 1,
.double_edge = 0,
.invertclk = -1,
.delay_input = 1,
};
/* RGMII (GTX) Default Retiming Configuration */
static struct stx7108_pio_retime_config rgmii_retime_bypass = {
.retime = 0,
.clk1notclk0 = -1,
.clknotdata = 0,
.double_edge = 1,
.invertclk = -1,
.delay_input = 0,
};
static struct stx7108_pio_retime_config rgmii_retime_clock[] = {
[0] = {
.retime = -1,
.clk1notclk0 = 0,
.clknotdata = 1,
.double_edge = 1,
.invertclk = -1,
.delay_input = 0,
},
[1] = {
.retime = -1,
.clk1notclk0 = 1,
.clknotdata = 1,
.double_edge = 1,
.invertclk = -1,
.delay_input = 0,
}
};
static struct stx7108_pio_retime_config rgmii_gtx_retime_clock = {
.retime = 1,
.clk1notclk0 = 1,
.clknotdata = 1,
.double_edge = 1,
.invertclk = -1,
.delay_input = 0,
};
static struct stx7108_pio_retime_config rgmii_retime_data[] = {
[0] = {
.retime = 1,
.clk1notclk0 = 0,
.clknotdata = 0,
.double_edge = 1,
.invertclk = -1,
.delay_input = 0,
},
[1] = {
.retime = 1,
.clk1notclk0 = 1,
.clknotdata = 0,
.double_edge = 1,
.invertclk = -1,
.delay_input = 0,
}
};
#define DATA_IN(_gmac, _port, _pin, _retiming) \
{ \
.gpio = stm_gpio(_port, _pin), \
.direction = stm_pad_gpio_direction_in, \
.function = _gmac + 1, \
.priv = &(struct stx7108_pio_config) { \
.retime = &_retiming[_gmac], \
}, \
}
#define DATA_OUT(_gmac, _port, _pin, _retiming) \
{ \
.gpio = stm_gpio(_port, _pin), \
.direction = stm_pad_gpio_direction_out, \
.function = _gmac + 1, \
.priv = &(struct stx7108_pio_config) { \
.retime = &_retiming[_gmac], \
}, \
}
#define CLOCK_IN(_gmac, _port, _pin, _retiming) \
{ \
.gpio = stm_gpio(_port, _pin), \
.direction = stm_pad_gpio_direction_in, \
.function = _gmac + 1, \
.priv = &(struct stx7108_pio_config) { \
.retime = &_retiming[_gmac], \
}, \
}
#define CLOCK_OUT(_gmac, _port, _pin, _retiming) \
{ \
.gpio = stm_gpio(_port, _pin), \
.direction = stm_pad_gpio_direction_out, \
.function = _gmac + 1, \
.priv = &(struct stx7108_pio_config) { \
.retime = &_retiming[_gmac], \
}, \
}
#define BYPASS_IN(_gmac, _port, _pin, _retiming) \
{ \
.gpio = stm_gpio(_port, _pin), \
.direction = stm_pad_gpio_direction_in, \
.function = _gmac + 1, \
.priv = &(struct stx7108_pio_config) { \
.retime = &_retiming, \
}, \
}
#define BYPASS_OUT(_gmac, _port, _pin, _retiming) \
{ \
.gpio = stm_gpio(_port, _pin), \
.direction = stm_pad_gpio_direction_out, \
.function = _gmac + 1, \
.priv = &(struct stx7108_pio_config) { \
.retime = &_retiming, \
}, \
}
#define PHY_CLOCK(_gmac, _port, _pin, _retiming) \
{ \
.gpio = stm_gpio(_port, _pin), \
.direction = stm_pad_gpio_direction_unknown, \
.name = "PHYCLK", \
.priv = &(struct stx7108_pio_config) { \
.retime = &_retiming, \
}, \
}
static struct stm_pad_config stx7108_ethernet_mii_pad_configs[] = {
[0] = {
.gpios_num = 20,
.gpios = (struct stm_pad_gpio []) {
DATA_OUT(0, 6, 0, mii_retime_data), /* TXD[0] */
DATA_OUT(0, 6, 1, mii_retime_data), /* TXD[1] */
DATA_OUT(0, 6, 2, mii_retime_data), /* TXD[2] */
DATA_OUT(0, 6, 3, mii_retime_data), /* TXD[3] */
DATA_OUT(0, 7, 0, mii_retime_data), /* TXER */
DATA_OUT(0, 7, 1, mii_retime_data), /* TXEN */
CLOCK_IN(0, 7, 2, mii_retime_clock), /* TXCLK */
BYPASS_IN(0, 7, 3, mii_retime_bypass), /* COL */
BYPASS_OUT(0, 7, 4, mii_retime_bypass), /* MDIO*/
CLOCK_OUT(0, 7, 5, mii_retime_clock), /* MDC */
BYPASS_IN(0, 7, 6, mii_retime_bypass), /* CRS */
BYPASS_IN(0, 7, 7, mii_retime_bypass), /* MDINT */
DATA_IN(0, 8, 0, mii_retime_data), /* RXD[0] */
DATA_IN(0, 8, 1, mii_retime_data), /* RXD[1] */
DATA_IN(0, 8, 2, mii_retime_data), /* RXD[2] */
DATA_IN(0, 8, 3, mii_retime_data), /* RXD[3] */
DATA_IN(0, 9, 0, mii_retime_data), /* RXDV */
DATA_IN(0, 9, 1, mii_retime_data), /* RX_ER */
CLOCK_IN(0, 9, 2, mii_retime_clock), /* RXCLK */
PHY_CLOCK(0, 9, 3, mii_retime_phy_clock),/* PHYCLK */
},
.sysconfs_num = 3,
.sysconfs = (struct stm_pad_sysconf []) {
/* EN_GMAC0 */
STM_PAD_SYS_CFG_BANK(2, 53, 0, 0, 1),
/* MIIx_PHY_SEL */
STM_PAD_SYS_CFG_BANK(2, 27, 2, 4, 0),
/* ENMIIx */
STM_PAD_SYS_CFG_BANK(2, 27, 5, 5, 1),
},
},
[1] = {
.gpios_num = 20,
.gpios = (struct stm_pad_gpio []) {
