satip-axe/kernel/sound/soc/imx/mx27vis_wm8974.c
2015-03-26 17:24:57 +01:00

318 lines
7.2 KiB
C

/*
* mx27vis_wm8974.c -- SoC audio for mx27vis
*
* Copyright 2009 Vista Silicon S.L.
* Author: Javier Martin
* javier.martin@vista-silicon.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/device.h>
#include <linux/i2c.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include "../codecs/wm8974.h"
#include "mx1_mx2-pcm.h"
#include "mxc-ssi.h"
#include <mach/gpio.h>
#include <mach/iomux.h>
#define IGNORED_ARG 0
static struct snd_soc_card mx27vis;
/**
* This function connects SSI1 (HPCR1) as slave to
* SSI1 external signals (PPCR1)
* As slave, HPCR1 must set TFSDIR and TCLKDIR as inputs from
* port 4
*/
void audmux_connect_1_4(void)
{
pr_debug("AUDMUX: normal operation mode\n");
/* Reset HPCR1 and PPCR1 */
DAM_HPCR1 = 0x00000000;
DAM_PPCR1 = 0x00000000;
/* set to synchronous */
DAM_HPCR1 |= AUDMUX_HPCR_SYN;
DAM_PPCR1 |= AUDMUX_PPCR_SYN;
/* set Rx sources 1 <--> 4 */
DAM_HPCR1 |= AUDMUX_HPCR_RXDSEL(3); /* port 4 */
DAM_PPCR1 |= AUDMUX_PPCR_RXDSEL(0); /* port 1 */
/* set Tx frame and Clock direction and source 4 --> 1 output */
DAM_HPCR1 |= AUDMUX_HPCR_TFSDIR | AUDMUX_HPCR_TCLKDIR;
DAM_HPCR1 |= AUDMUX_HPCR_TFCSEL(3); /* TxDS and TxCclk from port 4 */
return;
}
static int mx27vis_hifi_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
unsigned int pll_out = 0, bclk = 0, fmt = 0, mclk = 0;
int ret = 0;
/*
* The WM8974 is better at generating accurate audio clocks than the
* MX27 SSI controller, so we will use it as master when we can.
*/
switch (params_rate(params)) {
case 8000:
fmt = SND_SOC_DAIFMT_CBM_CFM;
mclk = WM8974_MCLKDIV_12;
pll_out = 24576000;
break;
case 16000:
fmt = SND_SOC_DAIFMT_CBM_CFM;
pll_out = 12288000;
break;
case 48000:
fmt = SND_SOC_DAIFMT_CBM_CFM;
bclk = WM8974_BCLKDIV_4;
pll_out = 12288000;
break;
case 96000:
fmt = SND_SOC_DAIFMT_CBM_CFM;
bclk = WM8974_BCLKDIV_2;
pll_out = 12288000;
break;
case 11025:
fmt = SND_SOC_DAIFMT_CBM_CFM;
bclk = WM8974_BCLKDIV_16;
pll_out = 11289600;
break;
case 22050:
fmt = SND_SOC_DAIFMT_CBM_CFM;
bclk = WM8974_BCLKDIV_8;
pll_out = 11289600;
break;
case 44100:
fmt = SND_SOC_DAIFMT_CBM_CFM;
bclk = WM8974_BCLKDIV_4;
mclk = WM8974_MCLKDIV_2;
pll_out = 11289600;
break;
case 88200:
fmt = SND_SOC_DAIFMT_CBM_CFM;
bclk = WM8974_BCLKDIV_2;
pll_out = 11289600;
break;
}
/* set codec DAI configuration */
ret = codec_dai->ops->set_fmt(codec_dai,
SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_IF |
SND_SOC_DAIFMT_SYNC | fmt);
if (ret < 0) {
printk(KERN_ERR "Error from codec DAI configuration\n");
return ret;
}
/* set cpu DAI configuration */
ret = cpu_dai->ops->set_fmt(cpu_dai,
SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_SYNC | fmt);
if (ret < 0) {
printk(KERN_ERR "Error from cpu DAI configuration\n");
return ret;
}
/* Put DC field of STCCR to 1 (not zero) */
ret = cpu_dai->ops->set_tdm_slot(cpu_dai, 0, 2);
/* set the SSI system clock as input */
ret = cpu_dai->ops->set_sysclk(cpu_dai, IMX_SSP_SYS_CLK, 0,
SND_SOC_CLOCK_IN);
if (ret < 0) {
printk(KERN_ERR "Error when setting system SSI clk\n");
return ret;
}
/* set codec BCLK division for sample rate */
ret = codec_dai->ops->set_clkdiv(codec_dai, WM8974_BCLKDIV, bclk);
if (ret < 0) {
printk(KERN_ERR "Error when setting BCLK division\n");
return ret;
}
/* codec PLL input is 25 MHz */
ret = codec_dai->ops->set_pll(codec_dai, IGNORED_ARG,
25000000, pll_out);
if (ret < 0) {
printk(KERN_ERR "Error when setting PLL input\n");
return ret;
}
/*set codec MCLK division for sample rate */
ret = codec_dai->ops->set_clkdiv(codec_dai, WM8974_MCLKDIV, mclk);
if (ret < 0) {
printk(KERN_ERR "Error when setting MCLK division\n");
return ret;
}
return 0;
}
static int mx27vis_hifi_hw_free(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
/* disable the PLL */
return codec_dai->ops->set_pll(codec_dai, IGNORED_ARG, 0, 0);
}
/*
* mx27vis WM8974 HiFi DAI opserations.