PHY_CLOCK(1, 15, 5, mii_retime_phy_clock),/* PHYCLK */
BYPASS_IN(1, 15, 6, mii_retime_bypass), /* MDINT */
DATA_OUT(1, 15, 7, mii_retime_data), /* TXEN */
DATA_OUT(1, 16, 0, mii_retime_data), /* TXD[0] */
DATA_OUT(1, 16, 1, mii_retime_data), /* TXD[1] */
DATA_OUT(1, 16, 2, mii_retime_data), /* TXD[2] */
DATA_OUT(1, 16, 3, mii_retime_data), /* TXD[3] */
CLOCK_IN(1, 17, 0, mii_retime_clock), /* TXCLK */
DATA_OUT(1, 17, 1, mii_retime_data), /* TXER */
BYPASS_IN(1, 17, 2, mii_retime_bypass), /* CRS */
BYPASS_IN(1, 17, 3, mii_retime_bypass), /* COL */
BYPASS_OUT(1, 17, 4, mii_retime_bypass),/* MDIO */
CLOCK_OUT(1, 17, 5, mii_retime_clock), /* MDC */
DATA_IN(1, 17, 6, mii_retime_data), /* RXDV */
DATA_IN(1, 17, 7, mii_retime_data), /* RX_ER */
DATA_IN(1, 18, 0, mii_retime_data), /* RXD[0] */
DATA_IN(1, 18, 1, mii_retime_data), /* RXD[1] */
DATA_IN(1, 18, 2, mii_retime_data), /* RXD[2] */
DATA_IN(1, 18, 3, mii_retime_data), /* RXD[3] */
CLOCK_IN(1, 19, 0, mii_retime_clock), /* RXCLK */
},
.sysconfs_num = 3,
.sysconfs = (struct stm_pad_sysconf []) {
/* EN_GMAC1 */
STM_PAD_SYS_CFG_BANK(4, 67, 0, 0, 1),
/* MIIx_PHY_SEL */
STM_PAD_SYS_CFG_BANK(4, 23, 2, 4, 0),
/* ENMIIx */
STM_PAD_SYS_CFG_BANK(4, 23, 5, 5, 1),
},
},
};
static struct stm_pad_config stx7108_ethernet_gmii_pad_configs[] = {
[0] = {
.gpios_num = 28,
.gpios = (struct stm_pad_gpio []) {
DATA_OUT(0, 6, 0, mii_retime_data), /* TXD[0] */
DATA_OUT(0, 6, 1, mii_retime_data), /* TXD[1] */
DATA_OUT(0, 6, 2, mii_retime_data), /* TXD[2] */
DATA_OUT(0, 6, 3, mii_retime_data), /* TXD[3] */
DATA_OUT(0, 6, 4, mii_retime_data), /* TXD[4] */
DATA_OUT(0, 6, 5, mii_retime_data), /* TXD[5] */
DATA_OUT(0, 6, 6, mii_retime_data), /* TXD[6] */
DATA_OUT(0, 6, 7, mii_retime_data), /* TXD[7] */
DATA_OUT(0, 7, 0, mii_retime_data), /* TXER */
DATA_OUT(0, 7, 1, mii_retime_data), /* TXEN */
CLOCK_IN(0, 7, 2, mii_retime_clock), /* TXCLK */
BYPASS_IN(0, 7, 3, mii_retime_bypass), /* COL */
BYPASS_OUT(0, 7, 4, mii_retime_bypass), /* MDIO */
CLOCK_OUT(0, 7, 5, mii_retime_clock), /* MDC */
BYPASS_IN(0, 7, 6, mii_retime_bypass), /* CRS */
BYPASS_IN(0, 7, 7, mii_retime_bypass), /* MDINT */
DATA_IN(0, 8, 0, mii_retime_data), /* RXD[0] */
DATA_IN(0, 8, 1, mii_retime_data), /* RXD[1] */
DATA_IN(0, 8, 2, mii_retime_data), /* RXD[2] */
DATA_IN(0, 8, 3, mii_retime_data), /* RXD[3] */
DATA_IN(0, 8, 4, mii_retime_data), /* RXD[4] */
DATA_IN(0, 8, 5, mii_retime_data), /* RXD[5] */
DATA_IN(0, 8, 6, mii_retime_data), /* RXD[6] */
DATA_IN(0, 8, 7, mii_retime_data), /* RXD[7] */
DATA_IN(0, 9, 0, mii_retime_data), /* RXDV */
DATA_IN(0, 9, 1, mii_retime_data), /* RX_ER */
CLOCK_IN(0, 9, 2, mii_retime_clock), /* RXCLK */
PHY_CLOCK(0, 9, 3, gmii_gtx_retime_clock),/* PHYCLK */
},
.sysconfs_num = 3,
.sysconfs = (struct stm_pad_sysconf []) {
/* EN_GMAC0 */
STM_PAD_SYS_CFG_BANK(2, 53, 0, 0, 1),
/* MIIx_PHY_SEL */
STM_PAD_SYS_CFG_BANK(2, 27, 2, 4, 0),
/* ENMIIx */
STM_PAD_SYS_CFG_BANK(2, 27, 5, 5, 1),
},
},
[1] = {
.gpios_num = 28,
.gpios = (struct stm_pad_gpio []) {
PHY_CLOCK(1, 15, 5, gmii_gtx_retime_clock),/* PHYCLK */
BYPASS_IN(1, 15, 6, mii_retime_bypass), /* MDINT */
DATA_OUT(1, 15, 7, mii_retime_data), /* TXEN */
DATA_OUT(1, 16, 0, mii_retime_data), /* TXD[0] */
DATA_OUT(1, 16, 1, mii_retime_data), /* TXD[1] */
DATA_OUT(1, 16, 2, mii_retime_data), /* TXD[2] */
DATA_OUT(1, 16, 3, mii_retime_data), /* TXD[3] */
DATA_OUT(1, 16, 4, mii_retime_data), /* TXD[4] */
DATA_OUT(1, 16, 5, mii_retime_data), /* TXD[5] */
DATA_OUT(1, 16, 6, mii_retime_data), /* TXD[6] */
DATA_OUT(1, 16, 7, mii_retime_data), /* TXD[7] */
CLOCK_IN(1, 17, 0, mii_retime_clock), /* TXCLK */
DATA_OUT(1, 17, 1, mii_retime_data), /* TXER */
BYPASS_IN(1, 17, 2, mii_retime_bypass), /* CRS */
BYPASS_IN(1, 17, 3, mii_retime_bypass), /* COL */
BYPASS_OUT(1, 17, 4, mii_retime_bypass),/* MDIO */
CLOCK_OUT(1, 17, 5, mii_retime_clock), /* MDC */
DATA_IN(1, 17, 6, mii_retime_data), /* RXDV */
DATA_IN(1, 17, 7, mii_retime_data), /* RX_ER */
DATA_IN(1, 18, 0, mii_retime_data), /* RXD[0] */
DATA_IN(1, 18, 1, mii_retime_data), /* RXD[1] */
DATA_IN(1, 18, 2, mii_retime_data), /* RXD[2] */
DATA_IN(1, 18, 3, mii_retime_data), /* RXD[3] */
DATA_IN(1, 18, 4, mii_retime_data), /* RXD[4] */
DATA_IN(1, 18, 5, mii_retime_data), /* RXD[5] */
DATA_IN(1, 18, 6, mii_retime_data), /* RXD[6] */
DATA_IN(1, 18, 7, mii_retime_data), /* RXD[7] */
CLOCK_IN(1, 19, 0, mii_retime_clock), /* RXCLK */
},
.sysconfs_num = 3,
.sysconfs = (struct stm_pad_sysconf []) {
/* EN_GMAC1 */
STM_PAD_SYS_CFG_BANK(4, 67, 0, 0, 1),
/* MIIx_PHY_SEL */
STM_PAD_SYS_CFG_BANK(4, 23, 2, 4, 0),
/* ENMIIx */
STM_PAD_SYS_CFG_BANK(4, 23, 5, 5, 1),
},
},
};
static struct stm_pad_config stx7108_ethernet_rgmii_pad_configs[] = {
[0] = {
.gpios_num = 18,
.gpios = (struct stm_pad_gpio []) {
DATA_OUT(0, 6, 0, rgmii_retime_data), /* TXD[0] */
DATA_OUT(0, 6, 1, rgmii_retime_data), /* TXD[1] */
DATA_OUT(0, 6, 2, rgmii_retime_data), /* TXD[2] */
DATA_OUT(0, 6, 3, rgmii_retime_data), /* TXD[3] */
DATA_OUT(0, 7, 1, rgmii_retime_data), /* TXEN */
CLOCK_IN(0, 7, 2, rgmii_retime_clock), /* TXCLK */
BYPASS_IN(0, 7, 3, rgmii_retime_bypass),/* COL */
BYPASS_OUT(0, 7, 4, rgmii_retime_bypass),/* MDIO */
CLOCK_OUT(0, 7, 5, rgmii_retime_clock), /* MDC */
BYPASS_IN(0, 7, 6, rgmii_retime_bypass),/* CRS */
BYPASS_IN(0, 7, 7, rgmii_retime_bypass),/* MDINT */
DATA_IN(0, 8, 0, rgmii_retime_data), /* RXD[0] */
DATA_IN(0, 8, 1, rgmii_retime_data), /* RXD[1] */
DATA_IN(0, 8, 2, rgmii_retime_data), /* RXD[2] */
DATA_IN(0, 8, 3, rgmii_retime_data), /* RXD[3] */
DATA_IN(0, 9, 0, rgmii_retime_data), /* RXDV */
CLOCK_IN(0, 9, 2, rgmii_retime_clock), /* RXCLK */
PHY_CLOCK(0, 9, 3, rgmii_gtx_retime_clock),/* PHYCLK */
},
.sysconfs_num = 3,
.sysconfs = (struct stm_pad_sysconf []) {
/* EN_GMAC0 */
STM_PAD_SYS_CFG_BANK(2, 53, 0, 0, 1),
/* MIIx_PHY_SEL */
STM_PAD_SYS_CFG_BANK(2, 27, 2, 4, 1),
/* ENMIIx */
STM_PAD_SYS_CFG_BANK(2, 27, 5, 5, 1),
},
},
[1] = {
.gpios_num = 18,
.gpios = (struct stm_pad_gpio []) {
PHY_CLOCK(1, 15, 5, rgmii_gtx_retime_clock),/* PHYCLK */
BYPASS_IN(1, 15, 6, rgmii_retime_bypass),/* MDINT */
DATA_OUT(1, 15, 7, rgmii_retime_data), /* TXEN */
DATA_OUT(1, 16, 0, rgmii_retime_data), /* TXD[0] */
DATA_OUT(1, 16, 1, rgmii_retime_data), /* TXD[1] */
DATA_OUT(1, 16, 2, rgmii_retime_data), /* TXD[2] */
DATA_OUT(1, 16, 3, rgmii_retime_data), /* TXD[3] */
CLOCK_IN(1, 17, 0, rgmii_retime_clock), /* TXCLK */
BYPASS_IN(1, 17, 2, rgmii_retime_bypass),/* CRS */
BYPASS_IN(1, 17, 3, rgmii_retime_bypass),/* COL */
BYPASS_OUT(1, 17, 4, rgmii_retime_bypass),/* MDIO */
CLOCK_OUT(1, 17, 5, rgmii_retime_clock),/* MDC */
DATA_IN(1, 17, 6, rgmii_retime_data), /* RXDV */
DATA_IN(1, 18, 0, rgmii_retime_data), /* RXD[0] */
DATA_IN(1, 18, 1, rgmii_retime_data), /* RXD[1] */
DATA_IN(1, 18, 2, rgmii_retime_data), /* RXD[2] */
DATA_IN(1, 18, 3, rgmii_retime_data), /* RXD[3] */
CLOCK_IN(1, 19, 0, rgmii_retime_clock), /* RXCLK */
},
.sysconfs_num = 3,
.sysconfs = (struct stm_pad_sysconf []) {
/* EN_GMAC1 */
STM_PAD_SYS_CFG_BANK(4, 67, 0, 0, 1),
/* MIIx_PHY_SEL */
STM_PAD_SYS_CFG_BANK(4, 23, 2, 4, 1),
/* ENMIIx */
STM_PAD_SYS_CFG_BANK(4, 23, 5, 5, 1),
},
},
};
#define RMII_PHY_CLOCK(_gmac, _port, _pin, _retiming) \
{ \
.gpio = stm_gpio(_port, _pin), \
.direction = stm_pad_gpio_direction_in, \
.function = 2, \
.name = "PHYCLK", \
.priv = &(struct stx7108_pio_config) { \
.retime = &_retiming, \
}, \
}
static struct stx7108_pio_retime_config rmii_txd_retime_bypass = {
.retime = 1,
.clk1notclk0 = 1,
.clknotdata = 0,
.double_edge = 0,
.invertclk = 0,
.delay_input = 0,
};
static struct stx7108_pio_retime_config rmii_mdio_retime_bypass = {
.retime = 0,
.clk1notclk0 = -1,
.clknotdata = 0,
.double_edge = -1,
.invertclk = -1,
.delay_input = 3,
};
static struct stx7108_pio_retime_config rmii_mdc_retime_bypass = {
.retime = 1,
.clk1notclk0 = 0,
.clknotdata = 1,
.double_edge = -1,
.invertclk = 0,
.delay_input = 0,
};
static struct stx7108_pio_retime_config rmii_mdint_retime_bypass = {
.retime = 0,
.clk1notclk0 = -1,
.clknotdata = 0,
.double_edge = -1,
.invertclk = -1,
.delay_input = 0,
};
static struct stx7108_pio_retime_config rmii_rxd_retime_bypass = {