*/
static struct snd_soc_ops mx27vis_hifi_ops = {
.hw_params = mx27vis_hifi_hw_params,
.hw_free = mx27vis_hifi_hw_free,
};
static int mx27vis_suspend(struct platform_device *pdev, pm_message_t state)
{
return 0;
}
static int mx27vis_resume(struct platform_device *pdev)
{
return 0;
}
static int mx27vis_probe(struct platform_device *pdev)
{
int ret = 0;
ret = get_ssi_clk(0, &pdev->dev);
if (ret < 0) {
printk(KERN_ERR "%s: cant get ssi clock\n", __func__);
return ret;
}
return 0;
}
static int mx27vis_remove(struct platform_device *pdev)
{
put_ssi_clk(0);
return 0;
}
static struct snd_soc_dai_link mx27vis_dai[] = {
{ /* Hifi Playback*/
.name = "WM8974",
.stream_name = "WM8974 HiFi",
.cpu_dai = &imx_ssi_pcm_dai[0],
.codec_dai = &wm8974_dai,
.ops = &mx27vis_hifi_ops,
},
};
static struct snd_soc_card mx27vis = {
.name = "mx27vis",
.platform = &mx1_mx2_soc_platform,
.probe = mx27vis_probe,
.remove = mx27vis_remove,
.suspend_pre = mx27vis_suspend,
.resume_post = mx27vis_resume,
.dai_link = mx27vis_dai,
.num_links = ARRAY_SIZE(mx27vis_dai),
};
static struct snd_soc_device mx27vis_snd_devdata = {
.card = &mx27vis,
.codec_dev = &soc_codec_dev_wm8974,
};
static struct platform_device *mx27vis_snd_device;
/* Temporal definition of board specific behaviour */
void gpio_ssi_active(int ssi_num)
{
int ret = 0;
unsigned int ssi1_pins[] = {
PC20_PF_SSI1_FS,
PC21_PF_SSI1_RXD,
PC22_PF_SSI1_TXD,
PC23_PF_SSI1_CLK,
};
unsigned int ssi2_pins[] = {
PC24_PF_SSI2_FS,
PC25_PF_SSI2_RXD,
PC26_PF_SSI2_TXD,
PC27_PF_SSI2_CLK,
};
if (ssi_num == 0)
ret = mxc_gpio_setup_multiple_pins(ssi1_pins,
ARRAY_SIZE(ssi1_pins), "USB OTG");
else
ret = mxc_gpio_setup_multiple_pins(ssi2_pins,
ARRAY_SIZE(ssi2_pins), "USB OTG");
if (ret)
printk(KERN_ERR "Error requesting ssi %x pins\n", ssi_num);
}
static int __init mx27vis_init(void)
{
int ret;
mx27vis_snd_device = platform_device_alloc("soc-audio", -1);
if (!mx27vis_snd_device)
return -ENOMEM;
platform_set_drvdata(mx27vis_snd_device, &mx27vis_snd_devdata);
mx27vis_snd_devdata.dev = &mx27vis_snd_device->dev;
ret = platform_device_add(mx27vis_snd_device);
if (ret) {
printk(KERN_ERR "ASoC: Platform device allocation failed\n");
platform_device_put(mx27vis_snd_device);
}
/* WM8974 uses SSI1 (HPCR1) via AUDMUX port 4 for audio (PPCR1) */
gpio_ssi_active(0);
audmux_connect_1_4();
return ret;
}
static void __exit mx27vis_exit(void)
{
/* We should call some "ssi_gpio_inactive()" properly */
}
module_init(mx27vis_init);
module_exit(mx27vis_exit);
MODULE_AUTHOR("Javier Martin, javier.martin@vista-silicon.com");
MODULE_DESCRIPTION("ALSA SoC WM8974 mx27vis");
MODULE_LICENSE("GPL");