.retime = 1,
.clk1notclk0 = 1,
.clknotdata = 0,
.double_edge = 0,
.invertclk = 0,
.delay_input = 2,
};
static struct stx7108_pio_retime_config rmii_retime_phy_clock = {
.retime = 1,
.clk1notclk0 = 0,
.clknotdata = 1,
.double_edge = -1,
.invertclk = 0,
.delay_input = 0,
};
static struct stm_pad_config stx7108_ethernet_rmii_pad_configs[] = {
[0] = {
.gpios_num = 12,
.gpios = (struct stm_pad_gpio []) {
BYPASS_OUT(0, 6, 0, rmii_txd_retime_bypass),/* TXD[0] */
BYPASS_OUT(0, 6, 1, rmii_txd_retime_bypass),/* TXD[1] */
BYPASS_OUT(0, 7, 0, rmii_txd_retime_bypass),/* TXER */
BYPASS_OUT(0, 7, 1, rmii_txd_retime_bypass),/* TXEN */
BYPASS_IN(0, 7, 7, rmii_mdint_retime_bypass),/* MDINT */
/* MDIO with internal pull-up */
ETH_MDIO_BIDIR(0, 7, 4, rmii_mdio_retime_bypass),
BYPASS_OUT(0, 7, 5, rmii_mdc_retime_bypass),/* MDC */
BYPASS_IN(0, 8, 0, rmii_rxd_retime_bypass),/* RXD.0 */
BYPASS_IN(0, 8, 1, rmii_rxd_retime_bypass),/* RXD.1 */
BYPASS_IN(0, 9, 0, rmii_rxd_retime_bypass),/* RXDV */
BYPASS_IN(0, 9, 1, rmii_rxd_retime_bypass),/* RX_ER */
PHY_CLOCK(0, 9, 3, rmii_retime_phy_clock),/* PHYCLK */
},
.sysconfs_num = 3,
.sysconfs = (struct stm_pad_sysconf []) {
/* EN_GMAC0 */
STM_PAD_SYS_CFG_BANK(2, 53, 0, 0, 1),
/* MIIx_PHY_SEL */
STM_PAD_SYS_CFG_BANK(2, 27, 2, 4, 4),
/* ENMIIx */
STM_PAD_SYS_CFG_BANK(2, 27, 5, 5, 1),
},
},
[1] = {
.gpios_num = 12,
.gpios = (struct stm_pad_gpio []) {
PHY_CLOCK(1, 15, 5, mii_retime_phy_clock),/* PHYCLK */
BYPASS_IN(1, 15, 6, mii_retime_bypass), /* MDINT */
DATA_OUT(1, 15, 7, rmii_retime_data), /* TXEN */
DATA_OUT(1, 16, 0, rmii_retime_data), /* TXD[0] */
DATA_OUT(1, 16, 1, rmii_retime_data), /* TXD[1] */
DATA_OUT(1, 17, 1, rmii_retime_data), /* TXER */
BYPASS_OUT(1, 17, 4, mii_retime_bypass),/* MDIO */
CLOCK_OUT(1, 17, 5, mii_retime_clock), /* MDC */
DATA_IN(1, 17, 6, rmii_retime_data), /* RXDV */
DATA_IN(1, 17, 7, rmii_retime_data), /* RX_ER */
DATA_IN(1, 18, 0, rmii_retime_data), /* RXD[0] */
DATA_IN(1, 18, 1, rmii_retime_data), /* RXD[1] */
},
.sysconfs_num = 3,
.sysconfs = (struct stm_pad_sysconf []) {
/* EN_GMAC1 */
STM_PAD_SYS_CFG_BANK(4, 67, 0, 0, 1),
/* MIIx_PHY_SEL */
STM_PAD_SYS_CFG_BANK(4, 23, 2, 4, 4),
/* ENMIIx */
STM_PAD_SYS_CFG_BANK(4, 23, 5, 5, 1),
},
},
};
static struct stm_pad_config stx7108_ethernet_reverse_mii_pad_configs[] = {
[0] = {
.gpios_num = 20,
.gpios = (struct stm_pad_gpio []) {
DATA_OUT(0, 6, 0, mii_retime_data), /* TXD[0] */
DATA_OUT(0, 6, 1, mii_retime_data), /* TXD[1] */
DATA_OUT(0, 6, 2, mii_retime_data), /* TXD[2] */
DATA_OUT(0, 6, 3, mii_retime_data), /* TXD[3] */
DATA_OUT(0, 7, 0, mii_retime_data), /* TXER */
DATA_OUT(0, 7, 1, mii_retime_data), /* TXEN */
CLOCK_IN(0, 7, 2, mii_retime_clock), /* TXCLK */
BYPASS_OUT(0, 7, 3, mii_retime_bypass), /* COL */
BYPASS_OUT(0, 7, 4, mii_retime_bypass), /* MDIO*/
CLOCK_IN(0, 7, 5, mii_retime_clock), /* MDC */
BYPASS_OUT(0, 7, 6, mii_retime_bypass), /* CRS */
BYPASS_IN(0, 7, 7, mii_retime_bypass), /* MDINT */
DATA_IN(0, 8, 0, mii_retime_data), /* RXD[0] */
DATA_IN(0, 8, 1, mii_retime_data), /* RXD[1] */
DATA_IN(0, 8, 2, mii_retime_data), /* RXD[2] */
DATA_IN(0, 8, 3, mii_retime_data), /* RXD[3] */
DATA_IN(0, 9, 0, mii_retime_data), /* RXDV */
DATA_IN(0, 9, 1, mii_retime_data), /* RX_ER */
CLOCK_IN(0, 9, 2, mii_retime_clock), /* RXCLK */
PHY_CLOCK(0, 9, 3, mii_retime_phy_clock),/* PHYCLK */
},
.sysconfs_num = 3,
.sysconfs = (struct stm_pad_sysconf []) {
/* EN_GMAC0 */
STM_PAD_SYS_CFG_BANK(2, 53, 0, 0, 1),
/* MIIx_PHY_SEL */
STM_PAD_SYS_CFG_BANK(2, 27, 2, 4, 0),
/* ENMIIx */
STM_PAD_SYS_CFG_BANK(2, 27, 5, 5, 0),
},
},
[1] = {
.gpios_num = 20,
.gpios = (struct stm_pad_gpio []) {
PHY_CLOCK(1, 15, 5, mii_retime_phy_clock),/* PHYCLK */
BYPASS_IN(1, 15, 6, mii_retime_bypass), /* MDINT */
DATA_OUT(1, 15, 7, mii_retime_data), /* TXEN */
DATA_OUT(1, 16, 0, mii_retime_data), /* TXD[0] */
DATA_OUT(1, 16, 1, mii_retime_data), /* TXD[1] */
DATA_OUT(1, 16, 2, mii_retime_data), /* TXD[2] */
DATA_OUT(1, 16, 3, mii_retime_data), /* TXD[3] */
CLOCK_IN(1, 17, 0, mii_retime_clock), /* TXCLK */
DATA_OUT(1, 17, 1, mii_retime_data), /* TXER */
BYPASS_OUT(1, 17, 2, mii_retime_bypass),/* CRS */
BYPASS_OUT(1, 17, 3, mii_retime_bypass),/* COL */
BYPASS_OUT(1, 17, 4, mii_retime_bypass),/* MDIO */
CLOCK_IN(1, 17, 5, mii_retime_clock), /* MDC */
DATA_IN(1, 17, 6, mii_retime_data), /* RXDV */
DATA_IN(1, 17, 7, mii_retime_data), /* RX_ER */
DATA_IN(1, 18, 0, mii_retime_data), /* RXD[0] */
DATA_IN(1, 18, 1, mii_retime_data), /* RXD[1] */
DATA_IN(1, 18, 2, mii_retime_data), /* RXD[2] */
DATA_IN(1, 18, 3, mii_retime_data), /* RXD[3] */
CLOCK_IN(1, 19, 0, mii_retime_clock), /* RXCLK */
},
.sysconfs_num = 3,
.sysconfs = (struct stm_pad_sysconf []) {
/* EN_GMAC1 */
STM_PAD_SYS_CFG_BANK(4, 67, 0, 0, 1),
/* MIIx_PHY_SEL */
STM_PAD_SYS_CFG_BANK(4, 23, 2, 4, 0),
/* ENMIIx */
STM_PAD_SYS_CFG_BANK(4, 23, 5, 5, 1),
},
},
};
static void stx7108_ethernet_rmii_speed(void *bsp_priv, unsigned int speed)
{
struct sysconf_field *mac_speed_sel = bsp_priv;
sysconf_write(mac_speed_sel, (speed == SPEED_100) ? 1 : 0);
}
static void stx7108_ethernet_gtx_speed(void *priv, unsigned int speed)
{
void (*txclk_select)(int txclk_250_not_25_mhz) = priv;
if (txclk_select)
txclk_select(speed == SPEED_1000);
}
static struct plat_stmmacenet_data stx7108_ethernet_platform_data[] = {
{
.pbl = 32,
.has_gmac = 1,
.enh_desc = 1,
.tx_coe = 1,
.bugged_jumbo =1,
.pmt = 1,
.init = &stmmac_claim_resource,
}, {
.pbl = 32,
.has_gmac = 1,
.enh_desc = 1,
.tx_coe = 1,
.bugged_jumbo =1,
.pmt = 1,
.init = &stmmac_claim_resource,
}
};
static struct platform_device stx7108_ethernet_devices[] = {
{
.name = "stmmaceth",
.id = 0,
.num_resources = 2,
.resource = (struct resource[]) {
STM_PLAT_RESOURCE_MEM(0xfda88000, 0x8000),
STM_PLAT_RESOURCE_IRQ_NAMED("macirq", ILC_IRQ(21), -1),
},
.dev.platform_data = &stx7108_ethernet_platform_data[0],
}, {
.name = "stmmaceth",
.id = 1,
.num_resources = 2,
.resource = (struct resource[]) {
STM_PLAT_RESOURCE_MEM(0xfe730000, 0x8000),
STM_PLAT_RESOURCE_IRQ_NAMED("macirq", ILC_IRQ(23), -1),
},
.dev.platform_data = &stx7108_ethernet_platform_data[1],
}
};
#define GMAC_AHB_CONFIG 0x7000
static void stx7108_ethernet_bus_setup(void __iomem *ioaddr)
{
/* Configure the bridge to generate more efficient STBus traffic.
*
* Cut Version | Ethernet AD_CONFIG[21:0]
* ---------------------------------------
* 1.1 | 0x00264006
* 2.0 | 0x00264207
*/
if (boot_cpu_data.cut_major == 1)
writel(0x00264006, ioaddr + GMAC_AHB_CONFIG);
else if (boot_cpu_data.cut_major == 2)
writel(0x00264207, ioaddr + GMAC_AHB_CONFIG);
}
void __init stx7108_configure_ethernet(int port,
struct stx7108_ethernet_config *config)
{
static int configured[ARRAY_SIZE(stx7108_ethernet_devices)];
struct stx7108_ethernet_config default_config;
struct plat_stmmacenet_data *plat_data;
struct stm_pad_config *pad_config;
int interface;
BUG_ON(port < 0 || port >= ARRAY_SIZE(stx7108_ethernet_devices));
BUG_ON(configured[port]++);
if (!config)
config = &default_config;
plat_data = &stx7108_ethernet_platform_data[port];
switch (config->mode) {
case stx7108_ethernet_mode_mii:
pad_config = &stx7108_ethernet_mii_pad_configs[port];
if (config->ext_clk)
stm_pad_set_pio_ignored(pad_config, "PHYCLK");
else
stm_pad_set_pio_out(pad_config, "PHYCLK", 1 + port);
interface = PHY_INTERFACE_MODE_MII;
break;
case stx7108_ethernet_mode_gmii:
pad_config = &stx7108_ethernet_gmii_pad_configs[port];
stm_pad_set_pio_ignored(pad_config, "PHYCLK");
interface = PHY_INTERFACE_MODE_GMII;
break;
case stx7108_ethernet_mode_gmii_gtx:
pad_config = &stx7108_ethernet_gmii_pad_configs[port];
stm_pad_set_pio_out(pad_config, "PHYCLK", 1 + port);
plat_data->fix_mac_speed = stx7108_ethernet_gtx_speed;
plat_data->bsp_priv = config->txclk_select;
interface = PHY_INTERFACE_MODE_GMII;
break;
case stx7108_ethernet_mode_rgmii_gtx:
/* This mode is similar to GMII (GTX) except the data
* buses are reduced down to 4 bits and the 2 error
* signals are removed. The data rate is maintained by
* using both edges of the clock. This also explains
* the different retiming configuration for this mode.
*/
pad_config = &stx7108_ethernet_rgmii_pad_configs[port];
stm_pad_set_pio_out(pad_config, "PHYCLK", 1 + port);
plat_data->fix_mac_speed = stx7108_ethernet_gtx_speed;
plat_data->bsp_priv = config->txclk_select;
interface = PHY_INTERFACE_MODE_RGMII;
break;
case stx7108_ethernet_mode_rmii: /* GMAC1 only tested */
pad_config = &stx7108_ethernet_rmii_pad_configs[port];
if (config->ext_clk)
stm_pad_set_pio_in(pad_config, "PHYCLK", 2 + port);
else {
unsigned long phy_clk_rate;
struct clk *phy_clk = clk_get(NULL, "CLKA_ETH_PHY_1");
BUG_ON(!phy_clk);
stm_pad_set_pio_out(pad_config, "PHYCLK", 1 + port);
phy_clk_rate = 50000000;
clk_set_rate(phy_clk, phy_clk_rate);
}
plat_data->fix_mac_speed = stx7108_ethernet_rmii_speed;
/* MIIx_MAC_SPEED_SEL */
if (port == 0)
plat_data->bsp_priv = sysconf_claim(SYS_CFG_BANK2,
27, 1, 1, "stmmac");
else
plat_data->bsp_priv = sysconf_claim(SYS_CFG_BANK4,
23, 1, 1, "stmmac");
interface = PHY_INTERFACE_MODE_RMII;
break;
case stx7108_ethernet_mode_reverse_mii:
pad_config = &stx7108_ethernet_reverse_mii_pad_configs[port];
if (config->ext_clk)
stm_pad_set_pio_ignored(pad_config, "PHYCLK");
else
stm_pad_set_pio_out(pad_config, "PHYCLK", 1 + port);
interface = PHY_INTERFACE_MODE_MII;
break;
default:
BUG();
return;
}
stx7108_ethernet_platform_data[port].bus_setup =
stx7108_ethernet_bus_setup;
plat_data->custom_cfg = (void *) pad_config;
plat_data->interface = interface;
plat_data->bus_id = config->phy_bus;
plat_data->phy_addr = config->phy_addr;
plat_data->mdio_bus_data = config->mdio_bus_data;
stx7108_pio_dump_pad_config(stx7108_ethernet_devices[port].name,
port, pad_config);
platform_device_register(&stx7108_ethernet_devices[port]);
}
/* USB resources ---------------------------------------------------------- */
static u64 stx7108_usb_dma_mask = DMA_BIT_MASK(32);
#define USB_HOST_PWR "USB_HOST_PWR"
#define USB_PHY_INDCSHIFT "USB_PHY_INDCSHIFT"
#define USB_PHY_INEDGECTL "USB_PHY_INEDGECTL"
#define USB_PWR_ACK "USB_PWR_ACK"
static int stx7108_usb_init(struct stm_device_state *device_state)
{
/* USB edge rise and DC shift - STLinux Bugzilla 10991 */
stm_device_sysconf_write(device_state, USB_PHY_INDCSHIFT, 0);
stm_device_sysconf_write(device_state, USB_PHY_INEDGECTL, 1);
return 0;
}
static void stx7108_usb_power(struct stm_device_state *device_state,
enum stm_device_power_state power)
{
int i;
int value = (power == stm_device_power_on) ? 0 : 1;
stm_device_sysconf_write(device_state, USB_HOST_PWR, value);
for (i = 5; i; --i) {
if (stm_device_sysconf_read(device_state, USB_PWR_ACK)
== value)
break;
mdelay(10);
}
}
static struct stm_plat_usb_data stx7108_usb_platform_data[] = {
[0] = {
.flags = STM_PLAT_USB_FLAGS_STRAP_8BIT |
STM_PLAT_USB_FLAGS_STBUS_CONFIG_THRESHOLD128,
.device_config = &(struct stm_device_config){
.init = stx7108_usb_init,
.power = stx7108_usb_power,
.sysconfs_num = 4,
.sysconfs = (struct stm_device_sysconf []) {
STM_DEVICE_SYS_CFG_BANK(4, 46, 0, 0,
USB_HOST_PWR),
STM_DEVICE_SYS_CFG_BANK(4, 44, 0, 0,
USB_PHY_INDCSHIFT),
STM_DEVICE_SYS_CFG_BANK(4, 44, 3, 3,
USB_PHY_INEDGECTL),
STM_DEVICE_SYS_STA_BANK(4, 2, 0, 0,
USB_PWR_ACK),
},
.pad_config = &(struct stm_pad_config) {
.gpios_num = 2,
.gpios = (struct stm_pad_gpio []) {
/* Overcurrent detection */
STM_PAD_PIO_IN(23, 6, 1),
/* USB power enable */
STM_PAD_PIO_OUT(23, 7, 1),
},
},
},
},
[1] = {
.flags = STM_PLAT_USB_FLAGS_STRAP_8BIT |
STM_PLAT_USB_FLAGS_STBUS_CONFIG_THRESHOLD128,
.device_config = &(struct stm_device_config){
.init = stx7108_usb_init,
.power = stx7108_usb_power,
.sysconfs_num = 4,
.sysconfs = (struct stm_device_sysconf []) {
STM_DEVICE_SYS_CFG_BANK(4, 46, 1, 1,
USB_HOST_PWR),
STM_DEVICE_SYS_CFG_BANK(4, 44, 1, 1,
USB_PHY_INDCSHIFT),
STM_DEVICE_SYS_CFG_BANK(4, 44, 4, 4,
USB_PHY_INEDGECTL),
STM_DEVICE_SYS_STA_BANK(4, 2, 1, 1,
USB_PWR_ACK),
},
.pad_config = &(struct stm_pad_config) {
.gpios_num = 2,
.gpios = (struct stm_pad_gpio []) {
/* Overcurrent detection */
STM_PAD_PIO_IN(24, 0, 1),
/* USB power enable */
STM_PAD_PIO_OUT(24, 1, 1),
},
},
},
},
[2] = {
.flags = STM_PLAT_USB_FLAGS_STRAP_8BIT |
STM_PLAT_USB_FLAGS_STBUS_CONFIG_THRESHOLD128,
.device_config = &(struct stm_device_config){
.init = stx7108_usb_init,
.power = stx7108_usb_power,
.sysconfs_num = 4,
.sysconfs = (struct stm_device_sysconf []) {
STM_DEVICE_SYS_CFG_BANK(4, 46, 2, 2,
USB_HOST_PWR),
STM_DEVICE_SYS_CFG_BANK(4, 44, 2, 2,
USB_PHY_INDCSHIFT),
STM_DEVICE_SYS_CFG_BANK(4, 44, 5, 5,
USB_PHY_INEDGECTL),
STM_DEVICE_SYS_STA_BANK(4, 2, 2, 2,
USB_PWR_ACK),
},
.pad_config = &(struct stm_pad_config) {
.gpios_num = 2,
.gpios = (struct stm_pad_gpio []) {
/* Overcurrent detection */
STM_PAD_PIO_IN(24, 2, 1),
/* USB power enable */
STM_PAD_PIO_OUT(24, 3, 1),
},
},
},
},
};
static struct platform_device stx7108_usb_devices[] = {
[0] = {
.name = "stm-usb",
.id = 0,
.dev = {
.dma_mask = &stx7108_usb_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &stx7108_usb_platform_data[0],
},
.num_resources = 6,
.resource = (struct resource[]) {
STM_PLAT_RESOURCE_MEM_NAMED("wrapper",
0xfe000000, 0x100),
STM_PLAT_RESOURCE_MEM_NAMED("ohci",
0xfe0ffc00, 0x100),
STM_PLAT_RESOURCE_MEM_NAMED("ehci",
0xfe0ffe00, 0x100),
STM_PLAT_RESOURCE_MEM_NAMED("protocol",
0xfe0fff00, 0x100),
STM_PLAT_RESOURCE_IRQ_NAMED("ehci", ILC_IRQ(59), -1),
STM_PLAT_RESOURCE_IRQ_NAMED("ohci", ILC_IRQ(62), -1),
},
},
[1] = {
.name = "stm-usb",
.id = 1,
.dev = {
.dma_mask = &stx7108_usb_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &stx7108_usb_platform_data[1],
},
.num_resources = 6,
.resource = (struct resource[]) {
STM_PLAT_RESOURCE_MEM_NAMED("wrapper",
0xfe100000, 0x100),
STM_PLAT_RESOURCE_MEM_NAMED("ohci",
0xfe1ffc00, 0x100),
STM_PLAT_RESOURCE_MEM_NAMED("ehci",
0xfe1ffe00, 0x100),
STM_PLAT_RESOURCE_MEM_NAMED("protocol",
0xfe1fff00, 0x100),
STM_PLAT_RESOURCE_IRQ_NAMED("ehci", ILC_IRQ(60), -1),
STM_PLAT_RESOURCE_IRQ_NAMED("ohci", ILC_IRQ(63), -1),
},
},
[2] = {
.name = "stm-usb",
.id = 2,
.dev = {
.dma_mask = &stx7108_usb_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &stx7108_usb_platform_data[2],
},
.num_resources = 6,
.resource = (struct resource[]) {
STM_PLAT_RESOURCE_MEM_NAMED("wrapper",
0xfe200000, 0x100),
STM_PLAT_RESOURCE_MEM_NAMED("ohci",
0xfe2ffc00, 0x100),
STM_PLAT_RESOURCE_MEM_NAMED("ehci",
0xfe2ffe00, 0x100),
STM_PLAT_RESOURCE_MEM_NAMED("protocol",
0xfe2fff00, 0x100),
STM_PLAT_RESOURCE_IRQ_NAMED("ehci", ILC_IRQ(61), -1),
STM_PLAT_RESOURCE_IRQ_NAMED("ohci", ILC_IRQ(64), -1),
},
},
};
void __init stx7108_configure_usb(int port)
{
static int osc_initialized;
static int configured[ARRAY_SIZE(stx7108_usb_devices)];
struct sysconf_field *sc;
BUG_ON(port < 0 || port >= ARRAY_SIZE(stx7108_usb_devices));
BUG_ON(configured[port]++);
if (!osc_initialized++) {
/* USB2TRIPPHY_OSCIOK */
sc = sysconf_claim(SYS_CFG_BANK4, 44, 6, 6, "USB");
sysconf_write(sc, 1);
}
platform_device_register(&stx7108_usb_devices[port]);
}
/* MiPHY resources -------------------------------------------------------- */
#define MAX_PORTS 2
/*
* NOTE: In 7108 SYSCONF BANK0 the register numbering jumps from 8 to
* 12, which breaks the sysconf drivers. So when accessing registers
* 12, 13, 14 we need to manually substract 3, as generic sysconf
* infrastructure does not takecare of such deviations.
*/
#define BANK0_REG(reg) (reg - 3)
#define PCIE_BASE 0xfe780000
#define PCIE_UPORT_BASE (PCIE_BASE + 0x4000)
#define PCIE_UPORT_REG_SIZE (0xFF)
static __initdata int stx7108_using_uport;
static enum miphy_mode stx7108_miphy_modes[2];
static struct sysconf_field *sc_pcie_mp_select;
static struct sysconf_field *sc_miphy_reset[MAX_PORTS];
static void stx7108_pcie_mp_select(int port)
{
BUG_ON(port < 0 || port > 1);
sysconf_write(sc_pcie_mp_select, port);
}
struct stm_plat_pcie_mp_data stx7108_pcie_mp_platform_data = {
.miphy_first = 0,
.miphy_count = 2,
.miphy_modes = stx7108_miphy_modes,
.mp_select = stx7108_pcie_mp_select,
};
static struct platform_device stx7108_pcie_mp_device = {
.name = "pcie-mp",
.id = 0,
.num_resources = 1,
.resource = (struct resource[]) {
[0] = {
.start = PCIE_UPORT_BASE,
.end = PCIE_UPORT_BASE + PCIE_UPORT_REG_SIZE,
.flags = IORESOURCE_MEM,
},
},
.dev = {
.platform_data = &stx7108_pcie_mp_platform_data,
}
};
/* TAP private data */
static struct stm_tap_sysconf tap_sysconf = {
.tck = { SYS_CFG_BANK1, 3, 20, 20},
.tms = { SYS_CFG_BANK1, 3, 23, 23},
.tdi = { SYS_CFG_BANK1, 3, 22, 22},
.tdo = { SYS_STA_BANK1, 4, 1, 1},
.tap_en = { SYS_CFG_BANK1, 3, 13, 13},
.trstn = { SYS_CFG_BANK1, 3, 21, 21},
};
static struct stm_plat_tap_data stx7108_tap_platform_data = {
.miphy_first = 0,
.miphy_count = 2,
.miphy_modes = stx7108_miphy_modes,
.tap_sysconf = &tap_sysconf,
};
static struct platform_device stx7108_tap_device = {
.name = "stm-miphy-tap",
.id = 0,
.num_resources = 0,
.dev = {
.platform_data = &stx7108_tap_platform_data,
}
};
static int __init stx7108_configure_miphy_uport(void)
{
struct sysconf_field *sc_miphy1_ref_clk,
*sc_sata1_hc_reset, *sc_sata_pcie_sel,
*sc_sata1_hc_srst;
sc_pcie_mp_select = sysconf_claim(SYS_CFG_BANK4, 70,
0, 0, "pcie-mp");
BUG_ON(!sc_pcie_mp_select);
/* SATA0_SOFT_RST_N_SATA: sata0_soft_rst_n_sata. */
/* Useless documentation R us */
sc_sata1_hc_srst = sysconf_claim(SYS_CFG_BANK4, 45, 4, 4, "MiPHY");
BUG_ON(!sc_sata1_hc_srst);
/* SELECT_SATA: select_sata. */
sc_sata_pcie_sel = sysconf_claim(SYS_CFG_BANK4, 68, 1, 1, "MiPHY");
BUG_ON(!sc_sata_pcie_sel);
/* SATAPHY1_OSC_FORCE_EXT: SATAphy1_osc_force_ext. */
sc_miphy1_ref_clk = sysconf_claim(SYS_CFG_BANK4, 68, 2, 2, "MiPHY");
BUG_ON(!sc_miphy1_ref_clk);
/* RESETGEN_CONF0_1: Active low Software Reset for peripherals <31:0>.
* NOTE documenation appears to be wrong!
* RST_PER_N_30: SATA_2XHOST */
sc_sata1_hc_reset = sysconf_claim(SYS_CFG_BANK0,
BANK0_REG(12), 30, 30, "SATA");
BUG_ON(!sc_sata1_hc_reset);
/* Deassert Soft Reset to SATA0 */
sysconf_write(sc_sata1_hc_srst, 1);
/* If the 100MHz xtal for PCIe is present, then the microport interface
* will already have a clock, so there is no need to flip to the 30MHz
* clock here. If it isn't then we have to switch miphy lane 1 to use
* the 30MHz clock, as otherwise we will not be able to talk to lane 0
* since the uport interface itself is clocked from lane1
*/
if (stx7108_miphy_modes[1] != PCIE_MODE) {
/* Put MiPHY1 in reset - rst_per_n[32] */
sysconf_write(sc_miphy_reset[1], 0);
/* Put SATA1 HC in reset - rst_per_n[30] */
sysconf_write(sc_sata1_hc_reset, 0);
/* Now switch to Phy interface to SATA HC not PCIe HC */
sysconf_write(sc_sata_pcie_sel, 1);
/* Select the Uport to use MiPHY1 */
stx7108_pcie_mp_select(1);
/* Take SATA1 HC out of reset - rst_per_n[30] */
sysconf_write(sc_sata1_hc_reset, 1);
/* MiPHY1 needs to be using the MiPHY0 reference clock */
sysconf_write(sc_miphy1_ref_clk, 1);
/* Take MiPHY1 out of reset - rst_per_n[32] */
sysconf_write(sc_miphy_reset[1], 1);
}
stx7108_using_uport = 1;
return platform_device_register(&stx7108_pcie_mp_device);
}
static int __init stx7108_configure_miphy_tap(void)
{
return platform_device_register(&stx7108_tap_device);
}
void __init stx7108_configure_miphy(struct stx7108_miphy_config *config)
{
int err = 0;
memcpy(stx7108_miphy_modes, config->modes, sizeof(stx7108_miphy_modes));
/* RESETGEN_CONF0_1: Active low Software Reset for peripherals <31:0>.
* NOTE documenation appears to be wrong!
* RST_PER_N_31: SATA PHI 0 */
sc_miphy_reset[0] = sysconf_claim(SYS_CFG_BANK0,
BANK0_REG(12), 31, 31, "SATA");
BUG_ON(!sc_miphy_reset[0]);
/* RESETGEN_CONF0_2: Active low Software Reset for peripherals <63:32>.
* NOTE documenation appears to be wrong!
* RST_PER_N_32: SATA PHI 1 */
sc_miphy_reset[1] = sysconf_claim(SYS_CFG_BANK0,
BANK0_REG(13), 0, 0, "SATA");
BUG_ON(!sc_miphy_reset[1]);
if (cpu_data->cut_major >= 2 && !config->force_jtag)
err = stx7108_configure_miphy_uport();
else
err = stx7108_configure_miphy_tap();
}
/* SATA resources --------------------------------------------------------- */
static struct sysconf_field *sc_sata_hc_pwr[MAX_PORTS];
static void stx7108_restart_sata(int port)
{
/* This part of the code is executed for ESD recovery.
* However...
* It's Not supported on CUT1.0 As we have to reset both Lanes if there
* is a problem with single lane. As the MiPHY Code for JTAG_IF is
* not independent of lanes which will potentially results in a
* recursive resets among lane-0 and lane-1. This behaviour might
* make both disks unavailable.
*/
BUG_ON(cpu_data->cut_major < 2);
/* Reset the SATA Host and MiPHY */
sysconf_write(sc_sata_hc_pwr[port], 1);
sysconf_write(sc_miphy_reset[port], 0);
if (port == 1)
stx7108_pcie_mp_select(1);
msleep(1);
sysconf_write(sc_sata_hc_pwr[port], 0);
sysconf_write(sc_miphy_reset[port], 1);
}
static void stx7108_sata_power(struct stm_device_state *device_state,
int port, enum stm_device_power_state power)
{
int value = (power == stm_device_power_on) ? 0 : 1;
int i;
sysconf_write(sc_sata_hc_pwr[port], value);
for (i = 5; i; --i) {
if (stm_device_sysconf_read(device_state, "SATA_ACK")
== value)
break;
mdelay(10);
}
}
static void stx7108_sata0_power(struct stm_device_state *device_state,
enum stm_device_power_state power)
{
stx7108_sata_power(device_state, 0, power);
}
static void stx7108_sata1_power(struct stm_device_state *device_state,
enum stm_device_power_state power)
{
stx7108_sata_power(device_state, 1, power);
}
static struct platform_device stx7108_sata_devices[] = {
[0] = {
.name = "sata-stm",
.id = 0,
.dev.platform_data = &(struct stm_plat_sata_data) {
.phy_init = 0,
.pc_glue_logic_init = 0,
.only_32bit = 0,
.oob_wa = 1,
.port_num = 0,
.miphy_num = 0,
.device_config = &(struct stm_device_config){
.power = stx7108_sata0_power,
.sysconfs_num = 1,
.sysconfs = (struct stm_device_sysconf []) {
STM_DEVICE_SYS_STA_BANK(4, 2, 3, 3,
"SATA_ACK"),
},
},
},
.num_resources = 3,
.resource = (struct resource[]) {
STM_PLAT_RESOURCE_MEM(0xfe768000, 0x1000),
STM_PLAT_RESOURCE_IRQ_NAMED("hostc", ILC_IRQ(57), -1),
STM_PLAT_RESOURCE_IRQ_NAMED("dmac", ILC_IRQ(55), -1),
},
},
[1] = {
.name = "sata-stm",
.id = 1,
.dev.platform_data = &(struct stm_plat_sata_data) {
.phy_init = 0,
.pc_glue_logic_init = 0,
.only_32bit = 0,
.oob_wa = 1,
.port_num = 1,
.miphy_num = 1,
.device_config = &(struct stm_device_config){
.power = stx7108_sata1_power,
.sysconfs_num = 1,
.sysconfs = (struct stm_device_sysconf []) {
STM_DEVICE_SYS_STA_BANK(4, 2, 4, 4,
"SATA_ACK"),
},
},
},
.num_resources = 3,
.resource = (struct resource[]) {
STM_PLAT_RESOURCE_MEM(0xfe769000, 0x1000),
STM_PLAT_RESOURCE_IRQ_NAMED("hostc", ILC_IRQ(58), -1),
STM_PLAT_RESOURCE_IRQ_NAMED("dmac", ILC_IRQ(56), -1),
},
}
};
void __init stx7108_configure_sata(int port, struct stx7108_sata_config *config)
{
struct stm_plat_sata_data *sata_data;
static int initialized[ARRAY_SIZE(stx7108_sata_devices)];
sata_data = stx7108_sata_devices[port].dev.platform_data;
BUG_ON(initialized[port]++);
sc_sata_hc_pwr[port] = sysconf_claim(SYS_CFG_BANK4, 46,
3+port, 3+port, "SATA");
if (!sc_sata_hc_pwr[port]) {
BUG();
return;
}
/* If we're using the uPort then we can reset the two lanes
* independently. */
if (stx7108_using_uport)
sata_data->host_restart = stx7108_restart_sata;
platform_device_register(&stx7108_sata_devices[port]);
}